Bootloader 2.03 - 8525, TyTN, MDA Vario II, JasJam Software Upgradin

Help needed.
I have flashed my tytn with the original WM6 version now i bootloader spl 2.03 can i downgrade this spl ? If not what can i do whit this version ??
I have tried to upgrade radio version to 1.51 but i always gives me an error

mrc_louco said:
Help needed.
I have flashed my tytn with the original WM6 version now i bootloader spl 2.03 can i downgrade this spl ? If not what can i do whit this version ??
I have tried to upgrade radio version to 1.51 but i always gives me an error
Click to expand...
Click to collapse
flash hard-spl genius.

Related

Downgrade Radio Rom -- help

Hi I have a Tytn with Radio Rom 1.34.00.10 and I need downgrate it to the original rom Radio Version 1.03.03.10 because It doesn't work very well and any call drop after only 5 minutes.
HERM200
IPL-1.00
SPL-1.04
I try to downgrade with the original rom that I found on wiki.xda.... but when I reset the Tytn the rom is ever the 1.34.
Can everyone help me?
Thanks
use SSPL to flash the rom, then the radio version will be downgraded, but the radio bootloader will be not.
If I use SSPL flash the warrenty is lost?
I need to send it to the CATA HTC because the phone drop every call.
fabiuzz said:
If I use SSPL flash the warrenty is lost?
Click to expand...
Click to collapse
No if you flash a shipped rom, but to downgrade the radio when you have radio bootloader 0108 you must use SPL 1.09, so use SSPL.

Upgrade Softbank X01HT to WM6

Please find below the infomation of my softbank X01HT which I bought few days ago. The softbank has been unlocked by the shop and is running traditional Chinese on WM5.
IPL 1.01
SPL 1.09
ROM Ver 1.23.708.4
ROM Date 07/24/06
Radio 1.06.00.10
Comm Protocol 32.37.7010.01W
Please advise if it is safe to run HARDSPL for upgrading to WM6.
Will there be any adverse/damaging effect?
Do I need to downgrade the ROM version before running HARDSPL V7.
Please advise the procedure.
Thank you in advance
Ken
Isi
I believe you can just put it into bootloader mode and flash the WM6 Dopod ROM. A friend of mine did this recently.
i hv just done it. i did not encounter any major problem except after flashing it with the official ROM, the storage memory is very low ....
KENPPCPHONE said:
Please find below the infomation of my softbank X01HT which I bought few days ago. The softbank has been unlocked by the shop and is running traditional Chinese on WM5.
IPL 1.01
SPL 1.09
ROM Ver 1.23.708.4
ROM Date 07/24/06
Radio 1.06.00.10
Comm Protocol 32.37.7010.01W
Please advise if it is safe to run HARDSPL for upgrading to WM6.
Will there be any adverse/damaging effect?
Do I need to downgrade the ROM version before running HARDSPL V7.
Please advise the procedure.
Thank you in advance
Ken
Isi
Click to expand...
Click to collapse
yes it is safe... but you need an activesync partner ship setup to installl HardSPL as it needs to push SSPL to your device... for more information read www.mrvanx.org
Zilch said:
I believe you can just put it into bootloader mode and flash the WM6 Dopod ROM. A friend of mine did this recently.
Click to expand...
Click to collapse
with updating/installing HardSPL the device needs to be in Windows with activesync connected so SSPL can be pushed to the device...
I trid to install HardSPL Version 7 (2.10.olipro).
I activesync connected and run RUUWraper.exe
I go through all the selection right and on the last page after I click "next" I press yes on my Softbank. but the flash download didn't started and the Softbank reset and go into the engineering mode where I still see :
IPL- SSPL Des
SPL-1.09.ds
All my versions are the same as Ken which are:
IPL 1.01
SPL 1.09
ROM Ver 1.23.708.4
ROM Date 07/24/06
Radio 1.06.00.10
Comm Protocol 32.37.7010.01W
Could anyone advise any solution in proceed with HardSPL installation?
Thanks a lot
Henry
Hi Conorau,
Following the procedure in this forum, my softbank successfully upgrade to WM6 without any problem. Good luck
Ken
IPL 1.04
SPL 2.10.01 olipro
ROM Ver 3.54.708.2
ROM Date 07/05/07
Radio 1.47.00.10
Comm Protocol 32.80.7020.20H
here is solution
I think it usefull !
http://bestsolution.spaces.live.com/Blog/cns!E39312F16E0FBE41!728.entry
and more infomation http://forum.xda-developers.com/forumdisplay.php?f=355
KEN can you tell me exectly what you did? i also want to upgrade my phone
is it ok for my phone to to according to this FAQhttp://wiki.xda-developers.com/index.php?pagename=Hermes_UpgradeGuide + take this ROM http://forum.xda-developers.com/showthread.php?t=321332
please help!

