hi all,
this morning i flash a new rom from xda,and my herm100 not showing up the radio and protocol version on my pda,and sumore my pda call and hold call button no funtion all all,even i try to run the phone at program but since like nth show up?izzit problem on radion and protocol ?
Did you flash HardSPL on your device? If not, do it. Then, flash a radio ROM. That should fix the radio issue. If you're having more problems after that, try flashing an official ROM.
You vam also try to flash the stock rom but if the radio doesn't come back you have a permanent brick on your hands. Its best to flash your radio with the sd card method as it is safer than with the usb cable. ANY interruption flashing your radio rom will probably end with a brick...
Cheers...
zz
hi,
yes i did....i flash the hardSPL too but still the same,i try to flash the original rom back it was hanging at 11%,but some time hand in 18%
oh ya,where can i look for the SD flash radio rom,can give me the url -_- i really need hlp from u guy,now my pda is died,can't make a call.....T_T
The wiki is your friend: http://wiki.xda-developers.com/index.php?pagename=Hermes_SDCardFlashing
zz
now i make the flash in sd memory card wif fat32, T_T it hang when upgrade GSM,still got another way??even i just upgrade the radio and flash by cd card,also hanging on GSM [like can't overwrite the radio]..T_T need hlp T_T
need a
Have you looked through this page? http://wiki.xda-developers.com/index.php?pagename=Hermes_UpgradeProblems
I don't think you are gonna recover the radio (phone) part of your os. Its a permanent brick. However, you can flash an OS only rom and use it as a PDA.
Once the radio rom is corrupted, the only thing you can do is use your Hermes as a PDA and go get a new phone. Sorry...
zz
GRRR.....no more way to recover this radio version ? T_T
how bout got any idea CLEAR all the radio [none radio in pda phope] ,after that i just installl the new radio X.x''
Phone functions gone forever, you can still use as a PDA if you flash with an OS only rom - any cooked rom should do. You'll find them in the WM06 part of the forum.
Sorry to be the bearer of bad news but at least its not a total loss.
zz
T_T...then i hv choice to give up my phone but thx u[ultramag69] anyway for hlping me
Related
Rom Ver: 3.54.708.2
Rom date: 07/05/07
Radio : 1.46.00.10
With this radio ver. (1.46) i can't use my wifi, it always disconnet (when it found any wireless network)no matter what Wireless router(Linksys, Belkin, etc) you are using!!!
Please Help!
techmonk said:
Rom Ver: 3.54.708.2
Rom date: 07/05/07
Radio : 1.46.00.10
With this radio ver. (1.46) i can't use my wifi, it always disconnet (when it found any wireless network)no matter what Wireless router(Linksys, Belkin, etc) you are using!!!
Please Help!
Click to expand...
Click to collapse
I am not sure your problem is due to the radio rom. And... yes you can upgrade your radio rom. I encourage you to search and read on the subject before doing it. If it is the first time you flash your hermes, you have to know that it is not difficult but requires some care. At least you have to know that upgrading the radio rom is a bit more sensitive than other parts of the rom (OS for example) You are the only responsible if it fails. The risk exists that you brick your phone.
That said, a lot of users are flashing their hermes more than once a day . Personnally i use the SDcard method which is very easy. I do not remember how many times i flashed my Tytn...
Start to look at guides here : http://forum.xda-developers.com/showthread.php?t=299462 (the method is the same for all radio roms)
There is a way to limit the risk of bricking the phone here : http://www.mrvanx.org/cms/index.php?option=com_content&task=view&id=30&Itemid=27
Good luck
Bergerac56 said:
I am not sure your problem is due to the radio rom. And... yes you can upgrade your radio rom. I encourage you to search and read on the subject before doing it. If it is the first time you flash your hermes, you have to know that it is not difficult but requires some care. At least you have to know that upgrading the radio rom is a bit more sensitive than other parts of the rom (OS for example) You are the only responsible if it fails. The risk exists that you brick your phone.
That said, a lot of users are flashing their hermes more than once a day . Personnally i use the SDcard method which is very easy. I do not remember how many times i flashed my Tytn...
