I'm new on all of this phone "hacking"/developing, but something .. bad.. happened to the phone I was trying to run WM2005!
ftp://ftp.vobis.ru/pub/qtek/HU_BP_RUS_101577_13234_1410_ship.exe
I was running this, it made the 3 colours, started at 0% and then I went to the kitchen for a glass of water.. when I came back it was doing the "Succesfull update!" screen, but my phone won't boot?
Any help will be GREATLY (Caps lock, big letters) appreciated!
Related
guys i dropped my hd2 the screen did not crack but it is showing yelow patches.i mean the clouds are yellow too.when i flex my phone the colour comes back to normal.i gave my phone to the htc repair center they said my motherboard/mainboard's socket has a problem and needs a replacement which is very expensive.After it fell when i keep the phone in my pocket and when i remove it after a while to use it,it does not wake up and i have to pul out the batery and restart it.Now my question is can it realy be the mainboard isue?or its my screen malfunctioning?i have a doubt on this.please help.
arzin said:
guys i dropped my hd2 the screen did not crack but it is showing yelow patches.i mean the clouds are yellow too.when i flex my phone the colour comes back to normal.i gave my phone to the htc repair center they said my motherboard/mainboard's socket has a problem and needs a replacement which is very expensive.After it fell when i keep the phone in my pocket and when i remove it after a while to use it,it does not wake up and i have to pul out the batery and restart it.Now my question is can it realy be the mainboard isue?or its my screen malfunctioning?i have a doubt on this.please help.
Click to expand...
Click to collapse
I got the same.
I dropped it twice, now my screen is f*cked.
When I bent it a little bit it goes back to normal.
I'm waiting for a fully backup program for all my apps/sms/photo's/etc before I want to give it to a repair center. Want to make it so dat I never dropped it and the screen just suddenly started to act very strange. Hope it will fall under warranty
Do you perhaps know a full backup program?
(something like you also use on a normal pc like making a ghost image, and when the phone returns you can load the image and everything is back to normal including your own apps/photo's/sms etc...)
TimvdM said:
I got the same.
I dropped it twice, now my screen is f*cked.
When I bent it a little bit it goes back to normal.
I'm waiting for a fully backup program for all my apps/sms/photo's/etc before I want to give it to a repair center. Want to make it so dat I never dropped it and the screen just suddenly started to act very strange. Hope it will fall under warranty
Do you perhaps know a full backup program?
(something like you also use on a normal pc like making a ghost image, and when the phone returns you can load the image and everything is back to normal including your own apps/photo's/sms etc...)
Click to expand...
Click to collapse
Yea use sprite backup program.changng mainboard is costing 190dolars
MY screen backlight will not turn off. It goes from dim to bright, every few seconds. I cannot get it to turn completely off either, when i hit the endcall key the screen goes black then it comes right back on by itslef. I have no programs running in the background. I have soft reset the phone, even taking the battery out. The screen goes off fine while charging. I have also tried cleanRAM on level 3, with no sucess. I dont have any special ROM, just CHT2 and various mods. Any help please!
I know you probably do not want to hear this, but if you have checked your display settings and the are all good. Then it is probably time for a hard reset.
yea, i was starting to mentally prepare for that now. the problem is seeming to "chill out" alittle. its not doing it as bad as it was yesterday. i thought it fixed itself for awhile today, then it started doing it again. it drains my battery so fast when that happens. its like a pulsing from dim to bright until i push any button or on the screen. thanks for your help. if you think of anything else let me know.
same problem
Hi!
I have a same problem!!!! I am using energy rom...But I think it does not matters. I already did hard reset and it didnt help!!!! And there is nothing wrong with buttons, becouse, when I push them they normally light up, but in this process u described( totally same in my phone ) Thew display just go bach to light, but lights on buttons not...So there isnt problem with bad connection or so.... I am really in **** with this And it wont be better man believe me...Got it almost week...sometimes its better but..... ANYONE PLS HELP!!!
airhuri said:
Hi!
