Hi
when i turn on the device it shows (this is Orange-Israel device):
IPL: 2.16.0001
SPL: 2.16.0001
Radio: 02.07.10
OS: 2.16.9.1
and when i look at the device information, i get this:
rom ver: 2.16.9.1 wwe
radio ver: 02.07.10
protocol ver: 413.1.03
extrom ver: 2.16.9.101
I tried lokiwiz03a but it didn't work. after manually copying the two cabs to the phone this is the output that i got:
C:\>LokiwizMsl.bat
machinagod's HTC Wizard/Prophet/Charmer MSL Revealer v0.3
NOW WITHOUT CID Unlocking POWER!
ECHO is off.
Supports SPL 2.x!!
--------------------
WARNING: This tool is highly experimental!
I will NOT be held responsible for any problems caused by this tool.
--------------------
Thanks to xda-developers, spv-developers, and especially itsme by the work they
released. This solution would not be possible without them.
--------------------
Unlocking RAPI Please wait...
MachinaGod RapiUnlocker v1.0
Initializing.......................Done!
RAPI Unlocked.
Starting MSL work... DO NOT DISCONNECT UNTIL THIS SCRIPT ENDS
ECHO is off.
CopyTFFSToFile(0x0, 0x10000, lock_backup.bin)
ECHO is off.
ECHO is off.
SIMLock Code is your code... Type it with another SIM in...
--------------------
Lock Status: 0000000000000000
SIMLock Code: Qאm▒ך»BΘGφ2RW\↑►
This exe file was created with the evaluation version of Perl2Exe.
For more information visit http://www.indigostar.com
(The full version does not display this message with a 2 second delay.)
...
--------------------
"Standing on the shoulder of giants"
Ricardo Afonso, 2005
Press Any key to Exit.
Click to expand...
Click to collapse
The phone IS locked, i tried using it with a sim from another carrier (Cellcom) and needed to type an unlock code...
What is this strange simlock code?
What do i do with it?
Can anyone help?
Thanks,
Roy.
k
i have same k-jam but from other provider , cellcom.
rom - 2.16.9.1 wwe
date 2.6.06
radio 02.07.03
protocol 413.1.03
extrom 2.16.9.101
ipl 2.16
spl 2.16
gsm 02.07.10
os 2.16.9.1
i have tested all version of this unlock , thought phone stay locked.
other thing i have tested and found , if i remove the MULTILANG support (program make all menu to hebrew and add hebrew keyboard)
the phone will be unlocked!!!!
if i reacktive the program , it say sim is invalid.
any ideas ?
to yhe guy of the first post
you instaled the cet acb and the rapi cab??
for the second one as you post it your device is a g3 also you can unlock it via lokiwiz 2.b or do a downgrade 1.01 but verify if your device is g3
enjoy it
we cant unlock g4's...u have 2 pay 4 that...right?
you can unlock only sim if you want a cid unlocked you will pay of sim code is free anfter my mother g3 i had a g4 an i had unlockit very easy with lokiwiz3
So, lokiwiz3 is able to unlock the G4?
Tom
When the Lock Status shows only zeros it means that the lock bit is already removed and the phone is SIM (not CID) unlocked, thus the strange characters in the unlock code field
There should be no distinction between G3 and G4 regarding SIM (not CID) unlocking. The only thing that changed from earlier versions of lokiwiz is that when there were only G3 with IPL/SPL 1.xx the program would write an unlocked file to the phone instead of calculating the code to type.
mestrini said:
When the Lock Status shows only zeros it means that the lock bit is already removed and the phone is SIM (not CID) unlocked, thus the strange characters in the unlock code field
There should be no distinction between G3 and G4 regarding SIM (not CID) unlocking. The only thing that changed from earlier versions of lokiwiz is that when there were only G3 with IPL/SPL 1.xx the program would write an unlocked file to the phone instead of calculating the code to type.
Click to expand...
