Hey folks got a HTC HERM200 (TyTn) and the unit will not connect with activesync, so it will not do a rom upgrade, and I can connect in Bootloader using MTTY and if i do a info ? it tells me it has a lot of BAD BLOCKS, this is what it shows,
Block 0x0(0) is Reversed block
Block 0x1(1) is Reversed block
Block 0x2(2) is Reversed block
Block 0x3(3) is Reversed block
Block 0x4(4) is Reversed block
Block 0x5(5) is Reversed block
Block 0x6(6) is Reversed block
Block 0x7(7) is Reversed block
Block 0x8(8) is Reversed block
Block 0x9(9) is Reversed block
Block 0xA(10) is Reversed block
Block 0xB(11) is Reversed block
Block 0xC(12) is Reversed block
Block 0x3A8(936) is BAD block !!!
Block 0x3A9(937) is BAD block !!!
Block 0x3AA(938) is BAD block !!!
Block 0x3AB(939) is BAD block !!!
Block 0x3AC(940) is BAD block !!!
Block 0x3AD(941) is BAD block !!!
Block 0x3AE(942) is BAD block !!!
Block 0x3AF(943) is BAD block !!!
Block 0x3B0(944) is BAD block !!!
Block 0x3B1(945) is BAD block !!!
Block 0x3B2(946) is BAD block !!!
Block 0x3B3(947) is BAD block !!!
Block 0x3B4(948) is BAD block !!!
Block 0x3B5(949) is BAD block !!!
Block 0x3B6(950) is BAD block !!!
Block 0x3B7(951) is BAD block !!!
Block 0x3B8(952) is BAD block !!!
Block 0x3B9(953) is BAD block !!!
Block 0x3BA(954) is BAD block !!!
Block 0x3BB(955) is BAD block !!!
Block 0x3BC(956) is BAD block !!!
Block 0x3BD(957) is BAD block !!!
Block 0x3BE(958) is BAD block !!!
Block 0x3BF(959) is BAD block !!!
Block 0x3C0(960) is BAD block !!!
Block 0x3C1(961) is BAD block !!!
Block 0x3C2(962) is BAD block !!!
Block 0x3C3(963) is BAD block !!!
Block 0x3C4(964) is BAD block !!!
Block 0x3C5(965) is BAD block !!!
Block 0x3C6(966) is BAD block !!!
Block 0x3C7(967) is BAD block !!!
Block 0x3C8(968) is BAD block !!!
Block 0x3C9(969) is BAD block !!!
Block 0x3CA(970) is BAD block !!!
Block 0x3CB(971) is BAD block !!!
Block 0x3CC(972) is BAD block !!!
Block 0x3CD(973) is BAD block !!!
Block 0x3CE(974) is BAD block !!!
Block 0x3CF(975) is BAD block !!!
Block 0x3D0(976) is BAD block !!!
Block 0x3D1(977) is BAD block !!!
Block 0x3D2(978) is BAD block !!!
Block 0x3D3(979) is BAD block !!!
Block 0x3D4(980) is BAD block !!!
Block 0x3D5(981) is BAD block !!!
Block 0x3D6(982) is BAD block !!!
Block 0x3D7(983) is BAD block !!!
Block 0x3D8(984) is BAD block !!!
Block 0x3D9(985) is BAD block !!!
Block 0x3DA(986) is BAD block !!!
Block 0x3DB(987) is BAD block !!!
Block 0x3DC(988) is BAD block !!!
Block 0x3DD(989) is BAD block !!!
Block 0x3DE(990) is BAD block !!!
Block 0x3DF(991) is BAD block !!!
Block 0x3E0(992) is BAD block !!!
Block 0x3E1(993) is BAD block !!!
Block 0x3E2(994) is BAD block !!!
Block 0x3E3(995) is BAD block !!!
Block 0x3E4(996) is BAD block !!!
Block 0x3E5(997) is BAD block !!!
Block 0x3E6(998) is BAD block !!!
Block 0x3E7(999) is BAD block !!!
Block 0x3E8(1000) is BAD block !!!
Block 0x3E9(1001) is BAD block !!!
Block 0x3EA(1002) is BAD block !!!
