Related
Hi Guys,
My xdaII died while I was trying to upgrade to WM2003SE. Now there is a black screen with message USB v1.01. No matter how many times I reset the device, it does not get past this screen. When connected to pc, Windows XP detects USB device BUT activesync 3.8 says not connected. and if I run the ROM upgrade it comes with error ERROR 101: CONNECTION ERROR.
Any ideas from anyone who has gone thru this.
I would really appreciate help.
First thing to do calm down and relax.. you xdaII will be revived in no time
Press "Power Button" + "Reset Button" to go to bootloader screen then try to reflash it again...
Post a reply if still...
Hi double_ofour
Done that about 15 times now same problem and same error I am afraid.
try this
put it in bootloader mode and start reflashing it aggain
you can try it with another pc if the problem is activesync
but if boot loader start you can put the rom back i think
himalayaupgrade doesnt use activesync
Guys you all are the people.
trying it on my laptop and it is upgrading now showing 7%.
Thank you Thank you Thank you Thank you Thank you Thank you Thank you !!!!!!!!!!!
You all are always welcome here in XDA-Developers!!
SPV M2000
My SPV M2000 died while I was trying to upgrade to WM2003SE. Now there is a black screen with message USB v1.01. No matter how many times I reset the device, it does not get past this screen. When connected to pc, Windows XP detects USB device BUT activesync 3.8 says not connected. and if I run the ROM upgrade it comes with error ERROR 101: CONNECTION ERROR.
i did put it on bootloader mode but i dont know how to flash it?
do i need to have some Firewire ?
if so where can i get it ? any body help
thanks
try to activsync 4.1,when i downgrade my device like you,but i try again try again try again,it succesful
xda2 boot 1.03
hitla said:
Guys you all are the people.
trying it on my laptop and it is upgrading now showing 7%.
Thank you Thank you Thank you Thank you Thank you Thank you Thank you !!!!!!!!!!!
Click to expand...
Click to collapse
can you please give me link where i could get latest WM2003SE??? coz im planning to upgrade my "PH10B".
hiiiii Plz help~~~!!!
HI im Robin, nd im using O2 XDA II Pocket PC
few days back i tried to upgrade windows version to WM2003 SE but coz of sum reason upgrading failed inbetween and now my XDA showing same thing as said above...... "SERIAL V1.03" on the screen.
im not very much familier abut this all i hv few questions...
1) Will my phone get well again?
2) Is my mobile in bootloader mode?
3) How to turn it in normal mode again?
thanx !! in advance...
i hope sumone will guide me for sure
Does it show USB v1.0? when connected to the PC? If so then it should be reflashable.
Hello,
I tried to upgrade my SPV M1000 to WM5. I followed the procedure and ran the device in bootloader mode. I put the device on the cradle and it displayed USB and V1.06. Ok sounded good.
I started then the HimaUpgradeUt.exe program on the PC. The problem is HimaUpgradeUt.exe didn't find the mobile device at all. After maybe 1 minute looking to it displayed an error 101 message.
I tried different things : install ActiveSync 3.8, 4.2, 4.5 (no change)
I tried to connect the device with mty and it worked !
I tried to run HimaUpgradeUt.exe with the SPV running WM2003 and it found the device. I didn't try to upgrade in this mode anyway.
Any help is very welcome.
is your machine with win vista also?
as you said that you tryed to install ActiveSync 3.8, 4.2, 4.5, guess its WinXP. if its 2000/WinXP/win2003 then use only 4.2 version of ActiveSync. don't know why but i can only have sucess with that version. check for any security software that may block COM. with ActiveSync-Pocketpc.
that HimaUpgradeUt.exe you use is for your model? as im not an expert on this matter, don't know if your precise phone is a himalaya, maybe thats the prob. ehehhe then maybe not as im not aware of all the brands this peace of tech can became!
do right click on my computer and select manage, goto device manager and see for a mobile entry there, while your pocket is connected in serial/usb boot mode. there must be a windows ce device there for this to happen, and you should, not a must, but try to shut activesynch down while doing this detection with HimaUpgradeUt
Yes I'm running Windows XP Pro SP2. I installed activesync 4.2 again and disabled the firewall. I can see windows detecting the device when I put it on the cradle. But there is still the 101 error message when I try to run the update.
Vista and upgrade
Firstly thanks to marcjero for guiding me to this thread...
secondly... I had no probs at all, syncing my device with vista's WMDC(Windows mobile device center), apparently I tried to flash my device... and yes its an i-mate XDA II, currently running on C_ShekharAKU3.5.R40.P24_public_ROM and want to update to the latest one... apparently, connected my device to my system in bootloader mode... and well since then my system has a prob detecting my device... and I cannot even sync now... when i try to run HimaUpgrade, get the same 101 error code... :-(
any ideas how to get this thing working again?
