Hi guys, i have little/big problem. I have bricked hermes, SPL 2.03, before with no radio message... when i try to flash some rom, it stucks and restart at 1%, when i try sd card flash, i get red 00062008 error, or 00028002 error. when i was trying official shipped rom, it seems good, until it was flashing radio part, then it stucks... so.. is possible to help? and, is possible to find some shipped rom without radio? KITL is not supported by the phone now... any solution please? even it i can use it as a pda only... thanks very much for quick replies
Do a search on here for a program called Rom Koch. You can pull the radio out of your stock rom. Then reflash and use as a PDA.
Cheers...
Yes, i tried it before, but without success, because if i modify original rom this way, herm doesn't recognize it as a stock rom, but as a cooked rom (even if i set the same cid as stock rom), and i get red error again... this does't work..
Related
Got Qtek WIZA200 IPL/SPL 2.17, with french rom. After hard reset, while costumised the phone give me an error: "/Windows/Autoconfig.exe does not exist" , and then costumisation procces stops, without any changes on phone(with all memories and stuff).
Tried to flash other rom, flashing done secceful, phone stayed on french and still stocked on this error while hardreset.
Please help me with some advice, what can I do?
tnx in advance B.R.
You need to HardSPL/SoftSPL for flashing to another ROM.
starkwong said:
You need to HardSPL/SoftSPL for flashing to another ROM.
Click to expand...
Click to collapse
OK, tnx, but will new rom resolve my problem? And is it matter wich SPL(hard,soft) to do?
Get a ROM that doesn't include Extension ROM, then the problem will be gone (because the ROM will not call AutoConfig)
I have the same autoconfig problem, can't cid unlock for some reason. Give some names of wm6 roms without ext roms and I will try it.
hi all,
this morning i flash a new rom from xda,and my herm100 not showing up the radio and protocol version on my pda,and sumore my pda call and hold call button no funtion all all,even i try to run the phone at program but since like nth show up?izzit problem on radion and protocol ?
Did you flash HardSPL on your device? If not, do it. Then, flash a radio ROM. That should fix the radio issue. If you're having more problems after that, try flashing an official ROM.
You vam also try to flash the stock rom but if the radio doesn't come back you have a permanent brick on your hands. Its best to flash your radio with the sd card method as it is safer than with the usb cable. ANY interruption flashing your radio rom will probably end with a brick...
Cheers...
zz
hi,
yes i did....i flash the hardSPL too but still the same,i try to flash the original rom back it was hanging at 11%,but some time hand in 18%
oh ya,where can i look for the SD flash radio rom,can give me the url -_- i really need hlp from u guy,now my pda is died,can't make a call.....T_T
The wiki is your friend: http://wiki.xda-developers.com/index.php?pagename=Hermes_SDCardFlashing
zz
now i make the flash in sd memory card wif fat32, T_T it hang when upgrade GSM,still got another way??even i just upgrade the radio and flash by cd card,also hanging on GSM [like can't overwrite the radio]..T_T need hlp T_T
need a
Have you looked through this page? http://wiki.xda-developers.com/index.php?pagename=Hermes_UpgradeProblems
I don't think you are gonna recover the radio (phone) part of your os. Its a permanent brick. However, you can flash an OS only rom and use it as a PDA.
Once the radio rom is corrupted, the only thing you can do is use your Hermes as a PDA and go get a new phone. Sorry...
zz
GRRR.....no more way to recover this radio version ? T_T
how bout got any idea CLEAR all the radio [none radio in pda phope] ,after that i just installl the new radio X.x''
Phone functions gone forever, you can still use as a PDA if you flash with an OS only rom - any cooked rom should do. You'll find them in the WM06 part of the forum.
Sorry to be the bearer of bad news but at least its not a total loss.
zz
T_T...then i hv choice to give up my phone but thx u[ultramag69] anyway for hlping me
I've been having a few odd problems trying to get my C550 to flash a ROM of any kind using MTTY or Tera Term. I had been planning to reflash an old QTek ROM that I had on there, with one of the newer WM6.x ROMs that you guys have managed to put together. To recap, my C550 already has SuperCID, the SPL has been reflashed using Patched RUU and now reports 1.0.77 rather than the 1.0.16 or my other stock C550.