Block 0x3EB(1003) is BAD block !!!
Block 0x3EC(1004) is BAD block !!!
Block 0x3ED(1005) is BAD block !!!
Block 0x3EE(1006) is BAD block !!!
Block 0x3EF(1007) is BAD block !!!
Block 0x3F0(1008) is BAD block !!!
Block 0x3F1(1009) is BAD block !!!
Block 0x3F2(1010) is BAD block !!!
Block 0x3F3(1011) is BAD block !!!
Block 0x3F4(1012) is BAD block !!!
Block 0x3F5(1013) is BAD block !!!
Block 0x3F6(1014) is BAD block !!!
Block 0x3F7(1015) is BAD block !!!
Block 0x3F8(1016) is BAD block !!!
Block 0x3F9(1017) is BAD block !!!
Block 0x3FA(1018) is BAD block !!!
Block 0x3FB(1019) is BAD block !!!
Block 0x3FC(1020) is BAD block !!!
Block 0x3FD(1021) is BAD block !!!
Block 0x3FE(1022) is BAD block !!!
Block 0x3FF(1023) is BAD block !!!
Partition[0], type=0x20, start=0x2, total=0x18FE
Partition[1], type=0x23, start=0x1900, total=0x1700
Partition[2], type=0x25, start=0x3000, total=0x19E00
Partition[3], type=0x4, start=0x1CE00, total=0x1DA00
CE Total Length(with sector info) = 0x3AA7000
CE CheckSum Length(without sector info) = 0x39C0000
Is there any way to fix this?
If it works in bootloader mode, you can attempt a reflash: you don't need an Activesync connection to flash the ROM. Just stick the phone in bootloader mode, switch off USB on your computers Activesync and run the installer. My advice would be to keep trying until it flashes successfully.
Which Rom would you try, I have the following currently,
HERMIMG_CDL-WWE_1.20.305.4_Ship.nbh
HERMIMG_Dopod_1.23.707.4_SHIP.nbh
hermimg_QtekNOR_1.18.255.3_Ship.nbh
Currently on the unit in Bootloader it shows
HERM200
IPL-1.01
HERM200
SPL-1.04
Thanks again for trying to help, I really appreciate it.
You can flash whichever you want, complete list of roms is on the wiki:
http://wiki.xda-developers.com/index.php?pagename=Hermes_Upgrades
Let us know if a rom upgrade fixes the bad blocks. I've seen it on 3 or 4 devices already, so I think it is quite common although number of bad blocks seems to vary depending on the device.
So far no Luck, but I will continue, as I am using HDD USB Monitor, and trying everything up my sleeves,
BTW this is what is on my screen if I just try to start the unit regularly.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Very weird... haven't seen anything like that before :shock: :?
Can you do a rom upgrade sucessfully? if not, which error do u get from the RomUpgradeUt and what do you see in HHD USB Monitor?
No Doubt, this one is gonna be a little tricky,
I can not get it to upgrade, it gives me the error 222, or error 260 every time.
HDD Monitor, well have a look at the log from it.
Can you attach the log in text format? (export option in menu, then save as text without utf8).
Thanks.
OK here it is
mmm... shows almost nothing... is it a "full view" decode (second tab)?
Bootloader is still "safe" i gues... right? cos i can't see any bootloader output on the attached log.
All right this is the full one
mmm.... you don't seem to get any output from the device: :!:
- "task 32" command should return "Level = FF"
- "info 2" should return something like "HTCSQTEK_001.=.HTCE"
- "info 3" should return a big block of data encapsulated in HTCS / HTCE strings and starting with "H.E.R.M.2.0.0".
What happens if you put the device in bootloader mode and type those commands yourself using mtty?
Have you tryied running "set 14 0" and "task 8" and let de device boot?
Does this happened after a rom upgrade or where you doing something weird to the decvice? or it just happened without doing anything after normal phone usage?
A silly question, I know, but have you tried flashing the rom without the monitor, or even on a different PC?
Try flashing directly from microSD as described here and let us know if it fixes your problem:
http://forum.xda-developers.com/viewtopic.php?t=62596
Hey Pof, or anyone, can you creat just a new bootloader nbh for me, as I am so close right now.
