Hi all,
My atome exec does not turn on. I tried going to bootloader and after that the device resets and the O2 screen comes. After a while it blacks out. The phone signal indicator does blink and when I call to its number it rings (the ring I hear is from the phone which I am calling from). Nothing happens to the Atom Exec, its just blank. I tried hard reset but again same process the O2 screen comes and blacks out. Please advice........
update ur O2 with the latest software.
Hi,
I went home charged it fully and switched on. Lucky for coming alive even without the data.
Related
I upgraded my himalaya to WM5 using llbasha's rom. Everything was ok, all functions of my device was working. But one day i saw my devices screen was shaking like a old tv near a ringining cell phone. When i reset my device i see screen become white and device dont turn on. I charge battery on cradle and try about 4-5 times to turn it on i turns on but turn it on is really hard. I tried to downgrade it to WM2003 or some other roms but himaupgradeut doesnt recognise my devices rom and extrom or ce version. I tried to go on to flash the rom. Flashing finished but it was still WM05 but with WM2003se splash screen. And still screen was shaking ang still i was living white screen problem. I checked sccren connector and it was ok. Whenever i look bootloader it shakes too. I think problem is about device, not about display because when i live white screen problem any of lights turn on or any buttons work. If anyone can help me or give any advice i thank a lot.
Best regards
Azkuhraad
Solved
I solved problem by changing mainboard of device.
Hi All,
Do anyone here face this problem? The device automatic switch off while in standby mode. This happen to me after 1 month of uses. When the device when off, it was very difficult to power on back. Pressing the on/off button wont fully boot the device, only to go off again after you see the O2 welcome screen. Only by soft reset work.
The last time happen to me, sofe reset don't works. I have to connect it to power supply and press the soft reset button.
One of my friend also facing this problem, bring back to the service center and was told it was battery issue.
Regards,
Ric
Hard reset the device. And then disable the O2 Connect completely by going to O2 Connect->Options->stop o2 connect service.....
You mean by disable O2 connect can prevent the device from auto shutoff?
I can try that, but I don't think so it is the cause of the problem.
I did too but ...............
mlai said:
Hard reset the device. And then disable the O2 Connect completely by going to O2 Connect->Options->stop o2 connect service.....
Click to expand...
Click to collapse
I have same problem as stated. I did as you suggest. BUT now working.
So, even the latest model suffers the same problem as the first Atom.
We also have this problem, and it is due to battery holder problem, when the terminals does not come in contact with the unit properly. Atom users have done a lot of things already - clean the terminals with alcohol using cotton swabs, put some paper support to tighten the battery in place, etc.
I'm just surprised that even the latest model for the Atom series still suffer the same problem.
I had the same problem with WM5 rom. But after upgrading to WM6, I never have this problem anymore. Which rom are you using?
hey guys
had an issue today, traded a desire for a HD2 as i really wanted to go back to winmo (crazy most people will think)
Now when i revieved the phone i turned it on everything seemed fine for about 20 mins (note i never used the phone apart from make a call to test)
by the time i had left after a good chat, i checked the phone back at work at it was turned off, i plugged in the charger, the little notification came on and i left it to charge, an hour later after a meeting i turned on the phone, it booted into windows and then after loading sense it crashed and restarted then got stuck on the splash screen
numerous battery pulls and the same issues, gets into windows doesnt load sense, freezes and blank screen, when i battery pull and turn on 90% stuck on the splash screen
installed a rom from the memory card (stock) worked for 10 minutes same issue
any ideas?
do you reckon iv been given a knackered phone?
anyone? iv managed to get it to boot, but after around 10 minutes, it just turns itself back on, pauses at the htc screen, then reboots again and gets into windows, then 10 minutes later does the same, i flashed to the most recent wwe firmware from htc, after it managed to stay on long enough to sync to the pc
im stumped
http://forum.xda-developers.com/showthread.php?t=683168
Check the three little 'fingers' connecting to the battery.
abhavananda said:
http://forum.xda-developers.com/showthread.php?t=683168
Check the three little 'fingers' connecting to the battery.
Click to expand...
Click to collapse
checked already, found that on a search earlier, im now getting the phone vibrating repeatedly on startup on the splash screen
i think its a dud phone
please guys any ideas im all out
Had similar issue with my phone, random reboots after phone was working for a bit, stuck on bootscreen without displaying radio, partitions etc.
Called HTC, was a hardware issue obviously, the sent me a new replacement phon (warranty).
if you have HSPL
1. Task 29
2. when stuck in blank screen - pull battery out
3. bootloader
4. connect back to pc via usb
5. flash any stock ROM (not the latest 3.14 as it will change your HSPL)
Hello everyone, I am relatively new to all of this and was wondering if anyone can help me with an issue I am currently having with my T-mobile HD2. It was given to me by a friend because it continuously reboots over and over. It gets to the orange Windows screen and then dims and restarts. I have looked all over and can not find a solution to this problem. So far I have soft and hard reset the phone. Any help will be greatly appreciated.
For those wondering there has been attempt to add a custom rom onto the phone. It is basically a standard version of the HD2.
-Vash05
I had the same problem but it complete restarted after a several loops. When it didnt, HardReset. Then the problem disapear after the new rom 3.14.
check for bent battery pins.....
I have checked the battery pins and they appear to be fine. There aren't bent in any odd way. I have also allowed it to loop until the battery failed on me. The screen at which it reboots on says
"Preparing your phone for first use. The Today screen will be displayed when this process is complete."
It also has a loading bar on that bottom that makes it about 5% through before rebooting again. I took the phone to a so called repair shop but the worker told me that it is an operating problem and that nothing can be done. Is there any truth to that statement?
there is a very small chance that the reset loop could be caused by overheating,
nevertheless, if you're out of other ideas, try putting your phone in the fridge for 10-15 minutes before turning it on
Hi All,
Today morning my S10 lite started going display off automatically and I tried to hard restart by Power+Vl.Down it shown splash screen and restarted.. then again same issue of display off. then again I tried hard restartd for couple of times its switching on, vibrating when on but no display at all. Do I need to wait until the battery is drained and charge it and check? or display is gone? or any other methods to check? thanks in advance.
hemukay said:
Hi All,
Today morning my S10 lite started going display off automatically and I tried to hard restart by Power+Vl.Down it shown splash screen and restarted.. then again same issue of display off. then again I tried hard restartd for couple of times its switching on, vibrating when on but no display at all. Do I need to wait until the battery is drained and charge it and check? or display is gone? or any other methods to check? thanks in advance.
Click to expand...
Click to collapse
Hard to say. Could also be a battery issue. Best to let it be checked in a mobile device service center/repair shop.