I have a t-mobile vario II. After upgrade rom, it says noGSM and stuck in windows screen. I can't upgrade another rom because of the boot loader now is 1.06. Anyone can help me or give me the t-mobile rom??please help me!!!!!!!!!
Mail:[email protected]
flash back to your original rom that should fix it
original rom will not fix it.
see wiki upgrading problems: (problem 5)
http://wiki.xda-developers.com/index.php?pagename=Hermes_UpgradeProblems
Please provide usb monitor capture if you want help. Otherwise send it to service centre.
help!!!
Not original rom for T-mobile, because T-mobile not find Rom, please share rom, because up to boot loader 1.04 from micro Sd erro and not alow, because check CID, please help to down boot loader 1.04, please help not check CID.Help me, It die.
Please help run dump rom, files .raw, I'm not understan.
I Attach files from usb monitor, please help me.
thanks a lot
files, rename file, delete .txt and unzip
thanks all
This is wrong caputre: you captured from USB Mass storage device, you have to capture from HTC USB Sync.
Not alow!!!hu hu
I try up rom(imate, dopod, cingular,o2,... and HER_ORRO_123702_1060400_WWE_SHIP.exe,) but "not alow" and 0028002. I'm never search rom for T-mobile (MDA vario II), please share or link rom for T-mobile boot loader 1.04. Help me,....
files. I try:
+ Up Rom(imate, cingular,.....)
+ wiki upgrading problems: (problem 5)
http://wiki.xda-developers.com/index...pgradeProblems
USB> password 0000000000000000
USB> set 1e 1
USB> erase a0040000 c80000
USB> erase a0cc0000 c80000
USB> erase a1940000 640000
USB> set 1e 0
+ Up from Micro SD
+ 1. Go to Google, search for DownGrade_SPL.rar
2. Connect your tytn to PC and wait until activesync completed.
3. Run M3100v3cUnlock.exe. Once you see checking device.... in DOS box and whilte screen on your tytn, close the program (Dos box) immedaitely.
4. Run ROMUpgradeUt.exe and follow the japanese wizard to complete the boot loader downgrade.
===> not conec ==> check sum....
======> but, not alow. because check CID, I thinks need rom T-mobile for MDA Vario II
Help Me!!!
Again, the attached rar file contains usb capture from usb storage device (pen drive, or sd card reader or camera... ) you need to select HTC device connected to USB port... no other.
files, blank, help
funtigers, either the capture is not well done, or the device is not responding at all to usb commands. Sorry to say that, but I guess you should send your device to service centre for repair.
Related
Have tried all sorts and still cannot boot after using the wrong sim unlock.
Have tried doing hard reset and then soft reset instead of spacebar, it still did not boot.
MTTY command set 14 0 and soft reset made no difference.
Tried the SD card method but it didn't work as Orange have not relesed an ugrade yet (Jan 2007 I've heard) CID is ORANG001.
Trying to reflash with any other ROM I either get connetion error or non compatability error. Using USB Monitor shows no results although MTTY commands do show up.
Is there any way I can reflash with original ROM? I have access to a locked SPV M3100, could this help in any way?
When phone tries to boot it shows:
M05
S04
B05
No GSM
D 1.23
I know the radio part is screwed and have tried to flash radio only, nothing happened and nothing showed in USB Monitor.
Even tried method used by Kimbay http://forum.xda-developers.com/showthread.php?t=280228 this also had no effect.
Hoping someone somewhere can help, I know quite a few people are in the same situation and if a solution can be found will help others if I can.
Thanks to pof who has already given me some advice, sadly none of it worked.
I have a similar problem as you, and i have tried everything, my last test will be when I get an original rom for my device that matches my CID.
There is no date for my original rom to be delivered so I have to wait.
rachelm700 said:
Trying to reflash with any other ROM I either get connetion error or non compatability error. Using USB Monitor shows no results although MTTY commands do show up.
Is there any way I can reflash with original ROM? I have access to a locked SPV M3100, could this help in any way?
...
I know the radio part is screwed and have tried to flash radio only, nothing happened and nothing showed in USB Monitor.
Click to expand...
