Cingular 1.34 ROM update UMTS issues - 8525, TyTN, MDA Vario II, JasJam Software Upgradin

I wanted to know if anyone is experiencing similar issues.
I have a Hermes 100 O2 with a recently updated 1.34 Cingular ROM.
I also live in an EDGE area that borders a UMTS area.
What I've noticed is that whenever I transition from one area to the next (like in the car) I have had everything from lost calls, to bluetooth functionality dropping, to having the phone lock up and having to do a soft reset to get function restored.
Once I'm inside the area, the phone acts normal. It's just ANY transistion from UMTS to EDGE or visa versa is when I get this behavior.
I was on the Dopod 1.23 ROM previously and experienced none of this.
Anyone with ideas or similar experiences?

i downgraded to v1.31. on v1.34, when i use file explorer to look at files in storage card, it also freeze/lockup.
i believe v1.31 is more stable. also it' aku 2.6!

Interesting thought.
I know Sleuth255 is running 1.31. Maybe that's why.
I may go that way.

I am daily transitioning from EDGE to UMTS usingn 8525 ROM 1.34 and no problems

Are you in iddle mode or dedicated mode?
Are making a voice call or data ?
For voice it should work both ways unless the network parameters were not optimized in your area
For data it will work only from 3G to 2G with a slight interuption
if you are on EDGE and transitioning into UMTS it will not work. you will stay on EDGE though and no interuption

eeter said:
Are you in iddle mode or dedicated mode?
Are making a voice call or data ?
For voice it should work both ways unless the network parameters were not optimized in your area
For data it will work only from 3G to 2G with a slight interuption
if you are on EDGE and transitioning into UMTS it will not work. you will stay on EDGE though and no interruption
Click to expand...
Click to collapse
I was only referring to voice. Once per week I make a trip that starts in an Edge zone, enter a small 3G Zone, exit that zone back to Edge for about 15 miles then enter a 3G zone at the end of the trip.
The main thing I have noticed is that whatever zone I am in when I make the call, the phone usually works until the call is over. Then I have had everything from bluetooth drops to signal failure, once the entire phone locked up.
All of those scenarios result in me having to soft reset the phone.
On one occasion, I received a call while in the small 3G zone and upon leaving the zone, the phone dropped the call. In fact the person called me back 3 times and each call was dropped after about 2 minutes.
I'm not sure what to think at this point.
The fact that 3G Zone 1 is King of Prussia PA (Cingular PA headquarters) and the 2nd 3G zone is Philadelphia PA
has me thinking, they may still be trying out different things as these areas are 3G aware but not updated on the Cingular coverage map yet.
I had much better consistency on the Dopod 1.23 ROM. It never missed a call or dropped transitioning from one zone type to another.

Why don't you just set the phone to stay on the EDGE network and not switch to 3G? This should solve your problems. I do this often, though not for the reasons you discussed but to save battery life! I can't even get a full 12 hours on 3G these days in NYC!

CJNYC said:
Why don't you just set the phone to stay on the EDGE network and not switch to 3G? This should solve your problems. I do this often, though not for the reasons you discussed but to save battery life! I can't even get a full 12 hours on 3G these days in NYC!
Click to expand...
Click to collapse
I'm glad I'm not the only one with that problem. I got a full 7 hours this AM. I was using LogMeIn for 4 of them, but I was really surprised at how fast the battery drain was.

1. All 3G software devices including Hermes are still buggy and new releases are still coming. CW is focusing oh the LG CU500 for the launch with Video Share. service
2. The Cingular 3G network is going an optimization campaign which might last until January. Ericsson and Lucent patches to remedy some major issues are scheduled for the end of the year. The GSM/EDGE R99/HS two-way handover is not yet optimum.

CJNYC said:
Why don't you just set the phone to stay on the EDGE network and not switch to 3G? This should solve your problems. I do this often, though not for the reasons you discussed but to save battery life! I can't even get a full 12 hours on 3G these days in NYC!
Click to expand...
Click to collapse
Good Idea.
I guess the fact that it seemed to work better on an asian ROM than Cingular's own ticked me off a bit.
The clear thought is to force EDGE for the time being and see what develops with 3G around here in the near future.