Start to look at guides here : http://forum.xda-developers.com/showthread.php?t=299462 (the method is the same for all radio roms)
There is a way to limit the risk of bricking the phone here : http://www.mrvanx.org/cms/index.php?option=com_content&task=view&id=30&Itemid=27
Good luck
Click to expand...
Click to collapse
Still cannot upgrade it, i have tried several times, it still remains in 1.46
techmonk said:
Still cannot upgrade it, i have tried several times, it still remains in 1.46
Click to expand...
Click to collapse
1> Did you install the HARDSPL version 7?
2> If this is done, copy the "RUU_signed.nbh" file of the radio rom on a sd card just formated (fat32) and rename the file HERMIMG.nbh. It has to be the only file on the card if you want to be sure that it works.
3> Fully charge the TYTN.
4> Insert the card and start the SPL process (OK / POWER and soft reset). You will get the 3 colors screen directly followed by another one showing what you have to do to upgrade the radio rom
Be aware that the radio rom upgrade is slow. It gives the impression that it could stop. Just be patient.
And... once again, you are the only responsible if it bricks your phone
Bergerac56 said:
1> Did you install the HARDSPL version 7?
2> If this is done, copy the "RUU_signed.nbh" file of the radio rom on a sd card just formated (fat32) and rename the file HERMIMG.nbh. It has to be the only file on the card if you want to be sure that it works.
3> Fully charge the TYTN.
4> Insert the card and start the SPL process (OK / POWER and soft reset). You will get the 3 colors screen directly followed by another one showing what you have to do to upgrade the radio rom
Be aware that the radio rom upgrade is slow. It gives the impression that it could stop. Just be patient.
And... once again, you are the only responsible if it bricks your phone
Click to expand...
Click to collapse
1> Yes, i have installed it, and it told me that i can now SuperCID and unlock SIM
2> Yes, but i tried it by using USB connection(once after the HARDSPL process) and update it through WINXP and by the way RUU_signed.nbh is version 1.54.00.10
3> Yes, it is fully charged
4> Yes, i get the 3 colour screen while flashing (through USB), and the whole process took me about 25 mins, but once after that it will restart by itself and the radio version still appear to be 1.46.00.10
techmonk said:
1> Yes, i have installed it, and it told me that i can now SuperCID and unlock SIM
2> Yes, but i tried it by using USB connection(once after the HARDSPL process) and update it through WINXP and by the way RUU_signed.nbh is version 1.54.00.10
3> Yes, it is fully charged
4> Yes, i get the 3 colour screen while flashing (through USB), and the whole process took me about 25 mins, but once after that it will restart by itself and the radio version still appear to be 1.46.00.10
Click to expand...
Click to collapse
Mmmm... If i understand what you say, the process was completed successfully.
A stupid question... are you sure that the ".nbh" file is well the good version?
I am still a newbie. I just got my phone fixed by Softbank (they said the manufacture fixed it by changing its mainboard). I got same radio, 1.46.00.10. My old mainboard's radio was 1.41.00.01, and it stuck at the same radio whatever I did to upgrade it. I think it's because Softbank put something to prevent us from upgrading the radio. Well, I am not sure though. I'll explore this more. I hope I won't get any problem with this radio
mjbudhiyahoo said:
I am still a newbie. I just got my phone fixed by Softbank (they said the manufacture fixed it by changing its mainboard). I got same radio, 1.46.00.10. My old mainboard's radio was 1.41.00.01, and it stuck at the same radio whatever I did to upgrade it. I think it's because Softbank put something to prevent us from upgrading the radio. Well, I am not sure though. I'll explore this more. I hope I won't get any problem with this radio
Click to expand...
Click to collapse
Yes that could be but it would the first time i hear that. Mine is a TYTN herm200 and i do not have any problem flashing it
Hope you will find a way...
mjbudhiyahoo said:
I am still a newbie. I just got my phone fixed by Softbank (they said the manufacture fixed it by changing its mainboard). I got same radio, 1.46.00.10. My old mainboard's radio was 1.41.00.01, and it stuck at the same radio whatever I did to upgrade it. I think it's because Softbank put something to prevent us from upgrading the radio. Well, I am not sure though. I'll explore this more. I hope I won't get any problem with this radio
Click to expand...
