Related
I think I'm getting the hang of setting up my SDConfig.txt and provisioning XML file to get my phone close to its as-desired condition after a clean ROM flash. DCD's tip to me about how to compare a before/after registry was most helpful. My question now is on the two procedures I'm finding the most difficult (or at least the most difficult to have confidence in the result).
First, I use HTC Home v2.1 along with Home Customizer v1.0final but would like my phone to come up with each of these completely configured as my phone currently stands. That means the correct tabs activated, the correct contact photos in the contact tab, apps in the launcher tab, custom weather cities, custom icons and so forth. I'd like these same settings to be reflected in the HHC app as well so that the next time I launch it to perform future customizations, it's in synch with the way I UC-Configured my HTC Home. I have the registry settings in hand from a before/after compare. However, I'm not sure which folders/files I should capture and then copy over to the phone in my provisioning file. If anyone can point me toward this info, I'd appreciate it.
Second part of this question is similar but for my Opera Mini v4.1 installation (using the JBed midlet manager). Is it possible to pre-install this via UC Config by just copying over the contents of \windows\appdb (I'm going from memory here) and whatever registry keys show up in the before/after comparison? Or are there other files elsewhere to worry about?
I'm looking forward to the day when a firmware update or hard reset appears to disturb none of my apps or system settings beyond clearing the PDA data and thus requiring a simple ActiveSync (and perhaps a *228 dial-in to Verizon).
WMDreamRemote (WMDR) - with streaming
UPDATE (22/04/2012): No more deadlines. The reason is that I am busy with other projects. I might implement other features in future. You can download from my web-site, http://www.tillekesoft.com. There you can find as usual two versions. One version is for devices using 320x240 but it should work fine also with devices having a resolution of 640x480. For all other resolutions, please use the other one. For existing users, you just need to replace the old executable with the new one.
06/10/2010 - I have attached a "step-by-step"-guide for setting up WMDR - in particular what regards streaming (it is in English but you can use Google Translation-tools to translate it to another language). Hopefully, this will make it easier for new users to get WMDR working.
IMPORTANT (22/06/2010) - I just tested the new version of VLC no. 1.1.0 and it seems like WMDR is not compatibile with the latest version of VLC. So if you want to use WMDR, please ensure to use VLC 1.0.5 or earlier until I have resolved this issue.
Change-log: nothing so I am leaving old change-log here below:
This version is more like a Service-Release fixing some bugs and introducing few new features:
-fixed issue when using WMDR with Enigma2 outside your LocalLAN where WMDR passed on a DynDNS-address to the Dreambox instead of LocalIP-address which is the correct way. Thanks to mkbm for finding this bug.
-fixed streaming-issue in Enigma2 when changing between channels located on different transpoders would cause problems. Thanks to mkbm for explaining this.
-improved error-handling (clearer messages). Still to be improved further.
-possibility to kill stream when exiting WMDR
-other minor bug-fixes
-some optimization
-added a program-icon (it's very basic - if you can come up with a better-looking icon, please do so and post it here in the thread)
-fixed issue with DM8000
To see WMDR in action (using a pre-release of Beta 0.7), watch this video posted by XDA-user ajocius on YouTube:
Background: After on-going discussions in this thread http://forum.xda-developers.com/showthread.php?t=616353 regarding an application to control remotely the Dreambox, I decided to write an application to accomplish this request.
In above thread, a very simple and crude beta-application was posted. Now, the application has evolved further and therefore I reckoned it was more appropriate to open a new thread in this area which is meant for Window Mobile applications.
Extra Information: The Dreambox is a series of Linux-powered DVB satellite, terrestrial and cable digital television receivers (set-top box), produced by German multimedia vendor Dream Multimedia. It's "kind of" of open-source which has led many "teams" to develop so called "images" for this receiver as an alternative to the original one furnished by Dream Multimedia. In addition, many other hardware manufactures have produced their own receivers (some of them are actually clones while others are not) using the same concept of the Dreambox i.e. Linux-powered. The Dreambox has evolved during the years and many models are present on the market. The first ones are/were using a firmware called "Enigma" but, more or less, with the introduction of High Definition TV, a new firmware was released, namely "Enigma2". One of the "revolutionary" features of the Dreambox was that you can connect it to your local network and this opened up a whole new word compared to ordinary satellite-receivers. To get further information, just google for Dreambox or look it up at Wikipedia.
Background for the application: You can read the original thread mentioned above to get an idea why people wanted an application like the one I am releasing. In a few words: since you can access the Dreambox (or any other satellite-receiver based on Enigma or Enigma2) through your local network or through Internet, there are many things you can do remotely (at work for instance) such as handling timer-events, read EPG etc. The ideal way of doing it, especially if you don't have access to a PC, is to use a handheld device. It was brought to our attention, that there are plenty of applications to do what mentioned above already available for download on the Appstore for iPhone.
for instance:
http://appspace.com/apps/view/38502/idreamremote/
http://appspace.com/apps/view/40338/dreamon/
So, it was suggested to write a similar application for Windows Mobile. And here it is, still in beta although with quite a lot of features implemented, even Streaming-support.
Current Features:
-Streaming
-Remote Control
-Bouquets-/Channels-lists from where you can:
1) change channel
2) view EPG
3) set timers
-Controlling the receiver (Shutdown, Reboot etc)
-Supports set-up of multiple profiles (e.g. At work, home, bedroom)
-Supports set-up of multiple streaming-profiles (Local LAN, WLAN, mobile)
Known issues:
-is not compatible yet with old WebIf (1st generation) of Enigma2
-there might be some problems with certain characters not appearing correctly (please report if you have this problem)
-in 320x240 version when setting up Enigma-profiles, you might need to click twice in the various textboxes.
Features to implement in upcoming versions (not necessarily in this order):
- SMS (Send shortmessages to the TV-Screen)
- improve error handling further
- other ideas/stuff
- user-suggestions (your feedback for improvements)
- re-design the remote-control using png-images instead of jpg which should make the application a bit smaller (and require less memory)
- resolving above mentioned issues
- other bug-fixes
- support for other receivers - requests I have received are for D-box2 and IPBox HD (non Enigma)
- cosmetic issues
- Https (SSL) support. (tested and working but needs a specific hotfix-version of CF.NET (published by Microsoft) due to a bug in CF.NET)
Requirements:
-Compact Net Framework (2.0 should be sufficient)
-an Enigma-based receiver such as the Dreambox, IPBox etc..
-for streaming, please see second post below
Installation:
Note: I have not made any CAB-file.
Note2: If you want to keep your old settings and streaming-profiles, you may do so. Just replace the old WMDreamRemote.exe with the new one.
1) download the zip-file attached to this post and extract the files on your computer.
2) Copy the files into a directory of your choice on your device (internal or
storage). The files must be in the same directory.
