Related
I am using radio rom 1.35.00.11 and WM6 (xda live 0.2)
now if I want to go back to my original rom, what must I do ?
I assume this radio rom will not permit me to install original rom.
then how can I decrease my radio rom to 1.04 to allow install of original rom.
thanks for your replies.
mrmrmrmr said:
I am using radio rom 1.35.00.11 and WM6 (xda live 0.2)
now if I want to go back to my original rom, what must I do ?
I assume this radio rom will not permit me to install original rom.
then how can I decrease my radio rom to 1.04 to allow install of original rom.
thanks for your replies.
Click to expand...
Click to collapse
Make a NBH radio only RUU using the Modified RUU. Some are already made for you on the Wiki, Which version radio do you want?
Look into the SSPL...
wpbear said:
Make a NBH radio only RUU using the Modified RUU. Some are already made for you on the Wiki, Which version radio do you want?
Click to expand...
Click to collapse
which version should I use to downgrade to my original rom ?
that is 1.20.305.3
mrmrmrmr said:
which version should I use to downgrade to my original rom ?
that is 1.20.305.3
Click to expand...
Click to collapse
So you want Radio 1.20.305.3? I see 1.20.31.10 from a Dopod ROM. I can make that a radio only install for you? I dont see any other 1.20????? Radio ROMS.
wpbear said:
So you want Radio 1.20.305.3? I see 1.20.31.10 from a Dopod ROM. I can make that a radio only install for you? I dont see any other 1.20????? Radio ROMS.
Click to expand...
Click to collapse
sorry ; my original rom is 1.20.305.3
it's not the radio rom.
I just want to be able to go back to rom 1.20.305.3
I don't know which radio rom I need to go to that rom. (not radio rom)
mrmrmrmr said:
sorry ; my original rom is 1.20.305.3
it's not the radio rom.
I just want to be able to go back to rom 1.20.305.3
I don't know which radio rom I need to go to that rom. (not radio rom)
Click to expand...
Click to collapse
If you tell me what radio you want, I can make that for you. Are you trying to get the original radio or OS or both?
I found the entire ROM of 1.20.305.3 it comes with Radio 1.07.03.10 is this the radio only you want?
The Imate 1.20.305.3 OS ROM had the 1.07.03.10 radio ROM
rkorzuch said:
The Imate 1.20.305.3 OS ROM had the 1.07.03.10 radio ROM
Click to expand...
Click to collapse
I am downloading that ROM now. I will post the radio only exe 1.07.03.10 when it is done on the Wiki and here. I am still confused as to what that OP is doing, I think he is confused too
Here is the Radio Only from that ROM. http://rapidshare.com/files/20253696/RUU_Radio_Only_1.07.03.10.exe
I think you guys are mistaking what he wants. He wants to go to a lower ROM version, and he thinks to do so he has to put a lower Radio ROM on - this is not the case.
Using SSPL you can flash just the ROM without the radio, or should you wish, an entire shipped ROM including a radio. You do not need to downgrade your radio to do a ROM change!
wpbear, wow that was fast. can you make a radio only from for 1.20.32 ? thanks
joej said:
wpbear, wow that was fast. can you make a radio only from for 1.20.32 ? thanks
Click to expand...
Click to collapse
Radio 1.20.31.10 is on the wiki now, I dont even see a radio rom or a full rom labeled "1.20.32" Where is that from?
wpbear said:
Here is the Radio Only from that ROM. http://rapidshare.com/files/20253696/RUU_Radio_Only_1.07.03.10.exe
Click to expand...
Click to collapse
thank you. you are so kind and helpful.
I guess this is rally what I need.
If I install this I will have radio 1.07.03.10 and that will let me install my original OS rom 1.20. correct ?
Btw, KevinBaker says something else.
I think that SSPL method could help me also.
But I don't know how to use SSPL. I mean how can I install a shipped rom with SSPL ?
You're getting your ROM's mixed up!