Click to collapse
Is the Wifi function working well, cause i always cannot connecting it to my router with this radio rom 1.46.00.10
help me
I have a problem with my TyTN
I do not gsm network, this after an upgrade how can I fix this?
flash radio
read the forum and flash the radio
I read on the forum and I found how to do, but I can not.
as I do with mtty to have prompted usb>?
Try this... http://forum.xda-developers.com/showthread.php?t=294523
U must use Custom RUU Update tool and Radio ROM file.
It does not work I will lock the bootloader I do not know what to do are desperate
help me plese
help me no gsm tytn
The only other thing you can try is to flash the shipped stock rom. If you STILL get "No GSM" then you have a permanent brick on your hands. Make sure to flash Hard SPL then you can try an OS only rom and use as a PDA but you won't be able to use the phone functions anymore.
Cheers...
Is there NO way to repair/reflash a bad upgrade?
I'm stuck on 11% during flash.
I'm using HardSPL 2.7
Thanks
I can not prompt the usb be how can I do?
when I hit twice is always sending cmd
There is no way to repair the radio rom. There have been cases where people have reflashed the Shipped stock rom and its worked but most people don't have any love. To be honest, once the radio rom is gone, you have NOTHING to loose by trying anything to get it back.
Good luck...
there is a way to "unbrick" the tytn, the sollution is to install the original os provided by cell operator by using one of these methods http://wiki.xda-developers.com/index.php?pagename=Hermes_UpgradeProblems#problem4 , if there is still a problem look at wiki.xda-developers.com
...
ps. i had the same problem and now the tytn is still working from 2 mount ago
ps. i use the vodafone_v1605 ... bla-bla-bla soft and it's seems to be good
As I said, there have been some successes, but these are in the minority. Most people don't have success. If you don't believe this lordextra, check out the other posts. Most of the time the information you gave is given. In fact if you re-read my post I mentioned this. You must have been one of the lucky few....
Cheers...
Hi guys, i have little/big problem. I have bricked hermes, SPL 2.03, before with no radio message... when i try to flash some rom, it stucks and restart at 1%, when i try sd card flash, i get red 00062008 error, or 00028002 error. when i was trying official shipped rom, it seems good, until it was flashing radio part, then it stucks... so.. is possible to help? and, is possible to find some shipped rom without radio? KITL is not supported by the phone now... any solution please? even it i can use it as a pda only... thanks very much for quick replies
Do a search on here for a program called Rom Koch. You can pull the radio out of your stock rom. Then reflash and use as a PDA.
Cheers...
Yes, i tried it before, but without success, because if i modify original rom this way, herm doesn't recognize it as a stock rom, but as a cooked rom (even if i set the same cid as stock rom), and i get red error again... this does't work..
Hi everybody,
Well yesterday i figured out that i could update my rom.
I started to look the Arthemis thread to find out what's new.
I saw SSPL and the 3.14 rom.
I downloaded the 3.14 rom and i installed it.After that i took the SSPL and the Arthemis V42 Rom and tried to install it. No success.
After that i took the energy rom to install it and it works but i still have the 3.14 rom display instead of the energy rom.
So right now i'm a little bit stuck cause i don't know what to do
Here's my specs:
SPL-2.08.HSPL 8G XE
Systeme version : 5.2.21684 (21684.5.3.10)
Manila version : 2.5.20191914.0
Rom version: 09 November 2010 FRE
Radio Version: 2.12.50.02_2
Protocol Version : 15.40.50.07U
So i'm asking you guys a little help please to put energy or new arthemis back in my phone.
Thanks for your help
Ps: ( I need help on how to put my phone back to normal i'm a little confused about SSPL and the 3.14 rom :s )
run Task29
! Read Edit 2 down below first !
