Related
Hi,
I recently had a power cut (yes, a lights off power cut!) that killed my PC half wat through installing the Cingular English CWS__001 1.34.502.1 09/21/06 ?? 1.16.00.00 32.53.7018.01H 14955.2.3.0 ROM onto my SPV 3100.
Now SPV 3100 will boot to the ROM I was running prior to the upgrade but I can't use the telephone. I'm also not able to rerun the upgrade as it got far enough through the process to upgrade my bootloader to 1.06 - therefor rendering me unable to load another ROM.
Before the crash I was using the Imate ROM as below and M3100 was sim unlocked and running on o2 3G
i-mate English CDL__001 1.20.305.3 07/21/06 1.20.305.104 1.07.03.10 32.41.7010.02H 14955.2.3.0 1.04
Please help.
Thanks
If your device is still working ok as a PDA then hopefully it just screwed up the radio update of your device.
Try reflashing the Radio only
Look Here
http://wiki.xda-developers.com/index.php?pagename=Hermes_ExtractedRadioRoms
Post back with results
Regards
S.K
EDIT: Sorry only works on 1.04 bootloader only. Afraid your gonna have to wait for Pof to come up with a 1.06-1.04 workaround
Hi S.K,
Thanks for the info. I have now tried installing the HERM_1.20.31.10_type2_radio_fixed upgrade but unfortunately the radio upgarde crashes also. It all seams to go well, (after using MaUpgradeUt_noID.exe twice) the phone says "Upgrade Radio Stack Please wait" and the progress bar appears on the PC but then after 10 mins I get an ERROR 114: RADIO ROM UPDATE ERROR.
Do you think this might be becuase the last upgarde partly installed bootloader 1.06?
Any other suggestions - I'm desperate to get the hpone on M3100 working again.
Thanks
Read here:
http://wiki.xda-developers.com/index.php?pagename=Hermes_UpgradeProblems
Please post USB monitor capture, otherwise can't help u.
Hi Pof,
Thanks for the offer, I will sort out the usb software on Monday. Are there specific actions that I should try, obvioosly I will usb monior everthing I do but I want to keep it to the point and not waist yr time trailing through huge log files.
Cheers
BTW - I have tried all options of recovery, such as attempting to install the latest radio and trying to install the new rom from an sd card, trying several roms and using imei unlocker - all without any joy.
I think the problem is that I have partially installed radio and bootloader 1.06 so I can't fix the problem.
Thanks again.
@wotthefok:
For me is faster to look at the usb log file, then I exactly know why the upgrade fails, otherwise I have to decode it from your feedback and I can't be really sure. Check the "upgrading problems" page on the wiki, if none of the steps there seems to fix your problem, post USB monitor log please.
Log Files as requested
Hi,
I have captured information using usb monitor and attached the zipped log files for your attention.
The first is called USB_monitor_log_Herm_120Radio_twice. This log details attempting to install the HERM_1.20.31.10_type2_radio_fixed upgrade, and running it twice - just in case.
The USB_monitor_log_runing_Cingular_1.34.502_11_uprgrade_twice.zip details attempting to install the RUU_HER_Cingular_1.34.502.1_1.16.00.00_wwe_cws_ship upgrade, simply using the standard ROMUpgradeUt.exe method. This generates the expected Vendor ID error.
My primary focus is to install the radio upgare or download my bootloader to 1.04. The PDA part of my m3100 does now freeze occasionally but at least functions whereas the phone is completely dead.
Thanks in advance.
Please attach capture in *ANSI TEXT FORMAT*, the .lgs file you zipped is totally unuseful
Edit -> Export and Save as type "ANSI Text files".
Also make sure you export in "COMPLETE" view, see the wiki for more details.
OK, Spot the novice.... I have now created a txt log file that captures activity of me running the 120 Radio upgarde - but only once this time. I still had to zip the file due to it's size. Hope this is OK.
I'll send the other logs within the next couple of hours. Please let me know if the output I have sent so far is acceptable?
Thanks
wotthefok said:
Please let me know if the output I have sent so far is acceptable?
Click to expand...
Click to collapse
No, it's a "basic" capture, you have to export a "complete" capture:
Start USBMonitor.
File -> New session -> USB Monitor -> Select USB device where your phone is connected -> Check "request view" -> Finish
In the upper part there are two tabs: basic and complete. Click on "Complete".
