I feel like a total IDIOT !!!
I was messing around with my TyTn trying to unlock the ext rom.....
I installed fit4cat 1.0 checked it out...didn't do anything with it.
My TyTn started acting a little strange..so I did a hard reset.
When it reboot during the customization process it tells me:
\Extended_ROM\MT_ShortcutMMS-Hermes.CAB does not exist.....
then it freezes!!!!!
What did I do !!! I'm a fool!
Can someone help me out?
I just want to reset it and get the ext rom installed..
btw..i have bootloader 1.14
ok...i kind of got things going again.....!
I still get the message about the missing .cab file!!
I can now access the ext rom folder.....now the question is how do I instal .cab files for the ext rom?
I downloaded the appropriate ext rom version for my device and it contains a bunch of .cab files, one of them being the missing file
How do I get it in there...do I simply instal it like a standrd .cab file?
Does it need to be installed in the ext rom ?
hahaha your not the only one... what you need to do is visit the wiki here and download the appropriate ExtROM for your device and... use fid4cat to unhide and unlock the EtxROM and simpy copy the missing file back there... re lock the ROM using fid4cat and hard reset it....
walshieau said:
hahaha your not the only one... what you need to do is visit the wiki here and download the appropriate ExtROM for your device and... use fid4cat to unhide and unlock the EtxROM and simpy copy the missing file back there... re lock the ROM using fid4cat and hard reset it....
Click to expand...
Click to collapse
ok.....where do you copy the missing files? at the root level of the ExtRom folder?
There's other folders in there:
Program Files
WMDRM
I don't see any other .cab files in the ExtRom folder of my device...is that normal? Should I copy all the ExtRom file I downloaded since I have none in the device ExtRom folder?
if you can see the extrom and there are no cab files inside it then you have somehow formatted your EtxROM, you need to copy all files from the relevant downloaded ExtROM onto your PDA in the ExtROM folder and relock the etxROM
walshieau said:
if you can see the extrom and there are no cab files inside it then you have somehow formatted your EtxROM, you need to copy all files from the relevant downloaded ExtROM onto your PDA in the ExtROM folder and relock the etxROM
Click to expand...
Click to collapse
I did it...followed you instructions...and everything is working again !!!
I even have the video phone enabled now !!!!!!
YOU ARE THE MAN....!!! thanks for your help!
no problems... in future take a backup of everything before you do anything i have run into your situation many times hahahahaha....
Related
I have been reading lots of posts on the forum and got so far but now I'm stuck.
I have an XDAII and have managed to unlock and unhide the extended rom. now I can access the extended rom while XDAII is in the cradle.
I understand how I can add cab files to it and will be using the configcreator tool to edit the config.txt file.
The problem I have is; all the pockekpc software I have, is on my computer and I have only ever installed it through activesync the normal or official way. When ever I have tried to put the files directly on my phone and click on them I always get the messeage this is not a valid pocket pc application..... or something like that.
So how do I convert the software files I have on my computer to cab files so I can include them in the extended rom? :shock: ? :?:
To most of you guys this must seem like a nuby question sorry :roll: , but I can't seem to find the answer on the forum.....
Is there a tool I can use or a program that I can use to make useable cab files?
Also just a though when I install programs via activesync does my computer convert the files to cabfiles and then automatically transfer them to my device? if so can I somehow copy the cabfiles from the temporary location on my computer :?:
A step by step guide would be helpfull but any help would be appreciated :?
Thanks in advance
Daz
Some 'high-end' software will leave a copy of their cab files on a specific directory (i.e. you have a choice of choosing). Those you can just go to the directory and copy it. If you do not know what I'm talking here, nevermind
Anyway, for normal simple software, they will most probably extract themselves to temporary directory. Example
C:\Documents and Settings\'yourWindowsUserName'\Local Settings\Temp\
where 'yourWindowsUserName' is your username for the PC. My guess would be, try to search for *.cab files in your temp directory (i.e. as the above dir) before you install your software. THEN, start your software installation, and do a search again on the 1st setup screen, see if you are lucky And try to do another search after you're done with the setup.
Hope this helps.
Thanks for that I'll have a go.
Daz
I managed to edit my extended rom! 8)
I was able to add the cab files from tom tom navigator 3 and it installs them perfectly after a hard reset!
The only issue I have, when I run Tom tom for the first time after a hard reset I have to keep entering the activation code. Not really a major issue more of a pain.
Wonder if anyone knows how to get it to enter the activation code automatically :?: Bat file or something :?:
This sites really helped me with my tinkering I think its about time to donate
Thanks for all the help guys
Daz
adobe reader
anyone know how to extract the cabfiles from the adobe reader pocketpc exe file?
I've tryed to get them from
my pc's temp file when installing via activesync but the files are not cab files?
any Ideas?
DAZ
adobe reader
anyone know how to extract the cabfiles from the adobe reader pocketpc exe file?
I've tryed to get them from
my pc's temp file when installing via activesync but the files are not cab files?
any Ideas?