Well, you could try to run Task29. That will purge your ROM and leaves it nice and perfectly clean for another ROM without the risk of residua in the memory.
You can find it here:
http://forum.xda-developers.com/showpost.php?p=5848003&postcount=19
You will need to install a radio ROM after that, too. But having the memory wiped clean this way between installs is a good way to avoid trouble.
ThoroSOE
Edit 1: To reset your phone to normal (SPL, too) just download an original ROM and unpack the file with something like 7zip. Take the largest file (easy to spot) and rename it to LEOIMG.nbh. Copy that to your freshly formattet memory card and bring up your phone to the bootloader screen (power up with volume down pressed). It will then prompt to install the original ROM. This will overwrite HSPL and any ROM and Radio ROM you installed.
Edit 2: It could be that with ROM 3.14 the SPL is too new for HSPL! Mind that it just supports specific SPL versions! Check that! I think 3.14 has an 3.XX SPL version.
Before I could install HSPL properly I had to downgrade my ROM with an older original one to get the proper SPL (see Edit 1).
Thanks i try it now ill let you know.
Sir you don't need to look fare for your problem.
The problem is that stock ROM 3.14 isn't compatible with HSPL!!
And about Artemis ROM; I suggest you to take your time and read the "How to install?" At the Artemis ROM.
If you did it; you was ale to see you need to remove HSPL before install stock ROM 3.14!
thanks kurt-willems for answering me.
Can you tell me hat i need to do step by step please ?
I will really appreciate.
Thanks for help guys.
OcmyHtc said:
thanks kurt-willems for answering me.
Can you tell me hat i need to do step by step please ?
I will really appreciate.
Thanks for help guys.
Click to expand...
Click to collapse
Sir I don't see how I can write a better step by step guide on how to do it.
I will suggest you to read these post's.
If you have a unbranded device:
http://forum.xda-developers.com/showpost.php?p=8776196&postcount=26465
Ore this in case you have a branded device:
http://forum.xda-developers.com/showpost.php?p=8945325&postcount=28077
PS; if you have random questions, follow the link at my signature "Q&A: How? Where? what? Ideas? [New Users?]"
And if your have other questions, just ask. but it is important to read and follow the institutions.
Thanks again kurt-willems for your answer.
So after reading the entire post on how to flash arthemis rom i did all the steps but i am stuck at the step 7
7. Run SSPL_RUU.exe with Artemis v40 RUU_Signed_0409.nbh in the same folder - YOU HAVE TO BE ON HOME SCREEN, NOT BOOTLOADER (this took me 3 tries until succeded - yes - nerve wrecking, but works). If it doesn't work (hangs on black screen for more than 2min or stays at 0%) remove the battery and try again. If still doesn't work - try solutions in NOTE below.
I did all as it is explained in the thread my SSPL is good etc but when i launch SSPL + arthemis nbh, i got into the bootloader.
I tried like 5 times and i start to be angry.
So if you can help me it would be great.
Thanks
Ok i dont have nerves to do it again, can you guys just simply explain me how to uninstall SPL 3.03 and just install HSPL 2 and put a simple rom cause right now my phone don't work because of that.
Thanks you guys for reading me.
If you will install Artemis ROM I suggest you to use v42.0!
I/we know that flashing over SSPL isn't alway's easy (it will not start alway's)
but some important things to know is to deactivate your Anti-Virus; and creating a file with only the rom.nbh and SSPL_RUU in it nothing els!
(PS; Artemis ROM v42.0 starts better than previous v41.0 (own experience))
But if you will return to previous settings;
Reinstall a previous stock ROM ex 1.66 ore 1.47 (depending of you're aria)
Reinstall HSPL use HSPL3_RUN.exe fore this.
Thank you kurt willems for your time.
So after reading a lot of things , i did everything but im still stuck at the installation of the arthemis rom.
I got a message in the phone saying: This program is trying to acces to your phone etccc... Bootloader.exe. And if i say YES then the program launch bootloader and the installation fails. If i say NO then the program stops.
