Hi
Im hopeing someone can help me I know this issue has probably been discussed loads of times and im a muppet for doing it, I was looking at different ROM's for my Orange M3100 and thought I would go for the IMATE JASJAM ROM so I could get MSN messenger .... I unfortunatly selected the TELSTRA 1.06 Bootloader ROM and downloaded instead of the 1.04 ( I should have read the posts on this ROM before!). Now I am stuck in bootloader 1.06 and as I have read the only way to get back to 1.04 is to flash with a ROM that is the same as my carrier (Orange UK).... the only Orange ROM is the Romanian one thats just been put on the WIKI, I have tried with this but its coming up Vendor ID error... if anyone can help or tell me how I can go back to 1.04 id be grateful? if not do I just have to wait until orange UK bring out a ROM with bootloader 1.06 ????
Thanks a lot ! James UK
Same problem with Cingular bootloader 1.06
I've the same problem with Cingular 1.34 bootloader 1.06, I try to downgrade with same bios CID (CWS__001 as I read on this forum) to bootloader 1.06 but I receive an error "WRONG VENDER ID" (also if i leave connected my PDA and I restart RUU utility it give me the same error)
I've also tried to install another vendor bios with bootloader 1.06 as suggested but I receive the same error message!!!
Emanuele
Unfortunately, you're stuck unless you either a) wait for a bootloader for your CID or b) pay the $38 to do the super-CID unlock. There's a thread on that stickied, so if you decide to do it, help them out by doing the usb capture.
Thanks... I have already unlocked the device with IMEI-Check.co.uk do you mean this? If I have unlocked it then do you think I should run IMEI check again on the device and it may unlock the CID ? cheers, James
If you run the imei tool again (with the latest version of theire software) it will reverse your bootloader to 1.04 and make your device super CID
Related
Japanese ROM from DoCoMo hTc Z has been uploaded to XDA-Developers FTP and added to the Hermes wiki, you can find it under the Available Original Shipped ROM Versions.
Notes on this ROM:
ROM Version: 1.23.731.2 06/24/06
Radio Version: 1.06.00.10
Bootloader: 1.04
Language: JPN (Japanese)
CID: DOCOM801
As you can see this is nothing new, but I guess it will be useful for people with this CID to be able to downgrade to bootloader 1.04.
Enjoy
Hi pof,
Thanks for that. I tried this to flash my X01HT after unlocking it with imei-check but with no luck. RUU went successufully till the last screen and I hit the upgrade but it returned an error saying something like this RUU cannot be used for the device. Bootloader is now 1.04 and the device should be SuperCID with imei-check. The only thing I can think of is that I upgraded the radio to your 1.2. Would that screw SuperCID? I appreciate your advice in advance.
Thanks,
harryk
harryk1372: If you are in 1.04 bootloader just run the upgrade utility again without disconnecting the device or start the upgrade in bootloader mode to bypass CID checking.
If it is really SuperCID then you shouldn't have seen this error.
Hi pof,
Thanks very much for getting back to me so quickly.
I ran the upgrade in the bootloader mode. I thought that I don't have to run it twice if the device is already at the SuperCID state and didn't run the update twice. I'll try it again when the device is fully charged as the battery is now down to like 30%.
I'll post the result again when I am done. Thanks again for your prompt advice. You're the man and I really appreciate your efforts taking us thus far in cracking Hermes.
Regards,
harryk
Hi pof,
The device looks like it was not in the SuperCID state and RUU went fine with the second run with no error. However, the upgrade failed when it hit exactly 47% no matter how many times I tried it. Lucky that I did not brick my device but of course it seemed to lack some of the components and it did not even have the Connections setting to set up the Internet access. Also, AutoRun and cabs in the ExtRom didn't take any effect either although the cab files were there.
I decided to flash the TyTN ROM instead and that was successful. That is fine as I only use Japanese occasionally and I didn't really want the Japanese MUI so I will keep it as is. Perhaps I will tweak it a little to be able to use Japanese with loading the Chinese nls, Japanese font, Japanese IME and so forth just like I did with my Universal.
Thanks again.
harryk
Does anyone succeed in flushing Docomo ROM to X01HT?
After unlocking my X01HT,
the annoying message http://forum.xda-developers.com/showthread.php?t=282073&p=1048193
appears again and again, even if I use SB_USIM.
