Related
Please help me!
I screwed my MDA Vario II. I used HTC universal sim unlocker and I haven’t got radio. I know I was a craze.
No GSM, no cid and no imei. The pda is working good.
I vas very happy when I find this site :
http://wiki.xda-developers.com/index.php?pagename=Hermes_UpgradeProblems.
I made this:
USB>
USB>password 0000000000000000
HTCSPass1.CMˆËHTCEUSB>set 1e1
USB>erase a0040000 c80000
HTCST ÚČŇHTCEUSB>erase a0cc0000 c80000
HTCST ÚČŇHTCEUSB>erase a1940000 640000
HTCST ÚČŇHTCEUSB>set 1e 0
USB>
The radio doesn’t work , no GSM, no cid and no imei. The pda is working good.
Please help me
Please can a expert check this!?
I found this with the search option.... can someone check this....
Its written for the Tytn and not for the Vario II, i'm not sure but i thought that the english Vario II has a 1.06 bootloader!! Then you are stuck, beacause the file who degrade your bootloader to 1.04 isnt availleble anymore. Maybe one of the guys here can share it with you?!
======================================================
- Take the battery out of your TyTN and leave it out several minutes
- Disable USB-connection in Active-Sync
- Reboot your Computer
- Replace the battery and put your TyTN in the bootloader
- Try to load the ROM found here:
ftp://xda:[email protected]/RUU120_172125_Qtek_WWE_R11400_Shipping.exe
- Keep trying till you get just past the erasing part, then you will get an error-message and are asked to reset your device with the stylus
- Reset your phone and put it back in the bootloader mode
- Install any Hermes ROM you like, no matter what CID if you have bootloader 1.04
lacika said:
The radio doesn’t work , no GSM, no cid and no imei. The pda is working good.
Click to expand...
Click to collapse
Can you attach a USB monitor capture of what happens when you try to:
a) flash a rom
b) flash a radio rom
Do both things starting from bootloader and with activesync disabled.
Same Problem
I have the same problem
My PDA keeps comming back in the bootloader screen.
When 1 try to update (its a unlockes pda), the upload stops at 1%
Is there a way to erease the PDA ?
Thanks
pimmmm said:
I have the same problem
Click to expand...
Click to collapse
I have the same questions.
Can't do anyithing if you don't attach a USB capture of the process. See this page for instructions: common upgrade problems
smarty77 said:
I found this with the search option.... can someone check this....
Its written for the Tytn and not for the Vario II, i'm not sure but i thought that the english Vario II has a 1.06 bootloader!! Then you are stuck, beacause the file who degrade your bootloader to 1.04 isnt availleble anymore. Maybe one of the guys here can share it with you?!
======================================================
Click to expand...
Click to collapse
HI!
Thank You for your answer. I made yours tip, but not was good.
First I to try smarty77 tip. I used RUU120_172125_Qtek_WWE_R11400_Shipping. Its function. After I’d like rom upgrade. This doesn’t was good (invalid vendor).
Second I to try clearing with mtty.exe.
The situation same, the phone doesn’t work.
Sorry my bad English.
pof said:
Can you attach a USB monitor capture of what happens when you try to:
a) flash a rom
b) flash a radio rom
Do both things starting from bootloader and with activesync disabled.
Click to expand...
Click to collapse
HI!
Thank You for your answer. I made yours tip, but not was good.
First I to try smarty77 tip. I used RUU120_172125_Qtek_WWE_R11400_Shipping. Its function. After I’d like rom upgrade. This doesn’t was good (invalid vendor).
Second I to try clearing with mtty.exe.
The situation same, the phone doesn’t work.
Sorry my bad English.
Just seen your capture but it's not good.. you made a "basic" capture which shows nothing important, please repeat the process again, but this time read point 6:
In the upper part there are two tabs: basic and complete. Click on "Complete".
I cannot help unless I have a complete capture to see the problem.
pof said:
Just seen your capture but it's not good.. you made a "basic" capture which shows nothing important, please repeat the process again, but this time read point 6:
In the upper part there are two tabs: basic and complete. Click on "Complete".