3) Run WMDreamRemote.exe. The first time, you will get a message
saying "No connection....".
4) Choose Preferences/Profiles from the main-screen and ADD a new
profile inserting your data. Put the flag on default for the profile you use the most.
5) Then click Save Profile.
6) Go ahead if you wish to add other profiles.
7) You may delete my dummy-profile "home" (only after having added your own though) using
the Del-button. NOTE: It's important that there is always one profile present (with Default selected)
otherwise there might be unexpected errors
8) On the main-screen, you can now use the remote-control by selecting its button
9) You may also see a bouquet/channel list by clicking on its button. However, the first time the list will be empty. Therefore,
10). Go back to Preferences/Profiles and select the profile you want to use. Now select the
button named "Create Bouquets for this profile". This will take a minute or two. It will download
your bouquets and channels from your Dreambox. Do the same for each Profile you create.
11) Now you can scroll your bouquets ad channels.
12) Set up streaming-profiles (3 dummy profiles are provided for Local-LAN, WLAN and mobile) - see second post for more information
There might be some unhandled error-messages occasionally. They are mostly due to connection-problems. Just click on continue and retry unless you have indeed a permanent error with your connection.
Please test it and let me have your error-reports, feedback and suggestions for improvements. Please also indicate which device, Dreambox (or similar receiver) you are using and which image.
I must also express my sincerest thanks to XDA-user ajocius for:
-giving me access to Enigma2,
-his superb beta-testing,
-sharing his knowledge about streaming
-and of course for the great video he posted on YouTube (see above).
I have also attached some screenshots.
PS: ANDROID - Just a note to tell you that I posted here on XDA an Android-application for watching your Dreambox in streaming (LocalLAN and 3G). I called the application AndroidDreamer and you can find the thread here: http://forum.xda-developers.com/showthread.php?t=861145
If you want to test and discuss AndroidDreamer, head over to the thread. Please keep this thread for WMDR.
PS2: WINDOWS - I have published a Windows-version (WinDreamRemote or simply WinDR). You can find it on my web-site: http://www.tillekesoft.com
For discussions regarding WinDR, please use the thread mentioned on my web-site. This thread here at XDA is for WMDR - mobile version. Please respect this.
This is it for the time being.
STREAMING
Streaming works great for me, especially at home (in my Local LAN) but also at work (using WIFI) and even at the supermarket using a mobile-connection (3G) although the quality degrades.
For you, I don't know - Streaming may work, may work so and so or may not work at all.
It depends on a lot of factors:
-For Local-LAN: your WIFI set-up at home (11g, 54g etc)
-For WLAN or mobile: upload/download speed of your Broadband (normally upload-speeds are slower than download-speeds (ADSL)
-Your device
-Your computer acting as VLC-server
-not finding the right configuration in stream-profiles settings
-etc
What you need:
1) VLC (Videolan). Just Google for it and install it on your computer which will act as the VLC-server. I have only tested streaming using VLC running on Windows but it should work on VLC-servers using Linux and MAC as well. If it doesn't, please let me know. I have only tested version 1.0.5 of VLC so I am unable to say if previous versions will work.
UPDATE (22/06/2010) - I just tested the new version of VLC no. 1.1.0 and it seems like WinDR is not compatibile with the latest version of VLC. So if you want to use WinDR, please ensure to use VLC 1.0.5 or earlier until I have resolved this issue.
2) TCPMP (free and which you can find here on XDA) or Coreplayer (not free). Make sure that ASX-files are opened by the program you installed (look in the programs' settings for file-association). Some say that TCPMP is faster to load the stream (5-6 seconds in my Local-LAN) than Coreplayer. On the other hand, some say that Coreplayer is more fluid. The choice is yours.
3) A rather modern and fast device. It might work with slower devices as well but you may have to play a lot with your VLC-configuration (bitrate etc) before you get it to work
4) and of course WMDR
How to set up everything:
1) install VLC on your computer which will act as the VLC (streaming) -server. Then under the menu, select "View" in the English version (not sure since I have it in Italian) and then select "Add Interface" and finally you select "Add Telnet-interface". If you haven't changed anything, the default password for Telnet is admin and the port in use is 4212. That's it. VLC must be running to get streaming working. There are options to install VLC as a Windows Service or you can create a bat-file to be executed upon launch of your VLC-server. I guess similar options are availabe on Linux and MAC as well.
2) if you are going to use streaming outside your Local-LAN, you must ensure that you have set up port-forwarding correctly in your router. You must ensure that the WebIf can be accessed. You must ensure also that port 4212 (for Telnet) is opened and forwarded to the VLC-server. The same goes also for the streaming-port on the VLC-server which TCPMP/Coreplayer needs to access to receive the stream. So, basically you need to set up port-forwarding for one port for accessing the WebIf of your Dreambox and two ports for accessing your VLC-server.
3) A typical VLC-command to get streaming going is as follows:
Code:
vlc.exe" -vvv [url]http://192.168.1.130:31339/0,0025,0384,0385,0295[/url] --sout #transcode{vcodec=MP4V,vb=384,scale=0,5,acodec=mp3,ab=64,channels=1,deinterlace}:Duplicate{dst=std{access=HTTP,mux=ASF,dst=192.168.1.12:8085}}
Here are some explanations:
- the part "vlc.exe" is handled by WMDR using Telnet. You don't need to anything except for filling in information regarding the IP-address of your VLC-server, its password and which port to use.
- the part
Code:
"http://192.168.1.130:31339/0,0025,0384,0385,0295"
is your dreambox-ip, the port used for streaming and some channel-parameters. These parameters are handled automatically by WMDR and do not require your attention
- the part
Code:
"#transcode{vcodec=MP4V,vb=384,scale=0,5,acodec=mp3,ab=64,channels=1,deinterlace}:Duplicate{dst=std{access=HTTP,mux=ASF,dst="
is the one you have to insert in WMDR and which you need to experiment with to get the best picture/quality/fluidity according to your connection-speed. WMDR is pre-installed with 3 examples which are working on my HD2, my WIFI (using 54g) and my ADSL with an upload speed of 512kb. You can use those as an example and then modify them according to your needs.
- the part "192.168.1.12:8085" is the IP of your VLC-server and the port which TCPMP/Coreplayer should connect to in order to get the stream. You fill in this information in the stream-profiles.
With this information, you can set up your streaming-profiles in WMDR. In the streaming-profiles, you will find an additional setting called "VLC Sleep Delay". You can leave it at 200ms as its default-value. This parameter is used by WMDR when "talking to" VLC via Telnet. If the connection is very slow, you can increase this value but normally, even on Mobile-connections, the value of 200ms is OK.
Above information should get you going.
If you have problems with streaming, look at the points mentioned above since it is unlikely due to WMDR itself and that I can do anything to resolve your problems.