Right, Try again (duh!) OK, I've tried to keep the log files names as self-explanitory as possible... USB_monitor_log_Herm_120Radio_run1.zip is the r20 radio upgrade, 1st run and USB_monitor_log_Herm_120Radio_run2.zip the second run - without disconneting or resetting the device.
USB_monitor_log_runing_Cingular_1.34.502_11_uprgrade_ran_twice.zip is the Cingular upgrade run via the ROMUpgradeUt.exe, again run twice without disconneting the device.
Hope I got it right this time.....Please let me know if there is anything else I can do.
Thanks.
This time you got the captures right
- You're on bootloader 1.06: You don't have 'rtask' command, you won't be able to do any radio upgrade only.
- Your device is not CID unlocked (Security level=FF, unprivileged)
- The bad flash caused the CID area to corrupt (CID: Wait interpreter timeout)
- When flashing a full ROM you get a CID not allow (255) this is because your corrupted CID doesn't match the CID on the ROM.
The radio part is screwed, you could have fixed this if you where in bootloader 1.04 by flashing a full ROM, but as you are in 1.06 you can't because of CID checking. But you're lucky because the OS ROM is intact and you can boot the OS, you should be able to downgrade to bootloader 1.04 from OS and flash a full ROM after, which will hopefully fix your radio.
Just wait until a solution to downgrade bootloader is available (I'm working on it).
Hi,
As I suspected.... Suppose it's not all bad news though - just means that I have to be patient and use my communicator once more. Do you know if the guys at IMEI-CHECK have a downgrade solution? Even if it's a pay for option??
I have already got a IMEI-CHECK sim unlock from where I originally got the M3100 unlocked from Orange to work on o2. That said, I have run either unlocker 2 or 3 with the .unl that I know worked I now get
HTC HERMES v3c unlock
Starting communication.........
Checking device..............ERROR
The device you try to unlock is not supported.
Please contact your supplier site.
Device is rebooting
Press any key to quit this application.
I'm currently chatting to the guys at IMEI-CHECK re this problem.
Anything else I can do to assist you in anyway??
Cheers
wotthefok said:
Do you know if the guys at IMEI-CHECK have a downgrade solution? Even if it's a pay for option??
Click to expand...
Click to collapse
They have it (M3100v3cUnlock.exe), but it will not work on your device because your IMEI is corrupted and their unlocker will not be able to read it and to check/compare with the .unl key file.
Hi,
Just a quick update. The guys at MIGsofT LTD have VERY VERY generously said they'll have a look at the problem for me so my phone will be winging it's way to them today.
Thanks for your assistance and helping me be certain of the problem and to better understand the root cause.
Hope this information will prove useful to others.
Another quick update...
The guys at IMEI-CHECK (MIGsofT LTD) have rectified problems with my handset and managing to reinstall bootloader 1.04 in the process!!
They also turned my phone around in under three days and only charged me the cost of postage! I had previously been a customer of theirs but it was still a very generous and helpful offer and I would certainly pay for the service than have a duff handset - after all £250 + for a paperweight is rather excessive....
If you're experiencing a problem like mine why not get in touch with them and offer them money to have a look at your handset? No Guarantees but it seemed like my last chance, for a while anyway.
Praise to IMEI-CHECK for a brilliant service - they are King of the day !!
I bought a new HTC Softbank X01HT phone from China and bought it back to New Zealand. I have successfully changed all the settings to NZ network, except quite often it won't ring when someone calls me... I have got sms/txt working, internet access working, i can make calls, and sometimes i can receive calls...
If i take the battery out and restart it, I get a message which says "Your current operator 53001 is not supported. You should obtain an update from your device vendor..."
The countries pre supported are Ausi, hong kong, INdo, Macau, Malaysia, Philippines, Singapore, Taiwan, Thailand..... but not New Zealand.
My ROM version s 1.23.707.4
Rom Date 07/21/06
Radio Version 1.16.00.00
Protocol Version 32.53.7018.01H
Model Herm200
Pocket PX
Vodafone have been no help as they say they don't support parallel imported items, nor were Imate, same reason, kind of expected that.
Any ideas? this phone is really cool, but if i can't receive calls or roam with it, its basically useless for me...