I cannot help unless I have a complete capture to see the problem.
Click to expand...
Click to collapse
HI POF!
Thank you four your help.
It is a new captured files.
Please help me. You are a last chance, for my phones.
Lacika
@lacika:
When checking the seclevel (task 32 bootloader command) your phone replies:
Code:
CID: Wait interpreter timeout.
Level=FF
After that when checking the CID with 'info 2' your phone replies:
Code:
HTCS...?\0.?f..|HTCE
This should be something like T-MOB001 if you have a Vario II from UK, so the CID is screwed.
I can see from the output of 'info 3' that you're running bootloader 1.06.
Then you try to flash the 1.18.255.3 ROM from HTC, which has CID "QTEK_001", you won't be able to flash this image in your device with bootloader 1.06, even if the CID was not screwed you will always get an error (you need bootloader 1.04 to bypass CID checking, and you are in 1.06), the error you're getting from bootloader is:
Code:
CID not allow (255)
As you said you can use the PDA (WinCE boots) what I suggest is buying imei-check unlocker (you need activesync working too for running the imei-check unlocker), because it will downgrade your bootloader to 1.04 and patch your radio... probably it can fix your device, at least it will downgrade your bootloader to 1.04. If after running the unlocker your device doesn't work I suggest that you try to flash a radio ROM, you can find them here:
http://wiki.xda-developers.com/index.php?pagename=Hermes_ExtractedRadioRoms
Let me know how it goes
pof said:
As you said you can use the PDA (WinCE boots) what I suggest is buying imei-check unlocker (you need activesync working too for running the imei-check unlocker), because it will downgrade your bootloader to 1.04 and patch your radio... probably it can fix your device, at least it will downgrade your bootloader to 1.04.
Click to expand...
Click to collapse
Err... I forgot that your IMEI is also screewed, probably imei-check unlocker will not work on your Hermes even if you provide them the right IMEI, because it will not be able to read the IMEI from your phone (will get the wait interpreter timeout too...). anyway... it costs 20GBP, give it a try!
pof said:
@lacika:
As you said you can use the PDA (WinCE boots) what I suggest is buying imei-check unlocker (you need activesync working too for running the imei-check unlocker), because it will downgrade your bootloader to 1.04 and patch your radio... probably it can fix your device, at least it will downgrade your bootloader to 1.04. If after running the unlocker your device doesn't work I suggest that you try to flash a radio ROM, you can find them here:
http://wiki.xda-developers.com/index.php?pagename=Hermes_ExtractedRadioRoms
Let me know how it goes
Click to expand...
Click to collapse
Hi and thanks!
I’ve got one question. I use imei-check unlocker after I’ll got 1.04 bootloader?
Lacika
I tried that with my device before it got sent to service, I brought imei-check unlocker but as my imei was also corrupt it will not work, so I would not waste GDP 20 if you have corrupt imei.
They will not refund either becuase its your problem the imei is corrupt.
lacika said:
I use imei-check unlocker after I’ll got 1.04 bootloader?
Click to expand...
Click to collapse
No, imei-check unlocker will downgrade your bootloader, BUT as shark1 says, it will not work because your IMEI is corrupted and it will not be able to read it.
I guess the best would be to send the unit to the repair centre then...
pof said:
@lacika:
As you said you can use the PDA (WinCE boots) what I suggest is buying imei-check unlocker (you need activesync working too for running the imei-check unlocker), because it will downgrade your bootloader to 1.04 and patch your radio... probably it can fix your device, at least it will downgrade your bootloader to 1.04. If after running the unlocker your device doesn't work I suggest that you try to flash a radio ROM, you can find them here:
http://wiki.xda-developers.com/index.php?pagename=Hermes_ExtractedRadioRoms
Let me know how it goes
Click to expand...
Click to collapse
Hi!
I’ve got a new problem.