Good luck!
TIPS AND TRICKS:
-To make TCPMP open up automatically in full screen mode, you can do the following registry-edit:
Code:
HKEY_LOCAL_MACHINE\Software\TCPMP\PLAY
DWORD 123
Change value from 0 to 1
-For associating the file-extension ASX with TCPMP, do as follows: In TCPMP it is under:
Options -> Settings (you need to scroll down to see that option) - > Click button "Select Page" - > File Associacions
Click to expand...
Click to collapse
-As far as I have understood, TCPMP has been discontinued but there are some people updating it from time to time. If you have problems viewing the stream, it may (perhaps) be because you are using an old version of TCPMP. Here are two links to TCPMP which I have found working on my HD2:
http://forum.xda-developers.com/showpost.php?p=5657963&postcount=1
http://forum.xda-developers.com/showpost.php?p=5685536&postcount=1
TROUBLESHOOTING
- If you get errors in TCPMP (unknown file format, crashes) or if you don't see anything at all, you can try the following to trace where the error originates:
Select Stream in WMDR and if you get an error message from TCPMP, just disregard the error and put your device on the table or wherever. Don't click on anything. Don't kill the stream. Now, in the folder of WMDR on the device, you should find a file called WMDR.asx. Copy this file to your desktop (on a PC). Go to your PC and right-click on WMDR.asx and choose "open with" and select VLC (it will open another session of VLC). If you now can see the stream from your Dreambox on your computer-screen, then it means that WMDR comunicates correctly with VLC and most likely there is a problem with TCPMP/Coreplayer or because the file is too large/complex to be seen on the device. If you don't see anything, then probably there is a communication-problem between WMDR and VLC. Check IP-address, Port and Password of VLC.
- Make sure that streaming actually works between your Dreambox and VLC (without using WMDR) and that you can watch the streams on your computer. You can test this by using the web-interface of your Dreambox or you can search internet for instructions. If you have problems (can't see anything at all, bad quality, buffering-problems etc), then the problem itself lies with the source and there is no way streaming will work in a satisfying way. For instance, it has been reported that cheap (clones of) DM500 might have problems with streaming.
is this like a remote control app for any settop boxes and tv's that uses ir port or is it limited to the Dreambox?
Sorry - it's not using an ir port.
The application controls the receiver through the receiver's web-interface or through telnet.
However, the application could probably be used with (and modified to support) other types of receivers as long as there is a way to communicate with the receiver via local network, wifi, data-connections or Internet. If anyone is interested, please let me know.
trickbiker121 said:
is this like a remote control app for any setop boxes and tv's that uses ir port or is it limited to the Dreambox?
Click to expand...
Click to collapse
tilleke said:
Sorry - it's not using an ir port.
The application controls the receiver through the receiver's web-interface or through telnet.
However, the application could probably be used with (and modified to support) other types of receivers as long as there is a way to communicate with the receiver via local network, wifi, data-connections or Internet. If anyone is interested, please let me know.
Click to expand...
Click to collapse
sorry this isnt the app that i thought it was sorry to bother you
Hi Tilleke
Very nice looking release. I'm really happy with it!
i have tested it and here are my results:
Main screen > remote controle > page 2 > the numbers are not working here.
Main screen > preferences > Create bouguets > This option crashed my dreambox with a blue screen like windows always do...
Remember this is NOT a comment, this is only to help you with this great app!
Great Job, keep going... and i will be waiting till next release.
Thanks for testing and posting your results.
Can you please let me know which receiver you have and which image you are running. And on which device did you test it?
Will check this better.
citychannel said:
Main screen > remote controle > page 2 > the numbers are not working here..
Click to expand...
Click to collapse
When creating the bouquets, did you follow the procedure written in the first post? I am saying this since that part is not fool-proof yet. Did you reach the point when a message appears indicating "Update ready" or did it crash before. BTW: I have never seen a crashed dreambox with a blue screen I'd love to able to reproduce that error
citychannel said:
Main screen > preferences > Create bouguets > This option crashed my dreambox with a blue screen like windows always do.....
Click to expand...
Click to collapse
Thanks!!
citychannel said:
Remember this is NOT a comment, this is only to help you with this great app!
Great Job, keep going... and i will be waiting till next release.
Click to expand...
Click to collapse
Hi there
1) I have a dreambox 7025 with enigma on it
2) i didn't saw ' update ready' the DM crashed 4 seonds after i pressed the 'Create Bouquets for this profile'
A new 'bug' i found is the time out bug. This error appears randomly after zapping between channels or using the volume buttons.
Good luck and thanks!
thanks for your report.
1) OK, you've got DM7025 and running Enigma(1). Are you using the original image or have you flashed another image such as Gemini, Nabilo...If yes, which one?
2) Can you access the WebIf of the DM7025 using your local network and using a normal web-browser? In your browser, you should use:
Code:
http://ip-address of DM7025:port
it should then ask you for a user-name and password, normally root and dreambox.
example:
Code:
http://192.168.0.83:8888
If you are using the standard port (80), it could also be:
Code:
http://192.168.0.83
When you are connected to the WebIf and clicking on ZAP, can you see your bouquets and channels?
3) The time-out bug: What message do you get. Can you please transcribe it? Does this happen when you are connected using WIFI or when you are connected using the data-connection of your phone-provider?
4) what device are you using?
Sorry, but I need above information otherwise I really don't see how to track down the errors you mentioned since I can't reproduce them on my system/device.
PS: I confirm that the numbers on the 2nd screen don't work. I forgot to enable a few lines in my code. Will be corrected in next version. Thanks for finding out.
citychannel said:
Hi there
1) I have a dreambox 7025 with enigma on it
2) i didn't saw ' update ready' the DM crashed 4 seonds after i pressed the 'Create Bouquets for this profile'
A new 'bug' i found is the time out bug. This error appears randomly after zapping between channels or using the volume buttons.
Good luck and thanks!
Click to expand...
Click to collapse
Hi, working on my hd2 with dreambox 7000 S (gemini 4.6).
But one issue: The programm can´t display the german letters ä, ö and ü (in programm-list and bouquets)
Glad it works.
Thanks for reporting the problem with the German letters. This probably means it would be a problem with other characters as well. I will check this issue and see if I can correct it in next release.
Bib_x said:
Hi, working on my hd2 with dreambox 7000 S (gemini 4.6).
But one issue: The programm can´t display the german letters ä, ö and ü (in programm-list and bouquets)
Click to expand...
Click to collapse
Can you add support for modacos´s apptodate?
http://www.modaco.com/category/332/apptodate/
http://forum.xda-developers.com/showthread.php?t=327990
Hi Tilleke,
1) Im running Enigma with Gemini on it
2) Yes i’m using Webif and i can zap normally without lag or error (192.168.1.12), so port 80
3) I am using a WIFI connection and after 2 or 3 times pressing downwards in bouquets it comes with this error:
An error occurred on sub_modcommon_executeurl
Response code -1
Timeout
Continue?