Related
Hello,
My HTC blocked on the white screen where htc is written.
I do a soft or a hard reset it doen't go after the logo screen...
info 8 :
Block 0x0(0) is Reversed block
Block 0x1(1) is Reversed block
Block 0x2(2) is Reversed block
Block 0x3(3) is Reversed block
Block 0x4(4) is Reversed block
Block 0x5(5) is Reversed block
Block 0x6(6) is Reversed block
Block 0x7(7) is Reversed block
Block 0x8(8) is Reversed block
Block 0x9(9) is Reversed block
Block 0xA(10) is Reversed block
Block 0xB(11) is Reversed block
Block 0xC(12) is Reversed block
Block 0x1E7(487) is BAD block !!!
Block 0x1EA(490) is BAD block !!!
Block 0x1F3(499) is BAD block !!!
Block 0x207(519) is BAD block !!!
Block 0x209(521) is BAD block !!!
Block 0x21C(540) is BAD block !!!
Block 0x22A(554) is BAD block !!!
Block 0x22C(556) is BAD block !!!
Block 0x381(897) is BAD block !!!
Block 0x387(903) is BAD block !!!
Block 0x389(905) is BAD block !!!
Block 0x390(912) is BAD block !!!
Block 0x391(913) is BAD block !!!
Partition[0], type=0x20, start=0x2, total=0x18FE
Partition[1], type=0x23, start=0x1900, total=0x1700
Partition[2], type=0x25, start=0x3000, total=0x19800
Partition[3], type=0x4, start=0x1C800, total=0x1E000
CE Total Length(with sector info) = 0x39E4000
CE CheckSum Length(without sector info) = 0x3900000
What are those BAD block ???
USB>checkimage
IPL CRC checksum = 0xB11BA471
SPL CRC checksum = 0x3BF03635
CE CRC checksum = 0xC0E1751A
ExtROM CRC checksum = 0x4F9844B0
Radio Image CRC checksum = 0x724875C8
USB>info 7
HTC Integrated Re-Flash Utility, Common Base Version : 1.50a
Device Name: H, Bootloader Version : 1.04
Built at: May 26 2006 20:17:35
Copyright (c) 1998-2006 High Tech Computer Corporation
CPU ID=0x41129200
Main CPLD version=0x5
Upper CPLD version=0x4
Main Board version=0x5
Somebody can help me ???
Have you tried flashing HERMIMG.nbh from SD Card?
Instructions here, let me know if you need more help:
http://wiki.xda-developers.com/index.php?pagename=Hermes_SDCardFlashing
Hi pof,
In bootloader I don't see this menu you mentionned on the link but only the three colors (red, green and blue)...
What am I doing wrong ?
Regards,
Giuseppe
Try formating the miniSD card in FAT32, if it doesn't work try in FAT16.
It works for the FAT32.
It say upgrade completed but when I reset it still stay blocked on the white htc screen...
Any other advices ?
Regards
Bootloader command "task 28" formats NAND flash (Storage). I don't know if the bad blocks you have are in NAND or not, but you may give it a try... output should be something like this:
Code:
USB> task 28
Storage format start
Write Nand Success
dwBlockToWrite = 13
Storage start block: 462
Storage Total block: 474
Total Bad Block in CE: 0
NeedToEraseBlockStart: 475
Storage format success
Hi had the exact same problem about an hour ago. All I did was a hard reset and my phone came back to life, luckily every night my phone is synced with my pc so I had all my contacts and calender etc for messages.