I used a M3100v3cUnlock.exe program. This doesen’t read my imei number.
I don’t know how can I flash my bootloader.
Lacika
pof said:
No, imei-check unlocker will downgrade your bootloader, BUT as shark1 says, it will not work because your IMEI is corrupted and it will not be able to read it.
I guess the best would be to send the unit to the repair centre then...
Click to expand...
Click to collapse
I had the same problem! Send it to orange assistance.
lacika said:
I used a M3100v3cUnlock.exe program. This doesen’t read my imei number. I don’t know how can I flash my bootloader.
Click to expand...
Click to collapse
You can't, and your imei is screwed, the unlocker can't check it... so you should better send the unit to the repair centre as suggested.
pof said:
You can't, and your imei is screwed, the unlocker can't check it... so you should better send the unit to the repair centre as suggested.
Click to expand...
Click to collapse
HI!
I’ve got a last question.
It will a new procedure, program, with I can flashing my bootloader.
Lacika
Hi all,
I know this has been asked and answered lots of times, I have read all the wiki posts I could find, but still I'm not 100% sure that I understand correctly, hence this question.
I have a Dopod 838 Pro (Hermes) which I have SuperCID'ed and loaded with bootloader 1.09.
My ppc gets stuck on the windows mobile screen, and in addition I can see in the HTC subsplash screen the "NO GSM" indicator for a flick of a second.
I can go into bootloader and connect with mtty.
In another thread (and also in the wiki), it is suggested that the only way to get my machine back, is first to downgrade to SPL 1.04, and the only way to do this since I'm at 1.09 and no windows, is to purchase the IMEI-CHECK tool .
Am I correct in understanding this? or is there another way?
Thanks for any and all help.
Chris
No, I think you quit reading a bit soon.
With the new unlocker v3 and Des' SSPL flashing method, you no longer need to downgrade from 1.09 to flash anything. Simply find the newest version of the ROM and Radio you are trying to load and run the exe. Hard to believe, but it's really that easy.
Hi and thanks for the reply,
will the v3 unlocker work even if I cant boot my ppc and so I cant connect with activesync?
The only thing I can do, is boot into bootloader on the ppc and connect using the mtty tool.
Can I still use the method you suggest?
Thanks again,
Chris
T-mobile unlocker bootloader 1.09
chrisvor said:
Hi and thanks for the reply,
will the v3 unlocker work even if I cant boot my ppc and so I cant connect with activesync?
The only thing I can do, is boot into bootloader on the ppc and connect using the mtty tool.
Can I still use the method you suggest?
Thanks again,
Chris
Click to expand...
Click to collapse
Im having the same problem
Hi X01HT Rock....
can I ask u a favor? If you find a solution please PM me... I will do the same
thanks
Chris
you can't use the unlocker unless you can copy it to the device and run it from there.
from xda wiki
Problem 5: Device shows NO GSM when booting
* The radio stack is screwed, you don't get GSM signal and the phone says unknown SIM status
* Device won't start after trying to unlock it with HTC Universal Unlocker (HTC_Uni_SIM_Unlock_v1)
Here is how to fix it:
1. Disable activesync on your computer by right click on activesync icon -> connection settings -> uncheck "allow USB connections".
2. Put your Hermes in bootloader mode
3. Connect device to computer using USB cable.
4. Open mtty.exe and select USB port, then connect.
5. Hit enter twice, you will see the "USB>" prompt.
6.
Type the following commands (do not copy paste!!!)
USB> password 0000000000000000
USB> set 1e 1
USB> erase a0040000 c80000
USB> erase a0cc0000 c80000
USB> erase a1940000 640000
USB> set 1e 0
7. Reset your phone and put it back in bootloader mode
Click to expand...
Click to collapse
now copy unlock v3 to your phone, and run on the phone.
download radio 1.34 and run on your pc, while your device and pc is in activesync mode.
I believe all of this is in the wiki.
lpsi2000 said:
I believe all of this is in the wiki.
Click to expand...
