Error 260..when doing a radio only upgrade - 8525, TyTN, MDA Vario II, JasJam Software Upgradin

I am trying to do a radio only upgrade using the trinity 1.27 rom on my hermes 100. I have followed all the steps to the letter and have got to the point of modifying the nbhgen.txt file completed. On running the upgrade It is fine up to the updating of the rom @ 0%. I am confronted with an "Error 260". The txt file that came with this rom suggested a computer and pda reboot. which i have done several times. (still unsuccesful ).
Any help would be greatfully appreciated and thanks in advance.

Related

Downgrade back to stock

Ok. having too many issues to keep running DCD 2.2.0 alltel version.
I want to go back to the stock Alltel rom, but it fails at about 2% into it.
I've tried the relocker but it still fails when I try to install..
How to I install the Stock Alltel Rom?
Help!
Thanks
Brad
everytime i attempt to reload the stock rom I get this error
PDA Phone ROM Update Utility 3.16.4.2
ERROR [328]: Invalid Command
This update utility cannot be used for your PDA Phone. Please check your Update Utility
So anyhelp would be greatly appreciated..
Did you use the relocker before attempting to flash?

relocking issues and specifics.. solved

I am relocking my phone from DCD 3.2.6 because I need to have Sprint repair a broken Talk, End and Voice button, in addition to a broken SD card reader. Yeah, my phone is eff'd.
Ran into problems when reflashing the stock Sprint ROM. I was reading the wiki and used the RUU that came with the stock 3.56 ROM RAR file. Unfortunately, it kept giving me an "incorrect image" error. Finally, I figured out that I had to use the specific RUU that I need to download by itself, which the wiki didn't have a link to on that particular stock ROM page (found the RUU file on the WM6.1 wiki page) and actually copy the stock xxxxxxxxx.nbh file into that RUU directory.
During the reflashing, it was going good until I opened and closed some folders on my laptop and it made the reflashing hang at 59%. Apparently, it actually is picky about NOT touching your computer during the reflashing process. I had to restart the reflashing process and it worked the second time. Whew!

big trouble flashing

Hi guys, i have little/big problem. I have bricked hermes, SPL 2.03, before with no radio message... when i try to flash some rom, it stucks and restart at 1%, when i try sd card flash, i get red 00062008 error, or 00028002 error. when i was trying official shipped rom, it seems good, until it was flashing radio part, then it stucks... so.. is possible to help? and, is possible to find some shipped rom without radio? KITL is not supported by the phone now... any solution please? even it i can use it as a pda only... thanks very much for quick replies
Do a search on here for a program called Rom Koch. You can pull the radio out of your stock rom. Then reflash and use as a PDA.
Cheers...
Yes, i tried it before, but without success, because if i modify original rom this way, herm doesn't recognize it as a stock rom, but as a cooked rom (even if i set the same cid as stock rom), and i get red error again... this does't work..

HD2 Bricked!-Upgrade Rom Code Error - not able to get out. PLEASE HELP!

