Related
During my quest to get rid of german software and get normal english, i have flashed my system like a million times,
then i got an 02 boot image
then a I-mate
then t-mobile
so its possible to change this image to your willing i guess
anyonen figured out what cab file in extended rom holds this image
maybe we can raw hack it
update
if you got an imate
its
Default_Imate.CAB
there are 2 files
0Splash1.005
0Splash2.004
if you run this cab, it will only edit the boot screens, so it turns into i-mate
i dont know how to edit these 2 files yet
they arent any format i know
hexedit read doesnt discover anything
any help here?
*** update
its a raw format
trying a picture in a bit
got a strange picture now
but he its working great
no hard reset needed or anything
still need to get the format right!
then we can all change our boot screen
When it extracts, it creates a files with a .nb extension i believe. I ran the CAB just for fun and cancelled it halfway through. Upon soft reboot, the top part of the "i-mate" logo was missing (as if just cut horizontally). Re-ran the cab, this time it worked fine.
Are these similar to the screens on the original XDA?
ladies and gentleman
You can now change your bootimages to your liking
*** link has been removed, the file is on page 2 ***
This prehistoric way will change
the boot pictures of your xda2
But it works
boot sequence has 2 pictures
1 will be at startup
and the next wil follow after 2 seconds
so you can make something nice
I included 2 working images, so you can test it you like.
Its supposed to be jennifer lopez and second image is matrix revolutions
step by step
------------
1. open a drawing program and maken 2 pictures
make sure they are saved in 320 height and 240
width. save them as normal BMP or JPG as you like
name them Splash1 and Splash2
2. acdsee 6.0 is required and easiest for this
open it and convert the pictures to
RSB RED STORM FILE FORMAT
setting for me where : use a specific resolution 64 megapixel
anti aliashing off
3. when its done rename the extensions to .NB
4.copy the cab file on your phone
and copy the Splash1.nb and Splash2.nb
in your windows folder
5.now run the CAB file
done
you can delete the 2 files Splash1.nc and Splash2.nc from your
windows map
basic
but works
**sometimes the image doesnt fit properly, i think the width must be adjusted.
will look into that later
Akira
akira, you are the man!
-arebelspy
Maybe you could have the cab file (at the end of its running) delete Splash1.nc and Splash2.nc for us?
-arebelspy
You can use WinCE CAB Manager (http://www.ocpsoftware.com/) to edit the CAB file to include the nb files.
Bam, I got matrix code as my bootup image.
-arebelspy
i was very tired yesterday and it was getting late, so i finished it quickly so other could try.
that cab thing is good, ill try this weekend to make something more handy
the file displacement is maybe because the file has to be exactly as big as the original. try that this weekend to..
IMO, keep the cab how it is. If you make the .nb files inside the cab, you'd have to download a new cab file every time you wanted to change the image, etc. It'd be a lot harder for people to change the startup images, how it is now works good, if it would just delete the two files for us.
-arebelspy
is your picture on the right place or displaced?
displaced.. that's why i replaced it with matrix code, so you couldn't tell
then again maybe it was how you saved the images that made it displaced? i just hit save and did it as that filetype, didnt bother to check about the 64 megapixel anti aliasing off thing.
-arebelspy
Hello,
I have tryed the method but it didn't work for me.
I builded a rom on yorch.net with pocketpc 2003 en get de xd developer startup screen, when i do what you tell above and i restart my XDA the developerscreen is still there nothing has changed.
Can you help me with this problem i really want to change the startup picture
platte said:
Hello,
I have tryed the method but it didn't work for me.
I builded a rom on yorch.net with pocketpc 2003 en get de xd developer startup screen, when i do what you tell above and i restart my XDA the developerscreen is still there nothing has changed.
Can you help me with this problem i really want to change the startup picture
Click to expand...
Click to collapse
I think this program works only on XDA II
xda2 only
So it is not possible to change the startuppic of my xda1
correct
I have the same displacement problem. I'll look into it on the weekend
very nice app so far, thx
my images are also slightly displaced though, maybe 10 pixels to the right
The primary purpose of this thread is so that you can post your WM06 (and WM05) themes and splash screens; we will link this in the wiki. Over the next several days, I will be posting some simple instructions on replacing your splash screen and boot graphics, however that information can already be found in the wiki. Feel free to attach any today themes, splash screens, instructions etc.