Click to collapse
Had the same problems as you, This is how I repaired it:
http://forum.xda-developers.com/showthread.php?t=280425
Houz74 - Tried your method, never got past the white screen. Will keep trying.
I tried this, but as I don't have an original rom and being on bootloader 1.06.
Its not a big problem as I have 2 tytn, one to play and one for proper use.
rachelm700 said:
Houz74 - Tried your method, never got past the white screen. Will keep trying.
Click to expand...
Click to collapse
Didn't work for me in one time too, had to reset both my phone and my pc for it.
After which step do you get the white screen ?
You could try this ROM:
ftp://xda:[email protected]/Himalaya/ROM166/RUU166223WWE.exe
Use it til just after the erasing part of the upgrade.
You have bootloader 1.04 ? Otherwise this method doesn't work
Houz74 said:
Didn't work for me in one time too, had to reset both my phone and my pc for it.
After which step do you get the white screen ?
You could try this ROM:
ftp://xda:[email protected]/Himalaya/ROM166/RUU166223WWE.exe
Use it til just after the erasing part of the upgrade.
You have bootloader 1.04 ? Otherwise this method doesn't work
Click to expand...
Click to collapse
Bootloader version is 1.04
Tried above method, results below:
1. Welcome to the Pocket PC software upgrade utility.
2. Checking the information on your pocket PC... Please wait...
SCREEN GOES WHITE AT THIS STAGE
3. update screen:
CE image version 1.66.00
Extended image version 1.66.223
Radio image version 1.10.00
4. Checking
5. The current sofware is being erased from your Pocket PC.
Even if left for over an hour this stays at 0%
I got the same results with RUU120_172125_Qtek_WWE_R11400_Shipping but obviously the update screen shows different CE Image Version etc.
Sorry for the lengthy reply but wanted to show as much info as possible. Have tried both ROMs many times and hangs at the same stage every time.
rachelm700 said:
I got the same results with RUU120_172125_Qtek_WWE_R11400_Shipping but obviously the update screen shows different CE Image Version etc.
Sorry for the lengthy reply but wanted to show as much info as possible. Have tried both ROMs many times and hangs at the same stage every time.
Click to expand...
Click to collapse
Can you do a full USB monitor caputre of the process when trying to put the Himalaya ROM? I explained how to do it here:
http://forum.xda-developers.com/showpost.php?p=1036494&postcount=4
If we don't know 'what goes on through the USB cable' we will not be able to understand why the problem is fixed using this method, and what prevents the erase proces to end in your case.
There are two erase commands in Hermes bootloader 'erase' and 'rerase' (for radio) which take an address and a length as arguments. If you look at what the upgrade tries to do, you can do it manually after from the bootloader.
Hi pof
This is what was captured with USB Monitor, the first is RUU166223WWE
the second is from RUU120_172125_Qtek_WWE_R11400_Shipping
In both cases nothing seemed to show up after the screen which says: The current software is being erased from your Pocket PC - it just hangs at 0% no matter how long it is left.
Not sure which Himalaya ROM you meant so have posted the results from these two for now. Please advise which Himalaya ROM should be run.
rachelm700 said:
Not sure which Himalaya ROM you meant so have posted the results from these two for now. Please advise which Himalaya ROM should be run.
Click to expand...
Click to collapse
The Himalaya ROMs you used are OK, both files show the same output. These are the commands sent to bootloader and my explanation of the process:
Code:
USB> USBPortTest
Command error !!!
This should be Himalay specific, not working on the Hermes bootloader, so it says "command error".
Code:
USB> info 0
USB> info 1
On the Himalaya, "info 0" returns platfrom name (16 bytes) and "info 1" returns bootloader version (16 bytes). On the Hermes these commands return nothing (no output).
Code:
USB> password 0000000000000000
HTCSPass1..CM??HTCE
Himalaya RUU sends "password 0000000000000000", on the hermes this password is dynamic and the RUU should issue "info 3" command first to calculate the password, but as "info 3" has not been issued yet the Hermes bootloader returns Pass1 encapsulated in HTCS/HTCE block, which is the output when the password is valid!!!
