Related
i tried flashing my neos rom to WM6.1_Touch_Evolution by maxniper
according to the procedures.. but i cudnt e1 after tryin 2 load the rom it was frequently goin into bootloader mode..
now somehow i managed to load wm5 again back..
can any1 please help me out on how to load the above mentioned rom..
and can i install the diamond rom in my neo??
you have to HARDSPL your device first.
and flash the ROM again.
anurag440044 said:
and can i install the diamond rom in my neo??
Click to expand...
Click to collapse
You can only install ROMs for the Prophet on your device.
anurag440044 said:
i tried flashing my neos rom to WM6.1_Touch_Evolution by maxniper
according to the procedures.. but i cudnt e1 after tryin 2 load the rom it was frequently goin into bootloader mode..
now somehow i managed to load wm5 again back..
can any1 please help me out on how to load the above mentioned rom..
Click to expand...
Click to collapse
Hello
Firts you neew install this rom
http://rapidshare.com/files/54265407/Prophet_PV_Temp.zip
next the ROM you like
check this link
http://forum.xda-developers.com/showthread.php?t=377545&highlight=fantastic
sometimes you need hardslp
http://forum.xda-developers.com/showthread.php?t=353547
I hope you fix tour phone
anurag440044 said:
i tried flashing my neos rom to WM6.1_Touch_Evolution by maxniper
according to the procedures.. but i cudnt e1 after tryin 2 load the rom it was frequently goin into bootloader mode..
now somehow i managed to load wm5 again back..
can any1 please help me out on how to load the above mentioned rom..
Click to expand...
Click to collapse
check my post........http://forum.xda-developers.com/showthread.php?t=353547
Calogero64 said:
Hello
Firts you neew install this rom
http://rapidshare.com/files/54265407/Prophet_PV_Temp.zip
next the ROM you like
check this link
http://forum.xda-developers.com/showthread.php?t=377545&highlight=fantastic
sometimes you need hardslp
http://forum.xda-developers.com/showthread.php?t=353547
I hope you fix tour phone
Click to expand...
Click to collapse
what is hardspl and why is it needed.?i mean i shud install PV_Temp.zip 1st and then hardspl or hardspl should com after the total installation
anurag440044 said:
what is hardspl and why is it needed.?i mean i shud install PV_Temp.zip 1st and then hardspl or hardspl should com after the total installation
Click to expand...
Click to collapse
What you need to do is install PV_TEMP or any other WM5 NVID ROM. From there, you must HardSPL your device. This patches the bootloader and allows the device to load WM6 and WM6.1 ROMs. without it, you get stuck in bootloader.
Once you have HardSPL set up, you can then flash the new WM6.1 ROM.
Thnx so much guys
i finally installed da rom in my neo n m really happy
just 1 last problem..
i cant get the ppt, excel, word etc including the touch cube to work in my cell..
its saying touch cube is not installed
what should i do?
Hello Dear friends,
I have really big problem with this ROM version:3.14.405.2(04666) WWE. It uses 89% of the processor and I cant use any appz that I want because of this. I have problems with the Internet Browser. This problem really makes me unhappy. Is there a way that we can "fix" this. If there isn't I'll have to change from WM to Android.
komanchi_bg said:
Hello Dear friends,
I have really big problem with this ROM version:3.14.405.2(04666) WWE. It uses 89% of the processor and I cant use any appz that I want because of this. I have problems with the Internet Browser. This problem really makes me unhappy. Is there a way that we can "fix" this. If there isn't I'll have to change from WM to Android.
Click to expand...
Click to collapse
Sir you need to remove your HSPL.
Reinstall previous ROM version, remove your HSPL, and install new stock ROM 3.14
kurt-willems said:
Sir you need to remove your HSPL.
Reinstall previous ROM version, remove your HSPL, and install new stock ROM 3.14
Click to expand...