Especially when I write SMS message, it will disturb me over and over.
I try to flush the Docomo ROM to my X01HT and hope to receive your help.
s2k7 said:
Does anyone succeed in flushing Docomo ROM to X01HT?
After unlocking my X01HT,
the annoying message http://forum.xda-developers.com/showthread.php?t=282073&p=1048193
appears again and again, even if I use SB_USIM.
Especially when I write SMS message, it will disturb me over and over.
I try to flush the Docomo ROM to my X01HT and hope to receive your help.
Click to expand...
Click to collapse
fyi...
http://forum.xda-developers.com/showthread.php?t=283177&page=2&highlight=qtotter
I always downgrade my JASJAM using I-Mate shipped ROM
s2k7 said:
Does anyone succeed in flushing Docomo ROM to X01HT?
After unlocking my X01HT,
the annoying message http://forum.xda-developers.com/showthread.php?t=282073&p=1048193
appears again and again, even if I use SB_USIM.
Especially when I write SMS message, it will disturb me over and over.
I try to flush the Docomo ROM to my X01HT and hope to receive your help.
Click to expand...
Click to collapse
i use the docomo rom on my x01ht. it's ok. i have no problem with it at all.
a friend of mine uses a sim-unlocked x01ht (/w the original s/b rom) with sb_usim, but she does not get such a msg at all. do you use a s/b sim?? if yes, i suppsoe you did something wrong...
X01HT Unlocking Problem
I've got this X01HT a few days ago from S/B shop but when I tried unlocking it the result was no good using my cable. I read from other site that X01HT released from December 2006 cannot be unlocked. Please give me some clarifications on this and also, is FLASHING on lower rom version even in english version can resolve the problem...? Your response will so much appreciated.
Thanks in advance.
At the moment it's not possible to unlock X01HT devices wich where bought after 12/1/2006 and have bootloader version 1.09 and RadioROM version 1.14.0.10! Please be patient.
To the experts, I need some advice. I intend to get a X01HT, already unlocked and flashed with the dopod 838 pro firmware. However, I intend to flash back the Japanese shipped rom :
RUU_HER_DoCoMo_1.23.731.2_1.06.00.10_JPN_SHIP.zip
What are the requirements esp where :
Bootloader (SPL)
Latest Radio Bootloader (HTC_BOOT)
Or since its unlocked, do I just go to the bootloader mode and flash direct? Any side effects if I do so, since its changing from an english rom of another clone (Dopod 838 pro, WM6)?
I am not even sure if the RUU_HER_DoCoMo_1.23.731.2_1.06.00.10_JPN_SHIP.zip rom is WM5/6. Please advice, thanks..
Hi
I tried to unlock my orange m3100 (swiss) SPL 1.04. When I run the MaUpgrade I get the ERROR message 120 Country ID mismatch and the program quite / radio rom version remains at 1.06.00.00.
Please help me - thanks
Surely your running the MaUpgrade_noID.exe program??
S.K.
Which bootloader do you have?
[edit]Sorry-I just saw you listed 1.04 in your original post[/edit]
Run the software when your fone is under the tri-color screen mode, rather than wm 5.0
Hi, I'm a newbie here.
I have great interest for purhcasing Softbank X01HT.
At the beginning, I proposed to flash the rom to English verison.
But recently, I see some messages that we cannot downgrade the bootloader 1.09 to 1.04 anymore.
Therefore, I would like to know ........
Is anyone working on the downgrade method for bootloader 1.09 ?
If so, what's the status now ?
Can I expect there will be a new solution coming soon ?
So many questions ..... hope someone can answer me. Thx !
1.09 to 1.04
ok, what I understood is :
1- you can download from 1.09 to 1.04.
see :
Bootloader
The bootloader is the place where you can change the low-level software parameters and some hardware parameters of the Hermes, change and read the ROM and provides information about it.
The bootloader is invoked by pressing down both the POWER button and SIDE OK together and using the stylus at the same time to press the RESET button at the bottom.
The bootloader version is shown for a short amount of time when booting the device. You'll see "SPL-1.0X"
Versions
* 1.04
There is a bug in bootloader 1.04 wich allows you to flash any ROM without a CID check. You have to be in bootloader mode to use this bug.
It's possible to upgrade the RadioROM. You can even flash a patched RadioROM wich is needed to unlock your device.