I can enter the bootloader fine and can connect to it using Mtty, making it respond to successfully to info and format commands, but when I try writing a new ROM, it just sits there doing nothing. I know it takes a while to reflash, but on my device it doesn't actually do anything even if you leave it for a couple of hours. The log looks as follows:
Cmd>l c:\rom.bin
clean up the image temp buffer at 0x8C080000 Length 0x01C40000
MTTYDownloadImage "c:\rom.bin"
:F=c:\rom.bin
start download​
The phone itself can be successfully reflashed using a ROM install package such as that of the old QTek ROM, or another T-Mobile ROM I have. The device can also be made to dump the current ROM to the miniSD card, so the bootloader seems to be functional. Which makes me wonder why this isn't working? I've tried flashing with and without the sim card, and also with and without an sd card in the handset, but it doesn't seem to make any difference.
If anybody has any suggestions of something else I could try, I'd greatly appreciate it! I had been thinking of trying to find an image dump of a WM6 ROM that I could then restore from miniSD, so if anybody would be able to that, it would also be appreciated.
Thanks for your help!
chilano
Please ignore the post above, I realised the SPL upgrade didn't seem to take until I used a different download of spl566wm6_spfans2006.nbf. Everything works fine now anyway.
Cheers for the wonderful work guys
Hello all!
I am in desperate need of some help from you all, and the great rom chefs here.
What exactly happened:
From past 2-3 roms (pandora 1.0, 1.1, PDAVIET-v6,v7) i have been having regular MANILA freezes. it would freeze within 12 hours of flashing, and in the last 2 flashes, it froze within 1 hour, without me installing anything.
Titanium worked fine. untill that started hanging too.
So i tried reflashing the 1.6 official rom, thinking that might clear up some bugs as its the official rom.
while trying to flash it (from my sd card directly) it gave up an error - Invalid DEVICE.
I restarted and went into bootloader again, and then i started getting this error :
UPGRADE ROM CODE ERROR
PLEASE TRY AGAIN
Now i have tried reflashing from the computer, and also from the sd card directly, 1.6 official , pandora 1.1, pdaviet v7, but to no success.
All the time it still gets stuck on that screen.
I have tried hspl'ing it again, it was successful - the hspl procedure, but then still no rom loads onto it.
Even tried using the sspl, but still nothing happens. With SSPL, it shows flashing as 0%, and stays there forever!
PLEASE HELP guys!
in a real bad situation!
Thanks!
so what is the device status currently?
can u boot into a main manilla or titanium screen?
Can you get to bootloader? Were you flahsing ROMs using SSPL or HSPL?
hi..
i dont know if this might work, try to get stock rom, xxx.exe, rename xxx.exe to xxx.rar and unpack it. you should see RUU_signed.nbh and rename to leoimg.nbh. put leoimg.nbh in the root of your sd card. and flash use vol down+power button.
oh, there was a mistake!
When you firstly flashed your device with 1.6 official from sd card, this removed hspl and the device checked your rom's region id. I guess you have used offical roms from other areas. So the process stopped when the device checked the cid.
At this stage, you should find out the offical rom from your area, and re-flash it from sd card, then everything will be fine.
But you didn't, you tried re-hspl and sspl...and i don't know what the consequence will be.
So? Did you get it fixed mate?
Any update? if you haven't fixed it yet PM me.
If it is de wrong region rom you tried to flash do you might need to flash it with a goldcard?
hope you got it sorted
Just flash your original rom using htc ruu will do. been there, done that
yeah flash the 142 or 148 rom that is appropriate for your device.. and use teh exe/ruu that came with it rather than sdcard.
what's the betting you needed the goldcard to flash 161? which is why you're having issues trying to reflash it ?
HSPL
Hi,
You could try this,
1) flash HSPL first.
2) flash the stockrom one more time from storage card.
This will erase hardspl so if you want to flash custom roms again you need to flash HSPL one more time after you flashed the stockrom.
Succes,
Leo
I have the same problem and I need the official 1.42 rom... do u know where I can find it?
_JuSteR_ said:
I have the same problem and I need the official 1.42 rom... do u know where I can find it?
Click to expand...