ROM upgrade?
upgrading your device's ROM (and radio ROM) will probably fix your problem.
you should COMPLETELY read the wiki here at http://wiki.xda-developers.com/index.php?pagename=HTC_Hermes and also Mr Vanx *excellent* upgrade guides at http://www.mrvanx.org/cms/
read BOTH before you try to upgrade or risk bricking your device. however, a ROM upgrade will probably fix your device.
does not seem like your device is SIM-locked (or else it wouldn't work at all with your SIM), but you might want to read http://forum.xda-developers.com/showthread.php?t=301952 nonetheless
Sounds like you've got one of the Dopod roms installed. There are a few things you can try before upgrading the rom and radio.
1. Ignore the message. Just install the operator settings for your carrier manually or with a pre-made cab file. Some of them are listed here http://wiki.xda-developers.com/index.php?pagename=Hermes_provider_cabs , others you'll probably have to search for.
2. If installing your own settings still causes a conflict try deleting the other settings or use Bandswitch to disable them.
3. Try a hard reset and then, just before the customisations start, do a soft reset. The stuff Dopod put in their extended rom won't be installed but you'll also lose the 'operator not supported' message. You'll also have to manually input your carrier settings.
4. Upgrade to one of the wm6 roms but, as SkyyBoy says, be careful. Definately run Olipro's hardspl 2.10 (hardspl v7) and read Mrvanx's guide before beginning.
Oh yes, could you extract the 'you got message' sms notifies and post it here. I think it's kind of cool, but I'm too lazy to downgrade my rom just to get it.
I've just downgraded to the same ROM as you and I'm fine sending and receiving calls using my O2 and Vodafone sim cards (both from UK). I'm currently in UK but have also used this rom in China without problems.
The only difference between your and my setup is that I currently have radio 1.38.00.10. Yours is 1.16.00.00 which is (I think) the radio which comes with pof's CID/SIM unlocker - because the original shipped radio with this rom is 1.06.00.10. This suggests that the phone is super CID (a good start).
The radio is a bit old (which could be the problem) so I'd suggest upgrading it to at least 1.27.00.00 - but you'll have to read the threads and do some experimenting to find the best one for you. You can get the radios here http://wiki.xda-developers.com/index.php?pagename=Hermes_ExtractedRadioRoms.
Before you upgrade the radio use olipro's hardspl 2.10 (V7) http://forum.xda-developers.com/showthread.php?t=296722. An error during radio upgrades is the quickest way to brick your phone and hardspl 2.10 will allow you an easy way to recover from this.
I am facing the same problem in order to add TIM Brasil, however I am not finding any cab file with the configurations
Someone could help me, please please?
Hello all,
I Eb'd an HTC wizard (cingular 8125) running Wizard Love/NBD WM 6.
On the load screen I get:
AKU 2.3;
IPL and SPL:2.25.0001;
radio:2.25.11;
rom: 6.0.0.0.
My carrier is Tmobile.
Question 1: If my phone has this newer ROM and it takes calls on the Tmobile network it has been CID unlocked and SIM unlocked...right?
I wanna update my rom and think that I am competent enough to do so but there is alot to learn and this is not my full time gig...right.
Question 2: So, if I am correct in Q1 I should be able to flash roms right?
However when I attempt to do so the RUU gives me [error 224]. Active sync and or WMDC says its connected. (I installed the AS drivers in WMDC)
Question 3: Where do I go from here?
Question 4: The wi-fi is currently not working will a new rom potentially clear this up?
Thanks in advance for the time and advice..
grazie
hmmmm,
Well,did you updated to NBD wm6 yourself ? and how did you updated ? which method you adopted ? SoftSPL or HardSPL ?
You say its SIM unlocked as it takes calls on the Tmobile network .Did you SIM unlocked with lokiwiz03a ?
yes ! a G4 can be SIM unlocked but it can not be CID unlocked,however,it can be upgraded to wm6 rom,but with method either 'SoftSPL' or 'HardSPL'.With your present ipl/spl 2.25.0001 and you say its NBD wm6 running,then it must have been upgraded through 'SoftSPL' method,as it uses patched ipl/spl and Cid unlocks the phone temporarily,but it never permanently CID unlocks the phone.But with 'HardSPL' ,it changes the ipl/spl to a patched ipl 2.21.0001 and spl 2.21 olip.So everytime you want to upgrade,you'll have to upgrade using 'SoftSPL' method.
could you elaborate a little more about this.
Cheers!
Hey thanks for the correspondence zabardast_1, I have been getting frustrated and I have many times contemplated going for the brick or bust approach here.