Code:
USB> set 1 0
USB> set 6 ffff
USB> set 2 1
USB> set 5 F800
These commands are the same in the Himalaya and in the Hermes:
- "set 1 0" sets the operation mode to user which makes the other commands return more friendly values
- "set 6 ffff" changes the screen color to FFFF
- "set 2 1" change back color on
- "set 5 f800" changes background color to F800
Code:
USB> info 2
This should return the CID on the Hermes, but it does not ... I don't know what it does on Himalaya. As I see no output from your Hermes here, I guess the proces has already stopped, so the following commands sent by the RUU will not work.
Code:
USB> set 1e 1
This unlocks the read/write flag, should be always done before flashing. (when the flash process ends, it should be done the oposite: "set 1e 0").
Code:
USB> rbmc Temp.txt 70010000 28
This reads 28 bytes of memory starting from addres 0x70010000 and saves the read data to Temp.txt file.
I don't know what there is on this memory address (anyone?), but I guess it's himalaya's specific.
The "juicy" commands will come after this one, but your hermes doesn't seem to pass from here. Luckily I found on buzzdev.net the Himalaya upgrading process, which shows exactly the same process as I can see in your attached files, so the following that should come here if your Hermes was still alive is this:
Code:
USB> erase a0040000 c80000
USB> erase a0cc0000 c80000
USB> erase a1940000 640000
USB> set 1e 1
USB> wdata a0040000 20000
The last 'wdata' command will not work on the hermes (it uses 'wdatah' instead) so nothing is written on the rom, just erased.
CONCLUSION:
If you feel brave, and always at your own risk, what you should do to fix your bricked hermes with screwed radio is this:
1) Put your Hermes in bootloader mode
2) Disable USB connections in ActiveSync
3) Open mtty.exe and select USB port, then connect.
4) Hit enter twice, you will see the "USB>" prompt.
5) Type the following commands (do not copy paste!!!):
Code:
set 1e 1
erase a0040000 c80000
erase a0cc0000 c80000
erase a1940000 640000
set 1e 0
6) Reset your phone and put it back in bootloader mode
7) Flash the Hermes rom of your choice (if your bootloader is 1.06 it MUST match your CID, if it's 1.04 it isn't important)
Good luck and let us know how it goes!
I think you will need to authenticate to the bootloader before issuing the "erase" commands, otherwise the bootloader won't let you erase.
When you are on "step 5" of the process I described before, if you get an error when issuing the first "erase" command try these commands instead:
First try to use the "Himalaya" method, as it worked for some people:
- in step 5, use these commands:
Code:
password 0000000000000000
set 1e 1
erase a0040000 c80000
erase a0cc0000 c80000
erase a1940000 640000
set 1e 0
If it doesn't let you erase, then you'll have to authenticate to bootloader using the dynamic password.
The attached file will try to authenticate to the bootloader for you, so you don't need to go through all the process described in this PDF, which is a bit tedious. It should be run before you actually open mtty on step 3, when it authenticates sucessfully it should show the message "Entered advanced bootloader", when you see it you can open mtty and follow the next steps. Probably it doesn't work at first try and you have to run TryBootloader.exe several times before it acctually successfully authenticates to the bootloader, but it's better than the process in the pdf
Once you're actually authenticated correctly with TryBootloader.exe, just run the commands in mtty as in step 5, do not use the "password" command again.
Let me know if something is unclear or you need more help.
Yipee, It's back to life, please see new post
http://forum.xda-developers.com/showthread.php?t=280733
1) Put your Hermes in bootloader mode
2) Disable USB connections in ActiveSync
3) Open mtty.exe and select USB port, then connect.
4) Hit enter twice, you will see the "USB>" prompt.
5) Type the following commands (do not copy paste!!!):
Code:
set 1e 1
erase a0040000 c80000
erase a0cc0000 c80000
erase a1940000 640000
set 1e 0
6) Reset your phone and put it back in bootloader mode
7) Flash the Hermes rom of your choice (if your bootloader is 1.06 it MUST match your CID, if it's 1.04 it isn't important)
Dear Prof:
I'm totaly stuck trying to flash it with Qtek 2020 with 0%. Also, noID did not work as it show no radio or other CE version numbers and end with sucessfully completed operation. I would appreciate if you can advise me.