I also saw this, especially the call dropping and then each following call also dropping - all this when I often had excellent coverage. I haven't tried Cingular's ROM though.
EDIT: I tried the Cingular ROM and after about 15 mins (plus the amount of time to download the HTC ROM again) I am reloading HTC's 1.18 TyTN ROM. For some reason, my phone wouldn't stay connected to the network longer than about 30 seconds, then it would drop the connection and stay disconnected for minutes - sometimes I had to reboot to get my network back!
I hope HTC releases an update soon, and I hope Cingular gets their **** together and fixes transitioning between GSM and UTMS.

richy240 said:
I also saw this, especially the call dropping and then each following call also dropping - all this when I often had excellent coverage. I haven't tried Cingular's ROM though.
EDIT: I tried the Cingular ROM and after about 15 mins (plus the amount of time to download the HTC ROM again) I am reloading HTC's 1.18 TyTN ROM. For some reason, my phone wouldn't stay connected to the network longer than about 30 seconds, then it would drop the connection and stay disconnected for minutes - sometimes I had to reboot to get my network back!
I hope HTC releases an update soon, and I hope Cingular gets their **** together and fixes transitioning between GSM and UTMS.
Click to expand...
Click to collapse
Were you in a 3G area when you tried the Cingular ROM?

l3G3ND said:
Were you in a 3G area when you tried the Cingular ROM?
Click to expand...
Click to collapse
Yes, but I tried it in both GSM and UTMS ("Auto") modes.

Cingular ROM downgrade error
Good morning, i have a Vodafone PDA1605 (TyTN etc.) I've updated the ROM with new Cingular version available on this site (1.34.502, bootloader 1.06), now I need to downgrade to older version with same CID (1.30.502, bootloader 1.04) but I receive an ERROR "Wrong Vendor ID" every time i retry to flash the ROM (following the procedure... restarting the update without disconnecting the PDA).
I've also tryed to put other ROM with bootloader 1.06 (new Vodafone FRA... i will upload when tested) but I receive the Error: "Wrong Model.."
Could someone help me?
Emanuele

emsparac said:
Good morning, i have a Vodafone PDA1605 (TyTN etc.) I've updated the ROM with new Cingular version available on this site (1.34.502, bootloader 1.06), now I need to downgrade to older version with same CID (1.30.502, bootloader 1.04) but I receive an ERROR "Wrong Vendor ID" every time i retry to flash the ROM (following the procedure... restarting the update without disconnecting the PDA).
I've also tryed to put other ROM with bootloader 1.06 (new Vodafone FRA... i will upload when tested) but I receive the Error: "Wrong Model.."
Could someone help me?
Emanuele
Click to expand...
Click to collapse
To get around this issue, it seems like the consensus is to install the original ROM that came with your phone. Hopefully that will put your bootloader back at 1.04. (Your Vendor CID must match exactly when doing anything with 1.06)
Once you get it back to your original ROM, you should then be able to move up.
all of this is assuming your original ROM was a 1.04 BL
Hope this helps.

Is there an easy way to switch from GPRS to UMTS?

l3G3ND, I have the same problem as you but I don't have the Cingular Rom. I have the original Rom (including original radio Rom) that came on the HTC Tytn and I get same issue as you. Only difference that I don't have to soft reset.. I just have to turn the phone radio off and back on again in Comm Manager.
Just letting you know so you can see that perhaps it's not the Cingular Rom??

Related

Radio problems

afternoon all, bit of a newbie here but will try and get my problem accross.
I have an orange M3100 with whatever rom that comes with as standard, to make it except a t mobile sim i used the free unlocker from here, version 2. this all worked fine until 2 months later my phone locked up on me and i had to hard reset. this went ok until when it was loading the rom. it got to the orange2006.tsk and always froze. after many many attempts i noticed on the boot screen it said NO GSM. i looked around here and realised i had a corrupt radio or no radio at all. confused i downloaded the radio only 1.35 and installed. finally success my phone loaded the rom which by now i had the xda live 0.20 and the radio worked fine. the problems i am having now are that whenever the phone looses signal, it won't in the conventional sense try and search or show the icon saying no signal. it just shows the last known signal strength before it was lost and then when i do want to make a call or send an sms it says "Phone operation failed" and looses signal and then tries to lock on again. this is extremely annoying as my girlfriend has reminded me on many occassions when trying to contact me, she just cannot get through. it gives her a dead tone.
i have tried flashing the device with the proper orange rom off the site thats from romania or somewhere to get an offical orange radio rom on again and then i flashed to xda live 0.20 and its still doing it.
is my radio just buggered or is there a simple flash solution i can do to fix it.
the phone is currently using XDA live 0.20 with radio 1.35.00.11 and bootloader 1.4 super CID (i think, as i can load any rom on it)
also to point out the phone never did this loosing signal and not changing thing before i had to hard reset.
thanks all and sorry for the long post.
it seems the problems seem to stem from Edge here in the uk on orange. i never saw the E icon before i upgraded the radio shack and now its coming up and errors. i never get the hanging problem with that.
anyone suggest anything? as i know edge is faster gprs i dont think i can disable it
thanks all
Consider changing your radio
I would start by changing to an older stable radio, perhaps 1.27. 1.27 is a very stable radio (in my experience), and it seems very tolerant. If that does not help, I would try to upgrade to the latest radio, 1.38. I am using it with the WM VI Black Ed. ROM without any problems here in the United States.
Good Luck! (Gotta keep the girl friend happy!)

