Cmd>
Cmd>password BsaD5SeoA
Pass.
HTCST ÚÈÒHTCEPassWord: BsaD5SeoA
Cmd>wdata
Command is Locked!
Cmd>
==================
IPL 1.04
SPL 2.03
cannot load kittL
i think the password were wrong.
i'ved tried all the method exept JTAG..
it seems my Boot Loader version is the most annoying..
i've tried all HARDSPL.. nothing worked
i'm using the power + ok + reset button to enter BL
my device keep stucking on WM Splash Screen..
please help me
is there any way to flasing BL using mtty with my condition? please tell me..
Related
How do I identify the CID on my TyTN from Vodafone?
alfazulu said:
How do I identify the CID on my TyTN from Vodafone?
Click to expand...
Click to collapse
bootloader command "info 2":
http://wiki.xda-developers.com/index.php?pagename=Hermes_BootLoader
Use mtty.exe to connect, link is on this wiki page too.
MTTY ust says CLIENTCLIENTCLIENT but I cannot type any command.
Any suggestions?
- open mtty.exe
- select USB port on the drop down list
- put your Hermes in bootloader mode (side ok + power + stylus reset)
- connect your hermes to pc using miniUSB cable
- on the tri-color screen "serial" should be changed by "USB"
- click ok on mtty to connect
- hit enter twice, a "USB>" prompt should appear where you should be able to type in bootloader commands (do not copy-paste the commands, type them using the keyboard).
- "info 2" should give you your CID, encapsulated on a "HTCS + CID + 4byte checksum + HTCE"
Thank-you. I get HTCSVODAP001©®±HTCEUSB>.
That means this is your CID: VODAP001
help i cannot get only get cmd> and i follow the guide. how i get the usb>
On new bootloader version USB> has been replaced by Cmd>, but the process is the same.
If you have HardSPL with "info 2" you'll always get "SuperCID", so if you want to check your real CID use "info 4".
Any tips on getting Mtty to work with vista? I have tried everything under the sun and no go for me. I can flash radios and ROMs all day long but when it comes to Mtty i have no luck what so ever! Please prof help...
mines showing as
USB>
USB>info 2
CID: Wait interpreter timeout
HTCSF kEØ(HTCEUSB>
is it corrupt then? and if so how can i fix it with a device thats bricked already?
Smith2001 said:
is it corrupt then?
Click to expand...
Click to collapse
yes
Smith2001 said:
and if so how can i fix it with a device thats bricked already?
Click to expand...
Click to collapse
i already answered you here, use platform builder!
Is there any way to install kitl through a mtty process.
HI i'm sticking in the KITL, in the KITL i can see the USB in the white area.
i Try to connect mtty.exe but there is only the prompt
Cmd>
why? i need ....
USB>
i need to unbrick my TyTn
my IPL is 1.04
SPL 2.10.Olipro
i try to flash shaps rom but then come the [error 286] after 12%
now i dont know what i can do.
and yea i have install Hard Spl V7
PLS help, yea i have read the WIKI and yea i have search in the forum..
Did you select 'USB' in the Mtty Port drop down and not the 'COM's?
You press Enter key twice and USB> will appear.
I had the same issue, although I chose USb from the drop down menu and hit enter twice, the prompt still kept saying CMD>
Nevertheless, I went on to input the same commands (my Tytn was semi-bricked after a botched radio upgrade). After the password 0000000000000000 command , I got back an 'incorrect password' response, or something like that, but went on. I managed to then flash TNT 2.0 again and recovered from the no gsm problem by removing teh battery several times and resetting. Not sure if the CMD > prompt actually accepted the commands or not.
I've tried to get CID of my Mozart (as I've got mine from ebay and not sure what market it was destined for) and all I've got so far is:
1. I need to get mtty running (http://forum.xda-developers.com/showthread.php?t=623356)
2. I need to execute "task 32" and then "info 2" to get CID.
I went through first step and stuck on the second. once I execute "task 32" mtty on any key press outputs "<CE-1637352>". Also phone does not switch back to Serial if I disconnect USB cable. I'm able to reconnect with mtty only after restarting into bootloader mode again. I tried "info 2" without "task 32" but mtty responds with "Command error !!!". Am I doing smth wrong or is there other way to get CID from device?
Same problem
I installed the android 10 update bit suddently when i rebooted it got on bootloop. I tried to go recovery and format it but it dodnt worked. Tried using mi flash but nothing happens. There is any way that i can unlock bootloader? (Cant boot and unlock oem)
Use the following codes on the adb after entering fastboot mode
First enter fastboot mode by pressing power and volume down until fastboot mode starts(about 10 sec)
Then enter the code
1) fastboot flashing unlock ( press enter)
2)fastboot --set-active=a (press enter)
Then run mi flash tool. Your phone should start.
Doesn´t work because the phone is locked and i can´t unlock it because don´t boot. That´s the problem.
Claim warranty!
afonso14401 said:
Doesn´t work because the phone is locked and i can´t unlock it because don´t boot. That´s the problem.
Click to expand...
Click to collapse
Since your bootloader is locked and this loop occurred while officially updating you could claim the warranty and they will fix your phone for you.