Your phone contains 3 major software parts - the bootloader, the ROM, and the Radio ROM. You're thinking of the bootloader downgrade, which with SSPL you don't need to do any more.
ROM is the Windows/settings etc, Radio ROM is simply the bit that makes the calls/data connections!
You don't need to downgrade your radio ROM to do this!
First of all download the custom RUU updater - ftp://xda:[email protected]/Hermes/Tools_and_Programs/ModifiedRUUUpdater-V2.rar
Then download whichever shipped ROM you want to flash, and extract the files from it. You'll see a file with the extension .nbh - copy this file into the directory that you extracted the modified RUU updater to, and run ROMUpgradeUt.exe from the modifed updater directory. This will push SSPL onto the phone, and update the shipped rom (which will also change your radio ROM automatically). You can then flash a RADIO ONLY update from the Wiki so that you can enjoy a higher Radio ROM version, with your original ROM.
mrmrmrmr said:
thank you. you are so kind and helpful.
I guess this is rally what I need.
If I install this I will have radio 1.07.03.10 and that will let me install my original OS rom 1.20. correct ?
Btw, KevinBaker says something else.
I think that SSPL method could help me also.
But I don't know how to use SSPL. I mean how can I install a shipped rom with SSPL ?
Click to expand...
Click to collapse
It sounds to me KevinBaker is saying what you are exactly trying to do...
instead of just as waiting others help why not do some search
Two threads on SSPL:
http://forum.xda-developers.com/showthread.php?t=293651&highlight=sspl
http://forum.xda-developers.com/showthread.php?t=296722
wpbear,
Not sure if I can make a request here like this, but can you make a custom package of wm6 0.20 rom , with 1.35 trinity radio and the cingular aku 3.3 Ext Rom(with min apps) for me? Really appreciate it - I am not sure how this RUU updater works.
Oh come on, its not that bloody hard to do it yourself - just READ THE WIKI.
Its as simple as this:
- Download XDA Live 0.20.x, flash
- Download 1.35.00.11 Radio ROM, flash
- Download the Ext Rom, install what you need from it.
The information is all here - why not research it yourself, you'll learn a bit and be much more proud of your device as you've done it yourself, rather than just getting someone else to do the hard (well, not so hard) work.
OK..I will try(fingers crossed). Under bootloader mode, my screen shows IPL 1.01 and SPL 1.09 - what should I look out for when I am flashing as your suggested?
If you read the instructions and did some research you'd know that you don't have to worry about your bootloader, as XDA Live and 1.35.00.11 Radio both use the modified RUU updater which pushes SSPL to the phone, so it doesn't matter what bootloader you're using.
I'm using "Shelltool" to install these ROMs.. For the radio, do I just use the same method? By copying the nk.nbf file into the "Shelltool" directory...? Thanks!
legaleye2005 said:
I'm using "Shelltool" to install these ROMs.. For the radio, do I just use the same method? By copying the nk.nbf file into the "Shelltool" directory...? Thanks!
Click to expand...
Click to collapse
I don't think so but i could be wrong,shelltool is for os only.
So how do I install the radio using Vista...?
is there any way to flash the radio with a G4 locked?
many thanks
Yes... you can just flash a radio-only rom on a CID-locked device. You can't flash with vista!
but how do you go about flashing it? just use the program included with the radio rom just like a g3?
thanks
peterson65 said:
but how do you go about flashing it? just use the program included with the radio rom just like a g3?
thanks
Click to expand...
Click to collapse
Yes.... just flash with the RUU. Make sure it's a radio-only rom. If you get error 300, look at this thread:
http://forum.xda-developers.com/showthread.php?t=291215
ok i got it, here you can have all to flash it
cheers
Hi experts,
I've acciedentally flashed my O2 atom life to a wrong rom, and it was recovered by a rom named AL1.DIO & ExRom.img which downloaded from xda FTP sites.
The rom was recovered,however for the warranty reason i need to flash back to O2 original firmware. And when try to flash to it I encountered "Wrong Customer ID", can someone help me how to bypass the CID check and flash to original ROM?