When you post, please attach a picture so we know what we are downloading and zip file of the graphics so they are not resized by the server.
To get started I have attached a template for making a windows splash, as well as my template I personally use on my device. The "silence of the lambs" style picture hopefully scares the person into returning my device if lost or stolen. I included the templates in the zip file; you can edit your name and contact info; portrait version only. More to follow.
-mix
How do I change my windows splash screen?
Create or download the splash screen of your choice, it can be up to 320x320 and 96 dpi. Save the file as welcomehead.96.png and save it to the /windows directory of your device. You may need Resco Explorer or a similar tool to overwrite the current file.
The image should appear when you reboot.
I will attach some splash images below over the next several days.
How do I change the boot splash? From this post: http://forum.xda-developers.com/showpost.php?p=1140696&postcount=6
A method for 1.01 MFG can be found on the wiki; if you do not want to SuperCID your device permanently though, you need to use SSPL-HERM.exe.
Requirements
nb_image_converter.exe, e.g. from Hermes SplashScreen_Pack.zip
nbhgen.exe, e.g. from this forum topic
any official ROM image
Full steps
Create a BMP file in paint, size must be 240x320.
Save it as BMP 24bit.
Load it on nb_image_converter.exe and save it as splash.nb
open a cmd.exe command prompt on the folder where you saved your splash
run this command
copy /b splash.nb+padding.nb finalsplash.nb
Check that filesize of "finalsplash.nb" is exactly 262144 bytes.
create a samples.txt with the following contents
HERM200
HTC__001
1.23.707.6
USA
600,finalsplash.nb
601,finalsplash.nb
You may need to adjust HERM200 to HERM100 or HERM300 based on your model).
And you can have a different subsplash if you repeat steps 1 to 5 with a different file.
run the following command on a shell in the same folder:
nbhgen.exe sample.txt
extract the ROM image, e.g. with WinRAR
rename the .nbh file inside that folder to .bak
move your newly generated RUU_signed.nbh into the same folder
put SSPL-HERM.exe onto your device
run SSPL-HERM.exe on the device
check that the Tricolor screen will appear and show SPL-1.09.ds
run ROMUpgradeUt.exe
List compiled from three different existing tutorials - credits go to those! - and tested successful yesterday From CCRDude
I have only included files that I have created in this first post. If you would like your files added, please let me know. Both the PNG and JPG are included in the zip.
-mix
How do I add today themes to my device?
You can simply drag and drop the .tsk files into the my documents folder on your device using activesync.
kyphur has a page loaded with great themes
Feel free to post your favorite today theme's.
-mix
This post left open for uploads.
Something from me
Hope some one likes it
Radical_MT said:
Hope some one likes it
Click to expand...
Click to collapse
The skull picture is exactly the same as one made by a moderator on a well known pocket pc warez site for use as a theme!
I wonder why some people are so obsessed with skulls.
Here is a welcomehead.96.png file (to replace the windows 96 startup screen) for all you Mac users who have to use windows for your mobile environment, (for now, at least).
backfindpost
sorry, just an ordinary bvp
m-unit said:
sorry, just an ordinary bvp
Click to expand...
Click to collapse
To quote Chris Farley: I'm sorry, I don't speak Japanese.
boz said:
The skull picture is exactly the same as one made by a moderator on a well known pocket pc warez site for use as a theme!
Click to expand...
Click to collapse
I took this skull pic from somewhere msn themes. Sorry if i'm stealing someone else pics. Lol. What about this one?
Hi there!
Liked a lot this Skull!
Can you provide in a CAB format?
thanks
Radical_MT said:
Hope some one likes it
Click to expand...
Click to collapse
Doubt...
Could someone help me?
I dind't understand what I have do to in this part:
(...)
run the following command on a shell in the same folder:
nbhgen.exe sample.txt
extract the ROM image, e.g. with WinRAR
rename the .nbh file inside that folder to .bak
move your newly generated RUU_signed.nbh into the same folder
put SSPL-HERM.exe onto your device
run SSPL-HERM.exe on the device
check that the Tricolor screen will appear and show SPL-1.09.ds
run ROMUpgradeUt.exe9
Click to expand...
Click to collapse
I'd like to create a new splash screen with HTC official logo:
I created a finalsplash.nb and the .txt, but now I don't know what I have to do... :\
Hi,
Look here http://www.molski.biz
Click on How to and search for the Molski development Kitchen ROM. You find answers to this and more doubts you may have!
