Hello @ all. I'm new here and my English is not that good that it should be, so please excuse my mistakes.
I have got a problem I want to install a new ROM on my PDA Phone (XDA Wiza200 G4). I started with this HardSPL. The winwo popped up i pressed "Check DOC", than i got an white screen on my Phone. After this the Tutorial is starting, when I agree to all the questions, the prog should install this SoftSPL, right? But then i am always getting an ERROR, Vista says that this prog is not working normal, and vista is searching for an solution. At the end Vista is closing the Prog and all the Installation is ****.
I am hoping you can understand my Problem and give me an solutuon. Thanks
WinXP is highly recommended,Vista still has problems.You better try it on WinXP.HardSPL will only get installed on WinXP.
Now I've got a problem. Is there any other solution?
Use microsoft "Virtual PC" and install XP ??
Dual boot and install XP?
Sorry posted this in the wrong topic
right click on the ruuupdate.exe file and click properties then click on the compatability tab and click run this program in compatability mode for xp sp2 and make sure the run as administrator tab is ticked too.
Works great for me and i have vista ultimate sp1 and i have had no problem installing roms. I would also enter bootloader mode manually before flashing, i do because certain roms come back with a 260 connection error
Related
Hi .
I'm planning on upgrading the rom on my MDA Vario II (Dutch).
First I want to unlock the CID. I've got a 1.04 bootloader.
Recently I upgraded to MS Vista (RTM).
When I try to run the patched radio upgrade I always get a ERROR 150.
Yes.. I'm in bootloader mode. It's says IPL-1.01 and HERM300 SPL-1.04.
Could it be Vista??
yes its vista its had something to do with the sync tool in vista they will fix it according to a earlier post next time use the search function there is a thread about Vista and Ruu
I don't think they have released Mobile Device Center for Vista RTM yet... Right now, you see the phone as a drive... Or did you install the beta MDC?
both. I access the phone through the explorer. And I have the beta MDC setup for syncing with outlook etc.
This has been posted a million times, but here we go...upgrading ROMs will not work on Vista until manufactuers update their usb driver code on the installer; until then, use XP/2003. By the way, is that pirated Vista you have?
cant he just upgrade the rom from SD? I have a (legit) final of vista, but havent tested it yet, since i dont see the need for an uprade atm.
I have the Mobile Device Center installed and it all works perfect.
So, if you cannot do it, due to a bug in Vista, maybe the SD works
You have to be careful as if the program crashes during the upgrade of the rom you can brick your device, so I will stay with XP or SD card way to flash a rom.
aquasesh said:
cant he just upgrade the rom from SD? I have a (legit) final of vista, but havent tested it yet, since i dont see the need for an uprade atm.
I have the Mobile Device Center installed and it all works perfect.
So, if you cannot do it, due to a bug in Vista, maybe the SD works
Click to expand...
Click to collapse
I have Vista RTM and I confirm that the MDC is not stable enough for all these update work... it failed for me a few times and I'm lucky with my 8525 and it is still working OK after reflashing it with another PC (XP).
Aha. That explains that.
I've just managed to get my JasJar stuck in bootloader mode after trying many times to upgrade the ROM. This, despite the upgrade tools telling me there are errors.
Curses.
Apparently people don't know how to read what I posted...
ITS SAFE
I already flashed my Universal with Vista
-First need to install MDC, could be beta from MSDN, because it will update.(still don't know why it's not included on RTM)
-Run compability mode WIN XPSP2
-Run as Adm
thats it...
ISN'T Safe!
phamoui said:
I already flashed my Universal with Vista
-First need to install MDC, could be beta from MSDN, because it will update.(still don't know why it's not included on RTM)
-Run compability mode WIN XPSP2
-Run as Adm
thats it...
Click to expand...
Click to collapse
I am testing vista since CTP (Community Technology Preview), then RC1 (Release Candidate), RC2, now RTM (Ready To Market) as Technet Plus Member.
I can't say is safe to use it even for day by day syncing, I have always unpredictable results; my TyTn sometimes is a Smartphone, sometimes Pocket PC, syncing? may be, every time you connect you have to guess...
This happens because Windows Mobile Device Center (WMDC not included in Vista RTM) is still in BETA 3 stage, not even RC!