Click to collapse
How can I remove this HSPL? I tried to install other ROM but it didn't work. It couldn't boot the devise after the installation was completed so I installed again the same ROM to run again the phone.
komanchi_bg said:
How can I remove this HSPL? I tried to install other ROM but it didn't work. It couldn't boot the devise after the installation was completed so I installed again the same ROM to run again the phone.
Click to expand...
Click to collapse
same way as installation; use SSPL2_RUN.exe and select spl 1.66
kurt-willems said:
same way as installation; use SSPL2_RUN.exe and select spl 1.66
Click to expand...
Click to collapse
OK I have installed the HSPL2_RUN.exe (spl.1.66). Now which ROM to install? The same that I installed before (ROM version:3.14.405.2(04666) WWE) or other?
With this change it felt to 79% but i think it is still too match.
komanchi_bg said:
OK I have installed the HSPL2_RUN.exe (spl.1.66). Now which ROM to install? The same that I installed before (ROM version:3.14.405.2(04666) WWE) or other?
With this change it felt to 79% but i think it is still too match.
Click to expand...
Click to collapse
Yes sir you can install now stock ROM 3.14! (PS, after first installation do a hard reset)
kurt-willems said:
Yes sir you can install now stock ROM 3.14! (PS, after first installation do a hard reset)
Click to expand...
Click to collapse
It didn't work. Something is wrong. There is no change of now and before????
And I can't install the ROM 3.14 again.
komanchi_bg said:
It didn't work. Something is wrong. There is no change of now and before????
And I can't install the ROM 3.14 again.
Click to expand...
Click to collapse
What's the problem that you have/see?
How did you set previous stock Rom? Is the stock Rom for your device?
Witch is the information on Boot-louder?
kurt-willems said:
What's the problem that you have/see?
How did you set previous stock Rom? Is the stock Rom for your device?
Witch is the information on Boot-louder?
Click to expand...
Click to collapse
After I did hard reset like you said, I started the RUU_Leo_S_HTC_WWE_3.14.405.2_Radio_15.42.50.11U_2.15.50.14_LEO_S_Ship file ... I can't install it. Maybe it's because I have the 3.14 and the ROM 3.14 and the installation is canceling because of this. I tried to do the whole operation again with the TASK 29 but again it didn't start the installation ???
Maybe I have to start all over again?
Wait, let resumate before doing something.
First you mention to have HSPL; then you removed it.
Now you mention to try to install Stock rom 3.14 but you mention that you have stock rom 3.14 on your device?
Can follow it
To be clear.
On witch SPL/HSPL version are you now?
On witch ROM version are you now?
What have you done from yesterday till now? (I mean on your device he )
I will set the hole steps you needed to have don.
- reinstall your previous stock ROM (1.66 ore 1.47)
- remove your HSPL by using HSPL2_RUN.exe
- Install stock ROM 3.14
That's it.
kurt-willems said:
Wait, let resumate before doing something.
First you mention to have HSPL; then you removed it.
Now you mention to try to install Stock rom 3.14 but you mention that you have stock rom 3.14 on your device?
Can follow it
To be clear.
On witch SPL/HSPL version are you now?
On witch ROM version are you now?
What have you done from yesterday till now? (I mean on your device he )
I will set the hole steps you needed to have don.
- reinstall your previous stock ROM (1.66 ore 1.47)
- remove your HSPL by using HSPL_RUN.exe
- Install stock ROM 3.14
That's it.
Click to expand...
Click to collapse
First step is done. I have the 1.66 spl. Now from where to download this HSPL_RUN.exe .... I have HSPL2_RUN.exe. is it the same
kurt-willems said:
Wait, let resumate before doing something.
First you mention to have HSPL; then you removed it.
Now you mention to try to install Stock rom 3.14 but you mention that you have stock rom 3.14 on your device?
Can follow it
To be clear.
On witch SPL/HSPL version are you now?
On witch ROM version are you now?
What have you done from yesterday till now? (I mean on your device he )
I will set the hole steps you needed to have don.
- reinstall your previous stock ROM (1.66 ore 1.47)
- remove your HSPL by using HSPL_RUN.exe
- Install stock ROM 3.14
That's it.