Click to collapse
yes u r right...i was thinking CID
how do i sim unlock mt htc wizard 200 i kant unlock it (srry for bad english)
alexwittmann said:
how do i sim unlock mt htc wizard 200 i kant unlock it (srry for bad english)
Click to expand...
Click to collapse
maybe with HTC Uni SIMUnlock you can do it , and you can find it in http://rapidshare.com/files/23944709/HTC_Uni_SIM_Unlock_v1.rar....
Related
This is a patched radio ROM that can be used to remove the Operator SIM lock and CID lock from HTC Hermes based telephones.
It can be used in all HTC Hermes devices, the only restriction is that the device must have bootloader version 1.04
Warning:
If you run this upgrade on any other device than HTC Hermes, you will most probably render it DEAD!
Disclaimer:
This is free to use but at your own risk, I take no responsiblity for any conflict, fault, or damage caused to your phone by this unlocking procedure. It may invalidate your warranty.
Full caution is advised.
Website:
http://pof.eslack.org/hermes-unlocker/
Install Instructions:
Enter bootloader mode on your Phone. To do this, simultaneously hold side OK and POWER buttons together and reset with stylus.
[You should see SPL-1.04 on the top of the tri-color screen, if you see SPL-1.06 you'll need to downgrade the bootloader]
Connect your phone to your computer using the USB lead.
Run the MaUpgradeUt_noID.exe program – this will reflash your phone with a patched radio ROM required to unlock.
Wait patiently.
Once the MaUpgradeUt_noID.exe upgrade completes, it will end up saying "Upgrade Error 114", but the patched radio ROM will be flashed anyway, dont worry about that error!
Soft reset with stylus (Device will not be hard reset and no data will be lost)
Allow your phone to reboot. Once it has, connect to your PC using Activesync, and copy the HERM_Unlock_v2a.exe program onto your phone. Alternatively, copy it to an SD card and insert into your phone.
Run HERM_Unlock_v2a.exe on your phone. Wait about 1 minute.
You should see a "SUCCESS!" message from HERM_Unlock_v2a.exe, after that soft reset your phone.
Process is (hopefully) complete!
If the phone requests unlock code when you put a locked SIM, the code is: 22051978.
Frequently Asked Questions:
Q - How do I know my bootloader version?
A - When you are on the tri-color screen check the number after SPL-X.XX
Q - How do I downgrade to bootloader 1.04?
A - See this comment. I'm working on an altnative method for all devices, but it's not ready yet.
Q - What is the CID and how do I check which one I have?
A - See this comment.
Donations:
I spent some time and money developing this free unlocker, there's no need to pay me for that, but donations are always appreciated. You can find a paypal button to donate on the unlocker website.
Thanks to:
buzz_lightyear, itsme, vijay555, arc, Asukal, machinagod - for the wise advice and support
everyone else in xda-developers.com
History:
v2a [14-11-2006] - bugfix release, thanks to all who reported the problems!
(hopefully) fixed bug where unlock code has to be entered manually
(hopefully) fixed bug where SuperCID was not kept after rom upgrades in some cases
v2 [12-11-2006] - updated to patched radio 1.16
unlocking software provided (HERM_Unlock_v2.exe): thanks buzz for the source of UNI_Unlock_v1 ;-)
SuperCID is now kept after rom upgrades
v1 [05-11-2006] - patched radio 1.13
unlock manually
Notes:
- v2a makes SuperCID sticky after ROM upgrades, those who used v1 or v2 and are still running the patched radio only need to run HERM_Unlock_v2a.exe on the device to keep SuperCID forever.
Download:
HTC_Hermes_SIM_Unlock_v2a.zip
Enjoy!
Sweet
First to say thank you from everybody.
Hi
I´ve finaly unlocked my german MDA Vario II with your patched ROM and it works !!!
Thank you pof, you´ve done a very hard job perfectly !
Scorpio16v
scorpio16v said:
Hi
I´ve finaly unlocked my german MDA Vario II with your patched ROM and it works !!!