LESSON LEARNED
If you plan to install VISTA and you are a WM expert or just business user DON'T upgrade your XP, just install VISTA on a second HD and use your XP to solve the VISTA problems. Even Virtual PC 2007 (good to have with XP installed to have available some appz still not VISTA upgraded) couldn't use USB port, so no way to have a safe "old style" USB connection
Isn't VISTA fault, is a new tecnologies-early adopters problem
One of the most common source of problems with vista are USB drivers (no way in my knowledge to have a simple webcam working with VISTA)
This has great importance when you are doing something "uncommon" and "mission critical" like flashing something!
how possible is to do the upgrade thing over windows vista?
i did had same prob with HimaUpgradeUt not detecting pocket when i tryed to upgrade with beta version of activesynch 4.5 on the previous windows xp.... right now i use my syster's xp machine (during the idle time, of course ) to do this operations.. but its prety anoying!
is there any trick? or HimaUpgradeUt will be updated for vista compatibility?
thanks alot for the amazing forum, the amazing help!
Do you think I have the same issue ?
http://forum.xda-developers.com/showthread.php?t=307828
яι¢αя∂σ said:
how possible is to do the upgrade thing over windows vista?
i did had same prob with HimaUpgradeUt not detecting pocket when i tryed to upgrade with beta version of activesynch 4.5 on the previous windows xp.... right now i use my syster's xp machine (during the idle time, of course ) to do this operations.. but its prety anoying!
is there any trick? or HimaUpgradeUt will be updated for vista compatibility?
thanks alot for the amazing forum, the amazing help!
Click to expand...
Click to collapse
i tried but still not working on vista...
guess must be a thing from some win vista api! now i'm back to WinXP because i use lots of other progs for mobile that not work properly under winVista...
marcjero:
is your machine with win vista also?
as you said that you tryed to install ActiveSync 3.8, 4.2, 4.5, guess its WinXP. if its 2000/WinXP/win2003 then use only 4.2 version of ActiveSync. don't know why but i can only have sucess with that version. check for any security software that may block COM. with ActiveSync-Pocketpc.
that HimaUpgradeUt.exe you use is for your model? as im not an expert on this matter, don't know if your precise phone is a himalaya, maybe thats the prob. ehehhe then maybe not as im not aware of all the brands this peace of tech can became!
do right click on my computer and select manage, goto device manager and see for a mobile entry there, while your pocket is connected in serial boot mode. there must be a windows ce device there for this to happen, and you should, not a must, but try to shut activesynch down while doing this detection with HimaUpgradeUt
edit: but hey, nice for the replys! thanks!
sorry but i have to locked this thread to avoid redundant thread...
please continue HERE!
Thanks!
jojo
Hello,
I tried to upgrade my SPV M1000 to WM5. I followed the procedure and ran the device in bootloader mode. I put the device on the cradle and it displayed USB and V1.06. Ok sounded good.
I started then the HimaUpgradeUt.exe program on the PC. The problem is HimaUpgradeUt.exe didn't find the mobile device at all. After maybe 1 minute looking to it displayed an error 101 message.
I tried different things : install ActiveSync 3.8, 4.2, 4.5 (no change)
I tried to connect the device with mty and it worked !
I tried to run HimaUpgradeUt.exe with the SPV running WM2003 and it found the device. I didn't try to upgrade in this mode anyway.
Any help is very welcome.
is your machine with win vista also?
as you said that you tryed to install ActiveSync 3.8, 4.2, 4.5, guess its WinXP. if its 2000/WinXP/win2003 then use only 4.2 version of ActiveSync. don't know why but i can only have sucess with that version. check for any security software that may block COM. with ActiveSync-Pocketpc.
that HimaUpgradeUt.exe you use is for your model? as im not an expert on this matter, don't know if your precise phone is a himalaya, maybe thats the prob. ehehhe then maybe not as im not aware of all the brands this peace of tech can became!
do right click on my computer and select manage, goto device manager and see for a mobile entry there, while your pocket is connected in serial/usb boot mode. there must be a windows ce device there for this to happen, and you should, not a must, but try to shut activesynch down while doing this detection with HimaUpgradeUt
Yes I'm running Windows XP Pro SP2. I installed activesync 4.2 again and disabled the firewall. I can see windows detecting the device when I put it on the cradle. But there is still the 101 error message when I try to run the update.
