Hello,
It seems when I press the Jawbone button and I hear a tone and the symbol comes up on my tytn, the tytn still takes the voice commands through the mic on the tytn and not through the jawbone.
Any idea what I could be doing wrong?
Thanks.
LIP
lip said:
Hello,
It seems when I press the Jawbone button and I hear a tone and the symbol comes up on my tytn, the tytn still takes the voice commands through the mic on the tytn and not through the jawbone.
Any idea what I could be doing wrong?
Click to expand...
Click to collapse
Yeah, simple.. You didn't bother to read and/or search!
The stock voice dialer with recorded voice tags works fine with Jawbone, tap the button and wait for the beep, two quick taps to redial.
MS VC has issues with Hermes on any BT headset in terms of audio output directing, you'll have to search the threads for info on patches in the works.
Thanks.
I actually did read but chose to search this forum only and didn't find what I was looking for.
I searched the other Hermes forums and found a big thread on the topic.
Cheers,
LIP
http://forum.xda-developers.com/showthread.php?t=283412
Check the Wiki under upgrades...
Related
Can I use my Nokia CK-1W carkit with my MDA3. Does anyone have that info.
I use my 9090 with a sony ericsson HCH300 car kit,
Works great!
The ericsson car kits work better than the nokia with the pda's, they pair up ok but incomming caller complains or echo.
i use parrot ck3100, but don't I get that when I enter to the car, it is connected alone to the pda??
regards
hugot said:
I use my 9090 with a sony ericsson HCH300 car kit,
Works great!
Click to expand...
Click to collapse
Hello Hugot
tell me something, with HCH300 you can answer the calls trough the carkit or you have to press the green button on the pda?
Any complaints on the other end? do your friends complaint about that echo problem or something like that ?
Portuguese do it better
can't find it !!!!
I've been searching for the SonyEricsson site for tha HCH 300 car kit and can't seem to find it anywhere...
i've found HCB-300 and HCB-30....any of these ???
I ment HCB-300 and NOT HCH-300 (Sorry).
Hello Hugot
tell me something, with HCH300 you can answer the calls trough the carkit or you have to press the green button on the pda?
Any complaints on the other end? do your friends complaint about that echo problem or something like that ?
Click to expand...
Click to collapse
I can answer the calls where i want, either on the pda or on the car kit button, i can even redial without touching the pda.
No complaints on the other end, no echo, my friends complaint about echo sometimes but it's when i'm talking to the pda, without car kit.
another question...
hugot said:
I use my 9090 with a sony ericsson HCH300 car kit,
Works great!
Click to expand...
Click to collapse
hello again Hugot,
tell me, can you get other sounds through HCB 300? like navigation instructions for example ? or mp3 sounds ?
hugot said:
I ment HCB-300 and NOT HCH-300 (Sorry).
Hello Hugot
tell me something, with HCH300 you can answer the calls trough the carkit or you have to press the green button on the pda?
Any complaints on the other end? do your friends complaint about that echo problem or something like that ?
Click to expand...
Click to collapse
I can answer the calls where i want, either on the pda or on the car kit button, i can even redial without touching the pda.
No complaints on the other end, no echo, my friends complaint about echo sometimes but it's when i'm talking to the pda, without car kit.
Click to expand...
Click to collapse
Hugot, i currently have installed the Nokia CK-1W carkit. The other party is complaining about echo. With the SE HCB-300 this is not happening? Please be honest, cause i am about the remove my NOKIA and install the SE one.
I use my Qtek 9090 with a Nokia C7-7W carkit. I hear my callers and whom I call to very well, but they hear an echo. Can anyone tell me how to prevent?
I use a parrot ck3100, the only problem that I have is that I don't get that they are connected alone when I enter to the car and I light the contact.
regards
try upgrading the parrots firmware from driveblue.com and making sure bluetooth is switched on before the parrot
i have the last versión, the one problem is that the parrot don´t connect to pda only when i enter in the car ....
Sorry about my late answer if it stills help here it goes.
I can't use anything else then phone calls with my HCB-300. No Mp3, directions, etc, even the ring tone is from the car kiy and not the one on the phone.
No one has claim about echo or anything else, i think that the other callers can't even notice that i'm using a Car KIT.
It's GREAT!
I got a Parrot CK3100 yesterday and I don't get any echoes which is good, the Nokia ones seem to echo a hell of a lot.