I am sorry to open a new thread. I need help for my softbank x01ht. I have sim and cid unlock my phone with simunlock3.0 by pof. but I randomly meet a whitescreen. so I go the local shop in japan for repair. They said i had change my phone ROM，so lost warrant. I restore the original rom with the shipped rom file by softbank. BUT SITUATION is MORE BAD now. all the front key is out of work. I check my phone by mtty , use command as: task 32 , info 8 , task 2a... the message show that, there 4 bad blocks. and those command fix 3 of them. still , bad block 322 (0x142) can not be fixed? My question is how to fixed it ? btw. now still whitescreen, out of front function key.
zaipingx said:
I am sorry to open a new thread. I need help for my softbank x01ht. I have sim and cid unlock my phone with simunlock3.0 by pof. but I randomly meet a whitescreen. so I go the local shop in japan for repair. They said i had change my phone ROM，so lost warrant. I restore the original rom with the shipped rom file by softbank. BUT SITUATION is MORE BAD now. all the front key is out of work. I check my phone by mtty , use command as: task 32 , info 8 , task 2a... the message show that, there 4 bad blocks. and those command fix 3 of them. still , bad block 322 (0x142) can not be fixed? My question is how to fixed it ? btw. now still whitescreen, out of front function key.
Click to expand...
Click to collapse
Read this HardSPL sticky thread that has "Fix bad Blocks" in its title.
todd_jg said:
Read this HardSPL sticky thread that has "Fix bad Blocks" in its title.
Click to expand...
Click to collapse
yes , you are right. I has noticed this poste . but , when download it and install , I fail to do upgrade the SPL. I guess , due to position of bad block, it is in first (the bootload )partition. I am look forward for more help. Thank you for help and idea.
my softbank x01ht information is show as follow:
USB>task 32
Level = 0
USB>info 8
Block 0x0(0) is Reversed block
Block 0x1(1) is Reversed block
Block 0x2(2) is Reversed block
Block 0x3(3) is Reversed block
Block 0x4(4) is Reversed block
Block 0x5(5) is Reversed block
Block 0x6(6) is Reversed block
Block 0x7(7) is Reversed block
Block 0x8(8) is Reversed block
Block 0x9(9) is Reversed block
Block 0xA(10) is Reversed block
Block 0xB(11) is Reversed block
Block 0xC(12) is Reversed block
Block 0x142(322) is BAD block !!!
Partition[0], type=0x20, start=0x2, total=0x18FE
Partition[1], type=0x23, start=0x1900, total=0x1700
Partition[2], type=0x25, start=0x3000, total=0x1BB00
Partition[3], type=0x4, start=0x1EB00, total=0x1BD00
CE Total Length(with sector info) = 0x3E55800
CE CheckSum Length(without sector info) = 0x3D60000
USB>task 2a
Check block : 322 - Bad
You simply have a bad block. That's it.
You can't fix something that's actually broken.
so , the question is gonna to , how to avoid to store data in this block? how to marked this bad block? and reinstall the first partition(bootloader?)? any more idea?
thank you!
zaipingx said:
so , the question is gonna to , how to avoid to store data in this block? how to marked this bad block? and reinstall the first partition(bootloader?)? any more idea?
thank you!
Click to expand...
Click to collapse
i am interrested in any answer for this question.
i am in the same situation with my Trinity except i have 2 bad blocks !
please help
I could use some help. I am well and truly hung.
I've tried reading several threads.
The device was upgraded to the "Black Shadow Version 4" ROM
It now hangs at the Windows Splash Screen
CID unlock has not previously been done.
Soft, Hard Reset and Taking out the battery have been tried and failed.
Hermes SPL1.11
CID
cmd > info 2
HTCSROGER001ùìHTCE
I am assuming I should be able to
I extract the .nbh image file from the HTC WM6 official release (
HTC_TyTN_WWE_3.54.255.3_6275_1.48.00.10_108.exe
-> "RUU Signed.nbh"
And that I should be able to install this with
RUUWrapper.exe
I am able to get into the bootloader Power-Okay-Reset
When I select the 1.11 Load Option it results in:
Error 294: INVALID VENDER ID
or "Force using SSPL" results in a
Error 260: Update Error
How do I bring this brick back?
Thanks,
Robert
No Bad Blocks...
