Now that i have finally been able to get WMDC working with my TyTn in vista, I'd lik eto know if anyone has successfully flashed there phone using vista?
I'll give it a go sometime over the weekend if no one has.
ptm
I have tried to Flash but does not work for me, but I have a dual boot so flash with xp.
Flashing not working on Vista RC1.5728
Syncing on Vista RC1 is possible, as mentioned in this thread:
http://forum.xda-developers.com/showthread.php?t=275786
So far, everything I tried, including bootloading, with TyTN, results in error 260. It is listed an an error caused by an open port, but I've not been able to run down a fix for this. The official WMDC is being released soon, check above link.
Related
Hi .
I'm planning on upgrading the rom on my MDA Vario II (Dutch).
First I want to unlock the CID. I've got a 1.04 bootloader.
Recently I upgraded to MS Vista (RTM).
When I try to run the patched radio upgrade I always get a ERROR 150.
Yes.. I'm in bootloader mode. It's says IPL-1.01 and HERM300 SPL-1.04.
Could it be Vista??
yes its vista its had something to do with the sync tool in vista they will fix it according to a earlier post next time use the search function there is a thread about Vista and Ruu
I don't think they have released Mobile Device Center for Vista RTM yet... Right now, you see the phone as a drive... Or did you install the beta MDC?
both. I access the phone through the explorer. And I have the beta MDC setup for syncing with outlook etc.
This has been posted a million times, but here we go...upgrading ROMs will not work on Vista until manufactuers update their usb driver code on the installer; until then, use XP/2003. By the way, is that pirated Vista you have?
cant he just upgrade the rom from SD? I have a (legit) final of vista, but havent tested it yet, since i dont see the need for an uprade atm.
I have the Mobile Device Center installed and it all works perfect.
So, if you cannot do it, due to a bug in Vista, maybe the SD works
You have to be careful as if the program crashes during the upgrade of the rom you can brick your device, so I will stay with XP or SD card way to flash a rom.
aquasesh said:
cant he just upgrade the rom from SD? I have a (legit) final of vista, but havent tested it yet, since i dont see the need for an uprade atm.
I have the Mobile Device Center installed and it all works perfect.
So, if you cannot do it, due to a bug in Vista, maybe the SD works
Click to expand...
Click to collapse
I have Vista RTM and I confirm that the MDC is not stable enough for all these update work... it failed for me a few times and I'm lucky with my 8525 and it is still working OK after reflashing it with another PC (XP).
Aha. That explains that.
I've just managed to get my JasJar stuck in bootloader mode after trying many times to upgrade the ROM. This, despite the upgrade tools telling me there are errors.
Curses.
Apparently people don't know how to read what I posted...
ITS SAFE
I already flashed my Universal with Vista
-First need to install MDC, could be beta from MSDN, because it will update.(still don't know why it's not included on RTM)
-Run compability mode WIN XPSP2
-Run as Adm
thats it...
ISN'T Safe!
phamoui said:
I already flashed my Universal with Vista
-First need to install MDC, could be beta from MSDN, because it will update.(still don't know why it's not included on RTM)
-Run compability mode WIN XPSP2
-Run as Adm
thats it...
Click to expand...
Click to collapse
I am testing vista since CTP (Community Technology Preview), then RC1 (Release Candidate), RC2, now RTM (Ready To Market) as Technet Plus Member.
I can't say is safe to use it even for day by day syncing, I have always unpredictable results; my TyTn sometimes is a Smartphone, sometimes Pocket PC, syncing? may be, every time you connect you have to guess...
This happens because Windows Mobile Device Center (WMDC not included in Vista RTM) is still in BETA 3 stage, not even RC!
LESSON LEARNED
If you plan to install VISTA and you are a WM expert or just business user DON'T upgrade your XP, just install VISTA on a second HD and use your XP to solve the VISTA problems. Even Virtual PC 2007 (good to have with XP installed to have available some appz still not VISTA upgraded) couldn't use USB port, so no way to have a safe "old style" USB connection
Isn't VISTA fault, is a new tecnologies-early adopters problem
One of the most common source of problems with vista are USB drivers (no way in my knowledge to have a simple webcam working with VISTA)
This has great importance when you are doing something "uncommon" and "mission critical" like flashing something!
Hello,
I tried to upgrade my SPV M1000 to WM5. I followed the procedure and ran the device in bootloader mode. I put the device on the cradle and it displayed USB and V1.06. Ok sounded good.
I started then the HimaUpgradeUt.exe program on the PC. The problem is HimaUpgradeUt.exe didn't find the mobile device at all. After maybe 1 minute looking to it displayed an error 101 message.
I tried different things : install ActiveSync 3.8, 4.2, 4.5 (no change)
I tried to connect the device with mty and it worked !