Click to expand...
Click to collapse
Glad to hear it worked
Just want to add my thanks and congratulations. Superb work.
Totallytechie
will this working on softbank X01HT?
Great job!!
Dear POF
first of all congratulation you finish your great job
just short term.
Now I could my X01HT from SOFTBANK JP SIM network
unlocked successfully.
please keep it up your engineering skill.
best regards,
Dear jarodcn
As I mentioned above I succeed to unlock my X01HT perfectory
by using master POF's solution.
1. down grade bootloader 1.06 to 1.04.
2. then provide POF's method as described in this thread.
all procedures clearly mentioned in his former thread and comment.
Great to see that it is finaly done !
You did an amazing work there! As my device is already unlocked I cannot test, but I am pretty sure that it works flawlessly ;-)
Will this work on T-mobile Vario II
Or is it for HTC devices/ Roms only?
Should work on all Hermes, definately works on Vario II with Dopod Rom.
mikeycollins13 said:
Or is it for HTC devices/ Roms only?
Click to expand...
Click to collapse
You can belive, it works with the MDA Vario II. It should work with all devices of the "HERMES" class.
God job! and how to downgrade bootloader
Hello pof,
I can downgrade bootloader from 1.06 to 1.04 without Radio patch.
Using files:
1) HERMIMG_IPL1.01_SPL1.04_ONLY.nbh ( Special thanks to pof.)
Get this file from xda-forum ftp-site.
ftp://xda:[email protected]/Hermes/Technical/unlocker-reversed.zip
2) EnterBL.exe, GetDeviceData.exe, ROMUpgradeUt.exe, RUU.dll, RUUUI.dll
Get these files from any Shipped_Complete_Updates.
( Run Updates and getting files from temporary folder.)
3) All files in the same folder.
How to:
1) Conect Hermes to your PC
2) Run M3100v3cUnlock.exe without key-file ( no need payment.)
3) When key-file required, close the M3100v3cUnlock window.
4) Run ROMUpgradeUt.exe
Caution:
It's only bootloader downgrade. When anybody get error with
Free SIM unlocker and bootloader 1.06, you can try this method
before unlocking.
riki0081 from Japan.
Hi,
tried to unlock my T-Mobile Vario II from UK, but the unlock code was wrong...further after I run MaUpgradeUt_noID.exe another error than the one described appeared (forgot which one it was)...can anyone help? Did I do something wrong?
Confirm this solution.
http://forum.xda-developers.com/showthread.php?t=281617
I can downgrade bootloader from 1.06 to 1.04 without Radio patch.
Using files:
1) HERMIMG_IPL1.01_SPL1.04_ONLY.nbh ( Special thanks to pof.)
Get this file from xda-forum ftp-site.
ftp://xda:[email protected]
2) EnterBL.exe, GetDeviceData.exe, ROMUpgradeUt.exe, RUU.dll, RUUUI.dll
Get these files from any Shipped_Complete_Updates.
( Run Updates and getting files from temporary folder.)
3) All files in the same folder.
How to:
1) Conect Hermes to your PC
2) Run M3100v3cUnlock.exe without key-file ( no need payment.)
3) When key-file required, close the M3100v3cUnlock window.
4) Run ROMUpgradeUt.exe
Caution:
It's only bootloader downgrade. When anybody get error with
Free SIM unlocker and bootloader 1.06, you can try this method
before unlocking.
riki0081 from Japan.
Click to expand...
Click to collapse
I succeeded with first solution for downgrading bootloader 1.06 to 1.04
but worry about sim lock , so I use this solution to unlock sim lock and succeed.
thanks POF for your kindness.
Damn pof .. this is crazy .. YOU ROCK!!!
Why is the unlocker tied to the RadioROM upgrade? Anyway you can make the unlocker available by itself?
Vodafone Spain
Hi All
Thanks POF for your hard work here. Question: I have an original Vodafone Spain 1605, I haven't made any Rom/Radio Update, how should I proceed?