Good luck!
hiroshi.rio said:
Could someone help me?
I dind't understand what I have do to in this part:
I'd like to create a new splash screen with HTC official logo:
I created a finalsplash.nb and the .txt, but now I don't know what I have to do... :\
Click to expand...
Click to collapse
Thanx a lot, but...
epimazzo,
Thanx a lot, but it didn't work...
I already read this tutorial here on forum, but the problem is: I wanna change only the first splash screen, not the 1st n 2nd.
Can I use this program to create only the first splash screen with HTC's logo? Cos the 2nd splash screen I'm using this:
I just made this for my 8525 startup animation.
Now all I need is a scary laugh to replace the standard wav..
hiroshi.rio said:
Could someone help me?
I dind't understand what I have do to in this part:
I'd like to create a new splash screen with HTC official logo:
I created a finalsplash.nb and the .txt, but now I don't know what I have to do... :\
Click to expand...
Click to collapse
This is what you have to do...
* YOU NEED BOOTLOADER 1.01MFG ON YOUR DEVICE FOR THIS TO WORK *
For full instructions see:
http://wiki.xda-developers.com/index.php?pagename=Hermes_BootloaderMFG
Hermes Splash Screen Howto
---------------------------
Create a BMP file in paint, size must be 240x320.
Save it as BMP 24bit.
Load it on nb_image_converter.exe and save it as splash.nb
open a cmd.exe command prompt, go to folder where you saved your splash
run this command:
copy /b splash.nb+padding.nb finalsplash.nb
Filesize of "finalsplash.nb" should be exactly 262144 bytes.
Now put your phone in bootloader mode (side ok + power button + softreset)
Connect to bootloader using mtty.exe and load splash screen using these commands:
For first splash screen (MainSplash):
USB> task 32
USB> lnb finalsplash.nb 500e0000
USB> task 8
For Second splash screen (SubSplash):
USB> task 32
USB> lnb finalsplash.nb 50140000
USB> task 8
You dont need BOOTLOADER 1.01MFG,
Read MrVanx's guide http://www.mrvanx.org/cms/index.php?option=com_content&task=view&id=20&Itemid=27
and follow it word for word.
If you dont want to replace the second splash then either dont include the SubSplash or use the existing one you have.
I followed his guide yesterday and it worked perfectly for me and ive got SPL:2.10.oli
I downloaded a screen splash on this thread:
http://forum.xda-developers.com/showthread.php?t=292014
I changed the second splash screen to WM crossbow only with a simple .cab. Can I create a .cab to install on device? It seems more easy... :?
Hey,
does anybody known how to replace the splash screen on the HTC Athena the one that says T Mobile I would like to put one of my own.
Please advice me how to do it.
Thank You
Gigino
You can search in XDA in the section Ultimate.... But I believe it's like this: Via Resco Explorer you can find the file "welcomehead.192.png", it's in the "windows" section. This is the splash screen.
You have to replace it with an other picture that is even big 640 x 480.
Good luck!
welcomehead.192.png readonly
Replacing will be a bit difficult, because it is placed at the ROM.
Well, try to replace it with your next ROM-Update.
...
Have fun.
If you browse or explore unsing activesync/wmdc you can easily replace the welcomehead file even though it is in rom
First Splash screen
The file you said to replace is the green windows mobile splash screen (the 2nd splash screen to display) I'd like to replace the very first picture which on my ameo is the T-mobile one any ideas? I used picture manager to view all the pictures in the windows folder as I can't seem to locate the Windows folder when connected to the PC.
The first splash screen is normaly part of the rom that doesnt show up in the filesystem.
Splash image uploaders have been made for other devices/os's but require technical knowledge of the system.
Its not a file delete/replace or anything.
You will have to wait untill one of the forum gods create a bootsplash uploader for the Athena.
So is there a easy way to replace the "welcomehead.192.png" file then?
/Magnus
Hello everyone, I am just asking if it is possible to flash different splash screen on Titan? First screen you see like VZW xv6800 say VERIZON on white background before animated gif startup begin (VZW_Startup.gif) so.. can I change the VERIZON? Thanks!
Hiromitsu
Look on in your \windows dir on your PPC for any .png & gif files that look like the ones that initiate when your phone starts. For the Sprint Mogul & Alltel PC6800, one of the spash screens is called welcomehead.96.png on both.
