does anybody know which rom includes an IPL ?
or where can i find any IPL for titan ?
thanks
What is IPL?
IPL is part of the ROM ,
IPL = Initial Program Loader, this is the bootloader
Not every rom has IPL.
it is like BIOS of a computer, it is the first thing that is executed when phone boots up.
If the IPL is the bootloader, then I don't think that any ROM does. To change your bootloader, you must either flash a Titan Relocker to replace it to stock or Olipro 2.40 or nueSPL 2.47 to unlock.
btonetbone said:
If the IPL is the bootloader, then I don't think that any ROM does. To change your bootloader, you must either flash a Titan Relocker to replace it to stock or Olipro 2.40 or nueSPL 2.47 to unlock.
Click to expand...
Click to collapse
IPL and SPL are parts of the bootloader. I think first IPL is loaded then SPL.
Olipro 2.40 or nueSPL 2.47 are SPLs , most of the carrier roms have SPL only , there are very few that come with IPL , normally they dont upgrade IPL.
I never find an ipl for titan, or a newer spl than NueSpl 2.47
Related
cant downgrade to bl 1.04 from 1.09
i have imate jasjam
rom hermes 1.35
radio 1.18
i want upgrade to radio 1.27
I can think of 2 ways to do this.
The first way requires that you have already made your Hermes SuperCID. Essentially, you flash the 1.01MFG bootloader then use that to flash the 1.04 Bootloader. Once complete, you'll be able to upgrade your radio. See the 1.01MFG bootloader thread for files/howto. I believe its all in the Wiki too.
If you are not SuperCID, then you must find the bootleg 1.04 bootloader flash solution to upgrade your radio.
sam2000 said:
cant downgrade to bl 1.04 from 1.09
i have imate jasjam
rom hermes 1.35
radio 1.18
i want upgrade to radio 1.27
Click to expand...
Click to collapse
Check your PM
By all means, take the time to SuperCID your device using pof's solution once you're on BL1.04 sam2000
i try many time to flash the 1.04 Bootloader by flash the 1.01MFG bootloader
and evry time error
can you tell me mr Sleuth255 how can downgrade from 1.09 to 1.04 stps by steps
thanks for you
If you are not SuperCID then you cannot succeed until you obtain the bootleg 1.04 downgrade solution. We do not host that here as it contains proprietary IMEI_check code.
However, from you first post it appears that you may be SuperCID since you are running the SA 1.35 TyTN ROM on a JasJam device. If that is the case, you can simply flash the RUU radio upgrade RUU_Hermes_TMD-TMA_Radiopatch_1.27.00.00_107_GER.exe.
edit:
to your question: the key to flashing the 1.04BL from the 1.01MFG bootloader is the version of mtty you are using. If you are trying to follow the instructions using a version of mtty that has the default "MFC" icon, then it won't work. You must use the version of mtty included in the 1.01mfg bootloader download.
my device SuperCID
Best option is to upgrade radio using RUU_Hermes_TMD-TMA_Radiopatch_1.27.00.00_107_GER.exe then.
How to downgrade from BL 1.09 to 1.04
sam2000 said:
cant downgrade to bl 1.04 from 1.09
i have imate jasjam
rom hermes 1.35
radio 1.18
i want upgrade to radio 1.27
Click to expand...
Click to collapse
I had the same problem and I solve it with this link http://uploadingit.com/files/8194/Downgrade_SPL.zip (read the instruction)now is only one way.
I have O2 XDA Trion (TYTN)
with bootloader v1.09 and now v1.04!!!!
slob13 said:
I had the same problem and I solve it with this link http://uploadingit.com/files/8194/Downgrade_SPL.zip (read the instruction)now is only one way.
I have O2 XDA Trion (TYTN)
with bootloader v1.09 and now v1.04!!!!
Click to expand...
Click to collapse
Dead Link!
The bootleg 1.04 bootloader solution is actively pursued by IMEI-check. It never surfaces for very long....
However, sam2000 doesn't need this since he is already SuperCID. The 1.01MFG bootloader solution can get him to 1.04BL.
Hi...
I've this problem where my friend's Dopod 838 Pro has its flashed crash at 14% and now its Bootloader is 1.09. Its giving the NO GSM error but I cannot seem to downgrade the bootloader because its CID is also corrupted. It doesn't even accept the generic Dopod ROM upgrade!
Anyone one help?
