I upgrade my Tytn with new rom ( bootloader 1.09) . during installation it stop and I refuse recovery . after that I have a tytn with just bootloader screen which I cannot upgrade , reupgrade or even downgrade to other roms .
Notes: bootloader 1.09 never let to downgrade to 1.06 or 1.04 . what can I do:
I tried these ways :
1- install earlier rom with bootloader 1.04 or 1.06
2-install rom unlock 2a
3-install rom which downgrade 1.06 to 1.04 (DownGrade_SPL.rar)
non of them didn't help me
PLEASE ANYONE HELP ME TO MAKE ALIVE MY TYTN ..........
Related
I will soon have a Cingular 8525. I was thinking of upgrading it to the South African ROM. The one with the 1.09 bootloader.
I know the phone will have either a 1.04 or 1.06 bootloader so I can definitely unlock it, but I am looking for a full procedure thing. There is a lot with this, such as not being able to downgrade from 1.09 to 1.04 (which I found out you can actually do), and getting the SuperCID working, etc.
So could somebody be so kind and write up a procedure so I dont screw up a brand new phone. Thanks a bunch.
I second this request.
Actually I have read quite a lot about this on these wonderful forums by wonderful people but I am still not confident and therefore want to ask some specific questions:
1) My Jasjam original ROM is with bootloader 1.06. On the I-Mate site there is a ROM available with bootloader 1.04 and having the same CID as the one currently on my machine. If I install this ROM will my bootloader change to 1.04 from 1.06??
2) If after installing the ROM with bootloader 1.04 I attempt to install any other Hermes ROM say the Dopod ROM will it be possible simply by connecting my device with the computer through active sync and running the installation file on the PC?? Personally I think this will be possible as the bug in the bootloader 1.04 will allow me to do so.
3) My last question is that if after installing the i-mate ROM with bootloader 1.04 I install another ROM with bootloader 1.09 will I be permanently stuck with the bootloader 1.09 and afterwards not being able to install any other ROM.
I know some of my questions may sound foolish but I need the answers to gain some confidence that I have understood what I have read in these forums.
Kind Regards
@staulkor:
- Downgrade to cingular 1.30 rom to have bootloader 1.04 on your 8525
- Follow unlocking process as explained in the Readme file
- Double check that your radio version has changed from 1.13 to 1.16 after flashing the patched radio, once you're running the patched radio run Herm_Unlock_v2a.exe to SIM/CID unlock your phone.
- Upgrade to cingular 1.34 ROM again if you want the original ROM back on your device
@srmz:
1. yes
2. yes
3. yes, but read this
Thank Pof. I have heard much about you and all of your greatness throughout these forums. Thanks again
cant downgrade to bl 1.04 from 1.09
i have imate jasjam
rom hermes 1.35
radio 1.18
i want upgrade to radio 1.27
I can think of 2 ways to do this.
The first way requires that you have already made your Hermes SuperCID. Essentially, you flash the 1.01MFG bootloader then use that to flash the 1.04 Bootloader. Once complete, you'll be able to upgrade your radio. See the 1.01MFG bootloader thread for files/howto. I believe its all in the Wiki too.
If you are not SuperCID, then you must find the bootleg 1.04 bootloader flash solution to upgrade your radio.
sam2000 said:
cant downgrade to bl 1.04 from 1.09
i have imate jasjam
rom hermes 1.35
radio 1.18
i want upgrade to radio 1.27
Click to expand...
Click to collapse
Check your PM
By all means, take the time to SuperCID your device using pof's solution once you're on BL1.04 sam2000
i try many time to flash the 1.04 Bootloader by flash the 1.01MFG bootloader
and evry time error
can you tell me mr Sleuth255 how can downgrade from 1.09 to 1.04 stps by steps
thanks for you
If you are not SuperCID then you cannot succeed until you obtain the bootleg 1.04 downgrade solution. We do not host that here as it contains proprietary IMEI_check code.
However, from you first post it appears that you may be SuperCID since you are running the SA 1.35 TyTN ROM on a JasJam device. If that is the case, you can simply flash the RUU radio upgrade RUU_Hermes_TMD-TMA_Radiopatch_1.27.00.00_107_GER.exe.
edit:
to your question: the key to flashing the 1.04BL from the 1.01MFG bootloader is the version of mtty you are using. If you are trying to follow the instructions using a version of mtty that has the default "MFC" icon, then it won't work. You must use the version of mtty included in the 1.01mfg bootloader download.
my device SuperCID
Best option is to upgrade radio using RUU_Hermes_TMD-TMA_Radiopatch_1.27.00.00_107_GER.exe then.
How to downgrade from BL 1.09 to 1.04
sam2000 said:
cant downgrade to bl 1.04 from 1.09
i have imate jasjam
rom hermes 1.35
radio 1.18
i want upgrade to radio 1.27
Click to expand...
Click to collapse
I had the same problem and I solve it with this link http://uploadingit.com/files/8194/Downgrade_SPL.zip (read the instruction)now is only one way.
I have O2 XDA Trion (TYTN)
with bootloader v1.09 and now v1.04!!!!
slob13 said:
I had the same problem and I solve it with this link http://uploadingit.com/files/8194/Downgrade_SPL.zip (read the instruction)now is only one way.
I have O2 XDA Trion (TYTN)
with bootloader v1.09 and now v1.04!!!!
Click to expand...
Click to collapse
Dead Link!
The bootleg 1.04 bootloader solution is actively pursued by IMEI-check. It never surfaces for very long....
However, sam2000 doesn't need this since he is already SuperCID. The 1.01MFG bootloader solution can get him to 1.04BL.