4) i am using a HTC TD2 with WM6,1 pro
Thanks in advance
The num pad on second screen isn´t working. Only the buttons on bottom (tv, radio, text, help) are working.
Thx for the suggestion. I'll see what can I do.
Bib_x said:
Can you add support for modacos´s apptodate?
http://www.modaco.com/category/332/apptodate/
http://forum.xda-developers.com/showthread.php?t=327990
Click to expand...
Click to collapse
Yep. Already reported by citychannel. See first post under known issues.
Bib_x said:
The num pad on second screen isn´t working. Only the buttons on bottom (tv, radio, text, help) are working.
Click to expand...
Click to collapse
Thx for the information. This will facilitate tracking down the error and how to resolve it.
citychannel said:
Hi Tilleke,
1) Im running Enigma with Gemini on it
2) Yes i’m using Webif and i can zap normally without lag or error (192.168.1.12), so port 80
3) I am using a WIFI connection and after 2 or 3 times pressing downwards in bouquets it comes with this error:
An error occurred on sub_modcommon_executeurl
Response code -1
Timeout
Continue?
4) i am using a HTC TD2 with WM6,1 pro
Thanks in advance
Click to expand...
Click to collapse
Thanks for your work
im a db fanatic and currently working on e2 image let me know if you need any help.
One small request:
Would be possible in future release to add a DyNdnS address facility ?
It already works...
I have a profile called "away" which I use to set timer-events when I am not at home. Set up a new profile and in the IP-address-field, just write your DynDNS-address and in the Port-field the port you are using.
You might, of course, need to enable portforwarding in your router-settings.
Hope this helps.
^^MeX^^ said:
Thanks for your work
im a db fanatic and currently working on e2 image let me know if you need any help.
One small request:
Would be possible in future release to add a DyNdnS address facility ?
Click to expand...
Click to collapse
A little bit offtopic:
Do you know which ports i have to forward in my router if i want to stream my dreambox-tv-program over internet with vlc?
Streaming in LAN works well, but i want to watch TV outside my home, too.
Description: Synchronizes the internal system clock based on different time sources.
Source code: http://github.com/marciof/Time-Synchronization
Current features:
Time sources: cellular radio, GPS receiver.
Planned features:
Installation setup file.
System service for automatic synchronization.
Configuration file support.
Time sources: FM radio, Internet.
Known issues:
Unable to select and copy text.
Unable to navigate the text boxes, e.g. by using the tab key.
Notes:
As can be seen from the pictures, although I've implemented support for NITZ data I haven't been able to test it since it doesn't seem to be implemented on my Sony Ericsson X1. Maybe it's possible to somehow enable it manually, but I don't know how to do that.
It should be extremely fast to open and close the program because it's written in C++. The source code is missing documentation and tests which I haven't added yet because of my short free time.
The interface should be self-explanatory but if you have any questions or issues just tell me and I'll see what I can do. Of course that people who donate will have higher priority and motivate me to further develop.
Got it running on my AT&T Tilt 2 (HTC Touch Pro 2) but I guess it doesn't support NITZ data like your X1 either (I get "Unknown NITZ support" same as you).
I'm glad it works for you. By the way, did you also get the same text as me after the colon?
Same message to me:
"Unknown NITZ support: The parameter is incorrect."
I have a HTC Touch2 (Mega - T3333), and my operator is TIM (italy)
Yup, that's the error message associated with "ERROR_INVALID_PARAMETER" resulting from a call to "RIL_GetDevCaps" with "RIL_CAPSTYPE_NITZNOTIFICATION".
I've tried before calling directly "RIL_GetSystemTime", but I always got "E_NOTIMPL" which probably comes from "UNSUPPORTED(RILDrv_GetSystemTime, (DWORD));" in "WINCE600\PUBLIC\CELLCORE\RIL\DRIVER\MDD\rilmain.cpp".
Just a quick note, I've added a link to the source code in case anyone is interested in poking with it or giving me comments about it.
Important: Uninstall previous versions and DELETE any map previously downloaded with Litetrack, they're not compatible with v0.7.
Saved tracks and POIs are still compatible.
what's new in 0.7 version:
- No more tiles' limit in map's download.
- Map is saved as a single file, to save space in your SD
- User's location added to Track viewer, to walkback even without map
- New scrolling system
- Bugs fixed, all regional settings (should be) supported
- Mobile Cells localization and caching
About Cells localization: even without GPS you will have an idea about your location. This feature can be enabled or disabled from settings. How it works: any new phone cell encountered is added to the app database; if online, also cell's location is obtained and added to database. (*)Cells' locations can even be added later (menu -> tools -> Update). Once the cells are registered with their locations can be used offline also.
* This means you'll be free to go around and around staying offline, LiteTrack still collects info about phone cells encountered (but don't forget to enable it from settings). Once at home, turn online and update the database, all the cells previously collected are now ready to be displayed on the map and used offline. In other words, you will have your personal database of mobile cells!
-------------------------
LiteTrack is the right tool to record your route, save off-road paths, retrace a journey, obtain detailed gps data, or simply get your position on the map. All staying offline!
UI attractive, finger friendly, real full-screen usage.
Features (what you can do with LiteTrack):
- Display your position on the map
- Download maps from OpenStreetMap sources directly to your device
- Track your routes, also off-road, and save them to files
- Obtain track's statistics, also in realtime
- Append new tracks to existing track files
- View tracks in a separate context (Track Viewer)
- Export tracks to GPX and KML
- Save your current position as a new POI
- Attach comment and picture to your POIs
- Import tracks and POIs on the selected map
- Get detailed GPS info (lon, lat, alt, speed, heading, DOP, hDOP, vDOP and more)
- Display charts about satellites detected
- Obtain specific data about each satellite (id, azimuth, elevation, signal strength)
- Gadgets feature: get weather forecast, compass, clock and system monitor
- Mobile Cells localization and caching
Requirements: WM 5, 6, 6.1 or 6.5, touchscreen with VGA or WVGA resolution (640x480 or higher), .NET CF 3.5
Hope you enjoy all the new stuff!
If you like this app please consider to
eur, or
usd, the amount you prefer. Thank you!
Thanks!
was looking for one, thanks
Hello Xdaid,
Unfortunately I'm not able to use this jewel on my HD2 for several raisons:
- the zoom level is limited (only one level) therefore to select the area for downloading the map is impossible; the range selected is too wide, therefore I've a message "out of the range" or "latitude S cannot be lower than latitude N" even if I change it manually
I've tried to select area from top left to bottom right or vis versa but same result.