Click to collapse
Link from Dutty:
http://rapidshare.com/users/258XUJ
Your Leo was probably locked on your operator
at this point You've got to flash HTC official ROM with a Golcard.
Or your operator's rom directly from bootloader.
yep. I'm actually trying to get a gold card...
I've tried to create a gold card and hard reset but the setup fail
00018003
LEOIMG.nbh - FAIL
RADIO_V2 - RSA FAIL
rcust -
bootloader -
splash1 -
os -
configdata -
Update terminate
Update FAIL
Click to expand...
Click to collapse
maybe is the gold card wrong?
_JuSteR_ said:
I've tried to create a gold card and hard reset but the setup fail
maybe is the gold card wrong?
Click to expand...
Click to collapse
Did you try flashing thru boatloader official Rom (from your region) ?
I tried to install the latest HTC official rom but the setup stops at 9%
"Error [290]: invalid command"
It seems a problem of Radio... not rom...
_JuSteR_ said:
I tried to install the latest HTC official rom but the setup stops at 9%
"Error [290]: invalid command"
It seems a problem of Radio... not rom...
Click to expand...
Click to collapse
You have to flash 1.43 of your Region thru boatloader. If boatloader does not work thru goldcard.
I tried with italian 1.43 official rom also but the setup keeps stopping... Tried also using a goldcard, created using qmat
Hi, im getting very annoyed with my phone, probably something to do with i don't know what the hell im doing. Basically my phone has lately started to go crazy and constantly reboots, only getting to the orange windows screen. and very rarely boots up. I have the o2 HD2. Ive tried hard reseting..and taking out cards and booting but nothing seems to help. So i spotted the new generic 3.14 rom on the official htc website and downloaded it and thought it would fix it all. But now it wont work, it gets to %100 on the ROM update utility and says '' ERROR 270:UPDATE ERROR - The image file is corrupted, Please check your update utility. Ive downloaded it twice now as it told me as it was corrupt, to download and try again, but its doing the same. Now my hd2 is stuck on the multi colored screen and will NOT boot. Someone please help me, and try to have patience with me as im un-familiar with all this . Someone taking the time to help me would be VERY appreciated. Thanks.
theres a real o2 3.14 rom HERE
http://www.htc.com/uk/supportdownloadlist.aspx?p_id=297&act=sd&cat=all
or you need hspl
Hey Brandon911 after you manage to flash the ROM member samsamuel was kind enough to link for you. If you don't know how to flash the ROM simple put your HD2 in bootloader(tricolor screen) and run the RUU or exe wich ever one it has once you exsrtact/unzip the zipfile. Make sure it says USB in the white bar of bootloader though before you run the updat utility.Anyway once you flash the ROM check your pins that connect to the battery cause I am willing to bet you have been dueing a lot of battery pulls and might have inadvertantly bent one of your pins. I say this cause you said your HD2 was "constantly rebooting".
i cant flash that rom at all? i try to extract it to my pc and it says its currupt :s ive downloaded it twice now. should i use a different rom? a custom one? And thankyou macgnolia
Brandon911 said:
i cant flash that rom at all? i try to extract it to my pc and it says its currupt :s ive downloaded it twice now. should i use a different rom? a custom one? And thankyou macgnolia
Click to expand...
Click to collapse
I don't see no real reason you should not try a custom ROM. Just make sure and tbis is very important, if the custom ROM has a radio that comes with it, that the radio is compatible with your o2 HD2. I am also sure when samsamuel gets to read this thread again he will be abale to offer more help, probably better than I.
Edit: You will have to have HSPL flashed to your HD2 to flash a custom ROM.
im sticking with the generic 3.14 from the htc website. my phone is on SPL 3.03? and to run hspl u can only go up to 2. something so it wont run? sorry guys, your patience is much appreicated. i just need some step by steps on what i should do, in order, for a noob.
hspl4, supports 3.03. If you want to use magldr you will need to go to 2.08.hspl
Brandon911 said:
im sticking with the generic 3.14 from the htc website. my phone is on SPL 3.03? and to run hspl u can only go up to 2. something so it wont run? sorry guys, your patience is much appreicated. i just need some step by steps on what i should do, in order, for a noob.
Click to expand...
Click to collapse
Did you use HSPL 3 OR HSPL 4You should use HSPL 4.