Hi...
I've this problem where my friend's Dopod 838 Pro has its flashed crash at 14% and now its Bootloader is 1.09. Its giving the NO GSM error but I cannot seem to downgrade the bootloader because its CID is also corrupted. It doesn't even accept the generic Dopod ROM upgrade!
Anyone one help?
I've used this method several times and it worked for me:
http://forum.xda-developers.com/showthread.php?t=284401
holy hell.. it works.. apparently that M3100v3cUnlock **** does something wonderful...
thanks patmannyc
finally i upgrade to RUU_Hermes_TMD-TMA_Radiopatch_1.27.00.00_107_GER.exe but bootlodr stil 1.09
thanks for every body
Hi All!
Im runnign shaps at the moment and have installed the latest bootloader etc I have to send my phone back to our dealers as the buttons are giving me major problems. I downloaded the origional rom from their website, but when trying to install it... the phone boots the to bootloader screen and the sync gets lost not allowing the install to comeplete
any ideas what I need to do.....
PLEASE HELP!
Flash WM6 ROM back again to have your device working, then you can follow this guide for downgrade to WM5:
http://www.mrvanx.org/cms/index.php?option=com_content&task=view&id=41&Itemid=27
JaMMeX said:
Hi All!
Im runnign shaps at the moment and have installed the latest bootloader etc I have to send my phone back to our dealers as the buttons are giving me major problems. I downloaded the origional rom from their website, but when trying to install it... the phone boots the to bootloader screen and the sync gets lost not allowing the install to comeplete
any ideas what I need to do.....
PLEASE HELP!
Click to expand...
Click to collapse
1. Load HARDSPL V7 on your device. (Read the WIKI to know how to do that)
2. Flash your device using original ROM.
3. Downgrade IPL and SPL of your device.
4. Downgrade to SPL 1.10.oli ---> http://www.mrvanx.org/files/SPL/HERM_SPL1.10.oli_Only_CustomRUU.rar
5. Downgrade to SPL 1.04 or 1.06 :
(SPL 1.04, IPL 1.00 ---> http://www.mrvanx.org/files/SPL/HERM_SPL1.04_Only_CustomRUU.rar)
(SPL 1.06, IPL 1.01 ---> http://www.mrvanx.org/files/SPL/HERM_SPL1.06_Only_CustomRUU.rar)
Hi Guys,
I need to downgrade my phone for warranty purposes. Can any one of you give little further detail about what I need to get back to orginal rom/radio/spl and bootloader. Or in short to be able to send it back for warranty as for some reason my phone keeps dropping the GSM signal(tried flashing GSM-Radio and OS roms but no luck).
Following specs worked great for almost 6-8 months and now keep dropping signals
These were the specs from current ATT 8525 (HERM100)
AT&T 8525 (Hermes 100)
ROM: vp3G's WM6 v3.60 "Full" + Add-Ons
Radio: 1.54.07.00
IPL: 1.04 | SPL: 2.10.Olipro
I have already flashed OS and GSM ROM back to the latest ATT ROM from this link (http://www.htc.com/us/SupportDownload.aspx?p_id=65&cat=2&dl_id=67). So current specs under device information are
AT&T 8525 (Hermes 100)
ROM: 3.62.502.3
Radio: 1.54.07.00 (This is not showing as currently there are no signals on phone)
IPL: 1.04 | SPL: 2.10.Olipro
Or do you think I should flash the device to the original ATT ROM (factory installed) from this link (http://www.htcamerica.net/support/8525/software-downloads.html).
Once this is done, I wish to rollback SPL and Bootloader back to factory settings. I am not sure the original version of the spl and bootloader. So if you think it's anyhow possible, can you guide me through the instructions?
I have 10 days before I return my current device with replacement unit.
Thanks in advance
AJ
Downgrading SPL and ROM
Hi here are the steps you will need to perform if you have Hard SPL v7 installed on your phone. (How do you know if you have Hard SPL or not? Just go into bootloader and if you see SPL 2.10 Olipro, you have Hard SPL.)
Next you will need to downgrade to Hard SPL 1.10 Olipro. You can find it here Hard-SPL. This is very important as this will allow you to downgrade your SPL.
Once this is done verify the SPL version in bootloader. It should be SPL 1.10 Olipro.
Now flash the manufacture specific ROM. This will take the device back to factory settings. It will also take care of the IPL and SPL versions.
Hope this will help you.
-nbhor
nbhor said:
Hi here are the steps you will need to perform if you have Hard SPL v7 installed on your phone. (How do you know if you have Hard SPL or not? Just go into bootloader and if you see SPL 2.10 Olipro, you have Hard SPL.)
Next you will need to downgrade to Hard SPL 1.10 Olipro. You can find it here Hard-SPL. This is very important as this will allow you to downgrade your SPL.
Once this is done verify the SPL version in bootloader. It should be SPL 1.10 Olipro.
Now flash the manufacture specific ROM. This will take the device back to factory settings. It will also take care of the IPL and SPL versions.
Hope this will help you.
-nbhor
Click to expand...
Click to collapse
Great !! Worked like Charm !! Back to factory settings and ready for replacement.
Thanks mate
My dopod 838pro now in IPL 1.04 SPL 1.40olipro
i can`t flash any rom
now in tricolour screen
what rom can i flash ???
pls help me...
If you've installed hardspl, flash to any ROM; if not, flash to your original carrier's ROM.
Sounds like kennychannel has simunlocked his Hermes after Hard SPL was installed. Thats why he has spl - 1.40. Do as kareem9nba says then either supercid your phone or reinstall Hard SPL....