Click to collapse
yeah, but the guy's device is locked with a 1.09 bootloader. we might need POF's help here.
please PLEASE guys, i need your help here (POF are you reading this?)
My machine was made SuperCID using v2a before all this sh*t happened and it was running smoothly.
It now seems that some of the mtty commands I read and tried to apply resulted in the SuperCID status to go away and now it's *scrambled* (info 2 results in "HTCSF kEØ(HTCE"). So now I cannot flash ANY rom into it even if I could.
I get to the bootloader (SPL 1.09) and also up to the windows mobile splash screen.
Also at the HTC subsplash I can see the "No GSM" msg for a fraction of a second.
Please help me unbrick this baby. I can't afford to buy another one
cant run the mtty that way
I have tried to run the password and every thing it I am having some problems with the communication
HTCST ÚÈÒHTCEUSB>
USB>password 0000000000000000
HTCSPass1.CMˆËHTCEUSB>set 1e 1
USB>erase a040000 c80000
HTCST ÚÈÒHTCEUSB>erase a0cc0000 c80000
HTCST ÚÈÒHTCEUSB>erase a01940000 640000
HTCST ÚÈÒHTCEUSB>set 1e 0
USB>
this is what happens then I try to rest the phone but it just goes back to whatit was doing.
I think that I have a language problem here.
chrisvor said:
My machine was made SuperCID using v2a before all this sh*t happened and it was running smoothly.
Click to expand...
Click to collapse
SuperCID unlocker v2a would not have worked on SPL 1.09. It might have said that unlocked successfully, but it wont have unlocked. Only unlocker 3 will unlock a SPL 1.09 phone. You'll have to keep hammering on the "bricked hermes" sticky. Someone will get round to helping you in a day or two.
I put this in the wrong place and cannot delete. Sorry for the misspost.
Hello,
I have seen on the Universal thread a way to completly format the device. After that lot of people who were stuck in windows mobile screen have recovered their device.
I dont know if it is working with hermes.
http://forum.xda-developers.com/showthread.php?t=289325
X01HT Rock said:
Im having the same problem
Click to expand...
Click to collapse
Me too....!!!! Can't solve this problem
.VIBE said:
you can't use the unlocker unless you can copy it to the device and run it from there.
from xda wiki
now copy unlock v3 to your phone, and run on the phone.
download radio 1.34 and run on your pc, while your device and pc is in activesync mode.
Click to expand...
Click to collapse
I did what you said before but can't solve the problem
.VIBE said:
SuperCID unlocker v2a would not have worked on SPL 1.09. It might have said that unlocked successfully, but it wont have unlocked. Only unlocker 3 will unlock a SPL 1.09 phone. You'll have to keep hammering on the "bricked hermes" sticky. Someone will get round to helping you in a day or two.
Click to expand...
Click to collapse
@.VIBE:
My original SPL at the time when I applied v2a unlocker was 1.01, and v2a unlocked it, I verified it with "info 2" in mtty just after, and also after all this mess started.
Something I did while trying to get out of this mess, changed my SuperCID status and corrupted it.
Is there a way to make it superCID again if the only thing I can connect with is mtty?
Thanks
Chris
You guys with bricked phones need to carefully read and understand ALL of the "dead hermes? corrupted radio? Post comments here" sticky!
Everything that POF currently knows on unbricking your device is in there also Superdave has some help for those who can get into KITL mode. Even then not every brick is recoverable at the moment, but you need to spend some time reading to find out!!
I've noticed that POF's not as quick as he used to be in replying to these kind of threads, I surmise he could be a little fed up with repeating the same thing over and over again, but I could be wrong.
Best of luck to you and my advice at the moment to anybody else coming across this is to SuperCID your phone and always try to keep your bootloader at SPL 1.04 (upgrade using mtty) as it makes recovering from bricked phones much easier.
Im having the same problem
There Is A Way Of Downgrading From 109.
Search Google For Downgrade_SPL Then Do This.