* 1.06
The bug from version 1.04 is fixed. Without downgrading to a Shipped ROM with bootloader 1.04 that matches your CID it's not possible to flash a ROM with a different CID.
The RadioROM can't be upgraded. You have to downgrade to bootloader 1.04 to unlock your device.
* 1.09
You can't downgrade to bootloader 1.04 by flashing a Shipped ROM. However imei-check.co.uk is able to downgrade the bootloader.
There was a solution posted on this forum, but it was stolen from imei-check and was removed. If you are not willing to pay you have to wait until another solution is developed.
The RadioROM can't be upgraded. You have to downgrade to bootloader 1.04 to unlock your device.
"There was a solution posted on this forum", the remaining of it is here, what can be shown :
1. Go to Google, search for DownGrade_SPL.rar (rq : does not work anymore)
2. Connect your tytn to PC and wait until activesync completed.
3. Run M3100v3cUnlock.exe. Once you see checking device.... in DOS box and whilte screen on your tytn, close the program (Dos box) immedaitely.
4. Run ROMUpgradeUt.exe and follow the japanese wizard to complete the boot loader downgrade.
5. Reboot your tytn and then put it into bootloader mode agian, you should see SPL-1.04. Great!
6. Download pof's HTC_Hermes_SIM_Unlock_v2a from
ftp://xda:[email protected]_v2a.zip
7. Flash the patched radio rom 1.16, then Reboot.
8. Copy HERM_Unlock_v2a.exe a small PPC app pof wrote into your TYTN memory.
9. Open File Explorer, run HERM_Unlock_v2a.exe on your TYTN and wait about 1 minute until it shows up a completed message. Reboot again!
10. Download mtty.exe from
http://wiki.xda-developers.com/uploads/mtty.exe
11. Disable ActiveSync, and then run mtty.exe, choose usb connection; Enter. You should see USB> prompt. Type in: info 2 . When you see 00000000 or SuperCID string. You are safe and ready to upgrade to the latest TYTN 1.35 Rom with bootloader 1.09.
2- BUT the trick is that it is impossible to SIM unlock even if you downgrade Right now there is no solution, and I don't know when or if there will be. I hope there will be one indeed...
3- you can still change the language, but it is limited in two ways :
for the good news :
http://forum.xda-developers.com/showthread.php?t=281617
for the bad news :
http://forum.xda-developers.com/showthread.php?t=284765
and a good news in process:
http://forum.xda-developers.com/showthread.php?t=284765&page=5
but I don't get exactly how it works...
For more information look around the board, or I will try to retrieve the info.
take care,
I'm looking forward buying the same device
dam
alexnalexn said:
Is anyone working on the downgrade method for bootloader 1.09 ?
If so, what's the status now ?
Click to expand...
Click to collapse
As dam has explained, some time ago we published a method to downgrade the bootloader to 1.04 but this method used imei-check copyrighted files and had to be removed from the forum, some people downloaded the files and it has appeared on chinese and russian sites after we removed it from XDA-Developers, but this method violates imei-check copyright and should not be used, if you are a legal person and want to downgrade the bootloader now you should BUY imei-check unlocker.
I started working on a project to Downgrade SPL by modifying HaRET tool with the help of some other people, we managed to put IPL on ram and jump to it, but we still haven't managed to do it with SPL (the device hangs when copying to memory). Now I'm quite busy and can't dedicate all the time I need for this, but will try to finish it once I know how to copy the SPL correctly... if someone has experience in this and want to help, let me know and I can send you the source of modified haret, but it's still a lot to do... once this is finished there will be a free method to downgrade bootloader, now there isn't.
When bootloader is downgraded to 1.04 you can change the ROM because it has a bug where the CID is not checked if you run the RUU twice. You can also use HERMES SIM & CID unlocker when you have bootloader 1.04. But on softbank x01ht version sold after 1 December 2006 it is not possible to SIM & CID unlock even if you have bootloader 1.04 because the radio is read only and can't be patched. AFAIK no one has knowledge on how softbank did this, and there is no known method to circumvent this yet.