I've tried on the post stated on http://forum.xda-developers.com/showthread.php?t=293632 but the screen didn't show anything after execute the .exe file.
I do not wish to unlock the CID just intend to bypass it, can any experts gimme any idea?
Thanks so much in advance.
i donno if this idea will work... but worth a try...
flash with a custom made ROM for yr device.... then flash with yr company ROM
Go O2 website to download the original ROM. Its shld be pretty simple and straightforward
sadhu_s60 said:
i donno if this idea will work... but worth a try...
flash with a custom made ROM for yr device.... then flash with yr company ROM
Click to expand...
Click to collapse
Hi,
Thanks for the comment. Yes I tried to flash to a custom made ROM but still failed to update back to original latest ROM from O2. Sigh...
Hi experts,
Can anyone advise how to temporary bypass CID check?
Really need it urgently...thanks in advance!
kenzojoey said:
Hi,
Thanks for the comment. Yes I tried to flash to a custom made ROM but still failed to update back to original latest ROM from O2. Sigh...
Click to expand...
Click to collapse
try to flash with the oldest original rom
sadhu_s60 said:
try to flash with the oldest original rom
Click to expand...
Click to collapse
can you englighten me where i can find the original oldest rom for o2 atom life?
Many many thanks....
in atom wiki
i tried flashing my neos rom to WM6.1_Touch_Evolution by maxniper
according to the procedures.. but i cudnt e1 after tryin 2 load the rom it was frequently goin into bootloader mode..
now somehow i managed to load wm5 again back..
can any1 please help me out on how to load the above mentioned rom..
and can i install the diamond rom in my neo??
you have to HARDSPL your device first.
and flash the ROM again.
anurag440044 said:
and can i install the diamond rom in my neo??
Click to expand...
Click to collapse
You can only install ROMs for the Prophet on your device.
anurag440044 said:
i tried flashing my neos rom to WM6.1_Touch_Evolution by maxniper
according to the procedures.. but i cudnt e1 after tryin 2 load the rom it was frequently goin into bootloader mode..
now somehow i managed to load wm5 again back..
can any1 please help me out on how to load the above mentioned rom..
Click to expand...
Click to collapse
Hello
Firts you neew install this rom
http://rapidshare.com/files/54265407/Prophet_PV_Temp.zip
next the ROM you like
check this link
http://forum.xda-developers.com/showthread.php?t=377545&highlight=fantastic
sometimes you need hardslp
http://forum.xda-developers.com/showthread.php?t=353547
I hope you fix tour phone
anurag440044 said:
i tried flashing my neos rom to WM6.1_Touch_Evolution by maxniper
according to the procedures.. but i cudnt e1 after tryin 2 load the rom it was frequently goin into bootloader mode..
now somehow i managed to load wm5 again back..
can any1 please help me out on how to load the above mentioned rom..
Click to expand...
Click to collapse
check my post........http://forum.xda-developers.com/showthread.php?t=353547
Calogero64 said:
Hello
Firts you neew install this rom
http://rapidshare.com/files/54265407/Prophet_PV_Temp.zip
next the ROM you like
check this link
http://forum.xda-developers.com/showthread.php?t=377545&highlight=fantastic
sometimes you need hardslp
http://forum.xda-developers.com/showthread.php?t=353547
I hope you fix tour phone
Click to expand...
Click to collapse
what is hardspl and why is it needed.?i mean i shud install PV_Temp.zip 1st and then hardspl or hardspl should com after the total installation
anurag440044 said:
what is hardspl and why is it needed.?i mean i shud install PV_Temp.zip 1st and then hardspl or hardspl should com after the total installation
Click to expand...
Click to collapse
What you need to do is install PV_TEMP or any other WM5 NVID ROM. From there, you must HardSPL your device. This patches the bootloader and allows the device to load WM6 and WM6.1 ROMs. without it, you get stuck in bootloader.
Once you have HardSPL set up, you can then flash the new WM6.1 ROM.