Wm5 Degrading Help

I Know i am being noobish,but to learn more i need to put questions like this to you guys.Hope that i will get sufficient help from you guys.
I need to downgrade to imate full shipped wm5 rom for some reason.I have selected the rom i wish to download.
i-mate English CDL__001 1.31.305.2 09/08/06 1.31.305.104 1.38.30.10 32.71.7020.12H 14955.2.3.0 2.3 1.11 108
I am currently using Olipro Hard spl V7 with TnT rom and 1.54 radio varient.
I wish to do full degrade,rom as well as radio.
Any Body guide me through this tricky process,i consulted mr.vanx guides but that degrades only the os part but i want a full degrade.
mrvanx's guide for downgrad is quite straightforward. If you look at it, you should understand that by dowgrading 2.10.Olipro to 1.10.Olipro, you will have a base which will allow itself to be downgraded to shipped SPL. Forget doing anything with radio or OS at this point, you don't need to.
AFTER you have 1.10.Olipro visualy CONFIRMED on the BL screen, flash your desired ROM. Make sure, your radio BL is 108 ( which it seems).
OK ,
1- I should degrade 2.10 olipro to 1.10 olipro
2-I just flash the shipped wm5 rom i downloaded
Am i right?
max414 said:
OK ,
1- I should degrade 2.10 olipro to 1.10 olipro
2-I just flash the shipped wm5 rom i downloaded
Am i right?
Click to expand...
Click to collapse
That will do it.
Will that degrade my radio as well as spl?
max414 said:
Will that degrade my radio as well as spl?
Click to expand...
Click to collapse
It will. Just make sure that the radio BL version is the same (108 I believe). From other posts and Wiki, you can read that you can downgrade radio BL from 108 to 107 but NOT BELOW THAT. Or you will brick your phone. So I would recomend staying with BL 108. Anything up from 1.33 based on the wiki list.
rronge said:
It will. Just make sure that the radio BL version is the same (108 I believe). From other posts and Wiki, you can read that you can downgrade radio BL from 108 to 107 but NOT BELOW THAT. Or you will brick your phone. So I would recomend staying with BL 108. Anything up from 1.33 based on the wiki list.
Click to expand...
Click to collapse
Will 1.10 olipro do the job?or do i need to degrade to retail spl like spl 1.04 or spl 1.06?As stated here...
http://www.mrvanx.org/cms/index.php?option=com_content&task=view&id=59&Itemid=27
max414 said:
Will 1.10 olipro do the job?or do i need to degrade to retail spl like spl 1.04 or spl 1.06?As stated here...
http://www.mrvanx.org/cms/index.php?option=com_content&task=view&id=59&Itemid=27
Click to expand...
Click to collapse
As I said in post #2, you don't need to. Flashing shipped on top of 1.10.Olipro WILL reflash the SPL! Read it again.

downgrade rom on htc hd2 leo?