PS: its seriously frustrating for me
use the "HimaUpgradeUt_noID.exe " instead the "HimaUpgradeUt.exe"
download it HERE!
install the latest Active Sync...version 4.5
Syncing in Vista is no problem but as i said from other thread...i tried but not working...you cannot flash the device except in winxp...
Regards!
jojo
syncing not working either...
xda2jojo said:
you cannot flash the device except in winxp...
jojo
Click to expand...
Click to collapse
The prob is that now a normal sync does not work either... so I cannot synchronize my device with my system at all :-(, any ideas at all... on how to get it to work?
xda2jojo said:
use the "HimaUpgradeUt_noID.exe " instead the "HimaUpgradeUt.exe"
download it HERE!
install the latest Active Sync...version 4.5
Syncing in Vista is no problem but as i said from other thread...i tried but not working...you cannot flash the device except in winxp...
Regards!
jojo
Click to expand...
Click to collapse
I tried both (as 4.5) and HimaUpgradeUt_noID.exe without any success.
daWidoW said:
The prob is that now a normal sync does not work either... so I cannot synchronize my device with my system at all :-(, any ideas at all... on how to get it to work?
Click to expand...
Click to collapse
marcjero said:
I tried both (as 4.5) and HimaUpgradeUt_noID.exe without any success.
Click to expand...
Click to collapse
what OS you are using while flashing and synching? xp? vista?
I'm running XP SP2
About Vista...
Read this thread
Could worth to try.
I tried to flash using my work laptop and it's working now
44% processed, finger are crossed...
Hi.
first, sorry about my english, im from mexico =)
I have a Htc Titan
Rom: NueRom 6152-3pre3
Radio: 3.42.30
Carrier: Iusacell
Im on a Hp dv2000 Windows Vista 32 bits.
The problem that i have is that i cant conect my titan to USB.
When i connect it to the computer charges the battery phone but my computer didnt recognize it.
I tried on diferent computers, win xp and vista and nothing happends.
So i read all the threads about the aGps and QPST. and i coudnt connect my phone to QPST for making the agps trick.
Also i tried to connect to QPST by bluetooth and also nothing happends.
Also i tried all the HTC modem drives and allways i had the same error (10)
can someone help me please
Thx!
sometimes i just unplug and try again over and over, sometimes it takes up to five times, sometimes i even reboot my pc.... try that y arriba mexico ca.....nijos
i tried that and nothing happends =(
when i go to bootloader mode my computer recognize it as an unknow usb divice.
on settings>connection> USB TO PC i tried endable and disable the advance network functionality and nothing happend.
also i tried to relock the phone and put my custom rom (alltel) and also nothing happend..
do i need to change something on the phone?
Please help me ! =)!
Thx.
Did you get dmrouter to start? Have you installed the drivers? I just assume you have followed the first steps of the wiki.
Do you have data and phone, and all functions working? Does IUSAcell even support or have aGPS server? Are you trying to use another carriers aGPS settings?
kdj67f said:
Did you get dmrouter to start? Have you installed the drivers? I just assume you have followed the first steps of the wiki.
Do you have data and phone, and all functions working? Does IUSAcell even support or have aGPS server? Are you trying to use another carriers aGPS settings?
Click to expand...
Click to collapse
Yes, i tried on dmrouter and nothing happend, i have the drivers.
Yes, i have data adn phone, evreything works fine.
Iusacell support aGPS im 100% sure of that.
Do you have any recomendations on how can my computer will recognize my phone?
thx
If dmrouter started successfully, you have the wmodem drivers installed and qpst did not recognize your device and you followed all the directions in the GPS fix thread of your choice, There is nothing I can do for you. Sorry.
Do you have agps server info for iusacell? where is it posted?
kdj67f said:
If dmrouter started successfully, you have the wmodem drivers installed and qpst did not recognize your device and you followed all the directions in the GPS fix thread of your choice, There is nothing I can do for you. Sorry.
Do you have agps server info for iusacell? where is it posted?
Click to expand...
Click to collapse
I found it here
http://www.darkclockers.com/foros/showthread.php?t=7493
sorry but its in spanish, hope it works for you.
anyone can help me with my problem?? thx!!
One trick is to use a different USB port on the computer you are using. Also make sure that the computer has not added it in the Device Manager as an Unknown Device and placed a Yellow Exclamation point besides it. If so delete the item and then reboot.