Caller ID on the car kit works, and once the contacts have been sent via bluetooth (one by one unfortunately ) the name pops up on the LCD display, its really good, better than I thought it could be when I ordered it.
Haven't tried voice dialling yet, has anyone who has one set the option to use voice dialling from the car kit instead of the phone? does this work?
Don't know if this has been posted before or not.
With the Prophet and Wizard Cyberon Voice Commander would work once via BT then die because it left the audio gateway open. After installing the Dopod 838 Extended ROM on my TyTn (I wanted Voice Commander) it works properly! I can issue a call via hitting the button on my headset after the call I hit the button again and Voice Commander works answers!
Anyway thought I would share.
Thanks
Do you get all commands routed through the headset everytime? With my Nokia BT Stereo headset the first time invoking Cyberon voie dial or the full voice command from the headset I get confirmation through the headset. after that all sounds come from the phone speaker. Also what BT headset do you use?
Give me an example of what you are doing and I will try to replicate here on my end. If you are referring to Dialing a contact or number yes it does work properly
I am using the Plantronics Voyager 510S
All I'm trying so far is just to get all voice commands and confirmations through my BT headset. Pressing the voice dial key on my headset starts Voice dial/Voice command and I hear the prompt in the headset earpiece. Pressing the headset voice dial button again starts voice dial but now the voice dial prompt comes from the phone speaker. I think this may be a headset issue, not sure how Nokia has implemented the Handsfree profile.
On my Plantronics I press and hold the button the headset I hear a beep then 1sec later I hear another tone I release it I get 'Say a command' If I say Dial John Smith I get confirmation home, mobile etc after I confirm I get 'Dialing' all this is through the headset. Is this what you are asking?
Yes, that's what I don't get with my nokia. thanks for confirming that, I think I will have to search for a more compatible headset.
efjay said:
Yes, that's what I don't get with my nokia. thanks for confirming that, I think I will have to search for a more compatible headset.
Click to expand...
Click to collapse
Please note I could not get Voice Dial to work properly, and I am not using MS Voice Command I am using Cyberon Voice Commander and it is working. Just want to make sure we are on the same plate (so as to speak)
Yes, I know you mean the full Cyberon Voice Command. That's what I have been trying as well.
Get with the program people... your phone will work MUCH better with MS VoiceCommand than it does with the crap OEM Cyberon stuff.
Fork over the dough... it's the best $39.99 you'll ever spend on PPC software!
goestoeleven said:
Get with the program people... your phone will work MUCH better with MS VoiceCommand than it does with the crap OEM Cyberon stuff.
Fork over the dough... it's the best $39.99 you'll ever spend on PPC software!
Click to expand...
Click to collapse
Bought it don't like it, it rarely understands my voice and Cyberon Voice Commander works with my BT headset without hacking the reg, I don't need it to announce the time, appointments etc. just voice dial.
goestoeleven said:
Get with the program people... your phone will work MUCH better with MS VoiceCommand than it does with the crap OEM Cyberon stuff.
Fork over the dough... it's the best $39.99 you'll ever spend on PPC software!
Click to expand...
Click to collapse
I do own MS voice command and even with the reg hack it doesn't work well over bluetooth. The Cyberon software just works.
marka2k said:
efjay said:
Yes, that's what I don't get with my nokia. thanks for confirming that, I think I will have to search for a more compatible headset.
Click to expand...
Click to collapse
Please note I could not get Voice Dial to work properly, and I am not using MS Voice Command I am using Cyberon Voice Commander and it is working. Just want to make sure we are on the same plate (so as to speak)
Click to expand...
Click to collapse
It now works properly on my TyTN with my Nokia after a reinstall of BOTH Cyberon files from the Dopod extended rom.
efjay said:
marka2k said:
efjay said:
Yes, that's what I don't get with my nokia. thanks for confirming that, I think I will have to search for a more compatible headset.
Click to expand...
Click to collapse
Please note I could not get Voice Dial to work properly, and I am not using MS Voice Command I am using Cyberon Voice Commander and it is working. Just want to make sure we are on the same plate (so as to speak)
Click to expand...
Click to collapse
It now works properly on my TyTN with my Nokia after a reinstall of BOTH Cyberon files from the Dopod extended rom.
Click to expand...
Click to collapse
I shotgunned it and installed the entire Dopod Extended ROM since I did not know which cabs were the Voice Commander files, which ones did you reinstall?
Glad it's working for you!