I really need this kind of soft for off-road tracks in the beautiful desert of UAE
Can you help on this issue?
Thanks and regards,
Renaud
Neat! Will Try!
Will give this piece of software a work out, meanwhile is it capable of GSM triangulation? If not is it coming anytime soon?
very nice idea but it doesn't work on htchd2.
No luck with Omnia2 i920 version.
GPS "on" leads to "error page" ,press details program shuts down.
I tried soft reset.
Started "Bing" first to get GPS working. no luck
soft reset no "Bing",no luck.
Looks like a nice and easy to use program.
Thanks for the efforts.
It is working with TP2.
WM 6.5.3
To Romeo Fox
Consider that
1) max size is 1000 tiles per map, in respect of OpenStreetMap rules.
2) at first launch of LiteTrack you have a global map, not detailed at all.
Well, to get detailed maps of towns and small areas follow these steps:
1) take an area from default map (e.g. your country or state) and download.
2) open the map just downloaded, select the area you're interested and download again. You will have more zoom options now.
Hope this help.
To HD2 users
I'm getting opposite feedbacks, there are hd2 users saying it works, and other saying it doesn't. I'll try to find the point and solve any issue.
Looks great xdaid. Thanks!
Hello xdaid,
bad luck for me. whatever i select as area (trying france for exemple) i've got error message on preview selection.
Anyway, i will follow your news as this soft is exactly what i'm looking for since longtime
Congrats for job done so far.
Renaud
Ps: official rom 1.66 on hd2
Romeo Fox said:
Hello xdaid,
bad luck for me. whatever i select as area (trying france for exemple) i've got error message on preview selection.
Anyway, i will follow your news as this soft is exactly what i'm looking for since longtime
Congrats for job done so far.
Renaud
Ps: official rom 1.66 on hd2
Click to expand...
Click to collapse
Renaud, the issue you encountered, almost sure, is related to the mouse pointer on capacitive screen. That's the reason you can't get the right coords when you select the area to download.
It would be helpful for me if you:
1) type manually into wizard's boxes the values
1 (W), 2 (E), 2 (N), 1 (S)
choose first zoom level available and let me know if download starts.
It should start.
2) draw a rectangle around France an let me know what values you read into
the wizard's boxes
Since i tested my app on resistive-screen devices only (ouch!) these info will help me to fix the issue.
regards
great app, but unfortunately my device is qvga.. i hope you realease a qvga version too
hi
i install it on my Diamond
and...it doesn't open
:'(
any idea??
thanx
xdaid said:
Renaud, the issue you encountered, almost sure, is related to the mouse pointer on capacitive screen. That's the reason you can't get the right coords when you select the area to download.
It would be helpful for me if you:
1) type manually into wizard's boxes the values
1 (W), 2 (E), 2 (N), 1 (S)
choose first zoom level available and let me know if download starts.
It should start.
2) draw a rectangle around France an let me know what values you read into
the wizard's boxes
Since i tested my app on resistive-screen devices only (ouch!) these info will help me to fix the issue.
regards
Click to expand...
Click to collapse
Hello xdaid,
First of all thanks for your support.
I've captured the coords manually for France as followed:
left (W): 4.2904
Right (E): 6.0704
Top (N): 48.2904
Bottom (S): 43.4005
Zoom level cannot be selected (grey square) and when i'm clicking on preview I still get the message "values out of range".
If i select the area through your tool i've got:
left (W): -2.8125
Right (E): 6.3281
Top (N): 50.15625
Bottom (S): 43.359375
Result is the "latitude-S cannot be lower than latitude-N" as message error.
I still cannot select zoom level as well.
Others infos:
map name> i leave it empty
outpout> none
source>openstreetmap
Hope it will help you.
Regards,
Renaud
xdaid said:
Renaud, the issue you encountered, almost sure, is related to the mouse pointer on capacitive screen. That's the reason you can't get the right coords when you select the area to download.
It would be helpful for me if you:
1) type manually into wizard's boxes the values
1 (W), 2 (E), 2 (N), 1 (S)
choose first zoom level available and let me know if download starts.
It should start.
2) draw a rectangle around France an let me know what values you read into
the wizard's boxes
Since i tested my app on resistive-screen devices only (ouch!) these info will help me to fix the issue.
regards
Click to expand...
Click to collapse
Hello xdaid,
First of all thanks for your support.
1/ I've captured the coords manually for France as followed:
left (W): 4.2904
Right (E): 6.0704
Top (N): 48.2904
Bottom (S): 43.4005
Zoom level cannot be selected (grey square) and when i'm clicking on preview I still get the message "values out of range".
2/ If i select the area through your tool i've got:
left (W): -2.8125
Right (E): 6.3281
Top (N): 50.15625
Bottom (S): 43.359375
Result is the "latitude-S cannot be lower than latitude-N" as message error.
I still cannot select zoom level as well.
Others infos:
map name> i leave it empty
outpout> none
source>openstreetmap
3/ by selecting your numbers (W1, E2, N2, S1) i'm able to selected zoom level from 11.
Download is not starting automatically (for info, i'm on wifi), output shows 49titles. I've put a name in map name, after start and download works and map folder with file image is created on litetrack main folder.
After, if i draw rectangle around France i'm still have "out of range value" message with those kind of values:
L(W): -0.703125
R(E):5.625
T(N):48.984375
B(S):43.828125
I've tried as well, gps on, to selected country where i'm leaving (UAE-Dubai) and same error message "Longitude W cannot be lower than Longitude E" with values
L(W): 52.26525
R(E): 55.3125
T(N): 25.078125
B(S): 23.671875
Hope it will help you.
Regards,
Renaud
andreatozzi said:
great app, but unfortunately my device is qvga.. i hope you realease a qvga version too
Click to expand...
Click to collapse
Oh yeah +1 for a qvga version
To Romeo Fox and other users who get "out of range" message
i found the issue, it looks really WEIRD
the problem is the conversion of text boxes' values into numeric floating values, weird cause the code appear to be right, and mostly cause my device, other devices i tested and wm 6.5 emulator work flawless.
I'll be fix it really soon, in the meanwhile try this:
select an area (France ), tap OK and then simply replace the characters '.' into the boxes (top, left, right, bottom) with the character ','
Let me know, but i'm pretty sure this works.
ver 0.2 - fixed!
I made some changes which should have solved issues encountered on hd2 and a couple of other devices:
- GPS handler fixed
- Map selection tool now working propely
Also app was succesfully tested on VGA square screen
Hope you enjoy!
waiting for some feedbacks, thanks
xdaid said:
I made some changes which should have solved issues encountered on hd2 and a couple of other devices:
- GPS handler fixed
- Map selection tool now working propely
Also app was succesfully tested on VGA square screen
Hope you enjoy!
waiting for some feedbacks, thanks
Click to expand...