Help diagnosing a Radio problem...

Couple of days ago I flashed my Vario II with the HTC 2.05 ROM + 1.38.10 Radio ROM. Before that, I was happily using the SA HTC 1.35 ROM.
After updating the ROM, I noticed that I could send and recieve texts, but not make or recieve any calls. I though it was just a network problem so I spent yesterday in Brighton visitng my sister.
Now, although I couldn't make or recieve any calls at home, when I got down to Brighton I was able to call. When I got home to my girlfriends later that night, I was able to connect to the web and browse a few pages (missed MOTD and Rugby. Needed the scores!).
Back at home today, and I'm still getting the same problem. I've now tried Radio ROM's 1.38.10, 1.35 and 1.27 without any luck.
If I force the signal to GSM, the signal strength shows 2 bars, so pretty weak. If I set it to Auto, it states that 3G is available and at full strength! Clearly its being reported incorrectly?
Now, is it the case that the 3G signal is just about detectable but too weak to send and recieve calls? Because it can detect a faint 3G signal, is that why it appears not to be falling back on GSM? I'm guessing here.
If thats the case, why the hell did I not get any problems with the 1.18 Radio ROM is the SA firmware?
I've found the location of my local T-Mobile Mast, so I'm going to pop over near it so I can rule out a signal problem. But apart from that, is there anything else that could be causing this problem?
Hi there, I seem to be having the same problem.
I have a week old Vario II, as my mobile number has yet to be ported to Tmobile I am still using my old phone.
However, evening I tried making a call from my Vario II and just received 3 beeps and a hang up. When the intended caller tried to call me back the phone rang but again ended the call after 1 ring. I tried a couple of different SIM cards with the same results.
I had SIM unlocked and SuperCID'd the handset a few days ago, and thought I may have buggered something up along the way so I done a hard reset. This time the 3G icon didn't appear but I was able to make calls. A few minutes later the 3G icon appeared and once again I was back to not being able to make/receive calls.
Gurubumsmack, have you managed to resolve your issues at all ?
Also being a bit wet behind the ears with the Hermes, what OS, Radio builds would you recommmend ?
Thanks, Dan
Try forcing the Band to GSM instead of Auto (3G) and see what happens.
Mine is now working perfectly with the 1.38.10 Radio. I left it on GSM for a couple of days and then slapped it back to Auto (3G). Has been fine for about a week now touch wood.
The only fault I can put it down was a local transmitter issue.
I'm currently using the HTC 2.11 WM5 AKU3.3 ROM, which comes with the 1.38.10 Radio. Stability is top notch and speed great.
I decided to hold off flashing to WM6 until development on that settles down a bit. Literally a new ROM being released every week over there!
It's true that 2.11 WM5 AKU3.3 combined with 1.38.10 RADIO is rocking stable...

best radio for O2?

First off, I did try to search for O2 but it is too short for this forum's search engine.
I have a Hermes that was originally on T-Mobile but I have used it on Vodafone for months without issue. I recently took a new job and they are on O2 but I have no end of issues with the phone being able to hold onto a decent signal. It constantly drops everything (phone and gprs/edge) and then reconnects sometimes minutes later. I also constantly miss calls because it won't drop the data connection in favor of the call.
Thinking that the phone might be on the way out, I tried it with my Voda sim and it works briliantly again. So aside from a horrible O2 network, could there be a better radio rom tailored to O2?
Unfortunately radios are hit and miss, you just have to try a few to see which one works best for you.

Keep losing data connection.