Click to expand...
Click to collapse
First step is done. I have the 1.66 spl. Now from where to download this HSPL_RUN.exe .... I have HSPL2_RUN.exe. Is it the same?
I found HSPL.exe from this site: http://www.mediafire.com/?ukjzmd2dn0w ... is it the same?
komanchi_bg said:
First step is done. I have the 1.66 spl. Now from where to download this HSPL_RUN.exe .... I have HSPL2_RUN.exe. Is it the same?
I found HSPL.exe from this site: http://www.mediafire.com/?ukjzmd2dn0w ... is it the same?
Click to expand...
Click to collapse
Sorry It was me who forgot to wright the 2.
You need HSPL2_RUN.exe
kurt-willems said:
Sorry It was me who forgot to wright the 2.
You need HSPL2_RUN.exe
Click to expand...
Click to collapse
OK how to remove your HSPL by using HSPL2_RUN.exe ...is it to install the spl-1.66.0000
From where to install this - Install stock ROM 3.14
komanchi_bg said:
OK how to remove your HSPL by using HSPL2_RUN.exe ...is it to install the spl-1.66.0000
Click to expand...
Click to collapse
Yeah, spl-1.66 ore 1.47 is ok (personally I use always the 1.66)
kurt-willems said:
Yeah, spl-1.66 ore 1.47 is ok (personally I use always the 1.66)
Click to expand...
Click to collapse
OK last step => From where to install this - Install stock ROM 3.14
komanchi_bg said:
OK last step => From where to install this - Install stock ROM 3.14
Click to expand...
Click to collapse
You have a WWE unbranded device?
or is it branded?
If it is unbranded; here you have a link:
http://www.multiupload.com/IB4BASVY1I
kurt-willems said:
You have a WWE unbranded device?
or is it branded?
If it is unbranded; here you have a link:
http://www.multiupload.com/IB4BASVY1I
Click to expand...
Click to collapse
What's the difference. I bought it from Operator.
komanchi_bg said:
What's the difference. I bought it from Operator.
Click to expand...
Click to collapse
Go to this webpage:
http://www.htc.com/uk/SupportDownload.aspx?p_id=297&cat=2&dl_id=1043
Enter your Serial Number from your device on it.
If you can download it it is a unbranded device.
kurt-willems said:
Go to this webpage:
http://www.htc.com/uk/SupportDownload.aspx?p_id=297&cat=2&dl_id=1043
Enter your Serial Number from your device on it.
If you can download it it is a unbranded device.
Click to expand...
Click to collapse
I can't ("Sorry, this software download is not suitable for your device.")...
And when i try to install it => verify that you want to update the ROM version: From: Image version:3.14.405.2 => To: mage version:3.14.405.2
Can i flash to any other cook rom if using SSPL although under SPL3.03 ?
or must need to use HSPL (need to downgrade the SPL first?) ???
If yes.....is that all cook rom is can upgrade via SSPL ?
If i need to send for repair, do i need to recover to original ROM ?
Sorry, i am very confused.....
thx alot
hkd said:
Can i flash to any other cook rom if using SSPL although under SPL3.03 ?
or must need to use HSPL (need to downgrade the SPL first?) ???
If yes.....is that all cook rom is can upgrade via SSPL ?
If i need to send for repair, do i need to recover to original ROM ?
Sorry, i am very confused.....
thx alot
Click to expand...
Click to collapse
- Yes you can use SSPL for installing a custom ROM.
Yes; for guaranty you need to tern back on stock ROM; and certainly having removed HSPL.
hi, i have a question. i would like to install the latest CLOCKWORK RECOVERY with the samsung CORBY I5500, using ROM MANAGER
when i use rom manager downloaded from the market, it does not detect my phone model.
how can i flash my recovery program ?
on the official site i can download the recovery but i don't know how to flash it ?
can someone help me ?
thank you
Non hai visto che ti ho risposto su AndroidWorld? Stamattina ti ho indicato tutti i passaggi!