My HTC info:
Rom Version: 1.20.164.3
Radio Version: 1.03.06.00
Protocol Version: 32.34.7010.01W
I don't understand if I need to update my Radio version first or just follow your process.
Thanks very mcuh
Excellent - congratulations!
Nice work pof! Hermes=OWN3D!
I am flashing right now and will post results. I am on Dutch T-Mobile Vario II with original shipped ROM (Dutch)
I am getting exited
Does this mean that if we keep this patched radio then we always are going to have an Super CID device ?? That basically means replacing the included Radio.nbf with this patched one on any ROM package Or am I missing something ?
Also is this a stable ROM. My VARIO II has/had 1.05.02 ?
This is Hard-SPL for the G4; flashing procedure is essentially the same as G3 although do make sure that the filesize you flash is 0xC0000 rather than the 1MB that people flash for a G3.
Cheers!
PS: while this has been tested and is known to work, I do not actually own a Wizard and so am relatively limited in the help I can offer with regard to issues you may have getting your device working or whatever
Great job Olipro! Stickied.
Damn nice! One step closer to a real cid-unlock You are great!
Olipro said:
This is Hard-SPL for the G4; flashing procedure is essentially the same as G3 although do make sure that the filesize you flash is 0xC0000 rather than the 1MB that people flash for a G3.
Cheers!
PS: while this has been tested and is known to work, I do not actually own a Wizard and so am relatively limited in the help I can offer with regard to issues you may have getting your device working or whatever
Click to expand...
Click to collapse
sorry 2 sound like a noob
i've been using the uni
just bought a used g4 wizard..
how do v use this.????
how's this different from
http://forum.xda-developers.com/showthread.php?t=332320
frz said:
sorry 2 sound like a noob
i've been using the uni
just bought a used g4 wizard..
how do v use this.????
how's this different from
http://forum.xda-developers.com/showthread.php?t=332320
Click to expand...
Click to collapse
This is one is the patched SPL file alone (the original). The other is the 'spoon feed' version meaning you just need to run a file once and all the job is done nice and easily...
PS:
One thing i find hard to understand is why this thread was made sticky a few minutes after being posted and the other two from The Equinox (sSPL and HardSPL), who are meant to be easy to handle and error proof for noobs weren't, even though they have proven to be of great help and acceptance.
Are we here for the good of all or is the status quo a relevant issue? (off the chest...sorry)
Can I flash this file in bootloader mode ??
My Wizzard is freezing on splashscreen and it's work only in bootloader mode. Is there any way to flash this file ??
It's the only rescue for my Wizzard.
chrzanek said:
Can I flash this file in bootloader mode ??
My Wizzard is freezing on splashscreen and it's work only in bootloader mode. Is there any way to flash this file ??
It's the only rescue for my Wizzard.
Click to expand...
Click to collapse
You can but you must first build a nk.nb file with it and also flash via RUU
wow thanks....it's just sad that i don't know how i can help....
mestrini said:
You can but you must first build a nk.nb file with it and also flash via RUU
Click to expand...
Click to collapse
Thanks I did this, but it does't help to me i still have:
Cmd>r2sd os
***** user area size = 0xF300000 Bytes
R2SDBackup() - Download type = 3
usTotalBlock = 1 sizeof(SDCARD_SIGNATRUE_TABLE)=512
You didn't get the proper security level to download a specific image
when i'm trying to copy OS to sd card ( i have format failed when i'm trying HR )
So the only way is imei-check
You can use this topic(if your device is G3)
http://forum.xda-developers.com/showthread.php?t=307332&page=4
1. flash Prophet cooked rom -> you can Hardreset
2. flash shiprom then unlock
i saved my G3 like that
RClub said:
You can use this topic(if your device is G3)
http://forum.xda-developers.com/showthread.php?t=307332&page=4
1. flash Prophet cooked rom -> you can Hardreset
2. flash shiprom then unlock
i saved my G3 like that
Click to expand...
