I'm now using T-Mobile ROM lastest version, and I want to try downgrade my ROM to 1.60 Asian Rom (o2), but i'm stuck at the stage 1 (erase rom) and then it skip to the final page where said "Error 112 CE ROM update error" I tried both O2 UK and O2 Asian ROM, it has the same problem, But when i try with T-Mobile, its work!!. Anyone have an ideas? btw, I change the header of device type from PH10B to blank , bcoz it would appear another prob--> model ID error
if your device is originally branded by t-mobile ... you have to modify the country ID in the ROM file to be T-mobile
use er2003edit
1. Clean Device ID in all oarts of rom
2.flash it
I've got the same problem just now :x . I know something about flashing myself :shock: . Still I don't know how to "modify the country ID in the ROM" or how to "clean DeviceID in all parts of ROM". Where to look for step-by-step instructions :?: :?: :?:
Try this trick:
1. Get to bootloader (power+navi-key+reset)
2. Put device into cradle
2. Run update
maybe this helps :
http://wiki.xda-developers.com/wiki/HimalayaRomFlashing
Hi
Im hopeing someone can help me I know this issue has probably been discussed loads of times and im a muppet for doing it, I was looking at different ROM's for my Orange M3100 and thought I would go for the IMATE JASJAM ROM so I could get MSN messenger .... I unfortunatly selected the TELSTRA 1.06 Bootloader ROM and downloaded instead of the 1.04 ( I should have read the posts on this ROM before!). Now I am stuck in bootloader 1.06 and as I have read the only way to get back to 1.04 is to flash with a ROM that is the same as my carrier (Orange UK).... the only Orange ROM is the Romanian one thats just been put on the WIKI, I have tried with this but its coming up Vendor ID error... if anyone can help or tell me how I can go back to 1.04 id be grateful? if not do I just have to wait until orange UK bring out a ROM with bootloader 1.06 ????
Thanks a lot ! James UK
Same problem with Cingular bootloader 1.06
I've the same problem with Cingular 1.34 bootloader 1.06, I try to downgrade with same bios CID (CWS__001 as I read on this forum) to bootloader 1.06 but I receive an error "WRONG VENDER ID" (also if i leave connected my PDA and I restart RUU utility it give me the same error)
I've also tried to install another vendor bios with bootloader 1.06 as suggested but I receive the same error message!!!
Emanuele
Unfortunately, you're stuck unless you either a) wait for a bootloader for your CID or b) pay the $38 to do the super-CID unlock. There's a thread on that stickied, so if you decide to do it, help them out by doing the usb capture.
Thanks... I have already unlocked the device with IMEI-Check.co.uk do you mean this? If I have unlocked it then do you think I should run IMEI check again on the device and it may unlock the CID ? cheers, James
If you run the imei tool again (with the latest version of theire software) it will reverse your bootloader to 1.04 and make your device super CID
Does anyone have the Orange UK rom ?
Not the : HER_ORRO_123702_1060400_WWE_SHIP.exe
I have a UK preproduction unit and need the rom for this device.
Thanks,
P
What's the problem with your prepro version? older bootloader and not flashing from sd-card?
PrePro TyTn
I updated it with a Imat rom.. no problem (it's a unlocked PDA).
A couple of weeks later i was updating it with the HTC rom and my laptop went in standby mode during the update
Now my pda starts up in de bootloader screen (1.06).
No reset option will work, mtty1[1].42.exe (set 14 0) does not work eighter.
If it try to update it again it gives a "Vendor ID error".
It's a Orange UK device, and it think i need the Orange UK rom.
I tried HER_ORRO_123702_1060400_WWE_SHIP.exe...no succes.
It's the only Orange Rom i can find.
Need some help... can't use the PDA anymore
Thanks for your help..
Pim
If it's a preproduction device it should be SuperCID, but I guess your CID got corrupted during the bad flash, so no Orange upgrade will fix it. Too bad you flashed a rom with bootloader 1.06
Can you attach a usb monitor capture of the flashing process until you get the invalid vender id to confrm that?
I saved the Basic and Complete capture
Yes, it was what I said: your CID is corrupted. Bootloader 1.06 enforces CID checking and yours won't match any ROMs CID, it's just junk characters.
There are many of you with this same problem (search the upgrading forum), I hope someone comes with a fix for this soon...
ok, thx for the help.
indeed i really hope someone has a fix soon....
where to get UK Rom
Is there any way to get the UK Orange Rom anyway?
Hi, i done a fair amount of searching but to be honest there just to many posts about this to get a answer to be sure of.
If someone could spare a moment to help out i be grateful of there time.
1) How do it tell if my phone is CID locked ?.
