I was wondering if anyone has opened the standard TyTN headphone plastic connector box? I want to change my headphones but need to get into the case. Does it just clip apart or is it sealed(glued)?
I can't afford to make a mistake as they are not available in South Africa yet.
It's very simple. There is no glue in it. Just get a very sharp knife and separate two parts (they are connected together with clips).
I've already replaced original headphones with Creative EP-630 isolator headphones.
Difference is very sugnificant!
I took some pics.
Put your nail into slit.
http://blog46.fc2.com/b/bdriven/file/_0010354.jpg
then you can open it.
http://blog46.fc2.com/b/bdriven/file/_0010356.jpg
direction & position of nails
http://blog46.fc2.com/b/bdriven/file/_0010365.jpg
solder of headphone
http://blog46.fc2.com/b/bdriven/file/_0010370.jpg
If you can't see pics directly, please follow from article(written in Japanese).
http://bdriven.blog46.fc2.com/blog-entry-39.html
Thank you all. - got the job done with confidence. Actually the case opens even easier than I thought.
Regards
can you guys explain step by step what it is necessary to do and if possible to post more pictures of the process.
dimushor said:
can you guys explain step by step what it is necessary to do and if possible to post more pictures of the process.
Click to expand...
Click to collapse
Hmmm...
open the mic box
unsolder the headphones
solder new headphones
close mic box
That's all. Not so difficult.
All you need is soldering iron, solder, flux, wire stripper(or knife), and new headphones.
When you cut & strip wire of new headphone, you'll see where to solder.
Red to RIGHT, green(or blue) to LEFT, the others to GND.
This article will help you.
http://wiki.xda-developers.com/index.php?pagename=handsfreethatdoesntsoundlikecrap
There is another way to change headphones.
http://www.4winmobile.com/tutorial-replace-hermes-headset-connector-with-35mm-socket-vt3146.html
or, if you don't need mic,
http://www.expansys.com/p.aspx?i=138247
# I'm sorry for my terrible English.
Related
In continuation of this topic http://forum.xda-developers.com/showthread.php?t=284909, i used all the information collected in this forum and other forums and i will briefly present you the procedure i used to modify XGPS car kit, so that it provided me with audio/microphone outputs, so that i can connect it to my car stereo, using it's line-in OR using an RF modulator.
First of all, i disassembled my car kit, using just a screwdriver
Then, using a soldering iron, i removed the integrated speaker (since i will not need it).
After that, i removed the existing 2.5mm connector, and i cut all the wires that lead to it. I used some plastic welding epoxy, to give strength to the plastic base that the PDA "sits". I then drilled a hole, in order to insert the new 2.5mm 4 conduct plug!
This is the new plug, taken out off my old handsfree
And this is how it looks inserted into its place
Then, i screwed it back on the car kit, and i used my "Wizard" in order to assure that it fits as before. With the "Wizard" still in place, i put some plastic welding and finished!!! Wait for 15 minutes for the epoxy to dry, and my 2.5mm 3 conduct factory plug, is replaced with a 4 conduct taken out of my old unused handsfree
I prepared 2 small "boxes", for holding speaker/microphone connectors(rear box) and for adding some small blue leds to give my mod a more "artistic" look(front box)!!! I mainly used some acrylic sheet(2mm) and aluminium sheet(1mm). I curved acrylic by heating it, using a heat gun i had. Generally, i had almost all the necessary tools/material already from my previous PC mods.
Acrylic boxes and alluminium covers, we painted black using a spray gun. The rear box, was(i have to admit) better prepared. I'm already planning to redesign the "front" box.
Rear and front boxes are screwd on the factory cradle.
Some more pics!!!
Here are the connectors i'll use. 2 for speakers(stereo-black) and 2 for microphones(mono-beige). I'll explain more on my decision in next posts
Here are the connectors mounted on the rear box
Here is my hand!!!
Alright!!! It took me some practise in order to solder the small wires of my old handsfree. In fact, i extended them using some wires i had, so that soldering on the connectors would be easier-and it was!!!
Now, why did i use more connectors than needed? The reason is simple. The connectors are setup as master-slave(at least in Computer hardware, this is how it's called). That means, one of each 2 connections of each type (speaker/microphone) come first. So, i'm planning to connect the 2nd connector to my car stereo(maybe using an RF transmitter). If i need to make a private call(that means cancel audio from my car stereo), then i simply plug in a stereo headset. This way, i can hear from the headset, without having audio from my car stereo! If i change my mind, i simply unplug the headset, and audio is directed again to my car stereo. Hope i didn't make it very complicated!!! The same applies for microphone (i already bought a small cheap microphone from ebay).
