My dopod 838pro now in IPL 1.04 SPL 1.40olipro
i can`t flash any rom
now in tricolour screen
what rom can i flash ???
pls help me...
If you've installed hardspl, flash to any ROM; if not, flash to your original carrier's ROM.
Sounds like kennychannel has simunlocked his Hermes after Hard SPL was installed. Thats why he has spl - 1.40. Do as kareem9nba says then either supercid your phone or reinstall Hard SPL....
Related
i upgrade the ROM using this :
http://forum.xda-developers.com/showthread.php?t=283965
but I would like to downgrade it again to send for repair ...
i cannot flash it back to the original IMATE JAMIN rom , always stop at 95%.
Please help.
Just wait, suddently it continue.
Regards
"Just wait, suddently it continue."
No, it doesnt. Error msg comes out and forces you to it.
SPL can not be easily downgrade by flashing ROM in a G4.
Same problem
I have same similar problem.
I created new topic. I guess my topic more explanatory.
Lets go on here -> http://forum.xda-developers.com/showthread.php?t=331474
thanks..
NOW it is possible to downgrade SPL. Just flash HardSPL, after that you can DOWNGRADE SPL to any SPL you want!!!
nForce said:
NOW it is possible to downgrade SPL. Just flash HardSPL, after that you can DOWNGRADE SPL to any SPL you want!!!
Click to expand...
Click to collapse
When you first flashed HardSPL, which verson of the SPL was shown after reboot? That, what you had before, or the new one, of the HardSPL? I am asking, because I managed to keep the original O2 2.15 SPL and I really dont want to channge it (for repair reasons
After flashing the patched HardSPL I see 2.G4.4PDA (I have a G4 XDA Neo)! But the good news are that you now can flash all SPL versions you want, like the original 2.15 when it's inside of your ROM image and you can see it after rebooting!
How to use Hard SPL if a can't pass bootloader?
I tryed hard SPL, but after upgrading it back to 2.20.001., and I can't pass even to "Windows mobile" screen and it is frozen this position.
Any suggestions?
Thanks
hi guys, I have no idea to downgrade SPL for TITAN, I can't downgrade SPL from 2.47No2Chem to 2.40 olipro by flashing via RUU tools or TF card. when I finish flashing, it says success, but in tri-color screen it shows
TITA100
SPL-2.47NoChem Titan SPL EVT
CPLD-9
that's to say that it is no change after flashing. can I downgrade SPL by mtty? and how to? is there any SPL version great than 2.47? thank you!
Hi Guys,
I need to downgrade my phone for warranty purposes. Can any one of you give little further detail about what I need to get back to orginal rom/radio/spl and bootloader. Or in short to be able to send it back for warranty as for some reason my phone keeps dropping the GSM signal(tried flashing GSM-Radio and OS roms but no luck).
Following specs worked great for almost 6-8 months and now keep dropping signals
These were the specs from current ATT 8525 (HERM100)
AT&T 8525 (Hermes 100)
ROM: vp3G's WM6 v3.60 "Full" + Add-Ons
Radio: 1.54.07.00
IPL: 1.04 | SPL: 2.10.Olipro
I have already flashed OS and GSM ROM back to the latest ATT ROM from this link (http://www.htc.com/us/SupportDownload.aspx?p_id=65&cat=2&dl_id=67). So current specs under device information are
AT&T 8525 (Hermes 100)
ROM: 3.62.502.3
Radio: 1.54.07.00 (This is not showing as currently there are no signals on phone)
IPL: 1.04 | SPL: 2.10.Olipro
Or do you think I should flash the device to the original ATT ROM (factory installed) from this link (http://www.htcamerica.net/support/8525/software-downloads.html).
Once this is done, I wish to rollback SPL and Bootloader back to factory settings. I am not sure the original version of the spl and bootloader. So if you think it's anyhow possible, can you guide me through the instructions?
I have 10 days before I return my current device with replacement unit.
Thanks in advance
AJ
Downgrading SPL and ROM
Hi here are the steps you will need to perform if you have Hard SPL v7 installed on your phone. (How do you know if you have Hard SPL or not? Just go into bootloader and if you see SPL 2.10 Olipro, you have Hard SPL.)
Next you will need to downgrade to Hard SPL 1.10 Olipro. You can find it here Hard-SPL. This is very important as this will allow you to downgrade your SPL.
Once this is done verify the SPL version in bootloader. It should be SPL 1.10 Olipro.
Now flash the manufacture specific ROM. This will take the device back to factory settings. It will also take care of the IPL and SPL versions.
Hope this will help you.
-nbhor
nbhor said:
Hi here are the steps you will need to perform if you have Hard SPL v7 installed on your phone. (How do you know if you have Hard SPL or not? Just go into bootloader and if you see SPL 2.10 Olipro, you have Hard SPL.)
Next you will need to downgrade to Hard SPL 1.10 Olipro. You can find it here Hard-SPL. This is very important as this will allow you to downgrade your SPL.
Once this is done verify the SPL version in bootloader. It should be SPL 1.10 Olipro.
Now flash the manufacture specific ROM. This will take the device back to factory settings. It will also take care of the IPL and SPL versions.
Hope this will help you.
-nbhor
Click to expand...
Click to collapse
Great !! Worked like Charm !! Back to factory settings and ready for replacement.
Thanks mate
does anybody know which rom includes an IPL ?
or where can i find any IPL for titan ?
thanks
What is IPL?
IPL is part of the ROM ,
IPL = Initial Program Loader, this is the bootloader
Not every rom has IPL.
it is like BIOS of a computer, it is the first thing that is executed when phone boots up.
If the IPL is the bootloader, then I don't think that any ROM does. To change your bootloader, you must either flash a Titan Relocker to replace it to stock or Olipro 2.40 or nueSPL 2.47 to unlock.
btonetbone said:
If the IPL is the bootloader, then I don't think that any ROM does. To change your bootloader, you must either flash a Titan Relocker to replace it to stock or Olipro 2.40 or nueSPL 2.47 to unlock.
Click to expand...
Click to collapse
IPL and SPL are parts of the bootloader. I think first IPL is loaded then SPL.
Olipro 2.40 or nueSPL 2.47 are SPLs , most of the carrier roms have SPL only , there are very few that come with IPL , normally they dont upgrade IPL.
I never find an ipl for titan, or a newer spl than NueSpl 2.47
Once I flash hard SPL 3.03. And it can not be changed.
I flashed stock roms, cooked roms, flashed radio roms and apply task 32 all over and over succesfully but spl value still
SPL-3.03.HSPL XE
I can not flash android cause I can not flash magldr as it works only on hdslp 2.08
anybody to help?
Use Hspl4.
samsamuel said:
Use Hspl4.
Click to expand...
Click to collapse
1) To install this HSPL there must be any SPL version from this list on your device:
SPL 1.42.0000
SPL 1.62.0000
SPL 1.66.0000
SPL 2.07.0000
SPL 2.08.0000
SPL 2.10.0000
SPL 3.03.0000
Otherwise the installation will fail!
You can select which SPL version to install in "Choose SPL" screen. To check your SPL version, hold the Volume Down button and do a reset.
It is possible to downgrade to this SPL, by just flashing to an Official ROM with this SPL version.
my spl is not one of them. so I failed when I tried hdspl3 but hdspl4 worked. thanks.