1. Go to Google, search for DownGrade_SPL.rar
2. Connect your tytn to PC and wait until activesync completed.
3. Run M3100v3cUnlock.exe. Once you see checking device.... in DOS box and whilte screen on your tytn, close the program (Dos box) immedaitely.
4. Run ROMUpgradeUt.exe and follow the japanese wizard to complete the boot loader downgrade.
5. Reboot your tytn and then put it into bootloader mode agian, you should see SPL-1.04. Great!
Cheers
@Mousey
You need to be able to fully boot into the OS to connect to activesync and the phones described here can't. The only other way I know of downgrading from 1.09 to 1.04 is from KITL mode which not all ROMS have. Full details are in the sticky I mentioned earlier.
Heh apologoies for title but im really stuck and desperate for any help!!
I have been trying to unlock my Cingular 8525 for many hours now without any luck.
I bought it off ebay knowing it was locked because I had seen these forums and knew it wasnt too harder job. I live in NZ we have a compatible 3G network here (they sell these phones branded as JasJams).
Anyway I dont have a cingular sim card, only a Vodafone NZ simcard. I dont know if that is a problem for me or not...
My problem is that I get part way through the update process and the connection between pc and phone gets cut everytime at the same place.
On my bootload screen during the setup it says
HERM100 IPL-SSPL by Des
HERM100 SPL-1.09.ds
and then
HERM100 IPL-1.01
HERM100 SPL-1.40.Olipro
Then I tick the appropriate checkboxes, I HAVE to soft reset my phone here to get it to sync up with my PC again, I dont think this should be a problem though,
It then gives me the button to select the Update button (Update the radio and bootloader)
So I click that, it gives the next screen, click next, tells you its going to take 10 minutes etc, so click next,
It then instantly disconnects the active sync connection and about a minute later I get an error screen saying the unlocker encountered communications errors.
I have been through this whole proccess 6 times now with no joy
Someone pleeeeeeeeease help me
Thanks
im willing to pay for a code all i want is a unlocked sim phone none of this radio stuff etc
try Wiki
http://wiki.xda-developers.com/
or alternatively
http://www.mrvanx.org/cms/index.php?option=com_content&task=view&id=30&Itemid=27
Thanks but not really helpful, I have read the wiki through and through. I have tried that flashing HardSPL v7 and i get exactly the same problem.
PLEASE somebody help me
The only piece that is confusing is what to do once your done. The instructions say that you will be replacing your radio with a tweaked one to allow the unlock. After the entire process is done I assume you will need to have your favorite radio (1.40.3 in my case) handy to flash back onto your Hermes?
I also assume that flashing your favorite radio back to the Hermes won't lock it back again.
To be honest, I'd suggest going back to basics. You could try quite a few workarounds and end up doing this anyway..:
Reflash the original ROM your phone came with. Should be found easily via wiki.
Then you can start upgrading again.
If that's difficult, try flashing from your MicroSD card, which I've found never fails, having bricked my Hermes quite a few times now with my own cockamayme (sp) versions of ROMs that I've cobbled together from bits of code and chewing-gum.
as far as I know you dont need to CID unlock before flashing.... With olipro spl and custom RUU updater you can flash anything on your phone....
laurasaur, after you have installed 1.4 olipro, use custom RUU updater
http://forum.xda-developers.com/showthread.php?t=298737
use the RUU updater with your choice of Rom.
or if yo want to unlock the device before
http://forum.xda-developers.com/showthread.php?t=293665
amet said:
as far as I know you dont need to CID unlock before flashing.... With olipro spl and custom RUU updater you can flash anything on your phone....
laurasaur, after you have installed 1.4 olipro, use custom RUU updater
http://forum.xda-developers.com/showthread.php?t=298737
use the RUU updater with your choice of Rom.
or if yo want to unlock the device before
http://forum.xda-developers.com/showthread.php?t=293665
Click to expand...
Click to collapse
She want's to SIM-Unlock, not to CID-Unlock.