Hi, i want use the mtty but, when i select the usb, the promp file go to the cmd>
dont appear the usb>
hi everybody,
i am very sad today because i tried to unlock my SFR v1605 (french version of hermes) in order to put an orange sim card.
Everything was ok during the flash but at the end of the procedure i get an error message.
Since them, i can't flash it again, everytime i have an error message.
I have tried a lot of roms but anyone worked.
what can i do now
please help me,
Sorry for my bad english, i tried to do my best to be understood
Thanks
Read "Problem 5: Device shows NO GSM when booting" on the Common Upgrading Problems in HTC Hermes wiki page. Solution is there for you
i've read it but i don't know what rom i have to choose.
i am trying to flash with RUU172541FRA_SFR rom
but the screen of my pda is whit and i wait, i wait.0.. nothing's happen
The Himaupgrade software said
'the current software is now being erased, etc...)
..
totaly update should take 30 mn.
It is normal that when i want to flash actyvsync is not lauched automaticly?
please tell me what to do
on a french forum other guys have the same probleme and i want to help them, and help myself of course.
But now anyone have found the exact procedure to bring the pda alive
I put the instructions on the WIKI: Hermes_UpgradeProblems
A lot of people is having the same problem (you'll see NO GSM when booting), yesterday we found how to fix it:
1. Disable activesync on your computer by right click on activesync icon -> connection settings -> uncheck "allow USB connections".
2. Put your Hermes in bootloader mode
3. Connect device to computer using USB cable.
4. Open mtty.exe and select USB port, then connect.
5. Hit enter twice, you will see the "USB>" prompt.
6. Type the following commands (do not copy paste!!!)
Code:
USB> password 0000000000000000
USB> set 1e 1
USB> erase a0040000 c80000
USB> erase a0cc0000 c80000
USB> erase a1940000 640000
USB> set 1e 0
7. Reset your phone and put it back in bootloader mode
8. Flash the extracted radio ROM of your choice
Click to expand...
Click to collapse
Tanks you very much pof for you help
i am trying it
i will give you news as soon as i have results
my config
SFR v1605 - Herm200 - rom 1.23.163.3
what rom i have to choose?
my keybord is azerty?
ptiga100gene said:
my config
SFR v1605 - Herm200 - rom 1.23.163.3
what rom i have to choose?
my keybord is azerty?
Click to expand...
Click to collapse
you have to choose a radio rom only, it doesn't matter which one.
I have this message
checking information from your device
and it's very long....
that's is normal?
ptiga100gene said:
I have this message
checking information from your device
and it's very long....
that's is normal?
Click to expand...
Click to collapse
please read the wiki and the posts linked there it's all explained, i have no time now sorry
thanks for the time you spent for me
i respect all the procedure, but nothing.
i will try gain and again
if someone can help me
my msn
[email protected]
i have not find a solution
Does a rom exist for my french herm200 (sfr v1605) 1.04 azerty?
please help me
hello to all
need some help in jasjam now in bootloader mood (3 cloure screen)
when flash any wam stop in (10 - 11 - 12%) and need recovery and stay in same situation
what steps can i do to repaire my phone
need help plz
thx in advance
regards melmel
Ipl 1.04
Spl-1.40.0lipro
My Device Not Start Just Boot Loader Mood Need Help Plz
Thx
You must provide more information about your device:
what is ur previous ROM?
what is the ROM that u tried to upgrade with?
did you CID Unlocked ur device before upgrading (Hardspl)?
What is your current IPL & SPL?
do u have NO GSM error?
BTW, you should read the WIKI first!!!!!!
the proplem was that phone had no gsm
i tried alot to write radio or any wam contain radio but always failed
error and not start
it make hard spl v7 and it maked succefuly in 1 second and now phone open only boot loader not done any thing more
just boot loader mood
plz any steps
thx to all
why no one posting help plz
i wanna revive my phone
DUDE!
you cannot hardspl via bootloader.
DID you read the wiki on how to unbrick ur hermes : http://wiki.xda-developers.com/index.php?pagename=Hermes_Unbrick
Please follow the following steps to revive your Hermes:
1- Close the USB port on the activesync.
2- open the program MTTY (you can find it within this forum) and connect your Hermes using USB.