DAZ
Re: adobe reader
doortodoorsalesman said:
anyone know how to extract the cabfiles from the adobe reader pocketpc exe file?
I've tryed to get them from
my pc's temp file when installing via activesync but the files are not cab files?
any Ideas?
DAZ
Click to expand...
Click to collapse
Hi :
Here after what I do with succes :
When installing the application from ActSync, you must select "Storage Card" instead deffault location to install.
Then, you have to cancel the installation process before the progress bar on your PPC's screen ends.
A dialog box will ask if you're sure to abort the process.
At this stage, you go to storage card throught your PC Explorer, and you'll find the cab file there.
You save it away.
This cab file on the storaqe card will be automatically removed when you confirm that you really want cancel the installation process on the PPC's screen.
Or...
Go to c:\Program Files\Microsoft ActiveSync folder in your desktop and you can find there more cabs. Or simply find all the *.cab files on your HDD and you'll be surprised.
Thanks for this I will check out both methods
Does anyone know what the best freeware tool for modifying the cabfile is? and where I can download it :?:
Thanks for the help
DAZ
...
I think,that everyone here knows only WinCE Cab Manager from OCP Software. But this is commercial,but...on internet is everything...
Hi!
I have tried to research the subject. Have flashed a new rom with bootloader 1.04, made unit supercid, used heremes tweak to unhide, unlock. But I can't delete any of the files in extrom with the standard file explorer. What am I missing here?
okay,,, I did that once long ago, its shall we say, not recomended.
I did this a while ago so my mind is a little sketchy on exactly how I go t it done. I used Resco File Explorer but I had to unhide the 'Recycle' bin to actually delete the files as they were going in there.
I have deleted all the files in my Ext Rom and used the space to install TomTom etc. Not come across any problems yet.
Dear friend
I want to add some CABs files to ExtROM Directory of new ROM, then flash my device to automatically install my favorites cab file when hardresetting. (I use TNT 4 ROM)
but the question is that how can i change the installation Path of CABs file that are in ExtROM ?
for example there are files in ExtRom :
1.cab
2.cab
3.cab
4.cab
...
after Flashing my device and hardresetting, all of those files putted & installed in main memory, i want to install them in Storage card automatically after hardrest.
Thanks for ur helping
ebaskar said:
Dear friend
I want to add some CABs files to ExtROM Directory of new ROM, then flash my device to automatically install my favorites cab file when hardresetting. (I use TNT 4 ROM)
but the question is that how can i change the installation Path of CABs file that are in ExtROM ?
for example there are files in ExtRom :
1.cab
2.cab
3.cab
4.cab
...
after Flashing my device and hardresetting, all of those files putted & installed in main memory, i want to install them in Storage card automatically after hardrest.
Thanks for ur helping
Click to expand...
Click to collapse
nobody knowing?
I guys. I kinda need some help. I flashed Transformer 1.0 and some files are missing.
I reaaaaaally don't wanna flash it again so can you please post those files for me? or just teach me a way to retrieve them from the rom? (loved to do that)
I used the exes from the kitchen rom soft from the forum and got access to the os.nb files but still the files I need aren't there.
I guess maybe they're on the nbf file from pdaviet's temp rom but couldn't access the files inside it.
The files are the exes for:
\windows\timewizard.exe
msn live(pmsnlive something .exe)
the terminal exe
zip
Could you mail them or post them on rapidshare? I can put a full path and name here from the files here...
Thanks in advance
got the timewizard.exe around the forum
but still some files missing
did you a hard reset?
Yes I did. when it prompted me for the calibration.
I did it again and everything's fine now!
Thanks
Dear Friends,
I want to cook/Edit ROM with NeoKit tool. I want to add some CABs file to ROM and when I Hard reset My PPC I want These CABs files to be installed Automatically in my SD card. Is it possible?
Thanks
Salam
Salam mohandes
moshkelet Chiye?
Adel
ebaskar said:
Dear Friends,
I want to cook/Edit ROM with NeoKit tool. I want to add some CABs file to ROM and when I Hard reset My PPC I want These CABs files to be installed Automatically in my SD card. Is it possible?
Thanks
Click to expand...
Click to collapse
Use the UC config tab and add your cab files there i think from memory and it makes the config file for you
wapvirus said:
Use the UC config tab and add your cab files there i think from memory and it makes the config file for you
Click to expand...
Click to collapse
I want to put both CABs file and installed CABs in my storage card. for example when I Hard Reset my PPC, it should read CABs from Storage card and install them into Storagecard/programFiles folder automatically. Is it possible?
ebaskar said:
I want to put both CABs file and installed CABs in my storage card. for example when I Hard Reset my PPC, it should read CABs from Storage card and install them into Storagecard/programFiles folder automatically. Is it possible?
Click to expand...
Click to collapse
I think i understand what you are asking yes it's possible because the The cabs that get installed are in a special folder and only the cab files in the UC config file will be installed