Inviato dal mio GT-I5500 usando Tapatalk
ho un dubbio sull'installazione mi puoi aiutare ?
jpcapobianco said:
ho un dubbio sull'installazione mi puoi aiutare ?
Click to expand...
Click to collapse
Certo ma decidi dove però!
{ brvsn ~ CM7 on GT-I5500 ~ Tapatalk }
dont ever flash rom manager to i5500 as it is not comaptible with it if u flash wrong recovery it will hard brick ur device and it will become a paper weight and will be useless.
ddeswal3 said:
dont ever flash rom manager to i5500 as it is not comaptible with it if u flash wrong recovery it will hard brick ur device and it will become a paper weight and will be useless.
Click to expand...
Click to collapse
Then you did something wrong if that happens. Cuz' that has NEVER happened me anytime.
OnTopic: You have to flash CWM through your PC first then flash on Rom Manager
There is no official clockworkmod recovery for galaxy 5...
You have flash the device via unofficial cwm recovery.......
It will be available on the clockworkmod website.......
FrgTTen from galaxy 5
Don't select any device model that the rom manager app displays after processing ....
If you ever flash with any other recovery you will sure have your device bricked.......
U have to manually download the recovery files and then flash it via odin multi downloader 4.28
FrgTTen from galaxy 5
Go to link, downloaded and flash it via custom recovery.if no recovery install then extract the zip and you get recovery.img .you can flash it via fastboot.
47.18 MB file on MEGA
mega.nz
Shas45558 said:
Go to link, downloaded and flash it via custom recovery.if no recovery install then extract the zip and you get recovery.img .you can flash it via fastboot.
47.18 MB file on MEGA
mega.nz
Click to expand...
Click to collapse
Where did that come from? 2 days ago i hard bricked my phone cause there was no working recovery (ofc i fuxed my phone )
Flashed by fastboot in LANCELOTEEAGlobal_V12.0.1.0.RJCEUXM_5296a84759_11 and working perfectly.
The only thing I don't like is the nike logo. Is it possible to eliminate it in any way? xD Can you add the Spanish language in any way? Only features english and russian.
Thanks
javilonas said:
Flashed by fastboot in LANCELOTEEAGlobal_V12.0.1.0.RJCEUXM_5296a84759_11 and working perfectly.
The only thing I don't like is the nike logo. Is it possible to eliminate it in any way? xD Can you add the Spanish language in any way? Only features english and russian.
Thanks
Click to expand...
Click to collapse
I am not dev of this rom..and your mention's problem is not a big issues..
Shas45558 said:
I am not dev of this rom..and your mention's problem is not a big issues..
Click to expand...
Click to collapse
I have never claimed that you are the dev of the redmi9 European Global Official ROM nor have I commented on any issues.
I have commented that the only thing I do not like is the NIKE logo when starting the recovery. And that this one, is in English and Russian only.
I asked if there or do you know any possibility of putting the Spanish language.
Always referring to recovery.
The recovery works perfect on Xiaomi Redmi 9 with the latest official Global European version (EEA).
Regards
javilonas said:
I have never claimed that you are the dev of the redmi9 European Global Official ROM nor have I commented on any issues.
I have commented that the only thing I do not like is the NIKE logo when starting the recovery. And that this one, is in English and Russian only.
I asked if there or do you know any possibility of putting the Spanish language.
Always referring to recovery.
The recovery works perfect on Xiaomi Redmi 9 with the latest official Global European version (EEA).
Regards
Click to expand...
Click to collapse
No..they not add those language ..
javilonas said:
Atualizado por fastboot em LANCELOTEEAGlobal_V12.0.1.0.RJCEUXM_5296a84759_11 e funcionando perfeitamente.
A única coisa que não gosto é o logotipo da nike. É possível eliminá-lo de alguma forma? xD Você pode adicionar o idioma espanhol de alguma forma? Apresenta apenas inglês e russo.
Obrigado
Click to expand...