So, I have done none of the updating on this rig. I rec'd it and I wanted it primarily for wifi however I can't get the wifi card/ (sdiowlan I believe) to even recognize an AP (... I posted in the networking forum but no response.) Thus my own reasoning leads me to believe I should start from scratch with a new rom unless you know of something else.
So, I am not the most savvy and thought that all of the info I had led to SIM and CID unlocked. I just read otherwise last night and in your reply. The info I have provided is accurate the IPL, SPL, radio, although I don't know which NBD release it is; just says 6.0.0.0 and release date: 2/2/07.
I am trying to get the new rom on the my device however and I would've probably already bricked it if I could get an RUU to communicate with my wiz. I always get [Error 224] when I run it and my phone is connected through active sync. I am running vista but have installed the AS drivers for WMDC. I also tried it at work the other day with XP same situ. I then tried flashing from the bootloader screen with an NBD, Wizard Love ( w/ Italian installer?), and T-mob (226102_22610105_022511). The only one that says it will update is the Tmob ROM, however I got cold feet at the update button and canceled.
Other funny stuff I have observed that may or may not be related to the problems I am having are:
Can't install cab files ie (enable rapi or Cert SPCS) and Wiz Sys Tools couldn't read my CID block and hard_SPL G4 gives me REXX error ( SPL_Version has no value).
So, any wizdom you or anybody can drop is much appreciated and needed at this point.
Whew...
Listen carefully. G4 Wizard cannot be CID-unlocked without paying money. (And yes, you are using a G4).
What you need now is to Flash your original stock carrier ROM (Or wizard love) to get your OS back. Then either use SoftSPL or install HardSPL and flash WM6 ROM.
Thanks Starkwong,
I will try installing wizard love tomorrow at work and if that don't work I will attempt a Cing ROM (will all of these work or do I need to mind my G3's and G4's for these???)
Grazie
So, It worked using Wizard Love at work and out of the bootloader window. Now I need to:
1.) Get wifi working.
2.) Get a newer ROM
I put a post up in the networking thread, I am a tool so far as these devices are concerned so be easy on me.
http://forum.xda-developers.com/showthread.php?t=372811
So do I get the wifi issue resolved before I reflash???
Thx again
I don't know what you mean by "wifi not working".
Maybe it is the wifi AP doesn't allow 11Mbps (802.11b) connections?
However, going to any of the WM6 ROMs should already set the registry to allow Wizard connects to G-Only APs. Just use HardSPL/SoftSPL and flash a WM6 and you will see.
OK so "wifi not working" may indeed be a general statement...
What I mean to say is that I am not able to connect to any wireless networks for internet not home (Linksys WRT 54G v5 with ddwrt firmware) or school (university wide) or my city's wifi network. It won't even detect them at least none that Ive seen since I've rec'd this phone. So, that is what I meant by the ambiguous statement.
So, being as your last post was a success I will try as you say and post the results tomorrow. Thanks again starkwong!!!
1 quick thing however, to be sure, I can now try the hard spl or soft spl method of tricking my phone to run an upgrade to WM6?
Still not able to get wifi APs????
OK although I have been successful at reinstalling the Mfg ROM and then Hard SPL'ing my wizard thanks to ya'll I still am unable to connect to a wireless network (see one even). I have the Olip on my SPL and I installed a TNT version of WM6 and I am still at work (drunk but still here). Anyway I can't see my wireless AP and I am beginning to think its a hardware issue if thats possible, i dunno the dynamics of this system maybe thats why it was for sale. In any event as usual I am willing to try what ever you guys throw at me as you're my only hope obi wan. Alright Im gonna go home for the night and try getting on to my home network.
Thanks again for all the help guys.
Is your device a original one from phone operator? I suspect your device is a China Dopod 838 with replaced casing, because the China version has the wifi hardware removed, so wifi can't be started even if an English ROM is used.
Looks to be authentic 8125
Starkwong, the Cingular logo and the 8125 model # are on the phone case where they have been when I've seen them before in pics. Therfore, I dunno I guess it looks like every other 8125 I've seen. Can I check the SN, IME or anything to be sure?
Thanks Again!!!
Starkwong,
I am getting all the options for wifi on my phone the LHS LED flashes green when I enable it and alternates blue green when BT is enabled. So, could it still be that its a dupod? I dunno but I am going home for the night... Thanks for your help. I will try connecting to my home network when I get there.