Cmd>info 8
Block 0x0(0) is Reversed block
Block 0x1(1) is Reversed block
Block 0x2(2) is Reversed block
Block 0x3(3) is Reversed block
Block 0x4(4) is Reversed block
Block 0x5(5) is Reversed block
Block 0x6(6) is Reversed block
Block 0x7(7) is Reversed block
Block 0x8(8) is Reversed block
Block 0x9(9) is Reversed block
Block 0xA(10) is Reversed block
Block 0xB(11) is Reversed block
Block 0xC(12) is Reversed block
Partition[0], type=0x20, start=0x2, total=0x18FE
Partition[1], type=0x23, start=0x1900, total=0x1800
Partition[2], type=0x25, start=0x3100, total=0x18B00
Partition[3], type=0x4, start=0x1BC00, total=0x1EC00
CE Total Length(with sector info) = 0x385E000
CE CheckSum Length(without sector info) = 0x3780000
Cmd>
You may be making this far more harder for yourself than you need to. If you're able to get into the bootloader, then just flash your standard carrier ROM from there while attached via USB.
I just found my standard carrier ROM here:
http://wiki.xda-developers.com/index.php?pagename=Hermes_DumpedRoms
Am downloading now.
That doesn't work it is a collection of 3 .raw files.
The advice "apply a standard rom" is harder than it might appear.
Where do I find a Rogers HTC Hermes ROM? erk!
I am now at trying to reconstruct an NBH using the following: (tell me I am being silly and there is an easier way!)
http://wiki.xda-developers.com/index.php?pagename=Trinity_HowtoReconstruct
Hi All,
I got a weird problem on my 8525 recently.
Two days ago, in a sudden, my 8525's radio stops working, and the system turned very slow on every actions.
In fact, there are some mal-functions recently, like my email account disappeared itself, and phone signals is not goot, etc. But i did not pay attention to that, coz too busy. But I think that's some signal for some problem now.
After I got home, i tried to re-flash a new radio rom, but it failed, error 262.
Also, I can not flash hardspl v9, but v7 is successul.
I can flash any OS ROM, they are all working fine.
Now when starting, there is no radio at all.
Checking of nand flash returns some bad blocks, i tried to use task 2a and task 28 to repair. But no matter how i tried, there are still on bad block can not be removed. output as below
Cmd>info 8
Block 0x0(0) is Reversed block
Block 0x1(1) is Reversed block
Block 0x2(2) is Reversed block
Block 0x3(3) is Reversed block
Block 0x4(4) is Reversed block
Block 0x5(5) is Reversed block
Block 0x6(6) is Reversed block
Block 0x7(7) is Reversed block
Block 0x8(8) is Reversed block
Block 0x9(9) is Reversed block
Block 0xA(10) is Reversed block
Block 0xB(11) is Reversed block
Block 0xC(12) is Reversed block
Block 0x33F(831) is BAD block !!!
Partition[0], type=0x20, start=0x2, total=0x18FE
Partition[1], type=0x23, start=0x1900, total=0x1800
Partition[2], type=0x25, start=0x3100, total=0x21700
Partition[3], type=0x4, start=0x24800, total=0x16000
CE Total Length(with sector info) = 0x4A24000
CE CheckSum Length(without sector info) = 0x4900000
Cmd>task 2a
Check block : 831 - Bad
Task 28 always return a success.
So anyone here faced similiar problem with me？ Any suggestions? Thanks a lot in advance.
dustmud said:
Also, I can not flash hardspl v9, but v7 is successul.
Click to expand...
Click to collapse
use V7 then
yes, i can use v7 now.
but i am wondering the reason that i can not flash v9 is same as that i can not flash my radio..
my radio rom can not be flashed, no matter with which version.
hey,
ich got the same problem too. i don't know any answer...my hermes radio didn't work since 1 month...i tried so much but i can't flash the radio. but i have no bad blocks on info 8.
Hi,
i have a similar problem.
Tried to use task 2a but without success.
I tried to upgrade the radio but it doesn't work.
Os is updatable instead. I flashed schaps rom without problem.
Wiki only says to flash the radio rom..
Any help?
Try flashing one of the official roms as they tend to include the radio in them. See if that fixes it.
markafreeman said:
Try flashing one of the official roms as they tend to include the radio in them. See if that fixes it.
Click to expand...
Click to collapse
I don't remember if i already did it..
I'll try again and let you know.
Thanks by now.
acr80 said:
I don't remember if i already did it..
I'll try again and let you know.
Thanks by now.
Click to expand...
Click to collapse
Ok.. did it.
Nothing to do, it stucks on 12%.