Click to collapse
Hello xdaid,
tested new version. Download works now!! but only on wifi and not in 3G. There is a bug on saving track which generate error and close litetrack without saving it.
This is quite annoying. Otherwise others features and options seem working..
I'm only one to get this error on saving track?
Regards,
Renaud
Hi all, I decide to make this small tutorial because it is really difficult to make a rom if you don't have that device
so this is the way I make my rom's, I know there are a lot of other ways to make a rom but this is the way I cook.
And I want to ask all other cookers to help me with this, because I simply don't know everything about cooking, I'm still learning.
PART 1
First of all the kitchen.
The kitchen I use is the one from airextreme which can be found HERE thanks to airextreme
After downloading the kitchen, just install the kitchen by example c:\kitchen
Now we have to add the stock rom in the kitchen, the great thing about this kitchen is that you don't have to
extract the exe file from the original rom, the kitchen will do that for you.
If you have a NEON400 download your rom HERE
All other shipped rom's can be found in conflippers thread HERE thanks to conflipper
To add the stockrom just run oskitchen.exe as an administrator and the kitchen is asking you for the device,
if your device is not in the list just type a name for your device.
Search for RUU_signed.nbh if you extracted the exe file or just search for your original exe file
by example (WWE_2.16.831.3_Radio_NikeMR_1-65.29.22_signed_Ship.exe) if you didn't extract the exe file.
And let the kitchen do his job, after the kitchen is finished, you just made your own kitchen.
And if you all can see the kitchen exactly know which files you must recmoded so you don't have to do that.
PART 2
Where can I found the latest wm 6.5 builds and how to add them into my kitchen.
There are a lot of site's where you can found the latest wm 6.5 builds, I just have to ask the owners if I have permission to add
the link here (If you send me a pm, I can send you the links). But I don't think it is a problem if I upload the latest build.
How to add a new wm 6.5 build, just click on Import and choose Import a windows mobile build.
As you can see there are 3 options to add a new build.
Just search for the new build and click on it and then start importing.
Now you've added the latest wm 6.5 build into your kitchen.
In post 3 I placed the tested builds, you don't have to import that one I already made it ready for the kitchen.
Click to expand...
Click to collapse
That's it for now, more to come later....so keep an eye on this thread.
HTC Packages and what do they do (Thanks to cnzqy1 from www.mobileunderground.info)
Abbreviations of device names:
A - All devices, L - Leo, S2 - Topaz S2 and Rhodium S2, Q - Qilin(TI OMAP Chipset, GSM and TD-SCDMA dual mode), TC - Tachi(GSM and CDMA2000 dual mode), R - Rhodium, T - Topaz, G - devices with GSM network support, C - devices with CDMA2000 network support, O - Old devices(Diamond, Raphael and Blackstone).
Packages:
A4 IME(Q, TC): Chinese Pinyin IME, Chinese only.
Abobe PDF(A): PDF viewer.
AdvancedNetwork(L, S2, Q): Sets network for operators, GSM only.
Album(A): HTC replacement of original Pictures and Videos. Including picture viewing and video playback function, dependency of Manila and Camera(maybe).
aGPSConfirmation(L, S2): Ask for confirmation when uses A-GPS, GSM only.
App Service(A): Application Service. May be a dependency of other HTC applications.
Appoinment Editor(L, S2, Q): HTC replacement of original appointment editor, dependency of Manila 2.5 and 2.6.
Arcsoft MMS(O): MMS application.
Arphic CHS Font(A): Font for Simplified Chinese, Chinese only.
Audio Booster(A): Visual Equalizer.
Audio Manager(O): Audio manager with GUI, dependency of Manila 1.x.
Audio Manager Engine(A except O): Audio manager without GUI, dependency of Manila 2.x.
AutoRun(O): First boot customization.
BluetoothSetting(A): Extension of the original Bluetooth Setting.
Boot Launcher(A): Launch applications or services when boot.
Browser Snapshot(L, S2, Q): Support bookmarks thumbnails in Manila 2.5 and 2.6.
BTBPP(O): Provides print messages by Bluetooth printer function.
BTFTP(O): Makes your device a Bluetooth FTP server, also named as Bluetooth Explorer.
Caculator(L, S2, Q, TC): HTC replacement of original calculator.
Camera(A): HTC camera application, device dependent.
CheckAutoRun(O): Dependency of AutoRun.
CHS FontSetting(A): Switches between the Simplified Chinese fonts, Chinese only.
ClearStorage(A): Hard reset the device.
CM Guardian Service(TC): Prevent the connection settings from lost on Tachi. Not useful.
CMBandSwitching(L, S2, Q): Switches between bands, GSM only.
CMBluetooth(Q): Bluetooth earpieces setting-up wizard.
CMCallBarring(L, S2, Q): ?
CMInternetSharing(L, S2): Make your device a Wi-Fi access point.
CommManager(A): HTC replacement of the original Comm Manager. Wireless controls, dependency of several CM applications and WiFiWizard.
ConnectionSetup(L, S2, Q): Sets up connection for the phone, GSM only.
Concurrence Mgr(A): Deals with applications behaviours when two applications running together according to registry keys.
Contact Picker(L, S2, Q): HTC style contact picker, dependency of new Message Enhancement and HTCMessaging Client, newest versions are not suitable for VGA devices.
Contact Utility Engine(A): Deals with contacts, dependency of Manila and Phone Canvas Enhancement.
CyberonVoiceSpeedDial(Q, TC): Voice dialing application, Chinese only.
DataDisconnect(A): Disconnects data connections, dependency of CommManager.
DelWMPTempFolder(L, S2, Q): Deletes the Temp folder of Windows Media Player.
DeviceInfo(A): HTC replacement of th original Device Info.
DigitalCompass(L): Hardware compass, device dependent.
DMRouter(C): Diagnostic tool for CDMA2000 devices, CDMA2000 only.
Dopod Base(Q): Controls and graphics for Dopod applications, dependency of some Dopod applictions, Chinese only.
DopodCTApp(TC): Applications specially for China Telecom, Chinese only, not useful if not on China Telecom network.
DRM Middleware(A): Related to DRM functions, dependency of Audio Manager and Audio Manager Engine.
Dshow(A): Multimedia components, dependency of Album and Camera, device dependent.
Email Setup Wizard(A except O): HTC replacement of original Email Setup Wizard, dependency of Manila 2.x.
EPST(C): CDMA2000 NV items editor, CDMA2000 only.
ExtNewPhoneSetting(L, S2, Q): HTC replacement of the original Extended Phone Setting, GSM only.
Facebook Engine(L, S2, R, T): Facebook integration for Manila 2.x, dependency of Manila 2.x.
FlashLiteShareDll(L, S2, Q): Dlls for Flash Lite, may be a dependency of Manila 2.5 and 2.6.