I'm downloading right now the version 42 of arthemis and i will give it a try.
If its doesnt working then i'll rollback to my previous rom.
Thanks again for your time.
OcmyHtc said:
Thank you kurt willems for your time.
So after reading a lot of things , i did everything but im still stuck at the installation of the arthemis rom.
I got a message in the phone saying: This program is trying to acces to your phone etccc... Bootloader.exe. And if i say YES then the program launch bootloader and the installation fails. If i say NO then the program stops.
I'm downloading right now the version 42 of arthemis and i will give it a try.
If its doesnt working then i'll rollback to my previous rom.
Thanks again for your time.
Click to expand...
Click to collapse
I know this event sir, I have guide lot of users in this part. When you are on the bootlouder screen and at the bottom there is no mention of "usb" the installation will fail.
Its very important to be sure that your device is connect (control it in Active sync), Anti-Virus is turn off, the folder have only the rom.nbh and the SSPL_RUN (nothing more) in it, changing from USB port if you can.
And don't double click on SSPL_RUU fore run, but left click on it and select run ass administrator.
Lately I guide a other user on this and it have takes him 5 tray's
Ow, to be sure you have a good SSPL_RUU version takes mine: Download
Thanks but right now i just want one thing.. My phone to work.
I downloaded V42 and still the same problem.
I downloaded stock rom V1.93 from orange and i can't install it , don't ask me why.
So right now basically my phone is on the stock 3.14 rom and i don't know what to do to put an old rom and to flash to a energy rom with HSPL 3.
Seriously this all thing start to piss me off , no offence guys you making good stuff but sometimes its just to risky to flash.
I followed all the steps one by one and right now i got a useless phone in my hands.
I'm searching a way to get an old rom to be installed and desinstall SSPL.
If you can help me it would be great , im still searching.
You can flash a older stock ROM over SD.
Read my first post. There you can read how to reset to stock (Edit 1). Use an older stock ROM for a proper SPL that works with HSPL.
Install HSPL as instructed in the "how to flash everything" thread.
Run Task29 (see my first post)
Install Radio ROM with x.50.x in it from desktop via Active Sync (you need a Custom_RUU.nbh and the desired Radio ROM).
Install the main ROM you like, f.e. Energy ROM (that's what I use) normally from destop via Active Sync (Energy is one package that works like an official update).
Never had any problems with this way, never needed more than one try.
Hey ThoroSOE i rode Edit 1 and Edit 2.
I hope its not that much to ask but, could you give me a WWE rom like you said in Edit 1 to put it in the SD card ?
It would be really appreciated.
I'm downloading right now a official orange rom (1.66) but i tried installing the 1.43 and it didnt worked, thats why i'm asking you the question for a WWE rom to accomplish what u told me on Edit 1.
Thanks you guys for helping me.
Ok i'm trying this right now Edit 1: To reset your phone to normal (SPL, too) just download an original ROM and unpack the file with something like 7zip. Take the largest file (easy to spot) and rename it to LEOIMG.nbh
With the 1.66 official rom.
I will let you know.
Ok so i tried to do what u told me on edit 1.
I enter in bootloader and what i get is a nice :
Loading ...
Then
00028002
Not Allow
Can someone can tell me how to uninstall SSPL >?
Cause i really start to go crazy
OcmyHtc said:
Ok so i tried to do what u told me on edit 1.
I enter in bootloader and what i get is a nice :
Loading ...
Then
00028002
Not Allow
Can someone can tell me how to uninstall SSPL >?
Cause i really start to go crazy
Click to expand...
Click to collapse
SSPL isn't install on your device! so there is no need to remove it.
Did you tray to install stock ROM over SD!?
Witch are your errors you get?
Hmmm. Installing an official ROM from SD card shouldn't be a problem. If you have a branded device you should install an official ROM that matches your provider and area. For later purposes like installing HSPL it doesn't matter how old it is - as long as it is not too NEW ;-)
That way of installing a ROM (via SD card) ist kind of the brute way. As long as you use a ROM matching your provider and/or area it should overwrite ANYTHING in your phone memory...