Hi everyone,my name's Larry and I just registered to the forums. Please forgive my newness but I am in a bit of a pickle here.
I have a MDA Vario II, aka Hermes 300, that I bought s/h off ebay. Works fine,no worries, but I upgraded to WM6 because i felt browsing was a little slow and the screen graphics werent as good as I expected. The upgrade was from the T-mobile site itself and all went fine. Only thing is I dont believe this phone can handle it(needs more RAM really) and after being online a while it gets really slow,like steerig a cow through treacle at times so I came to the conclusiong it was a bad move! Now I've noticed a link on here about downgrading to WM5 but is it that easy for one with no specialised tools or knowledge(tho i did build my own PC, or should I say ahem WE did)
Also a problem the phone has developed since the upgrade is it keep deleting my email settings, even tho on the 'desktop' screen it tells me i have so many unread emails in each account! So now i cant check emails from it either!
I do hope I can sort this out cos it is really frustrating having a PDA and not being able to browse properly!
Many thanks
Larry
Welcome to XDA-Developers larry. Well Firstly i would start with CID unlocking your device so that you can flash any rom you can do that by downloading hard spl from here
http://forum.xda-developers.com/showthread.php?t=296722
then once you have flashed that you can basically download and install any rom for the hermes. I have an mda vario ii and hate the t-mobile rom as it installs quite a bit of useless crap. I never use and it is also so damn ugly. if after installing a new rom you find you have internet connection problems and/or mms settings then download and run this http://rapidshare.com/files/92547562/UK_Setup.exe that will install the settings for internet and mms for all uk networks, the majority of the cooked roms on here though ,already have a network wizard to set it up for you, but better to be safe than sorry
P.S. I forgot to add if you are looking for speed and extra ram i would look for a vanilla(clean) rom, install that and then add the apps you want via cab files, you will find them scattered about all over this site
scousemartin said:
Welcome to XDA-Developers larry. Well Firstly i would start with CID unlocking your device so that you can flash any rom you can do that by downloading hard spl from here
http://forum.xda-developers.com/showthread.php?t=296722
then once you have flashed that you can basically download and install any rom for the hermes. I have an mda vario ii and hate the t-mobile rom as it installs quite a bit of useless crap. I never use and it is also so damn ugly. if after installing a new rom you find you have internet connection problems and/or mms settings then download and run this http://rapidshare.com/files/92547562/UK_Setup.exe that will install the settings for internet and mms for all uk networks, the majority of the cooked roms on here though ,already have a network wizard to set it up for you, but better to be safe than sorry
P.S. I forgot to add if you are looking for speed and extra ram i would look for a vanilla(clean) rom, install that and then add the apps you want via cab files, you will find them scattered about all over this site
Click to expand...
Click to collapse
Ah thanks for that but I have no idea what CID unlocking is(do you mean like unlocking the phone to other networks?) Also what's hard spl?? Totally in the dark about this!
Hermes300 said:
Ah thanks for that but I have no idea what CID unlocking is(do you mean like unlocking the phone to other networks?) Also what's hard spl?? Totally in the dark about this!
Click to expand...
Click to collapse
all your question answered here:
http://wiki.xda-developers.com/index.php?pagename=HTC_Hermes
I have looked thru the wiki and cannot find the advice I need.
My device has the following on it and what I would like to know is if I can actually drowngrade the device back to WM5.
The rom version is 3.60.110.4 (T-mobile UK)
The radio version is 1.50.00.00 so I assume that it is boot 0108.
The IPL is 1.04 and the SPL 2.03.
The protocol reads as follows 32.83.7020.20H
I have come across a guide that states if the radio is above 1.27.00.00 then downgrading may not be possible.
"(NOTE: If your radio version is currently HIGHER than 1.27.00.00 then it is very likely the radio bootloader is version 0108, this WILL NOT allow the radio to be downgraded to a radio containing BL 0106 and will result in a "NO GSM" error.)" -http://www.mrvanx.org/cms/index.php?option=com_content&task=view&id=41&Itemid=27
The other question I would like to ask is this - it is possible to put another verion of WM6 on with this radio version?
Thanks for any advice!
Can anyone help me here!
Do I need to SIM unlock my PDA to update the ROM to a custom ROM, for example Schaps_WM6Pro_Hermes_4.30 which I recently downloaded from here.