I tried to run HimaUpgradeUt.exe with the SPV running WM2003 and it found the device. I didn't try to upgrade in this mode anyway.
Any help is very welcome.
is your machine with win vista also?
as you said that you tryed to install ActiveSync 3.8, 4.2, 4.5, guess its WinXP. if its 2000/WinXP/win2003 then use only 4.2 version of ActiveSync. don't know why but i can only have sucess with that version. check for any security software that may block COM. with ActiveSync-Pocketpc.
that HimaUpgradeUt.exe you use is for your model? as im not an expert on this matter, don't know if your precise phone is a himalaya, maybe thats the prob. ehehhe then maybe not as im not aware of all the brands this peace of tech can became!
do right click on my computer and select manage, goto device manager and see for a mobile entry there, while your pocket is connected in serial/usb boot mode. there must be a windows ce device there for this to happen, and you should, not a must, but try to shut activesynch down while doing this detection with HimaUpgradeUt
Yes I'm running Windows XP Pro SP2. I installed activesync 4.2 again and disabled the firewall. I can see windows detecting the device when I put it on the cradle. But there is still the 101 error message when I try to run the update.
Vista and upgrade
Firstly thanks to marcjero for guiding me to this thread...
secondly... I had no probs at all, syncing my device with vista's WMDC(Windows mobile device center), apparently I tried to flash my device... and yes its an i-mate XDA II, currently running on C_ShekharAKU3.5.R40.P24_public_ROM and want to update to the latest one... apparently, connected my device to my system in bootloader mode... and well since then my system has a prob detecting my device... and I cannot even sync now... when i try to run HimaUpgrade, get the same 101 error code... :-(
any ideas how to get this thing working again?
PS: its seriously frustrating for me
use the "HimaUpgradeUt_noID.exe " instead the "HimaUpgradeUt.exe"
download it HERE!
install the latest Active Sync...version 4.5
Syncing in Vista is no problem but as i said from other thread...i tried but not working...you cannot flash the device except in winxp...
Regards!
jojo
syncing not working either...
xda2jojo said:
you cannot flash the device except in winxp...
jojo
Click to expand...
Click to collapse
The prob is that now a normal sync does not work either... so I cannot synchronize my device with my system at all :-(, any ideas at all... on how to get it to work?
xda2jojo said:
use the "HimaUpgradeUt_noID.exe " instead the "HimaUpgradeUt.exe"
download it HERE!
install the latest Active Sync...version 4.5
Syncing in Vista is no problem but as i said from other thread...i tried but not working...you cannot flash the device except in winxp...
Regards!
jojo
Click to expand...
Click to collapse
I tried both (as 4.5) and HimaUpgradeUt_noID.exe without any success.
daWidoW said:
The prob is that now a normal sync does not work either... so I cannot synchronize my device with my system at all :-(, any ideas at all... on how to get it to work?
Click to expand...
Click to collapse
marcjero said:
I tried both (as 4.5) and HimaUpgradeUt_noID.exe without any success.
Click to expand...
Click to collapse
what OS you are using while flashing and synching? xp? vista?
I'm running XP SP2
About Vista...
Read this thread
Could worth to try.
I tried to flash using my work laptop and it's working now
44% processed, finger are crossed...
Hi,
Just wanted to know if wm6 upgrading works fine on vista and sync centre? I've been upgrading on xp, but just wanted to know about vista as well..
Thanks,
James.
i think no you must do it with xp
I did a success upgrade to WM6 on my Prophet with Windows Vista with Sync Center a couple of days ago.
Vista is supported for upgrade in the official rom .
The first time I did an upgrade to a PDAViet rom it was successful in vista. I tried on vista 32
On Vista x32 it's possible with some focus but on vista x64 forget. I'm use vista x64 and when I wont install new wm6 i am going on windows XP!
under vista 32bit it is possible, but not under vista 64bit. afaik some of the flash tools are 16bit applications and these don't work on a 64bit OS.
I have vista ultimate build 6000 32bit i tried the vista upgrade guide on this site but still my RUU crashes..................
something which can help but with without any warranty:
install vmware and set up a virtual windows xp machine on your vista system.
the newest vmware allows to intercept all new plugged-in usb devices to let them appear within the vmware.
with this i could connect my prophet to activesync within that VM.
but it always aborted the flash procedure at 80%
Fady said:
I have vista ultimate build 6000 32bit i tried the vista upgrade guide on this site but still my RUU crashes..................
Click to expand...