Vista and upgrade
Firstly thanks to marcjero for guiding me to this thread...
secondly... I had no probs at all, syncing my device with vista's WMDC(Windows mobile device center), apparently I tried to flash my device... and yes its an i-mate XDA II, currently running on C_ShekharAKU3.5.R40.P24_public_ROM and want to update to the latest one... apparently, connected my device to my system in bootloader mode... and well since then my system has a prob detecting my device... and I cannot even sync now... when i try to run HimaUpgrade, get the same 101 error code... :-(
any ideas how to get this thing working again?
PS: its seriously frustrating for me
use the "HimaUpgradeUt_noID.exe " instead the "HimaUpgradeUt.exe"
download it HERE!
install the latest Active Sync...version 4.5
Syncing in Vista is no problem but as i said from other thread...i tried but not working...you cannot flash the device except in winxp...
Regards!
jojo
syncing not working either...
xda2jojo said:
you cannot flash the device except in winxp...
jojo
Click to expand...
Click to collapse
The prob is that now a normal sync does not work either... so I cannot synchronize my device with my system at all :-(, any ideas at all... on how to get it to work?
xda2jojo said:
use the "HimaUpgradeUt_noID.exe " instead the "HimaUpgradeUt.exe"
download it HERE!
install the latest Active Sync...version 4.5
Syncing in Vista is no problem but as i said from other thread...i tried but not working...you cannot flash the device except in winxp...
Regards!
jojo
Click to expand...
Click to collapse
I tried both (as 4.5) and HimaUpgradeUt_noID.exe without any success.
daWidoW said:
The prob is that now a normal sync does not work either... so I cannot synchronize my device with my system at all :-(, any ideas at all... on how to get it to work?
Click to expand...
Click to collapse
marcjero said:
I tried both (as 4.5) and HimaUpgradeUt_noID.exe without any success.
Click to expand...
Click to collapse
what OS you are using while flashing and synching? xp? vista?
I'm running XP SP2
About Vista...
Read this thread
Could worth to try.
I tried to flash using my work laptop and it's working now
44% processed, finger are crossed...
Please HELP...
You should be fine to upgrade. I've upgraded my Hermes on Vista and it went perfectly fine (unless it's different for the Atom which i doubt it would be). Just connect the device to your computer, have your device parteredup with the computer, and run the RUU.
Use a virtual machine software and install XP on it.
I don´t use vista but many persons stated that it isn´t working on it right now, but guess it depends on what software or rom for the upgrade.
cheers
http://trinityguides.info/index.php?option=com_content&task=view&id=20&Itemid=66
I bricked my 6828 on vista
Tolay said:
I bricked my 6828 on vista
Click to expand...
Click to collapse
I don't see how, as the main problem with flashing a device (the Atom/HP6800 anyway) is that it can't properly communicate with the PDA due to a driver issue. I've tried a Vista driver listed on this forum somewhere, but didn't really help the problem too much.. Your best bet would be to grab Virtual PC and setup an XP install under it.
On Vista & WinXP same error: Download target not found! after a few minutes.
My device: O2 Xda Atom.
OS: Vista and WinXP
hi...im a new owner to atom exec and i want to change my ROM but im having troubles with it...whenever i start the update process,after a while it will pop up a message box saying that "no download target found!"...what does this mean???hopefully someone here can guide me through it...
anybody can help me please??thanks...
before this, im also had the same problem to flash my o2. exac, u need window xp platform (sp1,2,3).. i already try on vista and seven but the result is the same like yours.hope that help
noriest said:
before this, im also had the same problem to flash my o2. exac, u need window xp platform (sp1,2,3).. i already try on vista and seven but the result is the same like yours.hope that help
Click to expand...
Click to collapse
Exactly, I noticed another post where the same issue was occurring.
To bypass this I booted up an XP virtual machine, installed ActiveSync 4.1, connected the phone to the VM (virtual machine) and then ran the update from there.
So far so good.
how to upgrade atom exec rom using mini sd card
i was upgraded my rom with active sync, but something "unwanted" happen, my atom screen just showing windows screen, but it won't opened the menu. please...tell me how to install a new one with mini sd card step by step