Hello all!
I am in desperate need of some help from you all, and the great rom chefs here.
What exactly happened:
From past 2-3 roms (pandora 1.0, 1.1, PDAVIET-v6,v7) i have been having regular MANILA freezes. it would freeze within 12 hours of flashing, and in the last 2 flashes, it froze within 1 hour, without me installing anything.
Titanium worked fine. untill that started hanging too.
So i tried reflashing the 1.6 official rom, thinking that might clear up some bugs as its the official rom.
while trying to flash it (from my sd card directly) it gave up an error - Invalid DEVICE.
I restarted and went into bootloader again, and then i started getting this error :
UPGRADE ROM CODE ERROR
PLEASE TRY AGAIN
Now i have tried reflashing from the computer, and also from the sd card directly, 1.6 official , pandora 1.1, pdaviet v7, but to no success.
All the time it still gets stuck on that screen.
I have tried hspl'ing it again, it was successful - the hspl procedure, but then still no rom loads onto it.
Even tried using the sspl, but still nothing happens. With SSPL, it shows flashing as 0%, and stays there forever!
PLEASE HELP guys!
in a real bad situation!
Thanks!
so what is the device status currently?
can u boot into a main manilla or titanium screen?
Can you get to bootloader? Were you flahsing ROMs using SSPL or HSPL?
hi..
i dont know if this might work, try to get stock rom, xxx.exe, rename xxx.exe to xxx.rar and unpack it. you should see RUU_signed.nbh and rename to leoimg.nbh. put leoimg.nbh in the root of your sd card. and flash use vol down+power button.
oh, there was a mistake!
When you firstly flashed your device with 1.6 official from sd card, this removed hspl and the device checked your rom's region id. I guess you have used offical roms from other areas. So the process stopped when the device checked the cid.
At this stage, you should find out the offical rom from your area, and re-flash it from sd card, then everything will be fine.
But you didn't, you tried re-hspl and sspl...and i don't know what the consequence will be.
So? Did you get it fixed mate?
Any update? if you haven't fixed it yet PM me.
If it is de wrong region rom you tried to flash do you might need to flash it with a goldcard?
hope you got it sorted
Just flash your original rom using htc ruu will do. been there, done that
yeah flash the 142 or 148 rom that is appropriate for your device.. and use teh exe/ruu that came with it rather than sdcard.
what's the betting you needed the goldcard to flash 161? which is why you're having issues trying to reflash it ?
HSPL
Hi,
You could try this,
1) flash HSPL first.
2) flash the stockrom one more time from storage card.
This will erase hardspl so if you want to flash custom roms again you need to flash HSPL one more time after you flashed the stockrom.
Succes,
Leo
I have the same problem and I need the official 1.42 rom... do u know where I can find it?
_JuSteR_ said:
I have the same problem and I need the official 1.42 rom... do u know where I can find it?
Click to expand...
Click to collapse
Link from Dutty:
http://rapidshare.com/users/258XUJ
Your Leo was probably locked on your operator
at this point You've got to flash HTC official ROM with a Golcard.
Or your operator's rom directly from bootloader.
yep. I'm actually trying to get a gold card...
I've tried to create a gold card and hard reset but the setup fail
00018003
LEOIMG.nbh - FAIL
RADIO_V2 - RSA FAIL
rcust -
bootloader -
splash1 -
os -
configdata -
Update terminate
Update FAIL
Click to expand...
Click to collapse
maybe is the gold card wrong?
_JuSteR_ said:
I've tried to create a gold card and hard reset but the setup fail
maybe is the gold card wrong?
Click to expand...
Click to collapse
Did you try flashing thru boatloader official Rom (from your region) ?
I tried to install the latest HTC official rom but the setup stops at 9%
"Error [290]: invalid command"
It seems a problem of Radio... not rom...
_JuSteR_ said:
I tried to install the latest HTC official rom but the setup stops at 9%
"Error [290]: invalid command"
It seems a problem of Radio... not rom...
Click to expand...
Click to collapse
You have to flash 1.43 of your Region thru boatloader. If boatloader does not work thru goldcard.
I tried with italian 1.43 official rom also but the setup keeps stopping... Tried also using a goldcard, created using qmat

[Q] Please help with radio problem

let me start off by saying i'm not a noob, maybe a semi-noob
my phone is def hard SPL
i know for a fact that my phone has a radio problem
i can successfully flash roms, not official ones
if i try and flash a stock one, it will flash the rom and when it starts on the radio, it fails
i also tried a complete rom like laurentius, it flashes then it will fail during the radio update
custom roms that do not include a radio update will successfully flash
i've tried both methods, micro usb and active sync
no luck.... laurentius fails at 15%. official roms fail at 8% or just stall and i get error 290...
i did a lot of researching and 2 other people here have had the same problem.
one ended up selling his... and i don't think the other has found a solution
read something about gold card? no clue what that is
please help!
thanks in advance
First! Happy new Year ! and Secound kk "We have a same problem!".. sometimes when I leave without battery for some hours i can install the Asian version "stock ROM" and use the cellphone but 20 or 30 minutos after it stops working and when i reset my cellphone it stop on the HTC logo. I search for a month and nothing too! I'm waiting for help too my friend !
lilguy227 said:
let me start off by saying i'm not a noob, maybe a semi-noob
my phone is def hard SPL
i know for a fact that my phone has a radio problem
i can successfully flash roms, not official ones
if i try and flash a stock one, it will flash the rom and when it starts on the radio, it fails
i also tried a complete rom like laurentius, it flashes then it will fail during the radio update
custom roms that do not include a radio update will successfully flash
i've tried both methods, micro usb and active sync
no luck.... laurentius fails at 15%. official roms fail at 8% or just stall and i get error 290...
i did a lot of researching and 2 other people here have had the same problem.
one ended up selling his... and i don't think the other has found a solution
read something about gold card? no clue what that is
please help!
thanks in advance
Click to expand...
Click to collapse
What HSPL, ROM and RADIO have you on your phone now?
Have you tried to flash a RADIO itself?
Flash a radio... noob...
Sent from my HTC HD2 using XDA App
ok .. but what radio can i flash on the asian Leo HT1 ???
While asking for help please mention current Radio, ROM, OS versions on the phone. Would be easier to help.

Categories

Resources