The two files are:
D_CVC-PPC-WWE-606161-DopodHermes.CAB
PT_CVC_Path.sa.CAB
I didnt install the second file. You could also install this one to map the voice command button during install rather than manually going to settings
P_Button5_VCommand.CAB
I wonder why the Dopod phones always seem to come with the full version and other versions only have the Voice dialler version. At least HTC should give us the option to purchase the full program.
can I flash Dopod Cyberon Voice Commander to new ROM 1.35??
False alarm, I should have read better. THANK YOU VERY MUCH EFJAY!!!
Didier
I upgraded from the O2 XDA mini to the Orange M3100 and use the same Sony headset and can't get the voice tags to repeat in the headset after they have been recognised. It worked fine with the O2 phone, you pressed the headset power switch briefly, said the name and the phone played the match back to the headset. This new phone simply shows the name on the screen and repeats through the phone speaker. Tried to pair it again but still the same, anyone had this and found a fix?
As an update I was using the voice dial function the other day sat in the car and could hear the recorded name in the headset but it's reall quiet. The previous HTC phone was a lot louder so is there anyway to increase the volume of the spoken voice tag in the headset, I have the headset volume up full but still it's too low to hear properly.
I've seen some other posts on getting stereo headsets working with this Orange device. Can anyone help me find a way of getting the phone to increase the volume of the repeated voice tag in my bluetooth headset please?
Well there are only 263 posts re. Bluetooth and headset problems in this thread
http://forum.xda-developers.com/showthread.php?t=285419
If you can't find any answers there, there are about another 10 threads about headset and bluetooth problems, about 15 threads on Voice Command problems and you combine the two and you have a nightmare
... almost makes you want to use a wired headset and hand dial.
Trust me, I thought this would be easy.........
The previous HTC device I had (Wizard with O2) worked fine, press headset button, speak, phone confirms back and then dials. This one has such a low volume that you can't hear what it says. I read through a load of the posts but they all seem to be trying to solve problems I don't have, for me the headset and phone works, the TomTom GPS v6 also works, the TCP video software is almost there and all of this without having to hack any programes.
I tried it again today and before when I thought it was very quiet it was in fact the speaker on the phone I was hearing on the seat next to me, the headset does not reply the voice tag.
Surely others must be using BT headsets with this phone and use the voice dial tags when driving etc?
Roy_S said:
Trust me, I thought this would be easy.........
The previous HTC device I had (Wizard with O2) worked fine, press headset button, speak, phone confirms back and then dials. This one has such a low volume that you can't hear what it says. I read through a load of the posts but they all seem to be trying to solve problems I don't have, for me the headset and phone works, the TomTom GPS v6 also works, the TCP video software is almost there and all of this without having to hack any programes.
I tried it again today and before when I thought it was very quiet it was in fact the speaker on the phone I was hearing on the seat next to me, the headset does not reply the voice tag.
Surely others must be using BT headsets with this phone and use the voice dial tags when driving etc?
Click to expand...
Click to collapse
I don't have these issues so don't know the exact thread but I have read that many ppl are having the same problems as you. I think they have solved all but incomming notifications - so go looking and you should find.
I use an, admitedly ancient, Icon BT Headset for calls while driving, and all works well with one annoying problem.
With all other phones that I have used this with, the Headset synchronises completely with the phone. By this I mean that once connected, the phone's speaker is disabled and all keypad sounds, tones and other noises come through the Headset. To answer a call I could press "answer" on the phone OR press the button on the Headset, and the same to hang-up. Lovely Jubbly.
However, with the Blackstone, I have to Slide to Answer the Phone and then press the button on the Headset to activate that. Pressing the Button on the Headset alone does not answer the phone but instead tries to activate the Voice Dialling function, whether or not there is an incoming call.
The only noises that come through the headset, except while "in a call" are the ring tones.
Now, I ask, is this a problem with the Headset or, is that just the way things are with the Blackstone and BT Headsets?
If it's just that mine is old and knackered then I will get a new one, but i do not want to shell out for something that is not going to fix the problem.
OK. How about I rephrase the question.
Most of you out there use BT Headsets of some description. Which ones work like a common or garden phone?
Any? None?
Just want some advice before shelling out on trying to fix a problem that may or not be fixable.
Before you go spending money, try this software. It is fully featured and free for 15 days. It is an alternate bluetooth stack for Windows Mobile. See if it fixes your situation.
thanks for the advice.
been away, so only just got the message.
have installed. will report back with how it goes.