Field T e s t(G except Q): Diagnostic tool of network status of GSM devices, GSM only.
FieldTrial(C): Diagnostic tool of network status of CDMA2000 devices, CDMA2000 only.
FM Radio(Almost A): FM radio application, device dependent.
Fuart(C): Enable/Disable Full Speed USB Mode, CDMA2000 only.
Full Screen Player(A): Plays videos in Album, dependency of Album.
GMM(L, S2): Google Maps.
GMM Customized(L): Fake Google Maps(?), Chinese only.
GoogleLocationService(A except O): Google Location service, dependency of My Location service.
Group Editor(L, S2, Q): HTC replacement of original Contact Group Editor, dependency of Manila 2.5 and 2.6.
G Sensor Calibrator(A): Calibrates G-Sensor.
HTCAnimation(A): Boot and shutdown animation and sound.
HTCAPM(O): HTC Advanced Power Management.
HTCApplication(A): Dependency of some HTC applications.
HTCBirthday(L, S2, Q): Birthday notification manager.
HTCBookmark(L, S2, Q): HTC bookmark manager, can replace the Opera one, dependency of Manila 2.5 an 2.6.
HTCFDN(L, S2, Q): HTC fixed dialing network, GSM only.
HTCFont Link(A): Manila fonts support.
HTCFramework(A except O): Dependency of some HTC applications.
HTCGeoService(A except O): Dependency of My Location service.
HTCGesture(O): ?
HTCMessage(A): ?
HTCScroll(A except O): Provide scrolling function for HTC applications, dependency of some HTC applications.
HTCSettings(A): ?
HTCStartUp(A): ?
HTCUtil(A): Related to several system functions, dependency of some HTC applications.
IE6Enhancement(L, S2, Q): ?
InCallRecorder(Q): Record phone calls.
IME CHS(L, Q): Touch Input Simplified Chinese variant, Chinese only.
IPDial(Q, TC): Auto prepend IP dial prefix, Tachi variation has dual-mode support and may be Tachi only, Chinese only.
JBlend(A): Java Virtual Machine.
Jbed(R): Java Virtual Machine.
LockScreenAppLauncher(A except O): HTC replacement of original Windows Mobile lock screen.
Long Press End Key(A): Prompt you long pressed end key, newest versions are device dependent.
MaLanHua(TC): Chinese handwriting IME, Chinese only.
Manila(TC, R, T, O): Manila 1.x or 2.0 or 2.1.
Manila Calendar(L, S2, Q): Calendar tab for Manila 2.5 or 2.6.
Manila Core(L, S2, Q): Core components of Manila 2.5 or 2.6.
Manila Footprint(L): Footprint tab for Manila 2.5.
Manila Home(L, S2, Q): Home tab of Manila 2.5 or 2.6.
Manila Internet(L, S2, Q): Internet tab for Manila 2.5 or 2.6.
Manila Mail(L, S2, Q): Mail tab for Manila 2.5 or 2.6.
Manila Message(L, S2, Q): Message tab for Manila 2.5 or 2.6.
Manila Music(L, S2): Music tab for Manila 2.5.
Manila People(L, S2, Q): People tab for Manila 2.5 or 2.6.
Manila Photo(L, S2, Q): Photo tab for Manila 2.5 or 2.6.
Manila Program(Q): Program tab for Manila 2.6.
Manila Settings(L, S2, Q): Settings tab for Manila 2.5 or 2.6.
Manila Stock(L, S2): Stock tab for Manila 2.5.
Manila Twitter(L, S2): Twitter tab for Manila 2.5.
Manila Weather(L, S2, Q): Weather tab for Manila 2.5 or 2.6.
Media Tool kit(A except O): Dependency of Album, must match Album version.
Menu Enhancement(A except O): Provides a finger-friendly menu.
Message Enhancement(A except O): Provides numbers and links interactions in messages and a compose page, dependency of Manila and Phone Canvas Enhancement, must match Manila and Phone Canvas Enhancement version.
mHub(O): Codec pack, dependency of Album and Camera.
mHub Emz(TC): Codec pack, dependency of Album and Camera.
mHub VO(L, S2, Q): Codec pack, dependency of Album and Camera.
MicrophoneAGC(A): Microphone auto gain control.
MP3 Trimmer(A): Trims MP3 files on your device.
Mute(A): Provides some mute features.
MyCPL(A): Make shortcuts in Settings, just like the .cpl files, dependency of many packages.
New Contact Card(A except O): Create and edit contacts, dependency of Manila and Message Enhancement, must match Contact Utility Engine version.
NewMailAccount(A): ?
Notification Enhancement(A except O): Enhances notification manager.
OmniBizCard(Q, TC): Chinese business cards scanner, Chinese only.
Opera Browser(A): Internet browser.
PhoneAlarm(Q, TC): Qilin variation: Extended events notifier, repeatedly notifys when there are unread SMS, missed calls, etc. Tachi variation: Notifys you when you have a call for every 1, 5, 10, 20 or 30 minutes.
Phone Canvas Enhancement(A): HTC style phone canvas.
PhoneCanvas(C): CDMA2000 dialer parser, support entering EPST, etc. by inputting phone codes, CDMA2000 only.
PhoneExt Service(C): Extended services for CDMA2000 devices, CDMA2000 only.
Picture Enhancement(A except O): ?
PKG(A): Installs .pkg files.
Power(A): HTC replacement of original power settings.
Power Service(A except L): Power service of devices.
PowerOffWarning(A): The prompt when you long press power key.
PowerWord(Q, TC): English-Chinese and Chinese-English dictionaries, Chinese only.
Quick GPS(A): Download satellite maps to speed up GPS positioning.
Resource Proxy(A except O): Preload graphical resources and be the proxy of resources for HTC applications, dependency of some HTC applications.
Ringtone Plugin(A except O): Set ringtones by long press on audio files in file explorer.
SCP(Q, TC): Personal security center, provides calls firewall, messages firewall, remote control by messages and notifiy if SIM card changed functions. Device dependent, Chinese only.
Search Call Log(Q): Provides searching call logs function in built-in search application.
SendContactViaSMS(O): Provides sending contacts via SMS function, Chinese only.
Sensor SDK(A): Fundamental service for all sensors, device dependent.
Settings Improvement(L, S2, Q): Dependency of Manila 2.5 and 2.6 and some HTC applications.
SharedDll(O): Dlls used by HTC applications, dependency of some applications
Shared Modules(A except O): Modules used by HTC applications, including vibration service, dependency of some applications.
SharedResource(L, S2, Q): Graphics and some files for HTCFramework, must match HTCFramework version.
SignatureReplace(A except O): ?
SlidingSound(R): Play sound when you slide out/in the keyboard.
SmartTouch(O): Support of the touch panel of Old devices, device dependent.
