Please find below the infomation of my softbank X01HT which I bought few days ago. The softbank has been unlocked by the shop and is running traditional Chinese on WM5.
IPL 1.01
SPL 1.09
ROM Ver 1.23.708.4
ROM Date 07/24/06
Radio 1.06.00.10
Comm Protocol 32.37.7010.01W
Please advise if it is safe to run HARDSPL for upgrading to WM6.
Will there be any adverse/damaging effect?
Do I need to downgrade the ROM version before running HARDSPL V7.
Please advise the procedure.
Thank you in advance
Ken
Isi
I believe you can just put it into bootloader mode and flash the WM6 Dopod ROM. A friend of mine did this recently.
i hv just done it. i did not encounter any major problem except after flashing it with the official ROM, the storage memory is very low ....
KENPPCPHONE said:
Please find below the infomation of my softbank X01HT which I bought few days ago. The softbank has been unlocked by the shop and is running traditional Chinese on WM5.
IPL 1.01
SPL 1.09
ROM Ver 1.23.708.4
ROM Date 07/24/06
Radio 1.06.00.10
Comm Protocol 32.37.7010.01W
Please advise if it is safe to run HARDSPL for upgrading to WM6.
Will there be any adverse/damaging effect?
Do I need to downgrade the ROM version before running HARDSPL V7.
Please advise the procedure.
Thank you in advance
Ken
Isi
Click to expand...
Click to collapse
yes it is safe... but you need an activesync partner ship setup to installl HardSPL as it needs to push SSPL to your device... for more information read www.mrvanx.org
Zilch said:
I believe you can just put it into bootloader mode and flash the WM6 Dopod ROM. A friend of mine did this recently.
Click to expand...
Click to collapse
with updating/installing HardSPL the device needs to be in Windows with activesync connected so SSPL can be pushed to the device...
I trid to install HardSPL Version 7 (2.10.olipro).
I activesync connected and run RUUWraper.exe
I go through all the selection right and on the last page after I click "next" I press yes on my Softbank. but the flash download didn't started and the Softbank reset and go into the engineering mode where I still see :
IPL- SSPL Des
SPL-1.09.ds
All my versions are the same as Ken which are:
IPL 1.01
SPL 1.09
ROM Ver 1.23.708.4
ROM Date 07/24/06
Radio 1.06.00.10
Comm Protocol 32.37.7010.01W
Could anyone advise any solution in proceed with HardSPL installation?
Thanks a lot
Henry
Hi Conorau,
Following the procedure in this forum, my softbank successfully upgrade to WM6 without any problem. Good luck
Ken
IPL 1.04
SPL 2.10.01 olipro
ROM Ver 3.54.708.2
ROM Date 07/05/07
Radio 1.47.00.10
Comm Protocol 32.80.7020.20H
here is solution
I think it usefull !
http://bestsolution.spaces.live.com/Blog/cns!E39312F16E0FBE41!728.entry
and more infomation http://forum.xda-developers.com/forumdisplay.php?f=355
KEN can you tell me exectly what you did? i also want to upgrade my phone
is it ok for my phone to to according to this FAQhttp://wiki.xda-developers.com/index.php?pagename=Hermes_UpgradeGuide + take this ROM http://forum.xda-developers.com/showthread.php?t=321332
please help!
Help needed.
I have flashed my tytn with the original WM6 version now i bootloader spl 2.03 can i downgrade this spl ? If not what can i do whit this version ??
I have tried to upgrade radio version to 1.51 but i always gives me an error
mrc_louco said:
Help needed.
I have flashed my tytn with the original WM6 version now i bootloader spl 2.03 can i downgrade this spl ? If not what can i do whit this version ??
I have tried to upgrade radio version to 1.51 but i always gives me an error
Click to expand...
Click to collapse
flash hard-spl genius.
hello everybody,, pls help me,, i want downgrade SPL 1.11 to 1.04,
i try to download from http://www.mrvanx.org/thg/index.php?option=com_content&task=view&id=19&Itemid=27
but he's file can't work.. so give me link for SPL 1.04.
i waiting ur respons,, help me guys,,
You already posted your problem in another thread and my reply was:
I have never tried going from SPL 1.11 directly to SPL 1.04. I would suggest flashing HardSPL v7, THEN downgrading to Oli 1.10 then to SPL 1.04...
A friend of mine gave me his Athena 8 GB for updating.
As I understood, I need for a new rom a higher SPL-Version than V1.06. Is that right?
I only found a tutorial for SPL 1.2 to 3.5.
Bootloader:
ATHE100
IPL-v1.00
ATHE100
SPL-v1.06.0000
Thanks in advance.
Anyone got AT100 SPL 1.06 WM6
Searching for AT100 SPL 1.06 T-Mobile update
Guenter
Hello i have HTC_Europe 401 and SPL 5.13.2250.1
Can i try Downgrade with SLSPL 5.11.401.xxxx* from ansar?
I cry becouse i flash orginal flash 5.13 without file SPL_Singed.nbh, but my HSPL change to SPL 5.13.2250.1
I don't now how can i downgrade my SPL Help me
Regards
OK i use ROM SLSPL 5.11.2250.1 by ansar and i flash. I have error after 100% but i see in my mobile SPL 1.28.2250.3 and speed flash ROM to SPL 1.28.2250.4. Now have HSPL and CFW
Topic Resolved.