Click to collapse
unfortunately it's G4. But thanks.
Hard-SPL not working at all on my WIZ (T-Mobile MDA VARIO US G4) CID unlock impossible! Anybody an idea how to get it unlocked?
The spl flashing works fine and it even shows the olip spl when rebooting the wiz but afterwards everything remains the same - can't flash other roms!
Junner2003 said:
Hard-SPL not working at all on my WIZ (T-Mobile MDA VARIO US G4) CID unlock impossible! Anybody an idea how to get it unlocked?
The spl flashing works fine and it even shows the olip spl when rebooting the wiz but afterwards everything remains the same - can't flash other roms!
Click to expand...
Click to collapse
Have you tried the Mun RUU in the Hard SPL posted in TS of the Hard SPL thread?
How does the Soft SPL work?
is it possible to use it even with my SPL? (see signature)
cheers
irm
I have an extra 8125 laying around so I thought I would play with it. I applied your update and I am going to assume I can upgrade the 8125 to WM6 as long as the IPL and SPL doesnt change. I have looked at some other post on this site and there seems to be options in wich you can upgrade the IPL/SPL and still CID and SIM unlock the 8125. At the present with the solution from this thread I have the 8125 Sim unlocked.
total noob here
Olipro said:
This is Hard-SPL for the G4; flashing procedure is essentially the same as G3 although do make sure that the filesize you flash is 0xC0000 rather than the 1MB that people flash for a G3.
Cheers!
PS: while this has been tested and is known to work, I do not actually own a Wizard and so am relatively limited in the help I can offer with regard to issues you may have getting your device working or whatever
Click to expand...
Click to collapse
i know my device is a G4 so am in the right place, but what exactly do i do with this file?
How to upgrade a unlocked HTC Wizard
Hi
I have a used Qtek 9100 with preinstalled NBD 9.3 ( Do not know who did it? ). I know it is a G4 and it may be CID Unlocked. I wanted to flash a new or another ROM so what should I do.
What is the HardSPL and SoftSPL, do I need to use these to flash new rom to my mobile.
I have installed/checked the Wizard Service Tool v4.2.2. These are the info..
--------------------------------------------------------------------
CPU: Texas Instruments - OMAP850
MODEL: Wizard
IMEI: 356384008852681
=> Bootloaders:
IPL: 2.17.0001 (G4 device)
SPL: 2.17.0001 (G4 device)
Built on Feb 10 2006 at 11:55:14
Copyright (c) 2003 High Tech Computer Corporation
=> Firmware:
OS: 5.2.xxx (Build 18125.0.4.2)
ROM: 0.0
Registry AKU: .0.4.2
Radio: 02.07.1ò
Protocol: P413.1.03
=>Extended_ROM:
Version: Unknown
Name: Extended_ROM
Status: hidden
=> Drives and partitions:
|--Handle--|---Size---|
4fb80df6 - 19.00k (0x4c00)
ee9ce08e - 9.99M (0x9fd800)
ceadaa12 - 43.24M (0x2b3e000)
eeb28aa2 - 50.88M (0x32e0000)
eeb287ee - 3.00M (0x300000)
0eb2879a - 3.06M (0x30fc00)
=> DOC chip unique ID:
00000000fd23020138300e891503067f
Key Index: 2
------------------------------------------------------------
Please guide me.
At last, BT icon is disabled in taskbar. How to enable it? Please help....
Many Thanks
Srikanth.K
ksrikanth said:
Hi
I have a used Qtek 9100 with preinstalled NBD 9.3 ( Do not know who did it? ). I know it is a G4 and it may be CID Unlocked. I wanted to flash a new or another ROM so what should I do.
What is the HardSPL and SoftSPL, do I need to use these to flash new rom to my mobile.
I have installed/checked the Wizard Service Tool v4.2.2. These are the info..