Once you find the stock .png & gif files on \windows, rename any custom animated pic after the .gif file and do the same for a .png pic. Then copy into \windows using Total Commander, etc and overwrite. Also make sure that they are the same 320x240 size.
So lets say on your VX6800 that you have a splash screen called VZW_6800.96.png in your \windows dir thats starts up with your phone now... You would:
1. Load, edit and rename YOUR 320x240 custom pic VZW_6800.96.png using Paint on your PC.
2. Paste pic into a folder somewhere on your device that you can access.
3. Using Total Commander, Copy this pic into \windows and a screen asking you to overwrite will popup. Click yes.
4. Done.
Do the same for a .gif.
1. Load, edit and then name YOUR 320x240 custom .gif, VZW_Startup.gif on your PC.
2. Paste .gif into a folder somewhere on your device that you can access.
3. Using Total Commander, Copy this pic into \windows and a screen asking you to overwrite will popup. Click yes.
4. Done.
welcomehead.96.png does exist on the XV6800. It is not the verizon splash though. That is the WM splash screen.
Yes, VZW splash is load from ROM so need cook in kitchen for this one. I just want know how to change this only. I already change animate GIF and WM screen.
Hiromitsu
blazingwolf said:
welcomehead.96.png does exist on the XV6800. It is not the verizon splash though. That is the WM splash screen.
Click to expand...
Click to collapse
I didnt know if it existed or not; I was using it as a reference for what to look for and how to go about accomplishing it. I hear Verizon & Sprint have animated startups whereas the Alltel 6800 does not. But we do have the welcomehead.96.png. I do not believe that you must cook a new rom to make these changes...
I have explain this plainly already,,
for VZW Titan XV6800....
There 3 startup splash,,
In ROM:
1.) Solid white screen not moving VZW logo. (15 sec)
In device:
2.) Animate VZW logo -> VZW_Startup.gif (10 sec)
3.) WM Startup wallpaper -> welcomehead.96.png (Varies)
If I install other carrier ROM,, first still image (VZW) is VZW... even though change carrier ROM... so its burn in boot code.....
these images will be available when verizon releases a rom update. the current verizon rom available was dumped from a running xv6800 and does not include the images you want, which are mainsplash.nb and subsplash.nb. these are separate from os.nb, all are contained in the nbh you flash. the dumped verizon rom available only included os.nb
dcd,,
Can I replace mainsplash.nb and subsplash.nb now?
If I make my own splash nb file I can already flash it?
Thanks
Hiromitsu
argh
use nb_image_converter_859_418_826.exe found here: http://forum.xda-developers.com/showthread.php?t=253308
use nbhgen found here:
http://forum.xda-developers.com/showthread.php?t=294046
use this config:
TITA1000
HTC__001
2.17.651.0
USA
600,01_MainSplash.nb
601,02_SubSplash.nb
all of this info found easily using search feature at xda forums
I've just managed to ahem, persuade Orange UK to sim unlock my Niki 12 weeks early.
The next thing I'd like to do is replace the orange boot splash screen to one of my own.
Maybe with one of R'kids stunning paintings http://www.artworkbysteve.co.uk/
Do I first need to CID unlock my Niki to do this?
Is there any software that is capable of doing this without bricking my phone?
I've done this previously with my wizard, but I'm still a little unsteady on my feet,
I need clear easy to follow step by step newbie instructions if anybody has the time.
Any help greatly appreciated,
Cheers.
Interested too
/Windows/animated.gif
in "animated.zip" there is the original boot splah of htc.
with "Advanced Configuration Tool" (http://forum.xda-developers.com/showthread.php?t=317070) is possible to change the default location of startup animation's file.
garsim said:
/Windows/animated.gif
in "animated.zip" there is the original boot splah of htc.
with "Advanced Configuration Tool" (http://forum.xda-developers.com/showthread.php?t=317070) is possible to change the default location of startup animation's file.
Click to expand...
Click to collapse
Great! tanx
Resaponse
....But can I do this without CID unlock me ole mucker?
garsim said:
/Windows/animated.gif
in "animated.zip" there is the original boot splah of htc.
with "Advanced Configuration Tool" (http://forum.xda-developers.com/showthread.php?t=317070) is possible to change the default location of startup animation's file.
Click to expand...