I tried to unlock Hermes Orange SPV M3100 withe the latest unlocker v3a but couldn't unlock...After run auto unlock v3a, and run hermes unlock at the end, it says unlock successfuly but the phone still asks to enter unlocking code..i've been reading the hernes unlock threads but could find the solution to unlock it..this hermes has ipl 1.01 and spl 1.40 0ipro...anyone knows the way to unlock please help..thanks
sorry..problem solved, phone's unlocked...don't know what happened first but after hard reset phone, insert original sim and repeat procedure, phone is unlocked after that.
hi, i have the same problem. When i m flashing with Auto_unlock_3a_pof , i must insert original sim (orange) or no?
thanks
hi, I had the same problem. the unlocker went thru the procedure as successful, but was still locked to orange and asked for the code.
I had ran it without any sim.
after I did a hard reset and put in an orange sim, then ran it. it was ok.
unlocked. thanks.
you gotta give LOTS of details about your problem. there are literally hundreds of possibilities if you give us no details about what you did, what went wrong, during what stage... have u set up correctly, did you flash hardspl, was your battery full, did you read instructions well or just skim and jump ahead?
i hav same problem...."--------------------------------------------------------------------------------
I tried to unlock Hermes Orange SPV M3100 withe the latest unlocker v3a but couldn't unlock...After run auto unlock v3a, and run hermes unlock at the end, it says unlock successfuly but the phone still asks to enter unlocking code..i've been reading the hernes unlock threads but could find the solution to unlock it..this hermes has ipl 1.01 and spl 1.40 0ipro...anyone knows the way to unlock please help..thanks""" plz help me
I Have read allot of data, unbrick tutorials and upgrades suggestions...
but I Still haven't found what is the correct upgrade stages.
As far as I have read from the unbrick suggestions, I've reached to the following order:
1) Upgrading SPL (Enabling KITL)
2) Unlocking
3) Upgrading radio
4) Upgrading Windows
Can someone confirm or recommend/add other steps ?
During the upgrade steps, will the HERMES be usable ?
Unlock first THEN hard spl.
DONT mess with your radio if it works fine, as this is part that can COMPLETELY brick your phone(you may be able to use as a PDA but not gonna be a phone EVER again.)
Load an os(either a stock one OR one of the cooked roms our TOP chefs cook up.), most come as OS only, no radio.
Hope this helps.... Cheers
It is useless for me, I cannot unlock the phone, due to different locking technique.
there are few posts about a locked Jasjam, with no olutions.
all the unlocking process went well, 3 times...
after the unlock process, when I insert the sim, it connects to the network, (indicated with 5 lines) and after about 5 seconds, it disconnect and says :
"The system detected an invalid SIM card"
and asks for unlock code.
now I have the following versions:
IPL 1.01
SPL 1.40.Olipro
Radio 1.16
any ideas ?
The Solution
To unlock Cellcom (Israel) JASJAM, As weird as it sounds, you should disable/deactivate/uninstall/whatever the EYRON Multi language support, which comes pre-installed.
I'll let the experts explain it.
I Dont know if it works for Orange-il Tytn too.
please consider note this in unlock guide ?
Now, which version of HARD-SPL with KITL should I Install... (Link will be helpful)
Please note that I Only Unlock the SIM, and not SuperCID, the .BAT file of the unlocker says:
"CID Unlock: will make your phone SuperCID forever, don't check this if you are unsure. HardSPL will do same effect without loosing warranty."
Olipro ver 7(Hard SPL) This is considered the best for the layman, if you want to develope roms/ programs then you should use ver 9. However, ver. 9 does throw up an error after flashing. There is no problem and olipro said he'd get around to fixing it, BUT.......
Hope this helps...
ultramag69 said:
Olipro ver 7(Hard SPL) This is considered the best for the layman, if you want to develope roms/ programs then you should use ver 9. However, ver. 9 does throw up an error after flashing. There is no problem and olipro said he'd get around to fixing it, BUT.......
Hope this helps...
Click to expand...
Click to collapse
I have upgraded to Olipro V7
When I Boot into bootloader, I see:
IPL-1.04
SPL-2.10.Olipro
But I Still not get any sign of KITL according to this threat (Step 5).
The Device is booting normally, as if I'm not holding any bottons.
How can I check if KITL enabled ?
Do I need KITL while using OLIPRO V7 ?
Orenk,
Have you read the Mr Vanx guides or the wiki? Here are the links:
http://www.mrvanx.org/cms/
http://wiki.xda-developers.com/
WB