Now, on the picture below, you may notice a greenish layer(actuall it's ocean blue). This is actually some sort of UV acrylic. Some leds are inside the front box, so that when connected to the car, it displayes a light blueish color (Uv acrylic makes it look fantastic!!!)
Now, you can preview the back cover(made off 1mm aluminium) of my cradle. It's also painted the same black color. 4 holes will be used to insert 4 black rivets to secure it in place
Unfortunately no more pictures for now... I'll try to post more in the next days, as the cradle is ready and already installed in my car. I get power from my car's switch(12V) to drive the cradle and an RF transmitter (Monster Radioplay 300). My stock head unit doesn't have an audio-in, so this explains my decision. Sound is perfect when using it for handsfree (no echo, great sound). Now, when playing music, it sounds as it gets from a strong radio station, so i guess this means success!!! Plus, i have the option to connect it to my future head unit (if it has a line-in of course!!!).
Now, my next steps;
1)I'll redesign the front cover, so that it looks more tidy(i used some ugly screws-paint also is very glossy)
2)I'll make a small stand for my car, to mount the RF transmitter and the microphone.
3)Prepare my "Wizard" for speach recognition, used to make calls-play songs etc-Do you have any suggestions on that?
So.... more pictures to come in the next days!!! Pls ask for any questions or any help you need if you want to make something similar or better OR if you have any suggestions/questions
Hey
I have always changed the standard Htc earplugs, changed them to better earpieces. And yes, this is what I did with the Hero Headset to.
The modification is done because I see no reason why not. The Koss Portapro is going to be much more useful (for me at leased). More useful because of the microphone, and the controller for music and phonecalls, though it's still a regular headset.
The guide:
You'll need some stuff :
The Htc Hero headset
A Koss Portapro (or other earpieces that you want to use.)
Superglue
A soldering iron (+ soldering tin)
Miniature screwdrivers
When you got those parts ready, we'll start with the Htc headset. Take off the little Rubber ring. And gently use a small screwdriver(flat is probably best) to pop the speaker out.
like this
If you look closely the Left earpiece has 2 wires, one yellow] and one green, the Right earpiece has one yellow and one red.
Use the Soldering Iron to get the wires loose from the Htc Hero Headset. Gently use a screwdriver to push the wires down in the earpiece when the wires are loose. Then gently pull the core out.
Take off all puffy stuff attached to the Koss, detach them from the "frame" and use a screwdriver to pop open(break) the cover over the cables solder points.
Take a closer look and remember where the Red and the Green was attached. I noticed on my Koss, that the coloured wires was soldered on that side with the little red dot.
At last solder the right wires on the right place. Gently squeeze the wire into the "holder" and use the superglue to glue the "hatch" inplace. Careful if you use a strong glue.. You'r finger are at risk..
Attach the speakers to the "frame" and take the protective puffy foam on them again and try them out!
Hope this was helping for you eager Hero fans!
ps: I'm not responsible for any damage to your headsets or phone. Do this modification at own risk.
Fraction!
It looks great, Nice work
Im going to try this. I have like 4 or 5 koss porta pro lying around. And im not planning on using the Htc headsett. It got no bass
Did this with my Creative EP 630's Working awesome!
hero headset
Would that hero headset works on the htc HD ?????? PLEASE someone let us know !!
Really nice and easy to do, thanks a lot !
Very nice trick, works perfectly and it's really easy to realize !
Thanks a lot.
Did this with my favorite Sony in-ear buds. Worked a treat, even with my shoddy soldering skills.
@ shlomo78:
If the HD supports the controller on the Headsetwire, then yes this may work.
@ everybody:
Thanks guys, for the replayes, I'm greatful. The kind of tutorials like this is helpful and fun to read, and i hope more people will make similar about otherstuff
The Archos 101's speakers are overdriven, so many people are having speakers crap out, even after getting replacements. I replaced mine with higher wattage/sensitivity speakers, and now have no speaker failure, and much better sound quality and loudness. I used two Mouser.com Part # 253-CE221-RO.
I'm not going to bother with pictures, as it's quite simple:
1. Unscrew the Torx screws on back, 6 total. The two closest to the side buttons are longer, make sure you note this. A Torx 4 or 5 bit will be needed, though you could file a flatedge down in a pinch to make it work.