At the moment it is locked to T-mobile. I have also updated the SPL to 2.10 olipro and the radio is at 1.50.00.00 and the HTC boot is 0108.
Thanks guys
Larry
Hermes300 said:
Can anyone help me here!
Do I need to SIM unlock my PDA to update the ROM to a custom ROM, for example Schaps_WM6Pro_Hermes_4.30 which I recently downloaded from here.
At the moment it is locked to T-mobile. I have also updated the SPL to 2.10 olipro and the radio is at 1.50.00.00 and the HTC boot is 0108.
Thanks guys
Larry
Click to expand...
Click to collapse
I think you might not have gotten help 'cause it doesn't look like you've read what people pointed for you to read. Hopefully this'll help you get over the jargon hump and make progress. Having upgraded from the Offical T-Moble rom and swapped ROMs, it's definitely worth taking the time to learn how to do.
SIM unlock & CID unlock aren't the same.
If you've had you phone with T-Mobile for at least 3 month they will let Unlock you SIM (at least they do in the US). Contact them directly, you'll need an active account & phone number with them. This is free.
CID unlocking allows flashing ROMs onto your PDA. For some reason the folks at T-mobile, etc want you to have to look at their stuff every time you use a machine you bought through them. Using a cooked rom is like reinstalling XP without having AOL on your computer, makes life much better.
(flashing = installing to a PDA's Read Only Memory)
(ROM = OS + Radio + other stuff = basically everything thats on the PDA after a hard reset)
Flashing can be a dangerous thing, you don't want to 'brick' your PDA so you install an escape hatch. Hard SPL is that escape hatch.
(Brick = peice of baked clay = your PDA if a ROM install fails and you didn't install Hard SPL first)
The Hard SPL protects you if the ROM you installs fails 'cause power went out, ROM was bad, you bumped the cable, etc
http://forum.xda-developers.com/showthread.php?t=296722
Read & Follow the directions.
Select a ROM from here
http://wiki.xda-developers.com/index.php?pagename=Hermes_Cooked_ROMs
I have the same model & just installed Custel V2.5, seems to work well so far (day 2).
http://forum.xda-developers.com/showthread.php?t=364617
Good Luck
Thanks gt, and we have read advice on here but a lot of seems to be conflicting plus we seem to be just going round and round. Yep, ben there, yep read that etc.
I know the diff. between SIM and CID unlock but all I want to know is is it necessary to SIM unlock the phone to update a ROM?
I wont be using another network but will be staying with T-mobile W n W.
I did it!
Well I did it. flashed the phone with Schaps WM6 4.30 WWE.
Have noticed it runs faster than the previous T-Mobile WM6 and has some really neat features-you can adjust a lot more settings on the phone than before,quite impresed! Thanks for everyones help!
T-mobile HD2 Update MR Software (Version 3.14.531.1), What is it?
Today T-mobile release a new software update. Does anybody know what it is for?
I assume if you have a rom installed it is no good. I am running Energy Rom, and Radio 2.15.50.14, so I am assuming updating would be a bad idea.
yeah has anyone installed it and what are the benefits of it?? I want to know b4 installing...
You may get better answers over in the TMOUS HD2 forum on this
Features of the 3.14.531.1 update
I also had the same question - what is it that changed with the new HTC HD2 ROM? I spent a lot of time searching, and found this:
Pasting the text below, just in case that link dies (I hate it when that happens):
[pasted from phonesreview uk on 10/22/2010]
==============================================
For all you T-mobile HTC HD2 smartphone users out there who have been waiting for an official software update to land, you’ll be happy to know that today is the day you have been waiting for as T-Mobile is to release software update version 3.14.531.1 to the HTC HD2.
According to an article over on Tmonews, the new software update from T-mobile will deliver several fixes along with stability improvements and access to new apps like Amazon MP3 and Shazam. As for those bug fixes…
The new software update will fix such stuff as slow browsing when on Facebook, the inability to delete Gmail messages in the preview screen, Twitter errors, SMS being delivered to the wrong person, and the white screen whilst browsing the net, the inability to hear Visual Voicemail, unable to unlock the device, unable to unlock the HTC HD2 with correct password, and the lack of a space bar on company directory keyboard, and finally the speakerphone doesn’t work after using the Call Assist app to call 611.
