please help me
when i see the screen it looks like my old colour TV
I' ve opened the cover but the problem is the same. Then shenged the Rom version but no success When i overclock the Pocket pc up to 236 Mhz for 2 minutes everything is ok and then the same problem
help!!
Related
My phone shows a white screen with some black vertical lines .I have tested many ways to solve the problem.
1.rebooting
2.soft reseting
3.hard reseting
4.taking out the battery and reinserting
5.using refrigerator for colding
6.openning the phone and reconnecting the LCD ribbon
But none of them was useful.I can call ,use media player ,active syne with computer and ... The phone is completly functional.I can use SOTI Pocket Controller-Pro to see the sreen on computer and all the featurs of my phone are working perfectly only the screen of Jamin is white. I have searched many forums and realized this problem has occured to many and this is unbeleavable that i can't find any solution.
It sounds like the screen hardware.
Check the ribbon cable again.
If that fails, you may need to get a new LCD module and replace the one you have now.
Hellow everybody! 4 days ago I got the screen I ordered from ebay and I have a big problem! I installed the screen on the phone, and the phone was booting up, the touch screen worked I could sense the lock screen when I touched it but nothing! Also the phone was burning! after noumerous tries , the screen finally worked the next day! But one day after , it had the same problem!Now the screen is black since two days ago! Any help! I tried repairing with pc companion, but the screen still remains black!!
Since you installed it yourself, you maybe made a mistake during install, something wrong got connected or something.
You said, that phone heated up. Some connections could have melted or even some chips.
xperia mini pro
The phone worked for a day before repairing. And it didnt worked for two days berfore repair, after it had worked!!
Does it work now or not?
Yes it works , the touch screen works i can feel it by sliding the lock button.
But it remains black, i heard sound about the battery. so the phone works but the screen remains black.
Seems like connection issue between mainboard and the screen. You mentioned getting warm - could have been too hot for the connections.
Sent from my WT19i using xda premium
No I've trying installing the screen many times , but the heat was coming from a single part of the motherboard , i opened the phoned and touched it! It was burnig hot! Now there is no heat , the phone boots up, i can sense the lock sliding when I move it (vibration) but i cant see anything!!! It worked for day perfect! The first morning , heated for some time , but it work after ten minutes for a whole day with no problem! the next day i went to the cafe of the village and connected to the internet by wi-fi connection, when I left, the problem started again ! And the phone is working , as I mentioned before, but the screen isn't viewing anything!
Hello to you all.
Need some help, bought a chinese Galaxy SIII compatible a little less than 2 months ago, model: star i9300 3G, MTK6577.
Today the screen stopped working though the phone itself keeps working and getting calls, just the screen stays black.
Nothing happend to the phone, it didnt fall down or got knocked or got wet, it did worked well this morning.
I tried to charge the battery fully and change to a different battery, didnt help.
Please if someone has any idea,clue,experience what to do.
Thanks in advanced.
Gaby
P.S - hope i'm in the right forum.
- Maybe something with the Proximity sensor ??
hi guys
yesterday i bought second-hand s3 device , and i have this problem in screen
if you see the attachment below you will notice shadow icons and they stick all the time .however, there is no problem in screen touching
please help me
You have screen burn, where the phone has been left on for many hundreds of hours and the dock icons have made a permanent mark.
There is no way to cure it.
Hello guys i need your help...
The display of my Redmi note 3 Pro is broken, so i bought a new Display and replaced it with the old one.
But now my phone is stuck at the first android logo.
When i leave the digitizer disconnected and only connect the LCD it boots!
When i connect the Digitizer from the broken display and the LCD of the new one, it boots too!
But when connect both digitizer and LCD of the new one, stuck at android logo again!
At first i thought the digitizer is broken, so i sent the new display back and ordered a second (new) one from different trader, but same behavior.
What is the problem?!
Please help
Try reflashing the entire rom via edl, after connecting the new display.
okay great, it works now.
but now on every boot my phone is stuck at mi logo for about 2 minutes until it boots and i cannot access recovery.
any ideas?
How did you get the Screen of the phone?!
On mine it's stucking to the phone!
watch on youtube https://www.youtube.com/results?search_query=redmi+note+3+pro+lcd+replacement
It's possible different screens, tianma to boe, and system need reinstall some driver.
blackout1911 said:
Hello guys i need your help...
The display of my Redmi note 3 Pro is broken, so i bought a new Display and replaced it with the old one.
But now my phone is stuck at the first android logo.
When i leave the digitizer disconnected and only connect the LCD it boots!
When i connect the Digitizer from the broken display and the LCD of the new one, it boots too!
But when connect both digitizer and LCD of the new one, stuck at android logo again!
At first i thought the digitizer is broken, so i sent the new display back and ordered a second (new) one from different trader, but same behavior.
What is the problem?!
Please help
Click to expand...
Click to collapse
all three color variants have display from different manufacturer, btw how much it costs you..?
blackout1911 said:
watch on youtube https://www.youtube.com/results?search_query=redmi+note+3+pro+lcd+replacement
Click to expand...
Click to collapse
But In the Videos on YouTube they skip the Part of getting of The Screen!
thanks for the reply guys, Flashing firmware worked, but i still cannot access recovery and on every boot, the phone stucks at mi logo for 2 minutes until it boots.
meganoahj said:
But In the Videos on YouTube they skip the Part of getting of The Screen!
Click to expand...
Click to collapse
you have to heat up the display with a hairdryer or something because the display is attached with glue. then you have to get between the display and the frame of the phone with your nails or a thin plastic.
suction cup also possible see https://www.youtube.com/watch?v=sjHMp9ayjak @ min 6:20
blackout1911 said:
thanks for the reply guys, Flashing firmware worked, but i still cannot access recovery and on every boot, the phone stucks at mi logo for 2 minutes until it boots.
you have to heat up the display with a hairdryer or something because the display is attached with glue. then you have to get between the display and the frame of the phone with your nails or a thin plastic.
suction cup also possible see https://www.youtube.com/watch?v=sjHMp9ayjak @ min 6:20
Click to expand...
Click to collapse
OK thank you. I tried it with heating but my suction Cup was too bad so it didn't work i will try it again with a better one.
i got same problem, waiting for help and solution.