When I unsintalled HSPL for the first time that way my HD2 aborted the update in midprocess but restarted updating automatically. After that it went through without problems; I didn't have to do anything.
I used the official 1.66 ROM from the HTC support page (unlocked device).
IMPORTANT: Did you name the ROM file for the SD card LEOIMG.nbh - in all capital letters? As I understand it, the bootloader is case sensitive. So it must be LEOIMG and not leoimg. Also did you format your SD card properly? It must be FAT 32, 4092K - and better not be done with quick formatting.
OcmyHtc said:
Ok so i tried to do what u told me on edit 1.
I enter in bootloader and what i get is a nice :
Loading ...
Then
00028002
Not Allow
Can someone can tell me how to uninstall SSPL >?
Cause i really start to go crazy
Click to expand...
Click to collapse
kurt-willems said:
SSPL isn't install on your device! so there is no need to remove it.
Did you tray to install stock ROM over SD!?
Witch are your errors you get?
Click to expand...
Click to collapse
As you can see in my post i already tried to install threw SD card.
When i enter in bootloader (vol down + boot the phone)
I have:
PB81100 HX BC
SPL- 3.03.0000 XE
So i have SSPL in my device.
ThoroSOE said:
Hmmm. Installing an official ROM from SD card shouldn't be a problem. If you have a branded device you should install an official ROM that matches your provider and area. For later purposes like installing HSPL it doesn't matter how old it is - as long as it is not too NEW ;-)
I have the orange operator in france.I took the version 1.66 put it into the sd card like you said.
When i pressed Vol down + boot to go into bootloader i get the error message:
00028002
Not Allow
That way of installing a ROM (via SD card) ist kind of the brute way. As long as you use a ROM matching your provider and/or area it should overwrite ANYTHING in your phone memory...
When I unsintalled HSPL for the first time that way my HD2 aborted the update in midprocess but restarted updating automatically. After that it went through without problems; I didn't have to do anything.
I used the official 1.66 ROM from the HTC support page (unlocked device).
IMPORTANT: Did you name the ROM file for the SD card LEOIMG.nbh - YES
in all capital letters? As I understand it, the bootloader is case sensitive. So it must be LEOIMG and not leoimg. Also did you format your SD card properly?
I format my SD card by the format option on the HTC leo.So i don't know if it's the good way to do it ?
It must be FAT 32, 4092K - and better not be done with quick formatting.
Click to expand...
Click to collapse
Please guys help me out i really don't know what do to anymore..
Hello there,
I bought my HTC HD2 two weeks ago, and when I received it, it had a ROM of a 3.14 Version with a Radio of 2.15.50
(RUU_Leo_S_HTC_GER_3.14.407.2_Radio_15.42.50.11U_2.15.50.14_LEO_S_Ship). The previous buyer told me he had Android Running on SD Card.
When I started "playing" with the phone, I got a lot of Screen Freezes during any app (Internet, Mail, Facebook). Not only did the screen frooze, but also did the no longer start up properly. Either it didnt hang during the Logo, or when entering the PIN. Even during Hardware resets it frooze sometimes.
As the described ROM from above not the "real" supported ROM for THAT HD2 is, I flashed the original 1.72 Version with a Radio of 2.07.51 (RUU_Leo_TMO_DE_1.72.111.4_Radio_CRC_Signed_15.32.50.07U_2.07.51.22_2_Ship downloaded directly from HTC.com).
I thought, maybe its the ROMs problem. However, now I face the same problems and start to think the problems are hardware related. Am I correct there, or do you guys have any other thoughts?
Could be hardware related indeed.
Did you try to run your device without SD card?
Sometimes, older SIM cards can also cause trouble.
And finally, what SPL is on your device now? You can check this information in the bootloader screen.
tictac0566 said:
Could be hardware related indeed.
Did you try to run your device without SD card?
Sometimes, older SIM cards can also cause trouble.
And finally, what SPL is on your device now? You can check this information in the bootloader screen.
Click to expand...