I sure mine is a G4 model now, but i updated rom and so on, and all works ok there, but i am unsure if i used a locked rom update. So i am unsure, of course i dont wish to brick my phone like some have.
2) I live in England, UK, and like to know what are the newest roms and radio rom for my area.
Currently i have the following....
IPL 2.16.0001
SPL 2.16.0001
GSM 02.07.10
OS 2.16.9.1
Rom Version 2.16.9.1 WWE
Rom Date 2/6/06
Radio Version 02.07.10
Protocol 413.1.03
I read that radio roms do the phone side of things, and would like to update that as i get a few drops on calls, i use O2. What is the best one i can use, also can i use a radio rom from another area not just European ?
I like to test out WM6 but like others lead me to an error on CID locking (300 error code) hence i like to confirm i have a CID locked phone, but i was told when purchased it was fully unlocked.
Any help would be very greatful.
hjkl;' why no delete?
M3NF said:
Hi, i done a fair amount of searching but to be honest there just to many posts about this to get a answer to be sure of.
If someone could spare a moment to help out i be grateful of there time.
1) How do it tell if my phone is CID locked ?.
I sure mine is a G4 model now, but i updated rom and so on, and all works ok there, but i am unsure if i used a locked rom update. So i am unsure, of course i dont wish to brick my phone like some have.
2) I live in England, UK, and like to know what are the newest roms and radio rom for my area.
Currently i have the following....
IPL 2.16.0001
SPL 2.16.0001
GSM 02.07.10
OS 2.16.9.1
Rom Version 2.16.9.1 WWE
Rom Date 2/6/06
Radio Version 02.07.10
Protocol 413.1.03
I read that radio roms do the phone side of things, and would like to update that as i get a few drops on calls, i use O2. What is the best one i can use, also can i use a radio rom from another area not just European ?
I like to test out WM6 but like others lead me to an error on CID locking (300 error code) hence i like to confirm i have a CID locked phone, but i was told when purchased it was fully unlocked.
Any help would be very greatful.
Click to expand...
Click to collapse
Here is what you have to do:
- download any G4 rom from xda ftp
- unpack it
- replace the update tool from the WM6 one with the one from the G4 rom (when you will run it, it will be in italian)
- don`t worry about bricking your phone, it can only happen if you try to update your IPL/SPL and the WM6 ROM doesn`t include those upgrades.
(if your Wizard is CID-locked, after the upgrade, your OS will be the same one you had before the upgrade, if not, be happy) )
I can give a little help if you feel you can trust me.
Use a little program called pdocread.exe (by itsme) and read the bdk1 using the following command:
pdocread.exe -n 1 0 0x10000 [saved_filename] and then contact me via PM to send me the encrypted file so that i can read it and check the CID value. I must warn you that the resulting file will have your phone's IMEI in it.
For this program to work your phone must have RAPI and Unsigned Apps enabled
You could also use mtty.exe program to check the CID status by using the info 2 command
Code:
Cmd>info 2
GetDeviceInfo=0x00000002
+ SD Controller init
- SD Controller init
+StorageInit
***** user area size = 0x3D080000 Bytes
[B] [COLOR=Blue]HTCSSuperCID ' HTCE[/COLOR][/B] <------- CID status!!!
To be honest i'd prefer the first solution since i'm writing a Wizard service tool and as my phone is a full unlocked Qtek i need locked CID blocks to compare and understand a bit more about that zone.
cheers
Sent email with pdocread info. Here are my mtty results.
PHP:
Cmd>info 2
GetDeviceInfo=0x00000002
+ SD Controller init
- SD Controller init
+StorageInit
***** user area size = 0x3C8C0000 Bytes
HTCSWIZCNG01 »“4‚HTCE
Cmd>
I assume the "HTCSWIZCNG01" is just verifying what I already knew? That I am CID locked to cingular?
I managed to get a list with a lot of CID codes for different operators and will check your value (once i find the file ) but i also believe that your phone is indeed CID locked; sorry
Many thanks for the details, tried it last night but would not change, so i at least know i have a cid locked system now.
Maybe wiorth getting it unlocked, but to be honest it was more of a wanting to know if it was or was not, know i know that i happy with what i got. Maybe an offical update will work when its released.
Again cheers all for your help and advice.
Any further info still be greatful with details of first post about radio roms still if you can.
Thunder_PC said:
I assume the "HTCSWIZCNG01" is just verifying what I already knew? That I am CID locked to cingular?
Click to expand...
Click to collapse
Yep, that CID is indeed from Cingular. Check with the file attached i extracted from some file i can't recall exactly which and where i got it...
Thunder_PC said:
Sent email with pdocread info
Click to expand...