3- inside MTTY give this command:
task 32
if the answer is FF this means your Hermes is locked and you can go on with the steps.
now give this command in MTTY
set 16 0
the answer will be (NAND WRITE SUCCESS).
4- Disconnect your Hermes from the PC.
5- Format your micro SD card with FAT16.
6- Download the official JASJAM ROM (JASJAM_WWE_1.20.305.104.zip) and extract the file hermimg_wwe_1.20.305.104.nbh and rename it to hermimg.nbh
7-Put the file hermimg.nbh on your micro SD card and inser the card into your Hermes.
8- Reboot your Hermes and it will start the command Download, in this case press the power button to continue.
The operation will take about 20 mints to finish, if it hangs do a reset and repeat step 8.
keep repeating step 8 until the operation ends with a success.
Regards.
i open active sync
from file/connection setting/(unmark) allow usb connection
and mark on allow the connection from com 1
then opem mtty.exe
but i can't write any liter
sory cause it's the firist time to use mtty.exe and can't write commands
thx to all for replies
but need to done this plz help
I try to flash rom ENG to my NIKi
my version is 1.31.406
I read post "Nike SSPL, USPL and HardSPL" by jockyw2001
1. download the attached files
2. REMOVE SIM and SD CARDS !!
3. connect usb cable
4. copy sspl-1.16-nike.exe to your device and run it (usb cable must be connected!)
5. after a few seconds "USB" appears on the display
6. unplug and replug the usb cable
8. you can now flash the hardspl-1.15mfg-nike.nbh by running ROMUpdateUtility.exe from flash-uspl-niki
******* but it's still 0% and still boot loader screen*****
I Hard reset my NIKI but still bootloader and show
NIKI100
SPL-1.16.0000
CPLD-4
I try to flash this rom "RUU_Nike_HTC_WWE_1[1].13.405.01_Radio_Nike_1.58.11.07_signed_Test.exe"
It's 1% only and report error 262
"ERROR [262, 276, 284, 302] : UPDATE ERROR
This error occurs during the CE ROM code upgrade process.
Solution: If this happens, you can just soft-reset the device and run RUU again. The update process will then continue."
How to repair this
in post "http://forum.xda-developers.com/showthread.php?t=387217" by NetrunnerAT
"1. Download MTTY and connect via USB (dont forget do disable Activ Sync!!) us command Boot, to force a OS Boot!
2. After OS is Started ... Download SSPL and Copy it to your Phone ... please remove SD Card and SIM ... Start this Program!
3. Now you are in the Bootloader but it tells something about SPL 1.16Jump ... now you can Flash Hard SPL!!! If you doesnt see 1.16Jump you CAN'T Flash HardSPL!!
4. Now you can Flash my Dumped TIM Rom!!! "
I try this It show log
"boot
Fill RSVD information for block 288 to 309
Storage start sector=0xAF00, total sector=0x103C0
Storage start block=721, total block=1039
Total Bad Block in CE: 0
Erase physical block from 1011 to 2032
si backup: Erase physical block from 2032 to 2048
Card inserted
SDHW_EnablePowerOn
SDHW_ConfigGPIO
Cmd5 CMD_TIMEOUT
Cmd8 CMD_TIMEOUT
SD Init OK
SDFATChkConf: RhOpenFile() failed NIKECONF.txt
OEMGetUpdateMode
OEMTranslateBaseAddress 23 80000000 80000000
IPLMSG:0x8:INFO: Loading image ...
IPLMSG:0x9:INFO: Jumping to image...
OEMLaunchImage 80000000
Jump to Physical Address 10300000"
and still boot loader
how to fix it's
Thank' for reply
Please tell us ... what you have done before ... step by step!!!!
If you stay in the Bootloader and MTTY "boot" doesnt work, try the oemsbl with the command "cego"
NEXT ... what NIKI you have? German? UK? TIM? Vodovone branded?
You tell us not enough, too help you!
NetrunnerAT said:
Please tell us ... what you have done before ... step by step!!!!
If you stay in the Bootloader and MTTY "boot" doesnt work, try the oemsbl with the command "cego"
NEXT ... what NIKI you have? German? UK? TIM? Vodovone branded?
You tell us not enough, too help you!
Click to expand...