Do you use Vista? I encountered a similar problem with Windows Vista. Try a PC with Windows XP for the unlocking process.
ok my bad....
I've seen this issue with v1.4 Olipro. Upgrade bootloader to the latest Olipro 2.1 version then re-attempt.
ok thanks everyone for your advice but i am still screwed.
im not running vista.
i can not upgrade to olipro 2.1 because the upgrade utility always gets error 260 (update error) the update utility cannot connect to your PDA Phone.
I have now tried on 3 computers, my own, my parents and my work all resulting in the same thing.
I think now I will try and flash a WM6 rom onto my phone just using the olipro 1.4 and the custom RUU updater and see how I go but I dont have much hope
ok im currently updating the rom to wm6 as posted on the forums and oh my gosh i have a progress bar for the first time ever!! woot~~
um ok. now i have WM6 dopod version and fkn still sim locked someone help me before i throw my phone at the wall lol im going on holiday tomorrow and will have no phone for a week if i dont fix this in the next 3 hrs
Sim Unlock
http://forum.xda-developers.com/showthread.php?t=293665
laurasaur said:
On my bootload screen during the setup it says
HERM100 IPL-SSPL by Des
HERM100 SPL-1.09.ds
and then
HERM100 IPL-1.01
HERM100 SPL-1.40.Olipro
Then I tick the appropriate checkboxes, I HAVE to soft reset my phone here to get it to sync up with my PC again, I dont think this should be a problem though,
Click to expand...
Click to collapse
Do *NOT* soft reset your phone here, it is normal that activesync disconnects while the pda is in bootloader mode (activesync only works while OS is running). Just click "next, next, next" in the RUU and it will go fine.
woooa i think i love you Pof, I seriously do. Im not sure how I became such a noob at reading instructions but im sorry and thank you so much I now have progress bar
if you're short on time avoid any radio updates, they seem a bit hit and miss - its not worth upgrading then going away to find you've got a tossy signal!!!!
hope it worked out!
So i wanted to flash my cingular 8125 to windows mobile 6, so i downloaded this:
(BIG MISTAKE)
http://www.tradebit.com/filedetail.php/2559279-Software-Programs-Cell-Phone-Programs
and i followed the instructions and after i hard reseted my phone, it booted to a white screen. I have tryed reflashing, going into bootloader mode and reflashing, and i nothing helps.
can one of the experts on this forum please help me???!!!
thanks
i need help assap!! lol
i dont care even if i flash back to winmo5, I JUST WANNA UNBRICK
dahdout said:
So i wanted to flash my cingular 8125 to windows mobile 6, so i downloaded this:
(BIG MISTAKE)
http://www.tradebit.com/filedetail.php/2559279-Software-Programs-Cell-Phone-Programs
and i followed the instructions and after i hard reseted my phone, it booted to a white screen. I have tryed reflashing, going into bootloader mode and reflashing, and i nothing helps.
can one of the experts on this forum please help me???!!!
thanks
i need help assap!! lol
i dont care even if i flash back to winmo5, I JUST WANNA UNBRICK
Click to expand...
Click to collapse
What IPL/SPL it displays now ? ,Does it get into Bootloaders ? if it still does than download and flash 'wizard_love_rom' hope it'll recover back.
RE:
It just boots into a white screen. If i hold the camera and power buttons together it boots into bootloader mode, and says USB in the bottom corner. (when i am conncected via usb) but the problem is that active sync doesnt recognize it in bootloader mode. I have tried flashing it in many different ways and i have had no success.
When i go home i will try wizard_love_rom.
and as for the IPL/SPL, i will also check that when i get home.
Where can i download the wizard_love_rom?
Thanks for the help !
RE:2
Hello,
Mr IPL and SPL are both 2.25.0001
My GSM: 02.25.11
My OS: 2.18.0.0
Good News
So, I flashed my phone with the "Wizard_Love_2.26.10.2_WWE_Novii_CF2.rar"
which i found the download for over a quick google search, and now i want to update to winmo6 or 6.1.