Thnx so much guys
i finally installed da rom in my neo n m really happy
just 1 last problem..
i cant get the ppt, excel, word etc including the touch cube to work in my cell..
its saying touch cube is not installed
what should i do?
Hello Dear friends,
I have really big problem with this ROM version:3.14.405.2(04666) WWE. It uses 89% of the processor and I cant use any appz that I want because of this. I have problems with the Internet Browser. This problem really makes me unhappy. Is there a way that we can "fix" this. If there isn't I'll have to change from WM to Android.
komanchi_bg said:
Hello Dear friends,
I have really big problem with this ROM version:3.14.405.2(04666) WWE. It uses 89% of the processor and I cant use any appz that I want because of this. I have problems with the Internet Browser. This problem really makes me unhappy. Is there a way that we can "fix" this. If there isn't I'll have to change from WM to Android.
Click to expand...
Click to collapse
Sir you need to remove your HSPL.
Reinstall previous ROM version, remove your HSPL, and install new stock ROM 3.14
kurt-willems said:
Sir you need to remove your HSPL.
Reinstall previous ROM version, remove your HSPL, and install new stock ROM 3.14
Click to expand...
Click to collapse
How can I remove this HSPL? I tried to install other ROM but it didn't work. It couldn't boot the devise after the installation was completed so I installed again the same ROM to run again the phone.
komanchi_bg said:
How can I remove this HSPL? I tried to install other ROM but it didn't work. It couldn't boot the devise after the installation was completed so I installed again the same ROM to run again the phone.
Click to expand...
Click to collapse
same way as installation; use SSPL2_RUN.exe and select spl 1.66
kurt-willems said:
same way as installation; use SSPL2_RUN.exe and select spl 1.66
Click to expand...
Click to collapse
OK I have installed the HSPL2_RUN.exe (spl.1.66). Now which ROM to install? The same that I installed before (ROM version:3.14.405.2(04666) WWE) or other?
With this change it felt to 79% but i think it is still too match.
komanchi_bg said:
OK I have installed the HSPL2_RUN.exe (spl.1.66). Now which ROM to install? The same that I installed before (ROM version:3.14.405.2(04666) WWE) or other?
With this change it felt to 79% but i think it is still too match.
Click to expand...
Click to collapse
Yes sir you can install now stock ROM 3.14! (PS, after first installation do a hard reset)
kurt-willems said:
Yes sir you can install now stock ROM 3.14! (PS, after first installation do a hard reset)
Click to expand...
Click to collapse
It didn't work. Something is wrong. There is no change of now and before????
And I can't install the ROM 3.14 again.
komanchi_bg said:
It didn't work. Something is wrong. There is no change of now and before????
And I can't install the ROM 3.14 again.
Click to expand...
Click to collapse
What's the problem that you have/see?
How did you set previous stock Rom? Is the stock Rom for your device?
Witch is the information on Boot-louder?
kurt-willems said:
What's the problem that you have/see?
How did you set previous stock Rom? Is the stock Rom for your device?
Witch is the information on Boot-louder?
Click to expand...
Click to collapse
After I did hard reset like you said, I started the RUU_Leo_S_HTC_WWE_3.14.405.2_Radio_15.42.50.11U_2.15.50.14_LEO_S_Ship file ... I can't install it. Maybe it's because I have the 3.14 and the ROM 3.14 and the installation is canceling because of this. I tried to do the whole operation again with the TASK 29 but again it didn't start the installation ???
Maybe I have to start all over again?
Wait, let resumate before doing something.
First you mention to have HSPL; then you removed it.
Now you mention to try to install Stock rom 3.14 but you mention that you have stock rom 3.14 on your device?
Can follow it
To be clear.
On witch SPL/HSPL version are you now?
On witch ROM version are you now?
What have you done from yesterday till now? (I mean on your device he )
I will set the hole steps you needed to have don.
- reinstall your previous stock ROM (1.66 ore 1.47)
- remove your HSPL by using HSPL2_RUN.exe
- Install stock ROM 3.14
That's it.
kurt-willems said:
Wait, let resumate before doing something.