Click to collapse
I cann't explain, but some ROM do and others don't. For instance a have a NVID RUU that works well, but the famous Step 1 files from PDAViet an Mobis don't work at all.
it never worked with me, am using Vista Ultimate 32 bit and there is something mentioned on www.mahmood1.com about having to change a driver and restart a service, but no luck at all....i also tried VMware and i could only use step1 but Step2 did not even start!!
adamsuail said:
it never worked with me, am using Vista Ultimate 32 bit and there is something mentioned on www.mahmood1.com about having to change a driver and restart a service, but no luck at all....i also tried VMware and i could only use step1 but Step2 did not even start!!
Click to expand...
Click to collapse
In my experience, Step 2 is no problem under Vista, but I can't get step 1 done. Not even with the drivertrick. An other NVID Ruu worked though.
I have no experience or knowledge of VMware you mentioned... what (and where) is that?
I have Vista ULTIMATE X64. I cant do nothing... Looks like stuff working only on XP.
Fantazmas said:
I have Vista ULTIMATE X64. I cant do nothing... Looks like stuff working only on XP.
Click to expand...
Click to collapse
At least the beer is right....
Icant get to work the RUU on VIsta
Icant get to work the RUU on VIsta. It gives error 260. unable to connect onece the bootscreen appears. Any way around?
jugulator said:
Icant get to work the RUU on VIsta. It gives error 260. unable to connect onece the bootscreen appears. Any way around?
Click to expand...
Click to collapse
not that I know off, would be a breakthrough. I figured out (just by trying) that the RUU is not the problem itself, its the nb file that isn't always compatible. If I find more solid an workable information/solution ofcourse I let it know.
I recall reading that the software for unlocking/flashing custom roms was for XP only. Is there a solid, working solution for Vista yet? If not, is anyone planning to make one?
How does activesynch work with vista & outlook 2k7? Any downsides to upgrading?
Might have been problems with Vista 64, I'm running Vista 32 and have never had a problem with custom roms.
Im a vista user and never had any problems, i never read too much into it but from what i understand its because they dont update their drivers. Someone posted the driver update in this section. Ive tried dcd's and currently using no2chems latest.
Using Vista
I use Vista on my laptop and have been experimenting with the HTC Titan since mid December.
So far, I never had an issue with Vista ( and I have experimented lots!!)
The only thing with Vista on my phone compared to my XP desktop at work is that the transfer of files to the HTC is must faster with XP. The XP machine also connects and syncs a bit faster than the Vista.
I can confirm that running Titan_Unlocker, and loading ROMs via Vista 32 with Windows Mobile Device Center works just fine.
Vista USB
I have not been able to connect with USB on my computer runing vista. I use of course windows mobile device and connect thru bluetooth, but have never been able to connect with usb. I checked the setting I WMB and have allow usb connection,.
I can tell you from experience that flashing thru bluetooth boes not work. Tried it about a year age with the Vzw upgrade on my 6700, locked up in bootloader screen, I took it to vzw and they gave me a new 6700.
That's odd ^
My Sync works both ways, and out does XP in every single way.
Vista performance depends on hardware mostly, and top notch gets you top performance.
I haven't had any problems syncing with vista.
I did have one problem when trying to upgrade to a custom rom and maybe someone here can help me answer it.
I got the sprint 3.16 test rom on there ok, then i installed the unlocker, but i couldn't get out of bootloader screen. I had the exit bootloader program but it kept saying it couldn't find the usb. then i tried attaching it to my xp comp and running the exit bootloader app and it said it was missing some dll file. so i tried redownloading and even emailing the exit bootloader from my other comp but same issue, missing dll file.
I ended up just loading the relocker and then going straight back to the latest rom because i couldn't figure it out.
When I try to run Hard-SPL I get the message "AthenaWrapper has encounter a problem and needs to close. We are sorry for the inconvenience". What should I do? Can someone help me?
I've had and 8125 and a Tilt. I just got my FUZE today and cant wait to try some of these ROM but can't get HARD-SPL to work and I don't know why.
If running in vista try to run the wrapper with administrator rights (right click on .exe file -> run as administrator).
Im actually fortunate enuf to still be on XP. I did the run as and at least now it begins but it wont start as I am now getting a ERROR [202]: Connection problem.
Same Problem
WayneC003 said:
Im actually fortunate enuf to still be on XP. I did the run as and at least now it begins but it wont start as I am now getting a ERROR [202]: Connection problem.
Click to expand...
Click to collapse
I have the same problem being discussed in the HardSPL thread. I had an 8525 that I immediately HardSPL, flashed many ROMs, and am running XP. I get the same Error: 202. There have been some suggestions made in that thread but none have worked for me. Tethering, ActiveSync and access to the FUZE as a hard drive works flawlessy before and after I try to HardSPL. I don't have a clue what the problem is. Since these connections all work flawlessy with the exception of the HardSPL application, it is hard for me to believe it is a connection issue. Immediately after getting the error I check ActiveSync status on the FUZE and the PC and they are fine. I have even tested them and they work.