I have an unlocked unrooted S3 on Vodafone UK. This issue has been happening for the last few days whereby i have full 3G/H+ connection, but absolutely no data is working. No email, no websites loading, no whatsapp, nothing. The issue goes away as soon as I restart my phone, but then it comes back after a few hours.
Has anyone experienced this, and if so, how have you fixed it?
Go back to your network/phone provider .
Or flash different modem .
jje
I am having this issue too. I may be wrong, but i realise this happens if i turn off my Wifi, the 3G will not want to connect to the 3G network.. Anyone else having such problem?
By the way mine is International version (Location: Singapore)
I'm having a similar problem where I have a good 3G/H/H+ connection but data seems to drop intermittently across all applications - I get the same sort of error message in browsers/facebook/twitter that you receive when you have no signal.
Anyone have anything similar and know of any fix?
I am not having such issue so far. I been updating my SGS3 using over-the-air update. I guess the MODEM has been updated as well.
Go to market and download "fast dormancy"(by gorkhanmoral) then disable it and reboot.
Check if your speed has improved,if it got worse then enable it again.
U need ROOT to use this tool.
I it didn't help, then flash a different modem
This is good modem
Cwm flashable
flame1845 said:
I have an unlocked unrooted S3 on Vodafone UK. This issue has been happening for the last few days whereby i have full 3G/H+ connection, but absolutely no data is working. No email, no websites loading, no whatsapp, nothing. The issue goes away as soon as I restart my phone, but then it comes back after a few hours.
Has anyone experienced this, and if so, how have you fixed it?
Click to expand...
Click to collapse
have you got any battery saving app like juice defender installed in your phone?
Is mobile data working at all? or is it constantly "uploading" but never "downloading" (up arrow lights but not down).
If what I just described is your issue then this is a network issue relating to android in general.
Basically your phone will be connected to two radio towers and gets confused as to which one it should use, rebooting or flight mode may help force it onto one tower or you may have to speak to your carriers "high network technical team" or whatever they are called for you to get them to force it onto one tower.
I had this issue on the HTC hero (a long time ago now) and it took 9 months for Orange UK to work out what was going on.
and it took 9 months for Orange UK to work out what was going on.
Click to expand...
Click to collapse
Congrats. Orange Luxembourg (my gf's network provider) still hasn't got a clue.. But they seem rather clueless about everything except writing invoices.
Flashing an Asian modem on her S2 made the issue far less prominent since they seem not to get confused by antenna ping-pong. (Tango Luxembourg, my carrier, has this issue too in the main city)

[Q] 3G not working

Hi there.
I have Lumia 920 Black on EE in UK.
Last month when Amber (french one) got leaked, I installed it and tried straight away.
It wasn't big difference to me in fact it had a bug where if I create an all day calendar entry using google account (not tried with Live account),
it will save the even entry as day before?
It bugged me so much so I decided I will install EURO Dev version.
So I did and everything seem to work fine untill I go outside my house.
I kept on getting no signals. And when I had signal it was constantly on EDGE. Never on 3G.
I did reflash and restart and all it doesn't seem to help. When I restart the phone I get 3G briefly for seconds until it loses service totally then come back with full EDGE signal.
I have found a old firmware RM821_1232.2109.1242.1010_RETAIL_eu_euro1_342_10_97021 and flashed it. And did update through OTA.
Still no 3G. I called EE today for help. They told me it could be the sim.
So I tried on my old iPhone 4 and its all good. I get full 3G.
Anyone know what may be the problem? And if EE offers a repair, will they found out that I've playing with flashing the device and tell me its not covered by the warranty?
Thanks you all!
over 60 views and no reply?
langsalang said:
Hi there.
I have Lumia 920 Black on EE in UK.
Last month when Amber (french one) got leaked, I installed it and tried straight away.
It wasn't big difference to me in fact it had a bug where if I create an all day calendar entry using google account (not tried with Live account),
it will save the even entry as day before?
It bugged me so much so I decided I will install EURO Dev version.
So I did and everything seem to work fine untill I go outside my house.
I kept on getting no signals. And when I had signal it was constantly on EDGE. Never on 3G.
I did reflash and restart and all it doesn't seem to help. When I restart the phone I get 3G briefly for seconds until it loses service totally then come back with full EDGE signal.
I have found a old firmware RM821_1232.2109.1242.1010_RETAIL_eu_euro1_342_10_97021 and flashed it. And did update through OTA.
Still no 3G. I called EE today for help. They told me it could be the sim.
So I tried on my old iPhone 4 and its all good. I get full 3G.
Anyone know what may be the problem? And if EE offers a repair, will they found out that I've playing with flashing the device and tell me its not covered by the warranty?
Thanks you all!
Click to expand...
Click to collapse
I know the issue exist on the ATT Dev Rom, you just have to go into the Access Point app in the settings and pick the correct APN, (the flash defaults it to the wrong one. ) but I don't know if that's the case for the EE version. I suppose is possible, it can, and is suppose to load, the APN from the Sim, so if it worked with the iphone sim then check those settings.
Thanks for you reply. Did what you said but it did not help at all. It's not like my data isn't working. It's just on EDGE all the time. Sometimes I don't even get calls through and later get message from EE saying I had a miss call. Called Orange (runs on EE) about it and they said maybe its my sim. So tried it on my iPhone and I get 3G straight away. Need to ring them again. But their call waiting time is ridiculous. Called them yesterday and call queue was 2 hours!!

Categories

Resources