Click to collapse
Damn, doesnt work. It always show the orange logo in startup
any idea?
tanx
ariandax said:
any idea?
Click to expand...
Click to collapse
nothing
To change the actual boot splash which contains the operator logo and ROM info text you need to flash it! the TD (Niki) has 4 splash screen as follows:
1-Primary Splash (Operator Logo)
2-Secondary Splash again operator logo with the ROM Protocol info at the bottom of screen in red.
3-Splash Gif animation
4-Splash Welcomehead i.e. WM6 splash you get before Today loads.
Splash 3 and 4 can easily be changed as mentioned here. I think what you need is to change Splash 1 and 2 if you want to get rid of the Orange logo however this can only be done through flashing (via customRUU) so you must make sure your TD has HardSPL otherwise you will end up bricking the device if you haven't check this thread:http://forum.xda-developers.com/showthread.php?t=355730
At the moment I can only change the 1st Splash but can't seem to change the 2nd splash once I can figure out how, I will post the necessary files here
Here is a thread that shows how change your PrimarySplash screen. You do need to flash it, but its not that hard to do.
http://forum.xda-developers.com/showthread.php?t=361287
second one is easy to change. Just rename any .png picture to welcomehead.96.png and put in Windows folder on phone, replacing the one that's there. Then soft reset.
Thanks
Cheers fellas, I appreciate your help.
odd problem with Welcomehead 96
Tried overwriting the welcomehead.96 file but it can't be overwritten,
checked the properties of the file and all the options (read only etc) are greyed out?
Copied the file to my hard drive and it cannot be seen, even when I have the show hidden files folder option checked?
I'd hazard a guess that the PNG file is hard coded to the memory chip? so a Rom flash may be needed?
But I still can't work out why the copied PNG on my hard drive would behave the way it is,
maybe just having a thick attack.
I haven't come across this before, can anyone shed some light on it?
martinartois said:
Tried overwriting the welcomehead.96 file but it can't be overwritten,
checked the properties of the file and all the options (read only etc) are greyed out?
Copied the file to my hard drive and it cannot be seen, even when I have the show hidden files folder option checked?
I'd hazard a guess that the PNG file is hard coded to the memory chip? so a Rom flash may be needed?
But I still can't work out why the copied PNG on my hard drive would behave the way it is,
maybe just having a thick attack.
I haven't come across this before, can anyone shed some light on it?
Click to expand...
Click to collapse
You can't overwrite files in the windows folder with the built in file explorer use Resco File Explorer or download freeware Total Commander from here: http://www.ghisler.com/pocketpc.htm
Thanks
Cheers gfreek,
I overwrote welcomehead 96 as recommended with Total Commander.
Thanks for your assistance, it's appreciated.
gfreek said:
At the moment I can only change the 1st Splash but can't seem to change the 2nd splash once I can figure out how, I will post the necessary files here
Click to expand...
Click to collapse
Here's how I changed both the 1st & 2nd Splash screens on my Wife's Touch Dual:
First create two splash screens (.i.e. PrimarySplash.nb & SecondarySplash.nb) using the methods & tools mentioned in PDAViet site.
1. Use Dark Simpson HTC ROM Tool
2. Select 'Hermes' as device
3. Fill in 'NIKI***' as Model ID (Instead of 'HERM***')
4. Select your Primary & Secondary Splash
5. Create the NBH file
6. Flash with the Touch Dual CustomRUU extracted from Niki Project's ROM.
Cheers!
[email protected] said:
Here's how I changed both the 1st & 2nd Splash screens on my Wife's Touch Dual:
First create two splash screens (.i.e. PrimarySplash.nb & SecondarySplash.nb) using the methods & tools mentioned in PDAViet site.
1. Use Dark Simpson HTC ROM Tool
2. Select 'Hermes' as device
3. Fill in 'NIKI***' as Model ID (Instead of 'HERM***')
4. Select your Primary & Secondary Splash
5. Create the NBH file
6. Flash with the Touch Dual CustomRUU extracted from Niki Project's ROM.
Cheers!
Click to expand...
Click to collapse
Thanks for pointing me in the right direction! Followed as per your instruction and finally got both 1&2 splash changed however both splash's are about 10-15 pixel off center to the right, with the bottom part being black:-/ see attached images below;
I can't understand why??? am I missing something? all the splash I've used are QVGA 240x320 so they are the correct size!!