2. Slowly pry open the edges of the case with a plastic wedge. There are free ones included with lots of phone repair kits, or you can file something down in a pinch. Use a flatedge screwdriver if you don't care about scratching the case, but don't push it too far in if it's metal.
3. Once all the clips have popped, open the halves until you see the big flat cable, that's the screens connector. Disconnect it from the back of the screen. Slowly! It has adhesive behind it, let it slowly come apart so you don't rip the aluminum shield on the back of the screen.
4. The Power/Volume buttons will probably fall out, they are all attached together, just set it to the side. Lay the two sides open on a table. There are still 2 things connecting the halves to each other, but you don't need to remove them if you keep the halves close together.
5. Unsolder the old speakers and pry them out. There is a little strip of adhesive holding them in. If you can keep it in place, you can use it to affix the new speakers. Make sure you center the new ones in the hole, there will be a couple of millimeters space left over. Make sure the plastic cone of the speaker will not be touching any adhesive underneath it. If you make sure it's centered, you shouldn't have a problem. Use a couple dots of hot glue to firmly affix them in their holes. Don't overdo it, you don't want glue to seep under the speaker and touch the cones.
6. Reverse the takedown procedure to put everything back together, don't forget the Power/Volume button strip. Also, don't overtighten the screws, you will see a very slight depression on the front of the tablet where the screws are, if it's a noticeable depression, back the screws out a quarter turn.
7. Boot up and enjoy. Make sure you turn the volume down a bit before playing, these speakers are louder than the originals. At full blast it feels like it's going to vibrate the screen to pieces.
I also ripped off my micro usb port, so for anyone with very good soldering skills, or alot of solder braid(and balls), the part number for that is ZX62D-B-5P8. I had to use trace ribbon(Flexible Flat Cable) to remake the traces, as they were ripped off as well. Crack open an old CD-ROM or check the bottom of an old hard drive to find some with the correct pitch if needed.
I'm also adding front speakers on the right hand-hold, kind of like the A70(no room for one on the left on A101). Post a reply if you'd like a parts list and tutorial for that process.
Just finished the testing. I'm updating the OP with results and guide.
Thanks for posting the detailed instructions. Might have to give this a try, given that one of my speakers blew after a couple of weeks. Also intrigued by the front speaker....
How did you identify which speakers would be a suitable replacement?
Yes please, I'd love to have the part list and detailed tutorial for adding front speakers to the A101IT because I can go right down the street to Mouser Electronics because I live close to there and know where it is!
So how well do these new Kobitone Speakers from Mouser fit inside the A101IT; Is it a tight fit or loose one? Also, what is the difference in speaker size (if any difference) and are the stock A101IT speakers' shape circle like the Mouser ones or oval?
Thanks mate!
fisha21 said:
Thanks for posting the detailed instructions. Might have to give this a try, given that one of my speakers blew after a couple of weeks. Also intrigued by the front speaker....
How did you identify which speakers would be a suitable replacement?
Click to expand...
Click to collapse
I've built alot of custom electronics, so I measured the old ones and used a bit of experience to guess the rest. There is a couple of millimeters of space left around the speaker, but it's super close, and the original speakers actually have an extra plastic case on them because they couldn't find cheap enough speakers that fit exactly. You won't find a closer match in size to the originals, and they have the best sound of any speaker in this size range.
spicy_puerto_rican: The stock speakers are round, with a large plastic collar to make them slightly larger. My replacements are a few mils smaller, but even the originals needed adhesive to hold them in, so the size difference really isn't an issue. As I said, they have the best sound quality and volume of anything in the size range.
With the loudness of the new speakers, I've decided not to bother putting front speakers in, but if you open your archos, you'll see there is so much space in the right hand-hold you could do almost anything in there. Feel free to experiment.
Thank you! My speakers went bad. I followed your instructions and the new speakers work great. It was difficult, but it would have been even harder without your instructions.
Jason
Tesla74 said:
Thank you! My speakers went bad. I followed your instructions and the new speakers work great. It was difficult, but it would have been even harder without your instructions.
Jason
Click to expand...
Click to collapse
No problem. It's been a couple of months now and they still sound good...
People can't hear me well, no matter what i do, flashed different roms (various cm7.2 and oxygen), wipe, etc...
My mic gain is very low and ppl can't hear me well, guess i could open my phone but i can break something :S
Has this happened to someone??
As a last resort i'll do a kdz reset
It's either a kernal problem or hardware. If it's a hardware problem, then the microphone connector is most likely disconnected partially, or broken.