Can you send me the link for the easiest way to do it on a G4 cingular 8125 (HTC Wizard.)
I have never CID unlocked, which was probably why i got the white screen earlier. but do i need to do it know that i am on the wizard love rom?
please help,
thanks
dahdout said:
So, I flashed my phone with the "Wizard_Love_2.26.10.2_WWE_Novii_CF2.rar"
which i found the download for over a quick google search, and now i want to update to winmo6 or 6.1.
Can you send me the link for the easiest way to do it on a G4 cingular 8125 (HTC Wizard.)
I have never CID unlocked, which was probably why i got the white screen earlier. but do i need to do it know that i am on the wizard love rom?
please help,
thanks
Click to expand...
Click to collapse
Glade its working again !
You got a G4 device,it cannot be CID unlocked,but however,it can be upgraded to wm6 or 6.1,read the methods 'HardSPL' or 'SoftSPL' posted as stickies in the G4 forum for upgrading to wm6 or 6.1.
re:3
thanks, you really saved me with your help!
dahdout said:
thanks, you really saved me with your help!
Click to expand...
Click to collapse
Thanks !
Glade you got it working
sorry, but i need help... again
Ok,
I know that this may be getting a little annoying for you and im sorry for that, but i need your help on this. I am currently running the wizard love rom. And I have Hard SCP'd.
I have to problems:
1. My EDGE doesn't work, i only get GPRS speed data.
2. I can't upgrade to any new rom..... i always get "ERROR [300] Get a newer update utility!"
How can I fix both of these problems?
I have searched forums and google and nothing has come up.
dahdout said:
Ok,
I know that this may be getting a little annoying for you and im sorry for that, but i need your help on this. I am currently running the wizard love rom. And I have Hard SCP'd.
I have to problems:
1. My EDGE doesn't work, i only get GPRS speed data.
2. I can't upgrade to any new rom..... i always get "ERROR [300] Get a newer update utility!"
How can I fix both of these problems?
I have searched forums and google and nothing has come up.
Click to expand...
Click to collapse
ok,for error (300)you can use the RUU MUNS already posted in the 'HardSPL' thread,download the RUU_MUNS application extract it to a folder and copy and paste all the files of this extracted to the folder of the Rom replacing all the RUU files in that folder or copy the nk.nbf folder in the Rom to the extracted folder of the RUU_MUNS and then run the RUU,it will start to flash and complete and hopefully fully boot up.
For edge or gprs,you'll have to get network settings of your network carrier or check out the thread from where you downloaded the rom,its uaually posted there or check out the 'Network' thread.
Aquestion to Zabardast_1 ?
294 error , invalid vender ID
what does that means & asolution to it during rom update
ERROR [294] : INVALID VENDER ID
One of these error messages will appear when you use the wrong RUU to do the upgrade. RUU will check if the Model ID and Language ID are compatible with the device. Make sure you use the appropriate RUU tool to upgrade.
hello there
i am stuck in tricolor bootloader mode ipl 1.04 spl 2.03. the thing is i didn't flash my device when this is happening. it happened when i changed the sim card.when i turned it on the tricolor bootloader appear..i never have problems with my device b4..i hv tried the fix mentioned here by using mtty still to no avail..also i tried to flash my device (1st time ever) to the official rom..it did get to 100% and succeful but when it reset the bootloader reappear..any idea??
i never flash my device b4..the one that i mentioned is done after this problem appear so the question of hardspl do not arise..
please help..hoho
Someone please delete this thread
Someone please delete this thread
Use the SEARCH! There are 100+ people with this problem
Aww, come on guys. I think its funny.
guys be kind and take life easy, help the need, and dont dissapoint him, ONE DAY YOU WILL HAVE THE SAME PROBLEM!!!
hi,
i am facing the same problem that u have faced before "my herm is in tricolor bootloader mode with spl 2.03 and ipl1.04" have u got any any solution for that...?
please do share and help mee.. i am waiting for your reply.
thanks