Appreciate your help on this one!
***SOLVED***
gfreek said:
Thanks for pointing me in the right direction! Followed as per your instruction and finally got both 1&2 splash changed however both splash's are about 10-15 pixel off center to the right, with the bottom part being black:-/ see attached images below;
I can't understand why??? am I missing something? all the splash I've used are QVGA 240x320 so they are the correct size!!
Appreciate your help on this one!
Click to expand...
Click to collapse
Update***SOLVED*** Once again thanks [email protected] for pointing me in the right direction however, to create the two splash (.i.e. PrimarySplash.nb & SecondarySplash.nb) using the methods & tools mentioned in PDAViet site and here: http://forum.xda-developers.com/showthread.php?t=361287 is "NOT COMPATIBLE WITH NIKI" hence the reason I ended up getting corrupted splash screens (see the images in my last post)
The Correct Procedure is as Follows:
1. Make sure you have HardSPL installed if not get it here: http://forum.xda-developers.com/showthread.php?t=355730
2. Create a BMP file in paint, size must be 240x320, save it as BMP 24bit.
3. Get SplashTool from here: http://forum.xda-developers.com/showthread.php?t=334904
4. Load your BMP on nb_image_converter (included in SplashTool's zip) and save it as PrimarySplash do the same load another BMP and this time save as SecondarySplash
5. Open SplashTool.exe and convert both PrimarySplash.nb and SecondarySplash.nb to new format.
6. Use Dark Simpson HTC ROM Tool get it here: http://forum.xda-developers.com/showthread.php?t=311909
7. Select 'Hermes' as device
8. Fill in 'NIKI***' as Model ID (Instead of 'HERM***')
9. Select your Primary & Secondary Splash
10. Create the NBH file
11. Flash with the Touch Dual CustomRUU get it here: http://forum.xda-developers.com/showthread.php?t=356259
Enjoy your new splash screen
Credits to Pof, MadKat, Dark Simpson, Jockyw2001 and Midget_1990!!!!
P.S. For those of you who are getting the vista "COMDLG32.OSX" error when trying to run madkat's NB image converter download and install the attached file and re-run the convertor should work
gfreek said:
Update***SOLVED*** Once again thanks [email protected] for pointing me in the right direction however, to create the two splash (.i.e. PrimarySplash.nb & SecondarySplash.nb) using the methods & tools mentioned in PDAViet site and here: http://forum.xda-developers.com/showthread.php?t=361287 is "NOT COMPATIBLE WITH NIKI" hence the reason I ended up getting corrupted splash screens (see the images in my last post)
The Correct Procedure is as Follows:
1. Make sure you have HardSPL installed if not get it here: http://forum.xda-developers.com/showthread.php?t=355730
2. Create a BMP file in paint, size must be 240x320, save it as BMP 24bit.
3. Get SplashTool from here: http://forum.xda-developers.com/showthread.php?t=334904
4. Load your BMP on nb_image_converter (included in SplashTool's zip) and save it as PrimarySplash do the same load another BMP and this time save as SecondarySplash
5. Open SplashTool.exe and convert both PrimarySplash.nb and SecondarySplash.nb to new format.
6. Use Dark Simpson HTC ROM Tool get it here: http://forum.xda-developers.com/showthread.php?t=311909
7. Select 'Hermes' as device
8. Fill in 'NIKI***' as Model ID (Instead of 'HERM***')
9. Select your Primary & Secondary Splash
10. Create the NBH file
11. Flash with the Touch Dual CustomRUU get it here: http://forum.xda-developers.com/showthread.php?t=356259
Enjoy your new splash screen
Credits to Pof, MadKat, Dark Simpson, Jockyw2001 and Midget_1990!!!!
P.S. For those of you who are getting the vista "COMDLG32.OSX" error when trying to run madkat's NB image converter download and install the attached file and re-run the convertor should work
Click to expand...
Click to collapse
Oh.......Same post for me
http://forum.xda-developers.com/showthread.php?t=367370
Anyway u faster 30 seconds gfreek
tom_codon said:
Oh.......Same post for me
http://forum.xda-developers.com/showthread.php?t=367370
Anyway u faster 30 seconds gfreek
Click to expand...
Click to collapse
Kudos to you tom!! sorry if I double posted in any case I think yours is a much simpler neater method then the one I've posted here
thanks.
Un Saludo.