HTC HD2 user can download the new software update by visiting t-mobile and following the instruction; however T-mobile will issue a notification by text to HTC HD2 users when the update is ready, which should be today the 19th of October so keep an eye on your text messages and let us know how you get along.
xxandy said:
I also had the same question - what is it that changed with the new HTC HD2 ROM? I spent a lot of time searching, and found this:
Pasting the text below, just in case that link dies (I hate it when that happens):
[pasted from phonesreview uk on 10/22/2010]
==============================================
For all you T-mobile HTC HD2 smartphone users out there who have been waiting for an official software update to land, you’ll be happy to know that today is the day you have been waiting for as T-Mobile is to release software update version 3.14.531.1 to the HTC HD2.
According to an article over on Tmonews, the new software update from T-mobile will deliver several fixes along with stability improvements and access to new apps like Amazon MP3 and Shazam. As for those bug fixes…
The new software update will fix such stuff as slow browsing when on Facebook, the inability to delete Gmail messages in the preview screen, Twitter errors, SMS being delivered to the wrong person, and the white screen whilst browsing the net, the inability to hear Visual Voicemail, unable to unlock the device, unable to unlock the HTC HD2 with correct password, and the lack of a space bar on company directory keyboard, and finally the speakerphone doesn’t work after using the Call Assist app to call 611.
HTC HD2 user can download the new software update by visiting t-mobile and following the instruction; however T-mobile will issue a notification by text to HTC HD2 users when the update is ready, which should be today the 19th of October so keep an eye on your text messages and let us know how you get along.
Click to expand...
Click to collapse
It will also **** up some stuff, while fixing others.
No Bluetooth stack fixes...
Its horrible...I'm having the worst connections to apps like Omarket, Marketplace, Slacker Radio...The Wifi will not stay connected...The only thing working as far as connections is the internet.
edit: Everything's working now except the Facebook app.
hi... does anyone know?
i buyed my hd2 t-mobile unlocked and i'm using it in argentina with "Claro Argentina"... the question is... if i change the rom in this Leo... it's going to be locked again to be used only with T-Mobile?
i don't want to blow it!
thanks!
cainmako said:
hi... does anyone know?
i buyed my hd2 t-mobile unlocked and i'm using it in argentina with "Claro Argentina"... the question is... if i change the rom in this Leo... it's going to be locked again to be used only with T-Mobile?
i don't want to blow it!
thanks!
Click to expand...
Click to collapse
no. Once a phone is network unlocked it cannot be locked again.
cainmako said:
hi... does anyone know?
i buyed my hd2 t-mobile unlocked and i'm using it in argentina with "Claro Argentina"... the question is... if i change the rom in this Leo... it's going to be locked again to be used only with T-Mobile?
i don't want to blow it!
thanks!
Click to expand...
Click to collapse
yes, it will be locked again! But, there is no reason why T-mobile will not request an unlock code from HTC on your behalf. Usually it takes 24-48hrs
erezgati2 said:
yes, it will be locked again! But, there is no reason why T-mobile will not request an unlock code from HTC on your behalf. Usually it takes 24-48hrs
Click to expand...
Click to collapse
Not correct sir, ons your device is bean unlock't and you upgrade/downgrade your Rom it will not be locked again.
DensoYamaha41 said:
T-mobile HD2 Update MR Software (Version 3.14.531.1), What is it?
Today T-mobile release a new software update. Does anybody know what it is for?
I assume if you have a rom installed it is no good. I am running Energy Rom, and Radio 2.15.50.14, so I am assuming updating would be a bad idea.
Click to expand...
Click to collapse
Why you say it's a bad idea...because the official is no good or because you can damage the phone this way ? I went from omega to the 3.14.531.1 and I experience many problems freezes restarts etc ...I think the update damaged the phone (although it was successful)
yorgosb said:
Why you say it's a bad idea...because the official is no good or because you can damage the phone this way ?
Click to expand...
Click to collapse
no, because it would remove the rom he was using, which he didnt want.
I went from omega to the 3.14.531.1 and I experience many problems freezes restarts etc ...I think the update damaged the phone (although it was successful)
Click to expand...
Click to collapse
you probably left hspl installed, 3.14 plus hspl = "many problems freezes restarts etc"
Ι am no expert but I am sure I replaced HSPL with SPL 2.08
Still I experience all these freezes and restarts with both 2.13.531.1 and 3.14.531.1 versions (in 3.14.531.1 it even freezes when you insert the memory card)
Can it be something else ?
yorgosb said:
Ι am no expert but I am sure I replaced HSPL with SPL 2.08
Click to expand...