Try an app like Iris or Vlingo and see if it hears you
Regards,
CJ from Team OpenPhone
[Sent from CJ's LG Optimus One running Open MIUI GingerBread Build 1.1 Alpha]
CJJames said:
It's either a kernal problem or hardware. If it's a hardware problem, then the microphone connector is most likely disconnected partially, or broken.
Try an app like Iris or Vlingo and see if it hears you
Regards,
CJ from Team OpenPhone
[Sent from CJ's LG Optimus One running Open MIUI GingerBread Build 1.1 Alpha]
Click to expand...
Click to collapse
I've tried different kernels, also tried KDZ flashing, and nothing, mic works but theres too little gain and so no one hears me well , im shouting all the way for ppl to hear me XD
Guess its time for repair service?
EDIT1: After opening the phone following carefully a disassemble guide and then put everything in place seems that mic improved a bit,
Can anyone tell me how far can you record a video or file without loosing volume gain (in mic)
Change the Mic from mobile repair shop
Sent from my LG-P500 using xda premium
finally managed to fix the !"#"! mic, i've opened the entire phone, then i saw that in mic hole theres some kind of foam and after rearranging this foam it fixed the mic xD
Optimus V microphone fix how to
This is how I fixed the microphone on Virgin Mobile's Optimus V . Note: this will also work for any other optimus phone.
Problem: My microphone worked, but it was hard to hear me. I would have to cup my palm around the microphone hole and speak loudly for anyone to hear me.
Fix:
You will need to open the phone completely. Take off the black cover on the back of the phone, followed by the SD card, and battery. Now you are ready to begin.
1- Remove the 6 tiny screws (my screws were very difficult to get off, this is how I did it. 1- found the CORRECT size screwdriver, 2- pounded the top of the screwdriver twice, lightly. 3- used a pair of needle nosed pliers around the screwdriver and turned it using that (your other hand should be holding the screw driver in place). This will loosen up those difficult tiny screws.
2- Pry open the phone slowly and carefully.
3- Remove the buttons.
4- Remove the 2 tiny screws at the bottom of the phone.
5- Lift out the mother board from the phone's clear screen. (this doesn't need to fully come out. Just enough to get into the microphone at the bottom of the phone.)
6- The little hole for the microphone is actually a a foam with a tiny hole in it that carries sound to the microphone on the motherboard. You will remove both pieces of foam tubing for the microphone. The first one is simple to get out, just pry it out with the screwdriver. The second one I used a tiny paper clip and inserted it into the microphone hole. Then I used the screwdriver to scrap it out.
7- Once it is out, blow into it removing any dust.
8- Put the phone back together. (2 screws at bottom, buttons, snap backing on, six screws, battery, SD card, battery, and black backing.
YAY! Now it is fixed.
What happened was during the course of time and dropping it a few times, the microphone tubing's alignment got off. So what we did to fix it, removed the tubing completely. In actuality, the person on the other end should actually hear you better than the factory alignment.
Note 1: Since there is no longer tubing, dust can get into the microphone more readily. Please make sure you clean the inside of your phone every so often.
Note 2: I am not responsible for anything you do to your phone. I am simply telling you how I fixed my phone.
Good luck! =]
Micah
ProfessorMosby said:
This is how I fixed the microphone on Virgin Mobile's Optimus V . Note: this will also work for any other optimus phone.
Problem: My microphone worked, but it was hard to hear me. I would have to cup my palm around the microphone hole and speak loudly for anyone to hear me.
Fix:
You will need to open the phone completely. Take off the black cover on the back of the phone, followed by the SD card, and battery. Now you are ready to begin.
1- Remove the 6 tiny screws (my screws were very difficult to get off, this is how I did it. 1- found the CORRECT size screwdriver, 2- pounded the top of the screwdriver twice, lightly. 3- used a pair of needle nosed pliers around the screwdriver and turned it using that (your other hand should be holding the screw driver in place). This will loosen up those difficult tiny screws.
2- Pry open the phone slowly and carefully.
3- Remove the buttons.
4- Remove the 2 tiny screws at the bottom of the phone.
5- Lift out the mother board from the phone's clear screen. (this doesn't need to fully come out. Just enough to get into the microphone at the bottom of the phone.)
6- The little hole for the microphone is actually a a foam with a tiny hole in it that carries sound to the microphone on the motherboard. You will remove both pieces of foam tubing for the microphone. The first one is simple to get out, just pry it out with the screwdriver. The second one I used a tiny paper clip and inserted it into the microphone hole. Then I used the screwdriver to scrap it out.