I've used this method several times and it worked for me:
http://forum.xda-developers.com/showthread.php?t=284401
holy hell.. it works.. apparently that M3100v3cUnlock **** does something wonderful...
thanks patmannyc
finally i upgrade to RUU_Hermes_TMD-TMA_Radiopatch_1.27.00.00_107_GER.exe but bootlodr stil 1.09
thanks for every body
I have official BL 1.04 and an very old (1.03.03.10) radio rom. I want to update my radio and to xda live. Is the following procedure correct:
1. flash olipro 1.04 SPL to prevent bricked device
2. flash Extracted Radio Roms using Des SSPL (1.34.00.10 from wiki page)
3. flash xdalive
But I read that flashing the radio using Des SSPL overwrites the olipro 1.04 BL. IS this true? If so, how do I prevent that flashing the Extracted Radio Roms overwrites the olipro 1.04 BL (in step 2 above)?
Thanks
don't worry about it. You can just flash the olipro BL back afterwards.
kw123 said:
I have official BL 1.04 and an very old (1.03.03.10) radio rom. I want to update my radio and to xda live. Is the following procedure correct:
1. flash olipro 1.04 SPL to prevent bricked device
2. flash Extracted Radio Roms using Des SSPL (1.34.00.10 from wiki page)
3. flash xdalive
But I read that flashing the radio using Des SSPL overwrites the olipro 1.04 BL. IS this true? If so, how do I prevent that flashing the Extracted Radio Roms overwrites the olipro 1.04 BL (in step 2 above)?
Thanks
Click to expand...
Click to collapse
no, flashing the radio will only overwrite the bootloader if there is a bootloader contained within the NBH file itself.
.VIBE: I thought it is basically not possible to downgrade back to BL 1.04 from BL 1.08?! And I think I would flash BL 1.08 on my device with the 1.34.00.10 SSPL rom from the wiki at http://wiki.xda-developers.com/index.php?pagename=Hermes_ExtractedRadioRoms, no?
olipro: I assumed that the extracted radio roms for SSPL in the wiki (see link above) do have a bootloader in the NBH file. At least that's how understood the sentence "These files are bundled as an NBH with the modified Hermes installer (using SSPL by Des)". So this is not true?
The one that I did (1.35.00.11) doesn't have a bootloader in the nbh. Only the radio rom itself. It will leave whatever bootloader you have intact. Olipro's RUU factory sends Des' SSPL to the device first then runs it. That's why an activesync connection is required.
so i can flash SSPL radio rom 1.35 and xda live and keep my original 1.04 BL? then I dont see a benefit of using hard-ssl for me...
kw123 said:
so i can flash SSPL radio rom 1.35 and xda live and keep my original 1.04 BL? then I dont see a benefit of using hard-ssl for me...
Click to expand...
Click to collapse
The benefit of Hard spl bootloader will become apparent if something goes wrong during the flash process.
Also, don't confuse SPL bootloaders with Radio bootloaders.
but even if something goes wrong during flash process and i cant get into wm: since i have BL 1.04 and o2 cid, i can flash a shipped o2 rom with my cid without SSPL, no?
correct. loading this "hard SPL" bootloader just makes it even safer all kudos to Olipro, he da man!
hi guys, I have no idea to downgrade SPL for TITAN, I can't downgrade SPL from 2.47No2Chem to 2.40 olipro by flashing via RUU tools or TF card. when I finish flashing, it says success, but in tri-color screen it shows
TITA100
SPL-2.47NoChem Titan SPL EVT
CPLD-9
that's to say that it is no change after flashing. can I downgrade SPL by mtty? and how to? is there any SPL version great than 2.47? thank you!
My dopod 838pro now in IPL 1.04 SPL 1.40olipro
i can`t flash any rom
now in tricolour screen
what rom can i flash ???
pls help me...
If you've installed hardspl, flash to any ROM; if not, flash to your original carrier's ROM.
Sounds like kennychannel has simunlocked his Hermes after Hard SPL was installed. Thats why he has spl - 1.40. Do as kareem9nba says then either supercid your phone or reinstall Hard SPL....
Once I flash hard SPL 3.03. And it can not be changed.
I flashed stock roms, cooked roms, flashed radio roms and apply task 32 all over and over succesfully but spl value still
SPL-3.03.HSPL XE
I can not flash android cause I can not flash magldr as it works only on hdslp 2.08
anybody to help?
Use Hspl4.
samsamuel said:
Use Hspl4.
Click to expand...
Click to collapse
1) To install this HSPL there must be any SPL version from this list on your device:
SPL 1.42.0000
SPL 1.62.0000
SPL 1.66.0000
SPL 2.07.0000
SPL 2.08.0000
SPL 2.10.0000
SPL 3.03.0000
Otherwise the installation will fail!
You can select which SPL version to install in "Choose SPL" screen. To check your SPL version, hold the Volume Down button and do a reset.
It is possible to downgrade to this SPL, by just flashing to an Official ROM with this SPL version.
my spl is not one of them. so I failed when I tried hdspl3 but hdspl4 worked. thanks.