Click to collapse
Sorry For My Eng = =' I'm Thai girl.
I can't Remember lang before flash becouse I don't Know ^ ^ GER or Italy or Rus Lang
It's Not Eng Lang not Vodafone Brand
I'm new bie for this model . I have Dopod 818 pro It's Easy to flash I think Niki Is same
command "cego" notwork
Can I reflash any Office Rom?
What is SPL-1.16.0000 mean It's Hard SPL,SSPL or USPL
I Try to Put camera button and power button
and Use Mtty
boot
InitDisplay: Display_Chip=1
Card inserted
SDHW_EnablePowerOn
SDHW_ConfigGPIO
Cmd5 CMD_TIMEOUT
Cmd8 CMD_TIMEOUT
SD Init OK
SDFATChkConf: RhOpenFile() failed NIKECONF.txt
OSSIReadBack ++
Read SI data from flash success
tail signature match
Checksum match
UserStorageSIPreload ++
My NIKI Can boot and Use Now
I don't Know what Lang
" A Propos de
Windows Mobile 6 Profesional
Processeur : MSM7200-400Mhz
Memorie :101.67 Mo
Conecteur d'ext. :En cours d'utilisation
Informations de L'appareil
Version de Rom :1.31.406.09
Date de Rom :10/30/07
Version de Radio 1.58.16.27
Version de prot.. 25.61.30.03w
Is lang France?
@^ ^@
Hoorayyyyyyy
My phone is back
many thank's for NetrunnerAT
1. Download MTTY and connect via USB (dont forget do disable Activ Sync!!) us command Boot, to force a OS Boot!
2. After OS is Started ... Download SSPL and Copy it to your Phone ... please remove SD Card and SIM ... Start this Program!
3. Now you are in the Bootloader but it tells something about SPL 1.16Jump ... now you can Flash Hard SPL!!! If you doesnt see 1.16Jump you CAN'T Flash HardSPL!!
4. Now you can Flash my Dumped TIM Rom!!! "
and Now I Use rom TOM_Niki-Project_WM6[1].1_WWE_16keys_signed_Ship.exe
Many many Thank For XDA - Developers
http://www.pdamobiz.com/ <- its a Thai PDA Board!
The most errors on HTC Niki are simulare with HTC Polaris and HTC Kaiser!!!
I hope this helps!
my touch dual is lock at 3 color mode
Sorry for my english....
My niki is locked afther flash for unlock it (supercid)
I've tried to install a sspl and hardspl, but all have crashed at 95%
I've tried to install hardspl renaming the file nbh in NIKEIMG.nbh from sd, but this procedure have only send me message: loading......... and nothing all.....
At this moment my niki is stopped at 3 colors mode
Have you any idea for help me?
Many thanks to all
don't have any idea for help me?
i can use my niki for stop my door?
thanks
Works very well
This really helps me out!!!! Thanks to NetrunnerAT.
but the site is in thai language
after unlock my athena is dead, go only in bootloader mode with this write:
ATHE100
IPL-1.00
ATHE100
SPL-v1.10.RP00
ALL ROM NOT RUN, CAN NOT CHANGE SPL,
I HAVE TRIED AND ORIGINAL ROM version hangs 1% WITH THE WRITTEN "INVALID ID .."
PLEASE HELP ME
GORGOMED
Don't worry, it happens all the time. Just follow the procedure of "How to fix the invalid model ID after bad flashing" step by step as described in the following page:
http://forum.xda-developers.com/showthread.php?t=405814
Good luck!
hi,i make this procedure ,but replay of the athena is this:
Cmd>task 32
Wait interpreter timeout
Level = FF
have read in some post ,when reply is FF is because SPL is original ,in fact my SPL is 1.10.RP00 not 1.12 olinex or olipro ,i needed how do I change only SPL and make open to Athena for upgrade rom.
tnx
RE HELP
I'm trying to put the original ROM, 1% BUT STOPS AND WRITE ERROR VENDOR ID "mtty DO THE PROCEDURE, BUT I DO NOT TO" LEVEL 0 "MA" LEVEL FF "AND I CAN NOT PUT THE MAC LIKE GOING FORWARD?
TNX
please help me
who is help me!!
tnx
nessuno parla italiano e mi fa capire che devo fare
giusto ,chi sa che devo fare?