--------------------------------------------------------------------
CPU: Texas Instruments - OMAP850
MODEL: Wizard
IMEI: 356384008852681
=> Bootloaders:
IPL: 2.17.0001 (G4 device)
SPL: 2.17.0001 (G4 device)
Built on Feb 10 2006 at 11:55:14
Copyright (c) 2003 High Tech Computer Corporation
=> Firmware:
OS: 5.2.xxx (Build 18125.0.4.2)
ROM: 0.0
Registry AKU: .0.4.2
Radio: 02.07.1ò
Protocol: P413.1.03
=>Extended_ROM:
Version: Unknown
Name: Extended_ROM
Status: hidden
=> Drives and partitions:
|--Handle--|---Size---|
4fb80df6 - 19.00k (0x4c00)
ee9ce08e - 9.99M (0x9fd800)
ceadaa12 - 43.24M (0x2b3e000)
eeb28aa2 - 50.88M (0x32e0000)
eeb287ee - 3.00M (0x300000)
0eb2879a - 3.06M (0x30fc00)
=> DOC chip unique ID:
00000000fd23020138300e891503067f
Key Index: 2
------------------------------------------------------------
Please guide me.
At last, BT icon is disabled in taskbar. How to enable it? Please help....
Many Thanks
Srikanth.K
Click to expand...
Click to collapse
With IPL/SPL 2.17.0001 and running NBD 9 series,which is a wm6 rom,it must have be upgraded through 'SoftSPL' method,now you can change the rom either with SoftSPL or if you want to get your phone semi-CID unlocked,you can apply 'HardSPL',it'll flash patched IPL/SPL to make it semi-CID unlocked,remember,a G4 device cannot be permanantly CID unlocked like a G3 phone,but you'll be able to flash any wm6 or 6.1 rom easily with HardSPL.
HardSPL method is done only once and after that you can flash and change rom easily,where as,with SoftSPL,you'll have to do the Flash every time through SoftSPL,but it doesn't change the original Bootloaders (IPL/SPL).
The choice is your !
How to upgrade my i-mate K-JAM? please help me
ipl 2.21.0001
spl 2.21.0lip
gsm 02.25.11
os 10.1.0.811
I am not sure what all that means, but i have successful unlocked many mdas. I bought a 8125 of craigslist that was supposively unlocked but when i have a t-mobile sim card inserted it asks for a lock code. I know the phone has mobile 6 cooked my mfrazz. I am not sure what the heck is going on with this phone but I have read and tried every unlocker i could find, even off of ebay and i am very frustrated now... please help me!!!! I cant live without my wizard!!!!!!!!!
duceirae said:
ipl 2.21.0001
spl 2.21.0lip
gsm 02.25.11
os 10.1.0.811
I am not sure what all that means, but i have successful unlocked many mdas. I bought a 8125 of craigslist that was supposively unlocked but when i have a t-mobile sim card inserted it asks for a lock code. I know the phone has mobile 6 cooked my mfrazz. I am not sure what the heck is going on with this phone but I have read and tried every unlocker i could find, even off of ebay and i am very frustrated now... please help me!!!! I cant live without my wizard!!!!!!!!!
Click to expand...
Click to collapse
ipl 2.21.0001
spl 2.21.0lip
gsm 02.25.11
os 10.1.0.811
Well,it seems from the look of it that,although it is 'HardSPL' and upgraded to wm6, but before doing 'HardSPL',the phone was not SIM unlocked,only HardSPL and upgraded to wm6.
Ok,try to generate SIM unlock code through lokiwiz03a,hope it'll work. Otherwise,you might have to remove 'HardSPL' revert to official rom and apply lokiwiz03a.Then HardSPL and upgrade to wm6.
Cheers!
