Is there any way to install kitl through a mtty process.
Related
HI i'm sticking in the KITL, in the KITL i can see the USB in the white area.
i Try to connect mtty.exe but there is only the prompt
Cmd>
why? i need ....
USB>
i need to unbrick my TyTn
my IPL is 1.04
SPL 2.10.Olipro
i try to flash shaps rom but then come the [error 286] after 12%
now i dont know what i can do.
and yea i have install Hard Spl V7
PLS help, yea i have read the WIKI and yea i have search in the forum..
Did you select 'USB' in the Mtty Port drop down and not the 'COM's?
You press Enter key twice and USB> will appear.
I had the same issue, although I chose USb from the drop down menu and hit enter twice, the prompt still kept saying CMD>
Nevertheless, I went on to input the same commands (my Tytn was semi-bricked after a botched radio upgrade). After the password 0000000000000000 command , I got back an 'incorrect password' response, or something like that, but went on. I managed to then flash TNT 2.0 again and recovered from the no gsm problem by removing teh battery several times and resetting. Not sure if the CMD > prompt actually accepted the commands or not.
Hi
I'm trying to explore my new device the german XDA Comet aka XDA Atom Life.
To enter into the bootloader semms different to the Atom.
To enter the bootloader you must press the voice notice-key and the softreset-key together.
After that we have the options :
(1) Enter OS
(2) Enter GSM AT Mode
(3) Enter GSM AT+ Diag Mode
(4) Enter GSM Download Mode
(5) Burn MOT/BL via UART
If the USB cable isn't conected,
you can choose those options by pressing the left or right D-Pad key and select with the center button.
In HTC devices you can handle the bootloader via USB cable and MTTY.exe
That doesn't run on XDA Comet, but how can I conect the device via terminal ?
Is there anny documentation about the bootloader commands ?
An other option : if you press the left D-pad key and softreset, the bootloader comes in "SPI-Mode"
After opening the bootloader image with an hexeditor there are so many options, the bootloader has. There must be a way to use it.
scorpio16v said:
Hi
I'm trying to explore my new device the german XDA Comet aka XDA Atom Life.
To enter into the bootloader semms different to the Atom.
To enter the bootloader you must press the voice notice-key and the softreset-key together.
After that we have the options :
(1) Enter OS
(2) Enter GSM AT Mode
(3) Enter GSM AT+ Diag Mode
(4) Enter GSM Download Mode
(5) Burn MOT/BL via UART
In HTC devices you can handle the bootloader via USB cable and MTTY.exe
That doesn't run on XDA Comet, but how can I conect the device via terminal ?
Is there anny documentation about the bootloader commands ?
Click to expand...
Click to collapse
Hi Scorpio, finally you have your Comet? Unfortunately, I have been searching for the option to connect the Atom via terminal. It's difficult to do debugging...
If you would however, look at your bootloader in a hex editor, you would find interesting things.... menu options that are not readily seen by going into bootloader mode. As for MTTY, I never got it to connect. Same for Putty as well.
My HTC TYTH is stuck in the KITL Mode.
screen displays:
"Select KITL Transport:
USB KITL
Ethernet KITL
Select KITL Mode:
Active
Pasive
M05
S04
B05 D2.11
Not sure how this has happened.
Can anyone help?
how to use mtty and boot command??
close activesync, start niki in bootloader, connect with usb, launch mtty, new connection, usb, write "boot" end then push enter
thanks a lot.
Cmd>
Cmd>password BsaD5SeoA
Pass.
HTCST ÚÈÒHTCEPassWord: BsaD5SeoA
Cmd>wdata
Command is Locked!
Cmd>
==================
IPL 1.04
SPL 2.03
cannot load kittL
i think the password were wrong.
i'ved tried all the method exept JTAG..
it seems my Boot Loader version is the most annoying..
i've tried all HARDSPL.. nothing worked
i'm using the power + ok + reset button to enter BL
my device keep stucking on WM Splash Screen..
please help me
is there any way to flasing BL using mtty with my condition? please tell me..