Also, Im not so sure you really have the drivers installed.
You need to install microsoft activesync in order for your computer to have the right modem drivers.
http://www.microsoft.com/windowsmobile/en-us/help/synchronize/activesync45.mspx
the computer dont recognize my phone, only on bootloader mode.=(
Have you tried to turn off Enable advanced network functionality? When I had issues with my computer seeing the phone, I unchecked this box and active sync would see the phone as well as I now could teather via USB.
Here is where to find Enable advanced network functionality:
Start/Settings/Connections/USB to PC/
Good luck
Re: QPST connection issue
shimele said:
Hi.
first, sorry about my english, im from mexico =)
I have a Htc Titan
Rom: NueRom 6152-3pre3
Radio: 3.42.30
Carrier: Iusacell
Im on a Hp dv2000 Windows Vista 32 bits.
The problem that i have is that i cant conect my titan to USB.
When i connect it to the computer charges the battery phone but my computer didnt recognize it.
I tried on diferent computers, win xp and vista and nothing happends.
So i read all the threads about the aGps and QPST. and i coudnt connect my phone to QPST for making the agps trick.
Also i tried to connect to QPST by bluetooth and also nothing happends.
Also i tried all the HTC modem drives and allways i had the same error (10)
can someone help me please
Thx!
Click to expand...
Click to collapse
Hi Shimele, give this a try. Go to device manager if using XP, should be same for Vista. Look for ports, expand it and you should see something new for your phone. Open up properties for it and then click on Advanced. You should see Port Settings and Advanced at the bottom. By default it may be a high port like com port 9, set it to com port 1 or com port 2. Then run QPST configuration and make sure it's listed in there. You may need to reseat your USB cable after making this change. Hope this helps you
thx all for you answares...
I think phone usb its broke, thats the only logical explanation.
I made my GPS lock in lees than 10 sec. so the usb its not a problem anymore.
I got GPS so fast because i change the radio to: 3.37.75
Thx!
Hola shimele.
I'm also in Mexico (DF) and using the exact config you're using (both laptop and Mogul in Iusacell). I've tried several DCD, Nue and generic roms and they sync with no problems for me.
So, let's start at the begining: you're using Vista, so make sure you've installed the Windows Mobile Device Center patch for Widows mobile. This replaces ActiveSync for Vista computers and can be downloaded here: http://www.microsoft.com/windowsmobile/en-us/help/synchronize/device-center.mspx
Follow the instructions and you should be fine.
If you want us to follow this offline, I'm available, just PM me or send me an e-mail, OK?
Saludos.
Hello @ all. I'm new here and my English is not that good that it should be, so please excuse my mistakes.
I have got a problem I want to install a new ROM on my PDA Phone (XDA Wiza200 G4). I started with this HardSPL. The winwo popped up i pressed "Check DOC", than i got an white screen on my Phone. After this the Tutorial is starting, when I agree to all the questions, the prog should install this SoftSPL, right? But then i am always getting an ERROR, Vista says that this prog is not working normal, and vista is searching for an solution. At the end Vista is closing the Prog and all the Installation is ****.
I am hoping you can understand my Problem and give me an solutuon. Thanks
WinXP is highly recommended,Vista still has problems.You better try it on WinXP.HardSPL will only get installed on WinXP.
Now I've got a problem. Is there any other solution?
Use microsoft "Virtual PC" and install XP ??
Dual boot and install XP?
Sorry posted this in the wrong topic
right click on the ruuupdate.exe file and click properties then click on the compatability tab and click run this program in compatability mode for xp sp2 and make sure the run as administrator tab is ticked too.
Works great for me and i have vista ultimate sp1 and i have had no problem installing roms. I would also enter bootloader mode manually before flashing, i do because certain roms come back with a 260 connection error
Hello. First of all sorry for my English. I have 1 big problem with this phone. One my friend download 1 file and... My phone always lagging and etc. I try to do hard reset and phone not load now, show "samsung" and all, nothing more. I try to download new firmware but oden3 don't see device. I try download drivers, a lot of drivers, odin3 can't find device, and In device manager always need driver "CDC Serial". I try to find drivers from ID code, find mediatech vcom usb driver, install it, but odin3 still don't see my phone. What can I do now?
P.S. I try to install driver on 3 different computers... XP x32 Win7 x64 Win7 x64.
P.S.S If anybody have backup file pls for recovery pls send me!!!!
Somebody pls help me!
Download samsung kies it resovle ur problem