I have a same problem!!!! I am using energy rom...But I think it does not matters. I already did hard reset and it didnt help!!!! And there is nothing wrong with buttons, becouse, when I push them they normally light up, but in this process u described( totally same in my phone ) Thew display just go bach to light, but lights on buttons not...So there isnt problem with bad connection or so.... I am really in **** with this And it wont be better man believe me...Got it almost week...sometimes its better but..... ANYONE PLS HELP!!!
Click to expand...
Click to collapse
If a hard reset didn't help you, then you have a hardware issue for sure.
i've noticed on mine, if it starts acting up. I put it on the charger for a sec. then it acts normal after i disconnect it. Do you think this could be from water damage? I havent gotten any water on my phone that i know of, though.
tippingvan said:
i've noticed on mine, if it starts acting up. I put it on the charger for a sec. then it acts normal after i disconnect it. Do you think this could be from water damage? I havent gotten any water on my phone that i know of, though.
Click to expand...
Click to collapse
Kinda sounds like you may not be getting correct voltage to your screen or out of your battery. I say this cause you mentioned plugging in your charger helps for a little while. Have you had a good look at your battery pins on your HD2?
There is nothing wrong with pins...Today my phone work better....But still sometimes keep screen on...what a mystery...
did a hard reset, nothing changed. called tmobile, got a replacement coming, no charge. guess thats the only way.
tippingvan said:
did a hard reset, nothing changed. called tmobile, got a replacement coming, no charge. guess thats the only way.
Click to expand...
Click to collapse
So, that sounds like a HW problem, lucky enough to get free replacement
unfortuntly it wont work for me (( Cause i did HSPL and stuff..... But I noticed, that sometimes when i start to charge my phone it actually gets better for some time... Any thoughts?
Or can u pls ask the t-mobile for me where was the prolem in your phone? Thanks..
airhuri said:
unfortuntly it wont work for me (( Cause i did HSPL and stuff..... But I noticed, that sometimes when i start to charge my phone it actually gets better for some time... Any thoughts?
Or can u pls ask the t-mobile for me where was the prolem in your phone? Thanks..
Click to expand...
Click to collapse
You can remove HSPL and revert it back to SPL by using the HSPL utility, remember it asked which version you want to install. Just click on the link in my sig for HSPL. and download it. Then rum the utility and select the correct SPL version for your current ROM.
Or flash the stock ROM for your HD2 via SD card. Go to the link below to learn how.
http://forum.xda-developers.com/showthread.php?t=681317
i have a problem where my screen doesn't work and only a white screen shows up.
So I can't see the viewsonic birds or the picture when the tablet boots up or anything.
even going into CWM only shows the white screen.
I had the problem before but it went away when setCPU force closed. so I thought it was because the tablet didn't like being overclocked.
but now the problem has come up again.
I tried to go into CWM and do a restore by guessing the number of times to scroll down to "restore" and stuff, but that's almost impossible going blind like that.
Does anyone else have this problem?
and even better yet, does anyone else have a solution?
I've even tried to NVflash it, thinking it may go back to the original kernel and fix the screen, but that didn't do it either (actually only put me in a boot loop: which goes from white screen to dark screen and back to white screen. I figure the bootloop is because I was on bootloader 1.2 and nvflashed a 1.1 accidentally).
So any help would be greatly appreciated!
themsn said:
i have a problem where my screen doesn't work and only a white screen shows up.
So I can't see the viewsonic birds or the picture when the tablet boots up or anything.
even going into CWM only shows the white screen.
I had the problem before but it went away when setCPU force closed. so I thought it was because the tablet didn't like being overclocked.
but now the problem has come up again.
I tried to go into CWM and do a restore by guessing the number of times to scroll down to "restore" and stuff, but that's almost impossible going blind like that.
Does anyone else have this problem?
and even better yet, does anyone else have a solution?