Maybe this?
gorgomed said:
after unlock my athena is dead, go only in bootloader mode with this write:
ATHE100
IPL-1.00
ATHE100
SPL-v1.10.RP00
ALL ROM NOT RUN, CAN NOT CHANGE SPL,
I HAVE TRIED AND ORIGINAL ROM version hangs 1% WITH THE WRITTEN "INVALID ID .."
PLEASE HELP ME
GORGOMED
Click to expand...
Click to collapse
Try this...I do not know if you need to reset your MAC address...
http://forum.xda-developers.com/showthread.php?t=387454&highlight=mtty&page=4
I had this once and I needed a new MAC address....you can get it from any unused wireless device.
i make this procedure 100 times,but also write up :
STEP BY STEP:
1. download attachment at the end of the post for mac1.exe (requires .net 2.0 installed on the PC)
2. you will also need to download the other attachment in this post for the mtty program.
3. enter bootloader (tricolour screen) manually by pressing and holding camera button all the way in (yes I mean that, press it in as hard as you can!!), while doing a reset, then keep the camera button held until you see the tricolour screen.
4. disable USB in activesync (wmdc if you have vista - in this case, do not kill wmdc, just disable usb in it!!!)
5. run mtty and select USB option from the dropdown box!
6. then press enter in main window that comes up, see if that gives you Cmd>
7. now you should have Cmd>, if not, re-check if you did the above steps right until you get Cmd>
8. now run the mac1.exe, type in your MAC address you want to use for the Athena, if you have SPL 3.xx reported on the tricolour screen, then use the button for SPL 3.xx, otherwise if you have SPL 1.xx reported, use button for 1.xx.
9. this should have generated a .bin file for you, copy that bin file in the folder of mtty.
10. now, in mtty, type (do not copypaste!) this command: task 32
11. this should return Level = 0 - MY RETURN NOT LEVEL 00 BUT LEVEL FF
BECAUSE I DO NOT SPL 1.20 OR 3.XX NOT PACHED,THIS MY PROBLEM
I DO NOT CHANGE SPL ,SAY YOU MAKE A SOLUTION?
12. now, you must only do one of the two following commands:
- if you have SPL 3.xx, then type (do not copypaste!!) this command: lnb filename.bin 76508000
(there filename is the name of the .bin file you generated - don't forget to put .bin after filename, as the full name is needed).
- OR, if you have SPL 1.xx, then the command is different (do not copypaste!!): lnbs filename.bin 75108000
(there filename is the name of the .bin file you generated - don't forget to put .bin after filename, as the full name is needed).
When you try to unlock did you use HARDSPL from cmonex? Is the SPL SPL-v1.10.RP00 the ORIGINAL spl of the phone?
** If you DID NOT use HARDSPL YOU WILL GET Level=FF.
** HARDSPL is available here: http://forum.xda-developers.com/showthread.php?t=316846
Just retry HARDSPL. When you gst to boot loader you should see olipro SPL.
If I understand correctly, you made a mistake by not changing SPL in first case. It is not clear what you did to 'unlock" the phone...like you said in the first post what did you do for unlocking? How did you unlock?
The best unlock is HARDSPL>>>
yes,i make procedure but in the end athena is blocked,with up writing,now not run ,only reset and bootloader,do not have SPL 1.20 olipro ,not have MAC ,if i writing new ROM also original ,reply "invalid vendor".
Now i make AthenaWrapper but end write this"
ERROR 300 INVALID UPDATE TOOL.
tnx
What ROM are you trying to flash? I think since it still has the ORIGINAL SPL it will take only the original HTC ROM? Did you try that?
Try this other unlocker also ....it is here: http://forum.xda-developers.com/showthread.php?t=315831
Also, I need some way to text you better than this .....otherwise I can only give one suggestion per day !!!!
x7500
please i have the same problem.
but when a type this Inbs filename.bin 75108000 what must i do after that?
my athena caracteristic are:
ATHE100
IPL-v2.02
ATHE100
SPL-v1.20.Olipro
thank you
try flashing an spl 1.2 rom
readthe guide
http://forum.xda-developers.com/showthread.php?t=429013