Cmd>info 8
Block 0x0(0) is Reversed block
Block 0x1(1) is Reversed block
Block 0x2(2) is Reversed block
Block 0x3(3) is Reversed block
Block 0x4(4) is Reversed block
Block 0x5(5) is Reversed block
Block 0x6(6) is Reversed block
Block 0x7(7) is Reversed block
Block 0x8(8) is Reversed block
Block 0x9(9) is Reversed block
Block 0xA(10) is Reversed block
Block 0xB(11) is Reversed block
Block 0xC(12) is Reversed block
Block 0x1F1(497) is BAD block !!!
Block 0x277(631) is BAD block !!!
Block 0x370(880) is BAD block !!!
Partition[0], type=0x20, start=0x2, total=0x18FE
Partition[1], type=0x23, start=0x1900, total=0x1900
Partition[2], type=0x25, start=0x3200, total=0x1A900
Partition[3], type=0x4, start=0x1DB00, total=0x1CD00
CE Total Length(with sector info) = 0x3C4D800
CE CheckSum Length(without sector info) = 0x3B60000
and..
Cmd>task 2a
Check block : 497 - Bad
Check block : 631 - Bad
Check block : 880 - Bad
Any suggestion?
OK, I had done some researches on how to repair bad blocks and how to reset call timer on my Herm. There are many threats asking the same questions but the answers seem not very clear. I tried to read all related threads and tried many times for two days to solve these issues (perhaps I am not clever enought - that's why it took two days), I finally had done it. This is not a new thing but I just would like to make it easier for those who are not sure how to solve these problems yet. Just ignor it if this is not helpful or mod can feel free to delete ths threat.
Please note that this is not the only way to solve it, you may want to share if you have better ideas.
1. How to check and repair bad block
a). Please make sure that you are SuperCID and you understand the importance of hard spl as this maybe a dangerious operation for you.
b). Downloan Mtty.exe file in the attachment below and save it to your computer.
c). Open connection setting of your activesync or WMDC on your PC and disable "Allow USB connection".
d). Put your divice into Bootloader mode and connect to your PC via USB
e). Run Mtty.exe from your PC
f). Selec "USB" in port box and then click OK
g). Press Enter once or twice to let the screen dispay "USB>" or "CMD>"
h). Type "info 8" to check if your device has bad blocks. And if there are any,
i). Type "task 2a" to fix the bad blocks.
That's what I had done and solved...
2. How to reset call timer (if you want to know reason why you want to do this, please do additional research)
a). Please make sure that you are SuperCID and you understand the importance of hard spl as this maybe a dangerious operation for you.
b). Make sure that you have SPL 1.10 Olipro (this one works for me, higher version seems not work)
c). Downloan Mtty.exe file in the attachment below and save it to your computer.
d). Open connection setting of your activesync or WMDC on your PC and disable "Allow USB connection".
e). Put your divice into Bootloader mode and connect to your PC via USB
f). Run Mtty.exe from your PC
g). Selec "USB" in port box and then click OK
h). Press Enter once or twice to let the screen dispay "USB>" or "CMD>"
i). Type "rtask b" and Enter then it should show result "0"
j). then type "ate1" and Enter then it should show result "0"
k).then type "atv1" and Enter then it should show result "OK"
l). then type "[email protected]=270f,270f" and Enter then it should show result "OK"
Restart you PPC.... you call timer should be 00.00.00
Enjoy!!!
Sorry if you can not understand my English very well
Edit: please feel free to make correction if there's something wrong or i am missing, but I followed this and got sucessful.
DO THIS AT YOUR OWN RISK!!!
Thanks friend. This is what I am looking for.
jonhmichal said:
Thanks friend. This is what I am looking for.
Click to expand...
Click to collapse
That's why we are here.
@vichet007
Could you post a link or upload the HardSPL 1.10 Olipro.
I have used the search button but haven´t found anything.
eightball said:
@vichet007
Could you post a link or upload the HardSPL 1.10 Olipro.
I have used the search button but haven´t found anything.
Click to expand...
Click to collapse
file now attched in the first post. enjoy..