SMS Pack(Q, TC): Provides several SMS related funtions(backup, search, auto replay, group send), Chinese only.
SMSInboxThreading(L): Switches between threaded mode and unthreaded mode.
StartIconLoader(L, S2, Q): Dependency of Manila 2.5 and 2.6, must match Manila Core version.
Storage Low(A): Notify you when your storage is low.
Streaming Media(A): Streaming media player.
Streaming SDK(A except O): Streaming media component.
TaskManager(Q, TC, O): HTC task manager with a quick menu in Today.
TaskBarIconMgr(A except O): Taskbar icons service with icons pack(Bluetooth headset icon, earphone icon, etc.).
Teeter(A): HTC G-Sensor game.
TimeZoneAutoFix(A except O): Auto fixes time zone when connected to Internet.
TVOutPopUp(R): Provides TV-Out feature, device dependent.
USB To PC Pop Up(A): Switches USB connection between ActiveSync mode, Mass Storage mode and Internet Sharing mode.
VBookmarkMgr(L, S2, Q): Manages visual bookmarks, dependency of Manila 2.5 and 2.6.
Voice Recorder(A): HTC replacement of original Recorder.
VoiceOut(O): Reads out incoming SMS, time, etc., Chinese only.
Volume Control(A): HTC style volume control, newest versions are devices dependent.
WiFiWizard(A except O): Wizard for Wi-Fi connection.
WiFiSettings(A): Basic settings for Wi-Fi.
WLANSettings(A): Advanced settings for Wi-Fi.
zlibce_m(A except O): ?
Click to expand...
Click to collapse
To make it easier for all off you, I will place the tested builds here, the only thing you have to do is extract the file and place it into your kitchen/sources/windows mobile builds folder and you're done.
23673 com3 Contains some bugs.
23128 com3 Already replaced cprog.exe, pimstore.dll, tpcutil.dll, lockscreen.dll taken from 23563, take care small sms bug.
21914 com2 No bugs, added office mobile 2010
23130 com3 Already replaced cprog.exe, pimstore.dll, tpcutil.dll, lockscreen.dll taken from 23563
Thanks for posting this tutorial!
Looking forward for the next parts!
Regards
GLa'DOS said:
Thanks for posting this tutorial!
Looking forward for the next parts!
Regards
Click to expand...
Click to collapse
Thx buddy, I add some more info later today.
Greetz,
I have a problem with the building, after I insterted a build and made a rom, there is still the cube and the default designs, settings and programs of the stock rom.
I added some programs and themes in the kitchen but they are not in the new rom
Hope you can help me
GLa'DOS said:
I have a problem with the building, after I insterted a build and made a rom, there is still the cube and the default designs, settings and programs of the stock rom.
I added some programs and themes in the kitchen but they are not in the new rom
Hope you can help me
Click to expand...
Click to collapse
Sure I can help it had to be my next part but don't have much time at the moment,so go to your oem-packages and uncheck everything except OEMDrivers and OEM_Lang_0409, then open your OEM_Lang_0409 and delete everything except the files ended with : *.htm, *.mui, *.pwi, *.provxml, mxip_initdb.vol and initflashes.dat.
Hope this will help
Regards,
Rataplan said:
Hope this will help
Regards,
Click to expand...
Click to collapse
It worked!!^^
One more question
I have a problem with the built (21907) you posted:
After I imported it into the kitchen it says:
"No locales are available. Make sure the OEM_Lang_LCID folders and their matching
WM LCID ones are present.
If i try to make a rom with the languagefolder from the stock-rom it gives an error that there happend an error when building the language
Ok, I will check the build and see if there is something missing, I thought I used it for cooking a NEON400 rom but didn't get any feedback so I will check this and keep you informed.
Greetz,
Hi rataplan. i look at WM 6.5 button style at bottom bar.
The normal build SYS for kitchen always result button with circle style for any button or option on the bottom bar. i look at your custom ROM and found that the circle style is change into the rectangle style for any button on the bottom bar. can u tell how to change that ? - sorry newbie.
Thanks for posting this tutorial! I will try soon!
lion_snake1 said:
Hi rataplan. i look at WM 6.5 button style at bottom bar.
The normal build SYS for kitchen always result button with circle style for any button or option on the bottom bar. i look at your custom ROM and found that the circle style is change into the rectangle style for any button on the bottom bar. can u tell how to change that ? - sorry newbie.
Click to expand...
Click to collapse
If I understand you, I didn't change that but that is just another build which uses the old style, I used liven's themes to customize it a little bit, you can find livven's theme's HERE.
Greetz,
pajerm said:
Thanks for posting this tutorial! I will try soon!
Click to expand...
Click to collapse
You're welcome, just watch this thread I will post more information
certainly!
Thanks rataplan for the liven themes. that is exactly what i want.
Now i have a problem when cooking using 6.5 build 24619.
1. the phone canvas has the problem on scroll bar, already fix with phcanrc.dll
but the second problem appeared when my photo contact can not display on phone canvas when call come in.
2. click SMS on contacts did not display any number on "To:" section on SMS entry
any idea ?
lion_snake1 said:
Thanks rataplan for the liven themes. that is exactly what i want.
Now i have a problem when cooking using 6.5 build 24619.
1. the phone canvas has the problem on scroll bar, already fix with phcanrc.dll
but the second problem appeared when my photo contact can not display on phone canvas when call come in.
2. click SMS on contacts did not display any number on "To:" section on SMS entry
any idea ?
Click to expand...
Click to collapse
Hi lion_snake1 just to answer your both questions, I think it isn't a problem from the kitchen but a problem from build 24619, I didn't use that build so it would only be guessing what it could be, so I suggest to take a look at Da_G's thread if there is an answer for your question. You can find Da_G's thread here.
Goodluck buddy,
Rataplan said:
Ok, I will check the build and see if there is something missing, I thought I used it for cooking a NEON400 rom but didn't get any feedback so I will check this and keep you informed.
Greetz,
Click to expand...
Click to collapse
Have you checked this build?
Does it work for Niki's,too, if you used it for Neon Roms?
GLa'DOS said:
Have you checked this build?
Does it work for Niki's,too, if you used it for Neon Roms?
Click to expand...
Click to collapse
I checked this build and it's working, the builds are not device specific, so you can use every build you find, the only thing that is important is that you use dpi 96.
Regards,
But do you know how to solve this error: "No locales are available. Make sure the OEM_Lang_LCID folders and their matching
WM LCID ones are present.
?
GLa'DOS said:
But do you know how to solve this error: "No locales are available. Make sure the OEM_Lang_LCID folders and their matching
WM LCID ones are present.
?
Click to expand...
Click to collapse
I think that you forgot to check under Localization Settings your Locales, you can find that under the tab Project Settings.
If not give me some more info.
Greetz,