Click to collapse
Shas45558 said:
Acesse o link, baixe e atualize-o por meio de recuperação personalizada. Se não houver recuperação, instale o zip e obtenha recovery.img. Você pode atualizá-lo via fastboot.
[URL unfurl = "true"] https://mega.nz/file/cgJBjKLB#up02GhV5lg2jobOjmUSK4hebc-fIRbW254kCTk6ycJ8 [/ URL]
Click to expand...
Click to collapse
Does it work in global version?
Shas45558 said:
Go to link, downloaded and flash it via custom recovery.if no recovery install then extract the zip and you get recovery.img .you can flash it via fastboot.
47.18 MB file on MEGA
mega.nz
Click to expand...
Click to collapse
javilonas said:
Flashed by fastboot in LANCELOTEEAGlobal_V12.0.1.0.RJCEUXM_5296a84759_11 and working perfectly.
The only thing I don't like is the nike logo. Is it possible to eliminate it in any way? xD Can you add the Spanish language in any way? Only features english and russian.
Thanks
Click to expand...
Click to collapse
Can you teach step by step how to install via fast boot?
Dz7 said:
Does it work in global version?
Click to expand...
Click to collapse
In Global Europe (EEA) it works fine.
Dz7 said:
Can you teach step by step how to install via fast boot?
Click to expand...
Click to collapse
I DO NOT BE RESPONSIBLE FOR ANYTHING, USE AT YOUR OWN RESPONSIBILITY.
While in fast boot mode, execute the following steps inside the unzipped directory:
1º - PASO_1.bat
2º - PASO_2.bat
3º - PASO_3.bat
4º - OPTIONAL: REINICIAR.bat or REINICIAR_RECOVERY.bat
DOWNLOAD: https://mega.nz/file/GNpEBDJS#1v9RuareE5hcqxGJViCgqCuzFXX1JQRPUREGHVBTJQY
Connect device in fastboot mode, Open command prompt in platform tools folder and type the following commands.
fastboot flash recovery (pbrp/twrp whatever your image name is).img
fastboot --disable-verification flash vbmeta vbmeta.img
fastboot reboot recovery
You can find vbmeta.img in your stock rom
Dz7 said:
Can you teach step by step how to install via fast boot?
Click to expand...
Click to collapse
Dz7 said:
Does it work in global version?
Click to expand...
Click to collapse
Yes
I'm using miui 12.0.1 android 11. Twrp install fine but whenever I'm trying to flash or wipe at very end when update partition comes I get 'failed to mount system_root/data/vendor(permission denied)'. Anyone facing this error? Any solution?
Shas45558 said:
Connect device in fastboot mode, Open command prompt in platform tools folder and type the following commands.
fastboot flash recovery (pbrp/twrp whatever your image name is).img
fastboot --disable-verification flash vbmeta vbmeta.img
fastboot reboot recovery
You can find vbmeta.img in your stock rom
Click to expand...
Click to collapse
Is flashing vbmeta necessary?
If yes I'll go and search my stock ROM haha.
Will this work on the latest update? MIUI V12.0.1.0.RJCMIXM
Dz7 said:
Does it work in global version?
Click to expand...
Click to collapse
Yes
chuckens said:
Will this work on the latest update? MIUI V12.0.1.0.RJCMIXM
Click to expand...
Click to collapse
Yes it is for a11 miui 12
JLN97Lan said:
Is flashing vbmeta necessary?
If yes I'll go and search my stock ROM haha.
Click to expand...
Click to collapse
If you have already custom recovery installed then no need to flash vbmeta again
sddhruvo said:
I'm using miui 12.0.1 android 11. Twrp install fine but whenever I'm trying to flash or wipe at very end when update partition comes I get 'failed to mount system_root/data/vendor(permission denied)'. Anyone facing this error? Any solution?
Click to expand...
Click to collapse
Ignor it
I cannot get it working. Unlooking was fine. And flashing recovery seems to also work fine. But when I boot to recovery with "power + volume up" It just enters to stock MIUI recovery. And idea?