This morning I tried to up-grade my tytn ROM 1.20.161.5 (english) to RUU_Hermes_VF_IT_2.07.165.1_6275_1.32.00.00_108_Test.exe
I plugged USB cable to MAIN UsB port, i removed memory and sim card, above mentione program has been lunched.
tytn diplay becames multicolor, after that black and it desplaied up-grade status 0%
on my PC was appear ROM is not compatible with new up-date, please check software version (more or less) then I clicked FINISH
softare on PC was closed and TYT turned.
I unplugged USB from TYTN i tried to start on it withut success
SOFT reset
HARD reset with 2soft buttons "-" togheter soft reset
power on togheter OK and softe reset but my TYTN IS DEAD!!!
I tried to lunch mtty, but it does not find USB port, only COM1 and COM2 (on active sing I unsigned USB calbe, and second time I unistalled it)
My tytn is still dead!
what should i do?
thanks in advance Gionny
(I am sorry for my poor english)
I still waiting for your help!
My HERM 200 is dead
It does not work, display is fully black. I treid all reset available, (with stilus pen, stilus pen + Power on and OK; Stilus pen + soft keys "-"
without battery, with USB cable all above mentioned resets, without success.
when MTTY it start, it display me only COM1 and COM2 port not USB.
I already closed and disistalled ACTIVESYNC, but when I plug USB cable in HERM (TYTN) it does not work and PC does not find any USB device.
Please help me
Thanks again Gionny
Use this thread:
http://forum.xda-developers.com/showthread.php?t=286755
closing this one.
Related
heelo i have big problem i try to update my xda2 but when i start i disconect him from cabel when i start and now on screen i have serial on up and botom v1.06 and when i plug in charger or usb it is usb up and down v1.06 plees help me what i can do to fix this and how to do a hard reset ( meaby its help) i disconect him shortly apter start upgeated (somting about 1 sec) heelp plliss
The device is now in bootloader mode. You should put it in the cradle and start the normal upgrade procedure by running HimaupgradeUT.exe in the directory where also your ROM images are stored. Succes!
Hello,
after flashing many, many roms I am not able to flash any more roms....
The problem is: my bootloader stays in SERIAL mode and won't go in USB mode.
I had this problem somethimes before, but after some resetting(PPC and PC), swithing USB cable into antoher USB port after a while he did go into USB mode. But this time nothing works...I tried it manually(power button + ok button + soft reset) and with active sync...but nothing works for me.
I have tried searching the forum, found some articles mentioned it, but no solution.
Anybody else had this problem? My bet: it's a PC problem.....but don't know the solution
Info:
Herm300
IPL-1.04
SPL-2.10Olipro
Current rom: Pandora build 1825
<edit>
PC: Windows XP
tried 2 different USB cables
tried all USB ports
</edit>
Problem Solved !
Solution: reinstall active sync.....
1. Uninstall Activesync 4.5 from Control Panel | Add/Remove Programs
2. Reboot your PC
3. Check to make sure \Program Files\Microsoft Activesync no longer exists - delete it if it's still there.
4. Make sure your phone is NOT connected to your PC and re-install Activesync 4.5
5. Reboot your PC (sorry if this is a bit tedious )
6. Connect your phone directly to a USB port on your PC, NOT VIA A USB HUB!!!
7. Activesync should now detect your phone and start the "Create new partnetship" wizard.
Fine, when problems are solving itselfs, flashing time again, and again and...
The phone is HALTED on splash screen! I cant HW reset. Activesync no etablished conection with PC. Mtty.exe - can´t open USB port.
The only thing I can do is entering BOOTLOADER by pressing camera and power buttons.
ONBSL, SPL v. 1.005
Any solve, pleeeeeeease. Please help veri, veri much.
Hi! I tryed te fash my niki 200 with original rom! The flash is stopes to 42% and now i have boot mode with this message "Upgrade ROM code error! Please try again". I can not conect again to usb because i received message :"usb device not recognized". Mtty can not conect because i received the same message! There is another metod de make this device?
Have you flashed HardSPL?
Put your device into bootloader (hold b oth Camera and Power button while performing a Softreset via Stylus) and now you can theoretically flash your Provider ROM!
After that your device will work again!
I have not flashed hardspl! If i put the Niki in boot mode, show only "serial" on the screen with usb cable pluged and PC says "usb device not recocnized"!
Flashing in bootloader mode doesn't requires an ActiveSync connection so ignore it and start the ROM Upgrade! It's working, believe me! I've flashed my Niki with this method hundred of times!
I tryed to flash my niki in bootmood, but not working "error 260:conection"! My computer not recocnized my device (with or without activesync)!!!In bootmode on screen show "serial" and when i pluged the cable nothing happend (must see on screen:USB)! This is my problem!!! The computer does not alocate to my device a com port(USB). The same problem with MTTY (no USB poet detected). You understand me?
Maybe your USB drivers screwed up.
Trie with an other PC, this helped me one time.
I tryed on other computer with Xp and other with Vista! The same problem! Not recocnized!!!!!!!!!!!!!!!!!
bugytech said:
I tryed on other computer with Xp and other with Vista! The same problem! Not recocnized!!!!!!!!!!!!!!!!!
Click to expand...
Click to collapse
I've got the same issue. Did you resolve this? I would like to find a solution
I was trying to upgrade my device and then my PC stop working and reboot. Now My Qtek 2020 is showing Serial v1.02 (if not in cradle) and USB v1.02 (if in cradle) and I cannot perform an upgrade because HimaUpgradeUt doesn't detect the device. How can I revert this situation, is it possible?
More info needed:
Did you already begin to update your QteK? Did your PC say "updating" with a red progress bar and a percentage amount? If so, I think you would need to try and get that cable working again. Perhaps redownload the ROM (the installer may have become corrupted) and make sure that ActiveSync is switched OFF. Perhaps even reinstall ActiveSync if nothing else works. THe cable may also not be getting enough power. Try plugging it into the USB on the back of your computer if it is plugged into a USB Bus or the front USB port. THe back port will give you the most power. Also, make sure it is plugged in to the AC adapter while you upgrade just to make sure your phone doesn't go flat.
If you had not started upgrading it, try reseting your phone using the reset button with the stylus.
unbrick xda II
Hi, I've got the same issue................
Any hope?????????????