The phone is HALTED on splash screen! I cant HW reset. Activesync no etablished conection with PC. Mtty.exe - can´t open USB port.
The only thing I can do is entering BOOTLOADER by pressing camera and power buttons.
ONBSL, SPL v. 1.005
Any solve, pleeeeeeease. Please help veri, veri much.
Related
This morning I tried to up-grade my tytn ROM 1.20.161.5 (english) to RUU_Hermes_VF_IT_2.07.165.1_6275_1.32.00.00_108_Test.exe
I plugged USB cable to MAIN UsB port, i removed memory and sim card, above mentione program has been lunched.
tytn diplay becames multicolor, after that black and it desplaied up-grade status 0%
on my PC was appear ROM is not compatible with new up-date, please check software version (more or less) then I clicked FINISH
softare on PC was closed and TYT turned.
I unplugged USB from TYTN i tried to start on it withut success
SOFT reset
HARD reset with 2soft buttons "-" togheter soft reset
power on togheter OK and softe reset but my TYTN IS DEAD!!!
I tried to lunch mtty, but it does not find USB port, only COM1 and COM2 (on active sing I unsigned USB calbe, and second time I unistalled it)
My tytn is still dead!
what should i do?
thanks in advance Gionny
(I am sorry for my poor english)
I still waiting for your help!
My HERM 200 is dead
It does not work, display is fully black. I treid all reset available, (with stilus pen, stilus pen + Power on and OK; Stilus pen + soft keys "-"
without battery, with USB cable all above mentioned resets, without success.
when MTTY it start, it display me only COM1 and COM2 port not USB.
I already closed and disistalled ACTIVESYNC, but when I plug USB cable in HERM (TYTN) it does not work and PC does not find any USB device.
Please help me
Thanks again Gionny
Use this thread:
http://forum.xda-developers.com/showthread.php?t=286755
closing this one.
Yesterday, I update WM06 from WM05 on my Atom but it was not complete. Now when I press power button, phone appear "DSUU MODE" and nothing happen. If I open phone in bootloader mode, I can choose OS system and start phone normally. Now I can't up rom anymore because "ERROR: CONNECTION". Please help me.
"Plug in USB and re-enter the eboot"
I uprom WM06 for Atom Life from WM05, it stop and everytime I press power on screen appear "plug in USB and re-enter the eboot", phone can't start. How to solve this problem? Please help me!!
Hi,
Go to boot loader mode
Connect USB cable
Reflash ROM
Donot unplug USB cable until u see "Device Clean boot" message.
Thanks.,
I did it.
I did as you told. But My PC notice :"CONNECTION ERROR". Seem my phone didn't connet PC on bootloader. I try on 04 PC and the same result.
Can you copy the image file .nb0 to mini SD card and try bootloader
Image file *.nb0
Atom life rom don't have Image file *.nb0, It have exrom.img and flash.dio. I copy this two file to SD card and uprom from card. But it still broblem, power on, screen appear "DSUU Mode, plug in USB and re-enter the eboot".
May be remove the battery and wait for some time before you go for bootloader mode.
Thanks.
The Eboot?
How to re-enter the Eboot for my Atom Life?
Any Hope?...
if you press camera button and press reset hole using stylus.. atom should go into bootloader mode?..
No Hope!
Now can't enter bootloader. My Atom Life can't turn on, only black screen. DEAD!!
ironeagle said:
May be remove the battery and wait for some time before you go for bootloader mode.
Thanks.
Click to expand...
Click to collapse
have u follow #7 instruction,my atom ever happened like this,i remove battery for an hour,after put battery back , it can start to bootloader again
Maybe Atom Life is not the same Atom and Atom Exec.
I try a lot of time but no result. It still dead.
Any hope?...
Try to plug the USB cable to another USB slot or using a USB 2.0 hub. sometimes USB and USB cable having problem with connecting WinCE devices with WINXP.
Hi ;
i managed to enter the three color bootloader screen by pressing the camera button while restarting the device, then i ran the RUU_Prophet_220734_2207114_024721_NVID but it constantly gives me the error 260 (cannot connect to device).
now it dosen't conect to PC .i use Xp.
Thanks
Ya.. i also face the same problem..Can anyone help..only success flash just once
Within activesync disable connect through USB (Options->connection settings->Connect through USB), and try again.
HI!
I from russia)
HTC don't power on, in the boot mode activesync don't conect to him(((
helpme!
flash a new rom with bootloader screen without activesync
Thanks, but how to me to make it?
Prompt me please!
I shall be very grateful!
download this rom: http://rapidshare.de/files/38259115/RUU_Oxygen_1.5.401.2_R3_4.1.13.28_02.67.90_HTC_EUR_Test.exe.html
Then put your smartphone in bootloader
press (volume down button + photo button ) and then power button for 2 second
when appear a screen color red - green - blue connect usb and install rom downloaded from pc
excuse me for my english
Gives out (260 error)...
Active Sync thus was switched - off, mtty writes that can not open usb port (((
Help!
dont install with Mytt.
you must only enter in bootloader
connect usb to phone and to pc
(activesync NO active)
and install new ROM from exe downloaded.
try
Tried, it deduces error 260, and mytt I tried to connect already then, but unsuccessfully....
RESET pc and phone.
and try
you enter to boot loader?
reset made) some times, boot loader is included
But connection does not occur.
uuuhhmmm!!!
change USB PC port!!
i try with my oxy and work
I made all described above on 4 different PC result everywhere identical...
change USB PC port!!
i try with my oxy and work
Explain!
I have ugual problem, but i have flash in bootloader screen, without mytt, only connecting usb port and double clic to exe rom downloaded.
Hi! I tryed te fash my niki 200 with original rom! The flash is stopes to 42% and now i have boot mode with this message "Upgrade ROM code error! Please try again". I can not conect again to usb because i received message :"usb device not recognized". Mtty can not conect because i received the same message! There is another metod de make this device?
Have you flashed HardSPL?
Put your device into bootloader (hold b oth Camera and Power button while performing a Softreset via Stylus) and now you can theoretically flash your Provider ROM!
After that your device will work again!
I have not flashed hardspl! If i put the Niki in boot mode, show only "serial" on the screen with usb cable pluged and PC says "usb device not recocnized"!
Flashing in bootloader mode doesn't requires an ActiveSync connection so ignore it and start the ROM Upgrade! It's working, believe me! I've flashed my Niki with this method hundred of times!
I tryed to flash my niki in bootmood, but not working "error 260:conection"! My computer not recocnized my device (with or without activesync)!!!In bootmode on screen show "serial" and when i pluged the cable nothing happend (must see on screen:USB)! This is my problem!!! The computer does not alocate to my device a com port(USB). The same problem with MTTY (no USB poet detected). You understand me?
Maybe your USB drivers screwed up.
Trie with an other PC, this helped me one time.
I tryed on other computer with Xp and other with Vista! The same problem! Not recocnized!!!!!!!!!!!!!!!!!
bugytech said:
I tryed on other computer with Xp and other with Vista! The same problem! Not recocnized!!!!!!!!!!!!!!!!!
Click to expand...
Click to collapse
I've got the same issue. Did you resolve this? I would like to find a solution