Click to collapse
I have a SPL-2.08.0000 (not HSPL). I run it without the SD Card aswell, but i got the same issues. Since I still have warranty on the phone, do u think I should make use of it and send it in? but then I want to make sure, that there are no traces on my phone that I installed some Android NAND versions...
SAME PROBLEM IN MY TMOU-HD2
qadeer123 said:
SAME PROBLEM IN MY TMOU-HD2
Click to expand...
Click to collapse
mine is t-mobile, but a GERMAN t-mobile, I'm not having the US-version. but what did u do? did u get a fix?
now my phone is stuck again in the boot logo, which gives me the perfect opportunity to write down all the details:
R 2.07.51.22~2
G 15.32.50.07U
D 1.72.86525
anything wrong with that? I flashed the rom, which i downloaded directly from HTC.com (the only capable for my phone (TMOU GERMANY))
fastscorpion2010 said:
now my phone is stuck again in the boot logo, which gives me the perfect opportunity to write down all the details:
R 2.07.51.22~2
G 15.32.50.07U
D 1.72.86525
anything wrong with that? I flashed the rom, which i downloaded directly from HTC.com (the only capable for my phone (TMOU GERMANY))
Click to expand...
Click to collapse
Well, you do have the older T-Mob ROM, combined with a newer SPL.
Try to flash SPL 1.66 with the program HSPL2.exe before sending it anywhere, then make a hard reset. Re-try again with the SD card out, in the worst case, there might be some buggy data in the application data folder (if there is one).
Well, you do have the older T-Mob ROM, combined with a newer SPL.
Try to flash SPL 1.66 with the program HSPL2.exe before sending it anywhere, then make a hard reset. Re-try again with the SD card out, in the worst case, there might be some buggy data in the application data folder (if there is one).
Click to expand...
Click to collapse
Thank you. with the SPL 1.66 Windows is running smooth again. But what caused all the crashes in the 3.14 version with SPL 2.08 or in Android NAND Versions with 2.08.HSPL ?? I think if I send my phone in for warranty, they tell me everything is fine with the phone....
fastscorpion2010 said:
Thank you. with the SPL 1.66 Windows is running smooth again. But what caused all the crashes in the 3.14 version with SPL 2.08 or in Android NAND Versions with 2.08.HSPL ?? I think if I send my phone in for warranty, they tell me everything is fine with the phone....
Click to expand...
Click to collapse
The official 3.14 ROM shouldn´t run with any other SPL than 3.03.
NAND ROMs require MAGLDR, and this, on the other hand, requires HSPL 2.08. If there was still a different SPL on your device (which should be checked by the tool, as far as I remember, and therefore, I don´t know if that´s possible), you might have to source of problems.
The 2 major sources of problems are a) a wrong Radio ROM or b) a corrupt SD card, in some rarer cases an older SIM card.
If your system and device are running properly now, I think it might be indeed a waste of time to send it to a service center. If you like, it might be worth to give another try with a proper installation: Put HSPL 2.08 on your device, then Radio ROM 2.15.50.04, then MAGLDR 1.13, and then a nice Android NAND build.
No need to ever boot into Windows once you start all that flashing stuff.
tictac0566 said:
The official 3.14 ROM shouldn´t run with any other SPL than 3.03.
NAND ROMs require MAGLDR, and this, on the other hand, requires HSPL 2.08. If there was still a different SPL on your device (which should be checked by the tool, as far as I remember, and therefore, I don´t know if that´s possible), you might have to source of problems.
The 2 major sources of problems are a) a wrong Radio ROM or b) a corrupt SD card, in some rarer cases an older SIM card.
If your system and device are running properly now, I think it might be indeed a waste of time to send it to a service center. If you like, it might be worth to give another try with a proper installation: Put HSPL 2.08 on your device, then Radio ROM 2.15.50.04, then MAGLDR 1.13, and then a nice Android NAND build.
No need to ever boot into Windows once you start all that flashing stuff.
Click to expand...