I was trying to sim unlock my friend softbank X01HT
so i was running the greatest pof unlocker v3
and it was successful (unlock cid and sim)
but after a reset the X01HT showing USIM window
and asked to input a code.
in the faq,pof suggest to update the rom to english one or to use the uk unlocker until it ask for unl files. so take the second suggestion and use the uk unlocker.
the usim are not showing anymore but my signal are not showing also.
only a ! icon in my signal bar
already tried to using the unlocker a couple times and the result it the same
and pof say maybe your device was pre april and it cannot be unlocked for a moment
and pof say to use mtty to check the bootloader radio version.
so help me answer this question please
1. why in mtty are not showing "usb>>" but only "cmd"
i tried to type "rtask a" but its say command error. i already disable the usb in active sync and connect to usb in mtty. tried also in another comp but still not showing the "usb>>" after i click enter twice.
2. is there any other method to check my x01ht was have the protection unlock or not ??
thx
the spec are here
X01HT HERM200
Black
IPL-1.01
SPL 1.40.Olipro (i upgraded it to 2.10.Olipro)
M 05,S 04,B 06, D. 1.33,
R 1.14.01.10,
G 32.50.7018.00H
Read the past forums about post April X01HT
Can you read some past forums about X01HT, post april so you can understand how to unlock it,so in your case, 1.14.01.10 radio is not possible yet to sim-unlock, but my friend here transfer the old hermes (X01HT signal IC) to the not unlockable one, it is a success after sim unlock it, the problem is where to get some hardware (Signal IC's) for X01HT.
Good Luck, try the hardware radio transfer then unlock.
HTC Herald Unlock
if you live in Bali - Indonesia you can bring it to me. but sorry its not free...
dvaiyo said:
if you live in Bali - Indonesia you can bring it to me. but sorry its not free...
Click to expand...
Click to collapse
i live in bali where you honey.... hehehe
I must be thick as I have read more posts on this than I have had hot dinners and tried various utilities all to no avail although thankfully my Wizard still seems to work.
My O2 XDA-Mini s is about 2 years old and of course locked to O2 although the device come up as SIM Unlocked but CID Locked.
IPL - 2.21.0001
SPL - 2.21.0001
I am now on the Three network and would just like to get back to using the phone I love rather than the freebie I have now, so I am assuming I need to get CID Unlocked?
Having bothered to get to that stage I would want to scrap the O2 software and upgrade to a better ROM.
Sorry for being so stupid on this, I am hoping someone in the know can take the time to reply.
Thanks in advance
If it's sim unlocked you don't need to CID unlock to enable other sims.
If your new sim is rejected, then the device is still sim locked.
CID is only used for flashing, so if you want to upgrade to the better WM6 roms now available, you'd have to unlock it permanently (hard SPL) or use the Soft SPL.
Good luck,
EquinoXe
the-equinoxe said:
If it's sim unlocked you don't need to CID unlock to enable other sims.
If your new sim is rejected, then the device is still sim locked.
EquinoXe
Click to expand...
Click to collapse
Thanks for taking time to reply EquinoXe, you have confirmed what I had already thought.
The device reports "Invalid or missing SIM card" with the Three SIM card and WST v4.2.2 reports "Your phone is already SIM unlocked" ??
I do wan't to upgrade the ROM but more importantly I want to get the thing working with the Three SIM card, then I can worry about the ROM.
Any other suggestions will be gladly received.
Thanks in Advance
Download and use the LOLKWIZ03b program from these forums, follow the insturctions EXACTLY, and it will generate you a SIM unlock code.....enjoy!
ashasaur said:
Download and use the LOLKWIZ03b program from these forums, follow the insturctions EXACTLY, and it will generate you a SIM unlock code.....enjoy!
Click to expand...
Click to collapse
I have done this twice just recently but my G4 is not asking me to enter any unlock code. I read other threads where people had similar problems so tried a few times, device still comes up "Invalid or missing SIM card"
I ran EnableRapi from the device before running the batch file so I'm not sure what is going on or if it is something quirky about the G4 device??
Microsoft Windows XP [Version 5.1.2600]
(C) Copyright 1985-2001 Microsoft Corp.
C:\Documents and Settings\Jackson>cd\
C:\>lokiwizmsl
machinagod's HTC Wizard/Prophet/Charmer MSL Revealer v0.3
NOW WITHOUT CID Unlocking POWER!