Click to collapse
Pls make new dump as it should be 64Kb (0x10000)
Hi, please someone can tell me , as i think, my 9100 is CID unlocked?:
Cmd>info 2
GetDeviceInfo=0x00000002
+ SD Controller init
- SD Controller init
+StorageInit
***** user area size = 0x1E880000 Bytes
HTCSWIZQTK01 µ…“HTCE
Cmd>
After do a CID unlock with awizard, rechecked and still showing the same.
but when i try to dump rom doing "r2sd all" in mtty1.42 it doesn´t allows me. In awizard done.
Cmd>r2sd all
***** user area size = 0x1E880000 Bytes
R2SDBackup() - Download type = 5
usTotalBlock = 1 sizeof(SDCARD_SIGNATRUE_TABLE)=512
You didn't get the proper security level to download a specific image
Cmd>
If it´s unloked, i supose, after reading forums, that i can change rom from WWE to last Spanish (2.18....)
IPL/SPL: 2.17.0001
GSM 02.07.10
OS 2.17.7.2
wait your answers. Thanks.
A quick search around the forum would have shown you that it's not possible to CID unlock a G4 device for free.
Yours is a G4 and if you compare with my values from post #4 you can see that yours isn't CID unlocked
cheers
Thanks.
i suposed that as wasn´t in CID list was unlocked. But i get it more clear.
So the only ways to change rom and language are, or pay or try it with the Solutuion found: how to flash any rom to CIDLOCKED DEVICE.
TOM_WILE said:
Thanks.
i suposed that as wasn´t in CID list was unlocked. But i get it more clear.
So the only ways to change rom and language are, or pay or try it with the Solutuion found: how to flash any rom to CIDLOCKED DEVICE.
Click to expand...
Click to collapse
Yep, either with ShellTool or with my Wizard Service Tool that allows to flash the OS binary partition
cheers
mestrini said:
Yep, either with ShellTool or with my Wizard Service Tool that allows to flash the OS binary partition
cheers
Click to expand...
Click to collapse
Hi again, it´s done.
I did it with "QTEK Rom 2.18.7.8 AKU2 ESN + Radio 02.47.11 Con CID Bloqueado by jossma". It works great, and in spanish. I have to "repair" a little problem with keyboard.
i´m happy. thanks for all. jejeje
sos.sos.sos
I have blocked SPV M3000
CID: WIZORGB8
Phone is CID LOCKED!
Which withdraw drinking
plz HELP ME !!!!!!!
hi everyone I know im posting in the wroge thread but this site is really huge, I need any help cuz i begin to hate my ppc and im stiil a student and cant buy another one cuz my father is really anoying, so i got an i-mate pda2 which i really love its design but the prob. is wm2003se there is no other roms i can find + i dont know how to get this cid unlocker and any rom just any , i will be pleased v.much for help i want the links where i can find a cid unlocker and a new rom which can run manila or wm5,6 plz helppp :'(
Hello everybody from Russia (Moscow).
My phone model is O2 Xda Neo (Germany)
I have used this
278638-ruu_prophet_215746_2157138_023021_qtek_rus_ship
RUU_215737_2157135_023021_QTEK_s200_RUS
and return back to original O2 Germany without problem.
But I have installed next:
RUU_Prophet_220734_2207114_024721_QtekWWE_Ship
Now I cannot install any other software. only this english version.
In install time (on 95%) I got next message
error 326: invalid command - the NBF file could not be used for your PDA phone - please check your NBF file
Boot screen has
IPL 2.15.0001
SPL 2.20.0001
The phone is ok. I can install this english version again, but I would like return to original German version or Russian.
I tried to use
pdamobiz.com_downgrade_and_unlockcid
and RUU_Prophet_2151327_21513121_021921_DOP_ASIA_WWE_Ship-NoVendorID
but it does not help.
Can you help, please?
piece of cake:
what do you need is
reCOOK the ROM using molski.biz devpack...
just be sure to remove the ipl/spl nb file after you've extract the nb.nbf file
downgrade
Hi,
I have searching for a long time and used so much tools to downgrade my Qtek S200 Pocket PC to JAMin_WWE_1000925_10009114_11420_ship.exe (SPL 1.xxx, IPL 1.xxx)
When directly run "JAMin_WWE_1000925_10009114_11420_ship.exe" I get this error: the NBF file could not be used for your PDA phone - please check your NBF file
JAMin_WWE_213923_2139123_022021_shi.exe ROM is not my solution. I need to change my IMEI. iWizard and Lokiwiz03a don't help me to change IMEI.
Can anyone help me how to do Rom Cooking for SPL 1.xxx?
http://www.molski.biz/ here the rom cooking program and it is complicated a little bit.