Click to collapse
I gave it a try, but for some reason I am unable to flash any rom anymore. I tried to flash it via SD card and via the .exe file through the bootloader. Through the .exe file the process only proceeded until 8 or 10% and aborted. Through the SD-Card it only showed the grew screen for a few seconds and returns to bootloader with "Upgrade ROM code error Please try again"
Apperantly I did something wrong, but I dont know what. Ytd I was still able to flash the original stock windows 1.72 rom from sd card, but even that one is not working anymore.
tictac0566 said:
The official 3.14 ROM shouldn´t run with any other SPL than 3.03.
NAND ROMs require MAGLDR, and this, on the other hand, requires HSPL 2.08. If there was still a different SPL on your device (which should be checked by the tool, as far as I remember, and therefore, I don´t know if that´s possible), you might have to source of problems.
The 2 major sources of problems are a) a wrong Radio ROM or b) a corrupt SD card, in some rarer cases an older SIM card.
If your system and device are running properly now, I think it might be indeed a waste of time to send it to a service center. If you like, it might be worth to give another try with a proper installation: Put HSPL 2.08 on your device, then Radio ROM 2.15.50.04, then MAGLDR 1.13, and then a nice Android NAND build.
No need to ever boot into Windows once you start all that flashing stuff.
Click to expand...
Click to collapse
I also tried installing only the radio rom, but that fails somehow as well. I flashed Radio Rom
Leo_RADIO_2.15.50.14
Leo_RADIO_2.14.50.02
Leo_RADIO_2.12.50.02_2
which i found in this forum http://forum.xda-developers.com/showthread.php?t=611787
they flash to 100% but then I get a message on the phone "Software update failed. Please try again" and the computer says "This Update cannot be used for your PDA Phone. Please check your update Utility.
anyone has any idea?
i dont know what to do anymore, the only flashing that works is hspl. i dont want to try magdlr, since the rom before hat a .51 radio, but i cant flash roms or radios....
i need some help, please.
If you tried everything, and only the official 1.72 ROM runs properly, the last remaining tip would be task 29. But I´m afraid, now that we can exclude almost everything, that the service center might be a good idea.
I would re-flash the latest ROM, which doesn´t perform well as you write, and send the device in to get it fixed.
tictac0566 said:
If you tried everything, and only the official 1.72 ROM runs properly, the last remaining tip would be task 29. But I´m afraid, now that we can exclude almost everything, that the service center might be a good idea.
I would re-flash the latest ROM, which doesn´t perform well as you write, and send the device in to get it fixed.
Click to expand...
Click to collapse
what is task 29? I havent heard about it till yet? I will give it a try. Currently I'm trying all combinaitions to at least get 1.72 to get flashed again. This one isnt flashing either right now.
big news:
I have no idea why it worked but it did.
After flashing the entire night with different methods and ROMs and Radios, I almost gave up, and thought my phone is bricked. However, i didnt touch it at all until this afternoon.
First I run HSPL.2.08 again,
then I tried to flash the Stock ROM via SD didn't work.
then I tried to flash the Stock ROM via USB: here it used to stop at 10% and gave me an error.... this time it stopped at 10% for like 30sec and then continued!!!
So now I put SPL.1.66.0000 again to have it in original condition. Can I send it in under warranty like this? Every trace has been removed, correct?
I still don't know what is wrong with the phone. 48h ago, when nothing worked, the only flashing method which did work was via SD. Then I was at branded T-mobile Windows 6.5 on a 1.72 ROM. (Basically exactly where I am now) However, THEN I tried to flash to a higher ROM (3.14) to have a radio of .50 (to flash MAGDLR etc). but this never succedded and I ended up with one flash error after the other.
For a moment I thought my Radio is broken, since I could not flash any Radio. However all the radios i tried to flash were .50 radios. The radio of the current 1.72 ROM is however a .51 version. Does that mean I have some sort of "Radio-Lock" on my phone?
If anyone has any other ideas, please let me know, but I think I dont wanna flash anything until I get the device back from HTC. However, once it get it back, how do I know that I can flash to the higher ROM again?? I am very cautious and distrustful to my phone right now.