First you mention to have HSPL; then you removed it.
Now you mention to try to install Stock rom 3.14 but you mention that you have stock rom 3.14 on your device?
Can follow it
To be clear.
On witch SPL/HSPL version are you now?
On witch ROM version are you now?
What have you done from yesterday till now? (I mean on your device he )
I will set the hole steps you needed to have don.
- reinstall your previous stock ROM (1.66 ore 1.47)
- remove your HSPL by using HSPL_RUN.exe
- Install stock ROM 3.14
That's it.
Click to expand...
Click to collapse
First step is done. I have the 1.66 spl. Now from where to download this HSPL_RUN.exe .... I have HSPL2_RUN.exe. is it the same
kurt-willems said:
Wait, let resumate before doing something.
First you mention to have HSPL; then you removed it.
Now you mention to try to install Stock rom 3.14 but you mention that you have stock rom 3.14 on your device?
Can follow it
To be clear.
On witch SPL/HSPL version are you now?
On witch ROM version are you now?
What have you done from yesterday till now? (I mean on your device he )
I will set the hole steps you needed to have don.
- reinstall your previous stock ROM (1.66 ore 1.47)
- remove your HSPL by using HSPL_RUN.exe
- Install stock ROM 3.14
That's it.
Click to expand...
Click to collapse
First step is done. I have the 1.66 spl. Now from where to download this HSPL_RUN.exe .... I have HSPL2_RUN.exe. Is it the same?
I found HSPL.exe from this site: http://www.mediafire.com/?ukjzmd2dn0w ... is it the same?
komanchi_bg said:
First step is done. I have the 1.66 spl. Now from where to download this HSPL_RUN.exe .... I have HSPL2_RUN.exe. Is it the same?
I found HSPL.exe from this site: http://www.mediafire.com/?ukjzmd2dn0w ... is it the same?
Click to expand...
Click to collapse
Sorry It was me who forgot to wright the 2.
You need HSPL2_RUN.exe
kurt-willems said:
Sorry It was me who forgot to wright the 2.
You need HSPL2_RUN.exe
Click to expand...
Click to collapse
OK how to remove your HSPL by using HSPL2_RUN.exe ...is it to install the spl-1.66.0000
From where to install this - Install stock ROM 3.14
komanchi_bg said:
OK how to remove your HSPL by using HSPL2_RUN.exe ...is it to install the spl-1.66.0000
Click to expand...
Click to collapse
Yeah, spl-1.66 ore 1.47 is ok (personally I use always the 1.66)
kurt-willems said:
Yeah, spl-1.66 ore 1.47 is ok (personally I use always the 1.66)
Click to expand...
Click to collapse
OK last step => From where to install this - Install stock ROM 3.14
komanchi_bg said:
OK last step => From where to install this - Install stock ROM 3.14
Click to expand...
Click to collapse
You have a WWE unbranded device?
or is it branded?
If it is unbranded; here you have a link:
http://www.multiupload.com/IB4BASVY1I
kurt-willems said:
You have a WWE unbranded device?
or is it branded?
If it is unbranded; here you have a link:
http://www.multiupload.com/IB4BASVY1I
Click to expand...
Click to collapse
What's the difference. I bought it from Operator.
komanchi_bg said:
What's the difference. I bought it from Operator.
Click to expand...
Click to collapse
Go to this webpage:
http://www.htc.com/uk/SupportDownload.aspx?p_id=297&cat=2&dl_id=1043
Enter your Serial Number from your device on it.
If you can download it it is a unbranded device.
kurt-willems said:
Go to this webpage:
http://www.htc.com/uk/SupportDownload.aspx?p_id=297&cat=2&dl_id=1043
Enter your Serial Number from your device on it.
If you can download it it is a unbranded device.
Click to expand...
Click to collapse
I can't ("Sorry, this software download is not suitable for your device.")...
And when i try to install it => verify that you want to update the ROM version: From: Image version:3.14.405.2 => To: mage version:3.14.405.2