Hello, i have an htc hd2 phone with ROM 1.72.111.4. I am flashing HSPL2 ON IT.. i need to know if i can downgrade the version after that to 1.66? Please someone advise..
Thank you
Yes you can downgrade the rom to 1.66.
Thanks for your reply, just one more question. After flashing HSPL2 on my htc hd2 phone with ROM 1.72.111.4, i downgraded the version after that to 1.66? Now, i need french language, so can i now flash the phone with ROM 1.48.406 which has french language in it?
so long as hspl is still installed, and you only use usb to flash, you can flash any hd2 rom, any, including all of them.
upgrade downgrade change language, all stock roms, all tmous roms, all cooked roms.
fill your boots!
oh, and no need to keep changing hspl versions when you flash.
run hspl2, choose 2.08.hspl and then just leave it at that.
Ok, thanks for your reply, so you mean to say that after flashing hspl once i can upgrade, downgrade or flash any rom through usb without the need to flash hspl again. By the way select 1.42 hspl while flashing hspl...is that cool?
lakshi said:
Ok, thanks for your reply, so you mean to say that after flashing hspl once i can upgrade, downgrade or flash any rom through usb without the need to flash hspl again. By the way select 1.42 hspl while flashing hspl...is that cool?
Click to expand...
Click to collapse
sure , 1.42.hspl will work. ANd yes, you only need to flash hspl once. It will stay there until you either
1 - flash a stock rom from sd card
or
2 - run hspl2 and choose 1.42.0000 (or any other spl ending in 0000)
how to get a rom on hd2
hi i have an HD2 i want to put a different ROM but it says in order to install HSPL it has to be in SPL 1.42.0000 if not it will fail. my phone is on SPL 2.10.0000 i never done anything on it well am not all that technology smart but am tired of the same look. can some one give me some tutorial on how to get HSPL and how to install a new ROM. (make it for DUMMIES) . thanks in advanced.
acolon85 said:
hi i have an HD2 i want to put a different ROM but it says in order to install HSPL it has to be in SPL 1.42.0000
Click to expand...
Click to collapse
thats wrong/old. Use hspl3, choose 2.08.hspl then flash your chosen rom.
samsamuel said:
thats wrong/old. Use hspl3, choose 2.08.hspl then flash your chosen rom.
Click to expand...
Click to collapse
Hi Samsamuel,
I have the same problem. I am a new HTC HD2 user. I want flash but my spl version is 1.67. So what can I do? How can I downgrade change my spl version to install hspl.
OS:5.2.21895
Manila:2.5.20151725
ROM: 1.80.911.2 (94312) kor
SPL: 1.67
Radio: 2.10.50.28_2
U.cagri dogan said:
Hi Samsamuel,
I have the same problem. I am a new HTC HD2 user. I want flash but my spl version is 1.67. So what can I do? How can I downgrade change my spl version to install hspl.
OS:5.2.21895
Manila:2.5.20151725
ROM: 1.80.911.2 (94312) kor
SPL: 1.67
Radio: 2.10.50.28_2
Click to expand...
Click to collapse
use hspl3, see link in my sig. it supports all spl versions.
choose 2.08.hspl then you can use any rom.
HSLP3_PKG Don't support SPL-1.76.0000 HELP!!!
Manila:2.5.20151725
ROM: 1.80.911.2 (94312) kor
SPL: 1.67 0000
Radio: 2.10.50.28_2
acolon85 said:
hi i have an HD2 i want to put a different ROM but it says in order to install HSPL it has to be in SPL 1.42.0000 if not it will fail. my phone is on SPL 2.10.0000 i never done anything on it well am not all that technology smart but am tired of the same look. can some one give me some tutorial on how to get HSPL and how to install a new ROM. (make it for DUMMIES) . thanks in advanced.
Click to expand...
Click to collapse
Hey I am totally not technology smart either, but once you figure out what everything means it comes really easy, its just a different language. In my Signature you will see a link that says first time tmobile flashers. I used that to walk me through step by step my first flash. If you dont have tmobile there is a link there on the first post that will take you to the other thread for first flash for the non tmobile devices. best of luck!
no way to change the 1.67 spl version
i have tried almost everything and still no luck to downgrade 1.67 to 1.66 so i can use the hspl... is there a way to do it?
Hi Samsamuel,
I am also a completely new user with HTC HD2 with 1.48.406.1 (71294) FRE
When I press the down volume and reset, my spl says : 1.66.hspl XE
How should I go about flashing with a different ROM?
Thanks for your help
Kum
System : 5.2.21869
Rom : 1.48.406.1 (71294) FRE
Manila : 2.5.19211619.0
Radio : 2.05.51.05_2
kumalo said:
When I press the down volume and reset, my spl says : 1.66.hspl XE
How should I go about flashing with a different ROM?
Click to expand...
Click to collapse
it says hspl so hspl is installed, just go ahead and flash. you probably want to get a 50 radio (50 in the version number, where yours says 51)
go to rom development, radios thread, sget something like 2.08.50 or 2.10.50
now flash any rom you like the look of.
use usb flashing. do some reading and away you go. first thread in rom development has links to all the good instructions and what not.
i am trying to download an hspl as well. i am showing spl-2.08.0000 8G XE
i downgraded like i saw you were supposed to do but i still cannot get the HSPL to download. i tried HSPL 2, and HSPL 3?
how can i downgrade my radio version on HTC HD2,
Radio version: 2.15.50.14
need help
I have same problem, I istalled new official rom 3.14..... with 2.15.50 radio, and now I have SPL version about 3.something and ActiveSync won't let me downgrade to 1.66 rom.. I read thousands of threads and didn't find any help..
VojtaMach said:
I have same problem, I istalled new official rom 3.14..... with 2.15.50 radio, and now I have SPL version about 3.something and ActiveSync won't let me downgrade to 1.66 rom.. I read thousands of threads and didn't find any help..
Click to expand...
Click to collapse
your correct stock rom, if flashed over usb, WILL downgrade rom radio and spl.
if it fails, its the wrong rom.
I have the same issue and I tried all the ofiicial roms avaliable with no luck. my serial number is HT9BENW01791

[Q] Downgrade SPL 5.13.2250.1 with ansar

Hello i have HTC_Europe 401 and SPL 5.13.2250.1
Can i try Downgrade with SLSPL 5.11.401.xxxx* from ansar?
I cry becouse i flash orginal flash 5.13 without file SPL_Singed.nbh, but my HSPL change to SPL 5.13.2250.1
I don't now how can i downgrade my SPL Help me
Regards
OK i use ROM SLSPL 5.11.2250.1 by ansar and i flash. I have error after 100% but i see in my mobile SPL 1.28.2250.3 and speed flash ROM to SPL 1.28.2250.4. Now have HSPL and CFW
Topic Resolved.

Categories

Resources