Thanks for the update
Hi lyhouth, I have problem with "task 2a" not fixing bad blocks. here is info:
Cmd>info 8
Block 0x0(0) is Reversed block
Block 0x1(1) is Reversed block
Block 0x2(2) is Reversed block
Block 0x3(3) is Reversed block
Block 0x4(4) is Reversed block
Block 0x5(5) is Reversed block
Block 0x6(6) is Reversed block
Block 0x7(7) is Reversed block
Block 0x8(8) is Reversed block
Block 0x9(9) is Reversed block
Block 0xA(10) is Reversed block
Block 0xB(11) is Reversed block
Block 0xC(12) is Reversed block
Block 0xBE(190) is BAD block !!!
Block 0xDC(220) is BAD block !!!
Partition[0], type=0x20, start=0x2, total=0x18FE
Partition[1], type=0x23, start=0x1900, total=0x1900
Partition[2], type=0x25, start=0x3200, total=0x1D700
Partition[3], type=0x4, start=0x20900, total=0x1E700
CE Total Length(with sector info) = 0x4224800
CE CheckSum Length(without sector info) = 0x4120000
Cmd>task 2a
Check block : 190 - Bad
Check block : 220 - Bad
What else would you suggest to fix bad blocks???
after reseting the call durtion it's 00:00:00 on both incoming and outgoing calls ,
but it doesn't count at all the duration from now on[stays 00:00:00 even though i use the phone), any suggestion ?
thanks
jimmy
ultramag69 said:
Hi vichet007, I have problem with "task 2a" not fixing bad blocks. here is info:
Cmd>info 8
Block 0x0(0) is Reversed block
Block 0x1(1) is Reversed block
Block 0x2(2) is Reversed block
Block 0x3(3) is Reversed block
Block 0x4(4) is Reversed block
Block 0x5(5) is Reversed block
Block 0x6(6) is Reversed block
Block 0x7(7) is Reversed block
Block 0x8(8) is Reversed block
Block 0x9(9) is Reversed block
Block 0xA(10) is Reversed block
Block 0xB(11) is Reversed block
Block 0xC(12) is Reversed block
Block 0xBE(190) is BAD block !!!
Block 0xDC(220) is BAD block !!!
Partition[0], type=0x20, start=0x2, total=0x18FE
Partition[1], type=0x23, start=0x1900, total=0x1900
Partition[2], type=0x25, start=0x3200, total=0x1D700
Partition[3], type=0x4, start=0x20900, total=0x1E700
CE Total Length(with sector info) = 0x4224800
CE CheckSum Length(without sector info) = 0x4120000
Cmd>task 2a
Check block : 190 - Bad
Check block : 220 - Bad
What else would you suggest to fix bad blocks???
Click to expand...
Click to collapse
Well, I am not an expert on this, but as long as I know sometimes these are factory marked bad blocks (someone had mentioned this somewhere) so that it is normal. Please let me know if there is any effection of this bad block. If not, it is normal. For my problem, it randomly did hard reset or sometime soft reset stucks at bootscreen.
jimmymotek said:
after reseting the call durtion it's 00:00:00 on both incoming and outgoing calls ,
but it doesn't count at all the duration from now on[stays 00:00:00 even though i use the phone), any suggestion ?
thanks
jimmy
Click to expand...
Click to collapse
Ah, I did not have this problem. My phone started counting after reset. Did you follow the correct procedure? Sorry, I do not know how to resolve this too. Maybe others are able to share..
I noticed about the history of ROMs you used in your signature that you used to go back to official ROM and then go back to Schap 4.31 and now your current ROM is Faria. Can you share why did you back to Schaps 4.31 and then Faria?
jonhmichal said:
I noticed about the history of ROMs you used in your signature that you used to go back to official ROM and then go back to Schap 4.31 and now your current ROM is Faria. Can you share why did you back to Schaps 4.31 and then Faria?
Click to expand...
Click to collapse
The reason that I went back to official ROM is to solve HARD RESET and STUCK-AT-BOOT SCREEN problem and the reason that I went back to Schaps ROM because I like his first boot screen picture (small blackHTC logo). finally I'm using Faria ROM as this is the most stable ROM.