ECHO is off.
Supports SPL 2.x!!
--------------------
WARNING: This tool is highly experimental!
I will NOT be held responsible for any problems caused by this tool.
--------------------
Thanks to xda-developers, spv-developers, and especially itsme by the work they
released. This solution would not be possible without them.
--------------------
Unlocking RAPI Please wait...
MachinaGod RapiUnlocker v1.0
Initializing.......................Done!
RAPI Unlocked.
Starting MSL work... DO NOT DISCONNECT UNTIL THIS SCRIPT ENDS
ECHO is off.
CopyTFFSToFile(0x0, 0x10000, lock_backup.bin)
ECHO is off.
ECHO is off.
SIMLock Code is your code... Type it with another SIM in...
--------------------
Lock Status: 0000000000000000
SIMLock Code: ¨~äe├ÇÔ►-┴«p¦╚.;
This exe file was created with the evaluation version of Perl2Exe.
For more information visit http://www.indigostar.com
(The full version does not display this message with a 2 second delay.)
...
--------------------
"Standing on the shoulder of giants"
Ricardo Afonso, 2005
Press Any key to Exit.
Strange, according to lokiwiz (and WST) you are sim- unlocked.
But clearly your three sim card won't be accepted.
I do remember that HTC had been messing with the bootloaders, had to downgrade one in order to unlock it too..
Could you Flash a 2.19.0001 (or earlier G4) IPL/SPL ROM and try again?
You can use dharvey4651's thread as a guide to flash the IPL/SPL.
Just ignore the carrier ROMs, and only update (downgrade) the IPL/SPL with one attached to djharvey's thread (preferably the orange, because that one worked for me).
Flashing bootloaders can damage your device beyond repair, please use this method only if you are shure about the process, and know what you are doing. I am not responseble or liable for any damages.
Flash the IPL/SPL (takes a minute), then try again to unlock the phone.
Note: WM6.x needs IPL/SPL 2.19.xxxxx at least (works great with a 2.19), so if you have downgraded to a lower number, you'd have to upgrade again in order to run WM6.x .
Good luck,
EquinoXe
Same Problem
I have the same problem as the previous post. I downgraded from WM6.1 to a WM5.1 ROM and then ran lokiwiz - success!
I have now gone back to the original WM6.1 ROM and again I am locked out from my o2 SIM.
I am using: WM6.1 ROM Prophet My Green Edition http://forum.xda-developers.com/showthread.php?p=2116170
Any suggestions?
IPL 2.10.001
SPL 2.G4.4PDA
GSM 02.47.21
OS 5.2.19.209
the-equinoxe said:
Could you Flash a 2.19.0001 (or earlier G4) IPL/SPL ROM and try again?
You can use dharvey4651's thread as a guide to flash the IPL/SPL.
EquinoXe
Click to expand...
Click to collapse
Thanks EquinoXe, I am going to try a T-Mobile, Vodaphone and Orange SIM later to see what results then maybe tomorrow try your last suggestion.
Thanks and I will post any results, hopefully not a flashy paperweight (~:
------------------------------
I have now tried T-Mobile, Vodaphone and Orange SIM cards in the Wizard and all work OK so unlocking was never the problem, obviously O2 is OK also as this was it's original branding.
So the problem is only with the Three SIM, I have an old T610 and T630 which I just put the Three SIM into with the same results.
Need to do a bit more reading on this but I thought this sort of restrictive trading practice went out with the monopolies issues, as it seems at the end of my contract it's not just a matter of me buying a phone of my choice, if I want a new handset I have to go with Three, who interestingly don't do XDA style phones, or change contracts.
More if it happens.
I'm guessing that the reason the 3 sim card won't work is because the Mini S isn't a 3G capable device - 3 is the only network in the UK that's 3G exclusive, hense why other (T-mobile, Vodafone, O2 and Orange) sims will work and the 3 sim card won't.
Hope this helps.