7- Once it is out, blow into it removing any dust.
8- Put the phone back together. (2 screws at bottom, buttons, snap backing on, six screws, battery, SD card, battery, and black backing.
YAY! Now it is fixed.
What happened was during the course of time and dropping it a few times, the microphone tubing's alignment got off. So what we did to fix it, removed the tubing completely. In actuality, the person on the other end should actually hear you better than the factory alignment.
Note 1: Since there is no longer tubing, dust can get into the microphone more readily. Please make sure you clean the inside of your phone every so often.
Note 2: I am not responsible for anything you do to your phone. I am simply telling you how I fixed my phone.
Good luck! =]
Micah
Click to expand...
Click to collapse
I have an Optimus V and this very thing happened to me... In my case instead of foam, it was a rubber grommet. I just pulled it out. I tried re-positioning it but it sounded SO much better without it that I left it out. The hole is SO tiny I can't imagine too much dust getting in there, but I am considering perhaps placing a small screen over the hole, inside the case. Interestingly, I don't recall dropping the phone and can't think of any reason why this happened all of a sudden - maybe the adhesive that holds the rubber just shrunk enough to let go? I dunno. Anyway my phone works great again.
So, I was never a believer when I heard of people cleaning the lint out of their headphone jacks and getting them to work again.
That is, until I found a quick and easy solution to fix it. I've read of people using compressed air, paper clips and electric parts cleaners. So I had some duct tape handy and an idea popped into my head. I took a small strip of tape and twirled it into a small enough stick shape, inserted it into the jack and turned it and pulled it out. I did this several times removing a tiny amount of lint each time. The amount of lint that I pulled out was so small that I didn't think it was going to make a difference. Then I plugged in my headphones and, bam, they worked like new!
As a side note, the jack on my phone is loose and wiggly, so naturally I thought that maybe the connections inside the phone were loose and I was going to have take the phone apart to try and fix it. My headphones would connect and disconnect whenever I would wiggle or even touch my headphone jack and it gradually got worse. Then one day it stopped working altogether.
This is not some gimmick. Give it a try. And never insert anything metal or sharp into the jack. You could damage the contacts.
Sent from my DROID X2 using Tapatalk 2
Juice3250 said:
This is not some gimmick. Give it a try. And never insert anything metal or sharp into the jack. You could damage the contacts.
Click to expand...
Click to collapse
I'm a diehard lurker, but I have to bump this. Just fixed the exact same issue on a heavily abused Razr Maxx that I'd received from a friend, after months of dealing without headphones.
If you shine a light into the headphone jack and can't see the contacts at the very bottom, it's definitely lint that's keeping the jack from working. Personally, I had to use a paperclip to loosen it up a bit, but I'm pretty sure mine was a special case. Don't attempt with anything metal/sharp unless you have a light touch, and the tape on its own isn't helping.
I just tried this method on my Xperia Sola and it worked , I just reverse wrapped a duct tape on a piece of tooth pick so that the sticky part is outside and I entered it through the hole and turned it and pulled it out multiple times till all the Lint(en.wikipedia.org/wiki/Lint) were gone.
It cleaned the inner part and now it is working like new.
Simple but effective fix!
I was about to send my Xperia Z1 Compact for repair for this very reason, but I stumbled across this post. Thanks so much! Saved me a lot of hassle and embarrassment. A big ball of fluff came out of the headphone jack and now the sound is great. Cheers!
tahsnks for the idea, i finally used a standar pin with electrical tape around it and worked great!
Never had a problem with my DX2, but used this with both my Droid 3, and Droid 4
Problem solved
I was about to throw my nexus 5 out the window because of the issue with the headphones and i didnt want to i already had thrown out a previous cellphone because of this. I just turned off the phone ( paranoid paper clip or something could make contact with something and mess it up. And started to slowly pick and poke away. The amount of lint I pulled out was unbelievable! I didn't stop until i saw a shiny bottom. Now it's works perfectly fine . someone should invent something to either prevent this or an item to clean it. Just saying. Thanks!
Wooh! a big as$ thank you man! the way you worded your post was the only thing that made me give this charm a try. Now I'm the lucky owner of TWO working headphones haha
Mine does not have lint.I have cleaned it. But still it does not produce sound when I plug the earphone. I have to hold the earphone tightly to connect fully with the audio jack. Can you help me guys?
I tried this and I was able to clean out some lint, it helped some, but I still have to push it one way to get sound