USB>task 2a
USB>rtask b
0
0
atv1
OK
[email protected]=270f,270f
ERROR
????
I have tried this and got message, what to do next???
Cmd>rtask b
Enter Radio Image
strazicic said:
I have tried this and got message, what to do next???
Cmd>rtask b
Enter Radio Image
Click to expand...
Click to collapse
I think you may have used this with wrong device. This is for Hermes not Wizard.
batuocbongdem said:
USB>task 2a
USB>rtask b
0
0
atv1
OK
[email protected]=270f,270f
ERROR
????
Click to expand...
Click to collapse
Can you let me know what device are you using? I had tested this with Hermes only and it may not work for other devices.
hermes 100 (dopod 838 pro)
radio 1.54.30.10
IPL 1.04
SPL 1.10.Oli
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
batuocbongdem said:
hermes 100 (dopod 838 pro)
radio 1.54.30.10
IPL 1.04
SPL 1.10.Oli
Click to expand...
Click to collapse
I see your problem now. You missed one commend "ate1" before starting "atv1". Follow the below command exactly or the instruction in the first post, you may get rid of it:
USB>rtask b
0
0
ate1
0
atv1
OK
[email protected]=270f,270f
OK
mtty under Linux?
lyhuoth said:
This is not a new thing but I just would like to make it easier for those who are not sure how to solve these problems yet.
Click to expand...
Click to collapse
Thanks a lot for that lyhuoth, it's very handy to have these things collected together.
I'm an idiot said:
This requires mtty.exe, which is Windows-only. Is there something like mtty for linux?
Searching the forum turned up nothing obvious, but I did stumble across pof's HTCflasher which has a "enter serial prompt" option.
On the other hand, everything I read suggests that mtty is just a serial-port command line interface, which suggests to me that using minicom might be sufficient...
Is HTCflasher or minicom a suitable mtty substitute under Linux?
Click to expand...
Click to collapse
So, it says quite clearly on the pof's HTCflasher thread that it "replaces mtty"... Also, what I hadn't seen earlier, was the wiki entry for the Bootloader which says to use "mtty under Windows or minicom/cu under Linux"...
Anyway, I've managed to run a bad-block check using HTCflasher...
Code:
[email protected]:HTCFlasher$ ./HTCflasher -m hermes1 -v -s /dev/ttyUSB0 -i
=== XDA-Developers HTCflasher v2.0 by pof
=== Open source RUU for HTC devices
[] verbose mode enabled
[] Getting device info... please wait
Device=HERM100
SecLevel=0
CID=SuperCID
SPL=2.10.Oli�
CommonBase=1.51d
Done!
[email protected]:HTCFlasher$ ./HTCflasher -m hermes1 -v -s /dev/ttyUSB0 -p
=== XDA-Developers HTCflasher v2.0 by pof
=== Open source RUU for HTC devices
[] verbose mode enabled
[] serial prompt shell. Use ^C to exit.
Upper CPLD version=0x4
Main Board version=0x6
Cmd>info 8
info 8
Block 0x0(0) is Reversed block
Block 0x1(1) is Reversed block
Block 0x2(2) is Reversed block
Block 0x3(3) is Reversed block
Block 0x4(4) is Reversed block
Block 0x5(5) is Reversed block
Block 0x6(6) is Reversed block
Block 0x7(7) is Reversed block
Block 0x8(8) is Reversed block
Block 0x9(9) is Reversed block
Block 0xA(10) is Reversed block
Block 0xB(11) is Reversed block
Block 0xC(12) is Reversed block
Partition[0], type=0x20, start=0x2, total=0x18FE
Partition[1], type=0x23, start=0x1900, total=0x1900
Partition[2], type=0x25, start=0x3200, total=0x14F00
Partition[3], type=0x4, start=0x18100, total=0x22700
CE Total Length(with sector info) = 0x30E0800
CE CheckSum Length(without sector info) = 0x3020000
Cmd>
Hope this helps anyone who is trying to run this under Linux.
Thanks for putting this together.
it always show error,someone help plese
USB>
USB>rtask b
0
0
ate1
0
atv1
OK
[email protected]=270f,270f
ERROR
[email protected]=270f,270f
ERROR