I've even tried to NVflash it, thinking it may go back to the original kernel and fix the screen, but that didn't do it either (actually only put me in a boot loop: which goes from white screen to dark screen and back to white screen. I figure the bootloop is because I was on bootloader 1.2 and nvflashed a 1.1 accidentally).
So any help would be greatly appreciated!
Click to expand...
Click to collapse
Normally caused by a loose video cable inside the tablet. Did you drop or jar the tablet? Try lightly tapping corner to see it changes, otherwise you would have to open the tab & reconnect. See theses posts http://forum.xda-developers.com/showpost.php?p=12254692&postcount=12 & here's a picture http://forum.xda-developers.com/showpost.php?p=13962001&postcount=20
ahhh.. thank you!
didn't drop the tablet though...
the tapping didn't work, so I guess I need to open this thing up.... :I
themsn said:
ahhh.. thank you!
didn't drop the tablet though...
the tapping didn't work, so I guess I need to open this thing up.... :I
Click to expand...
Click to collapse
Or if under warranty you can request an RMA.
thank you again. the problem was exactly as the 2nd post (one with the picture) you linked for me described.
the display ribbon/cable below the first board was just slightly pulled out. So I pushed it back in gently with a flat head screw driver.
but taking that first board off to get to the ribbon below was nerve wracking. You have to disconnect so many different other ribbons and wires!
anyway. thank you so much for the tip.
now I'm just regretting the nvflash because I have to go back and reinstall my custom rom back to the way I like it now...
Thanks for the info!
Had to crack my case-couldnt really tell if the connector was loose under the board but I used my plastic case cracker aka credit card to push the base in and it sure seemed to do the trick....
just wish i hadnt nvflashed a pretty stable flashback setup...oh well time to try something new on
Hey guys, so I had dropped my phone and shattered the screen on the top left and there was a crack down the middle. Anyways, I ordered a replacement and replaced it..and low and behold, either I did a bad job or somethings up with the ribbon from the replacement screen. When I turn it on, the screen will display this weird static and I can see the mikmik splash screen (Newts RLS6.0), then it'll go black. I guess once the phone goes into sleep mode I can turn the screen back on with no problems. But, here's my main problem..I can't get into amon ra without the screen completely being messed up. I'm a flashaholic and this is terrible for me. Does anyone know how to fix the problem itself, or is there a way I can flash ROMs through PC? (S-Off). Thank you guys in advance
So a long while back when I was hacking my phone, I was using MAGLDR, I installed something else yet I can't recall it. The screen went white and that wouldn't turn on anymore. I charge it, yet, when I turn it on, I hear a very faint buzz and that's all. I dont't remember much on the stuff I did or anything else and I pretty much gave up on this phone for years but now I really it and I want to use this phone than all this new ones. Could any one help me in this situation?
skybreebree said:
So a long while back when I was hacking my phone, I was using MAGLDR, I installed something else yet I can't recall it. The screen went white and that wouldn't turn on anymore. I charge it, yet, when I turn it on, I hear a very faint buzz and that's all. I dont't remember much on the stuff I did or anything else and I pretty much gave up on this phone for years but now I really it and I want to use this phone than all this new ones. Could any one help me in this situation?
Click to expand...
Click to collapse
I guess you have tried getting to 3 colors screen? And when you turn it on only a buzz comes out, nothing else? like the HTC logo, boot screen?
skybreebree said:
So a long while back when I was hacking my phone, I was using MAGLDR, I installed something else yet I can't recall it. The screen went white and that wouldn't turn on anymore. I charge it, yet, when I turn it on, I hear a very faint buzz and that's all. I dont't remember much on the stuff I did or anything else and I pretty much gave up on this phone for years but now I really it and I want to use this phone than all this new ones. Could any one help me in this situation?
Click to expand...
Click to collapse
Fully charge your device with desktop charger and get to tricolor screeen and flash Stock ROM,than u can start all over again (Re-HSPL,Magldr,etc.) Hope it helps