Click to collapse
so, is that spl 2.08 or hspl 2.08 or spl 2.08.0000 or hspl 2.08.hspl? clarity please, leaving off the last 4 digits prevents us from double checking your work.
enter bootloader, whats it say next to spl? (all of it, not just the x.xx bit)
samsamuel said:
so, is that spl 2.08 or hspl 2.08 or spl 2.08.0000 or hspl 2.08.hspl?
Click to expand...
Click to collapse
Entering the bootloader right now says 2.10.0000
It must have been changed after flashing the official 2.13.531.1 (via USB)
Prior to doing that I had run the utility hspl3 and chosen 2.08.0000 (there are 2 choices in this utility as you say 2.08.0000 and 2.08.hspl) so (I thought) I had replaced the hspl with the official loader
Does this utility (hspl3) effectively changes the SPL or just updates the displayed number ?
Do you suggest following the micro SD card method to flash and not the USB method ?
I read somewhere that the ONLY way to replace the SPL is by flashing from micro SD...so what is the hspl3 utility for ?
Can you help me with that please ?
I need help because the phone right now although it seems to have been flashed correctly to official 2.13.531.1 and displays 2.10.0000 as it's SPL version freezes and restarts every some minutes...
yorgosb said:
Entering the bootloader right now says 2.10.0000
Click to expand...
Click to collapse
thats stock - any ending 0000 is stock
It must have been changed after flashing the official 2.13.531.1 (via USB)
Click to expand...
Click to collapse
yes, because you chose teh wrong 2.08 (next step) it will be changed by usb flashing. Had you chosen 2.08.hspl, this would still say 2.08.hspl
Prior to doing that I had run the utility hspl3 and chosen 2.08.0000 (there are 2 choices in this utility as you say 2.08.0000 and 2.08.hspl) so (I thought) I had replaced the hspl with the official loader
Click to expand...
Click to collapse
you replaced stock with stock
Does this utility (hspl3) effectively changes the SPL or just updates the displayed number ?
Click to expand...
Click to collapse
completely changes the actual spl software in your phone.
Do you suggest following the micro SD card method to flash and not the USB method ?
Click to expand...
Click to collapse
usb, always usb
I read somewhere that the ONLY way to replace the SPL is by flashing from micro SD...so what is the hspl3 utility for ?
Click to expand...
Click to collapse
thats old instructions.
for a start hspl .exeis for applying hspl, not just removing it - you can simply run hspl3 (or hspl4, whichever, makes no difference) - choose an spl ending .0000, hspl is gone. choose one with .hspl and, , , guess, , , yes! it loads hspl onto teh phone.
Can you help me with that please ?
I need help because the phone right now although it seems to have been flashed correctly to official 2.13.531.1 and displays 2.10.0000 as it's SPL version freezes and restarts every some minutes...
Click to expand...
Click to collapse
yep, happens a lot that, especially with stock roms,, give 3.14 a try perhaps.
3.14.531.1 has more problems...not only it freezes with certain applications (or making phone calls) but it freezes when inserting the microSD card as well...that's why I went to 2.13.531.1...at least I could keep the microSD inside without freezing...
And that's why I think it's not a firmware-software issue...that's what I'm trying to verify...
Now I have another bigger issue...after trying to flash a firmware that I think it wasn't T-Mobile's by mistake (the phone is T-Mobile model) the SPL is now 3.03.0000 and the 2.13.531.1 and 3.14.531.1 firmwares refuse to start flashing
Is there something I can do ?
I want to go back to 2.13.531.1 so I can sent it to T-Mobile
Thanks
Use hspl4, choose 2.08.hspl, reflash 2.13.
Sounds like you flashed a non tmous stock 3.14,,, don't do anything that silly again.
Just confirm for us,,, your send key is green, right?
Thank you very much I used hspl4 and managed to go back to the proper ROM
As for the send key if you mean the key with the little telephone on it yes it's green...the phone is T-mobile it says so on the top
Now that I have tried 2.10.531.1 - 2.13.531.1 and 3.14.531.1 versions and all 3
suffer from strange freezes and restarts when making phone calls or watching movies from the internet or the storage card (after some time) don't you think it's safe to presume that there is a hardware fault and return it to the vendor ?
Do you think there is something else for me to try ?
Thank you again for your help...