Hi, i'm Jay i recieved my HTC Touch Pro 2 the other day and i've paired my Sony Ericsson bluetooth headset but i cannot get it to voice dial.
I've installed Vito Voice Dialer, set up the voice command but still no luck with the voice dialing.. Is there a particular headset i need to be able to voice dial or do i need a different programme?
I need the voice dial to work through the headset..
Thanks in advance
No Voice Dialing
It is not possible at this time, because TP2 has another blue tooth stack (see also different threads here).
Gerhard
just a matter of time though mate..... prob happen soon <fingers crossed>
I can get bluetooth voice dial to dial through my car stereo... isn't it using the same technology?
VoiceDialing via Bluetooth handsfree
leanne said:
I can get bluetooth voice dial to dial through my car stereo... isn't it using the same technology?
Click to expand...
Click to collapse
Can you cut out your ROM VoiceDialing software and share with us?
I have a Russian ROM and it does not have any VoiceDialing, but I would like to have one.
Nottz_Jay said:
Hi, i'm Jay i recieved my HTC Touch Pro 2 the other day and i've paired my Sony Ericsson bluetooth headset but i cannot get it to voice dial.
I've installed Vito Voice Dialer, set up the voice command but still no luck with the voice dialing.. Is there a particular headset i need to be able to voice dial or do i need a different programme?
I need the voice dial to work through the headset..
Thanks in advance
Click to expand...
Click to collapse
Voice dialing works great on the TMo version. Not as quick as before with my previous MDA. I say dial "XXX mobile" and it responds "dial XXX mobile" and I say yes and it calls. Also works for app launches etc.
Cyph
Does it work via Bluetooth Handsfree without pulling phone itself?
hecksk said:
Does it work via Bluetooth Handsfree without pulling phone itself?
Click to expand...
Click to collapse
Parrot ck3100 does, but I think it has the voice control software itselft...
I used to use aged SonyErricson T630 + HBH835, I had voice dialing with. But TP2 should be some kind of "PRO" ... well do you think it is impossible to activate this feature at all???
This is great news it is possible actually, but can you tell what kind of Bluetooth stack you have in your TP2? If I go to info dialog it says vesion 1.9.0 Build 4400, HCIv4.72/LMPv4.33031(15). What do you have in it?
thanks a lot.
anyone knows if cyberon voice commander works on TP2??
cyberpunk627 said:
anyone knows if cyberon voice commander works on TP2??
Click to expand...
Click to collapse
It works. But PTT function of bluetooth handsfree does not anyways.
thank you very much hecksk. it's the only software having italian TTS to read sms (useful when driving or - as it often happens to me - your hand are busy holding the work bag, jacket and so on). bluetooth ptt means that I can't use by headset to give commands, right? awful then... I hope that someone will come out with a solution soon... strange that such an important feature is missing on a businness device like this..
HTC support said, that they have no idea why bla-bla-bla, please contact handsfree manufacture (SonyErricson) and voice dialer (VITO).
It's funny answer seems like standard reply form. Sad.
Hope there is some solution for this issue...
So if I palnning to get a " Blueant Q1 " Bluetooth headset will it work with T-mo. TP2?
Anyone using Blueant Q1 ???
I upgraded to wm 6.5 to get my bluetooth fully functional.
Does it work via Bluetooth Handsfree without pulling phone itself?
Click to expand...
Click to collapse
Yes it does.
what version of bluetooth driver(stack) do you use for?
please describe how did you make it?
because mine TP2 does not work with SonyErricson HBH-IV835 handsfree, I used use it with SonyErricson phone and also checked with Nokia's...worked fine.
read this!!!
palah said:
Update... HTC tech informed yes MSVC is working correctly as tested on the TP2 units they use ... the 'Dopod' reference on post above referred to the brand of Headset not the dopod pda....
So voice activation via BT headset on MSVC works on some units not on others (depends on your rom) ... his advice... activate MSVC via the TP2 until a rom update... he said check weekly to see if one happens (so must be in pipeline) He also said Microsoft was working on MSVC as it does not play 100% with new Bluetooth Stacks so expect a new version (from v1.6) some time in future ... seems unless an industrious person finds a cab fix ... the only other option now, is find a rom that works and use that (which can bring other issues)
Click to expand...
Click to collapse
this post belongs to this thread: http://forum.xda-developers.com/showthread.php?t=554751&page=3
this looks super good, I'm so happy guys! Let's hope that it is all true, and not just smoke in our eyes