Hello .
I got a StarTrek that disconects ramdomly.
I " shake" the phone , put and remove the bat and its the same.
I have updated to rom latest version.
Thnks a lot
Related
Hope anyone can help me - i' am still stuck - after trying and reading posts for 6 hours. i tried to flash the touch flo w6 rom on my charmer. activesync disconected during the flash proces. charmer does not start anymore - but i can get to bootloader screen.
But all roms i found and tried to flash need an activesync connection. could someone pls let me know how to flash from bootloader without active sync and where to find such a rom - if possible a w6 - if not w5 is also very very welcome!
Thanks a lot in adv!
are you using Vista ?
Good morning Urkraft!
Actually I do - but if nessecary I have ease access to a Computer running XP.
you need to use a PC running XP, then please try to flash the base ROM as Vdlock mention in his thread : http://www.tm-phonedownloads.com/fil...ileUK_Ship.exe
Reset to bootloader then connect teh USB cable to an XP machine and run teh above shipped ROM installer
Please make sure you do this before your goes flat, if you notice now it might not be even charging ...
Charmer is running again! Tks a lot Urkraft
And yes - I tried again - WM6 is running fine!
the link doesnt work is there a new one?
The link is dead... Please.... somebody help
Please update the link, it's dead and i'm in really need. Thanks in advance!
Hello my friends! how are you? i have a big problem with my vodafone smart ii and i need your help!!! My girlfriend try to restore it because of a problem and now the screen stacks at the green robot android! i havent check the boxes for the usb permissions you know if someone want to root it you have to check some boxes first as i remember!!! i try the restore console but nothing, i also have a programm from roddie thats fixes everything automaticaly but it stack in the search of the device...! i also have the usb drivers for it but there are no install files just some files and i dont know how to use them on the pc! what i can do now?
OK
Obviously you are new too. I had no idea what to do too the first time i bricked my phone like one and a half month ago...
Try searching the forum and experiment with your phone...
I don't understand completely what is your problem as I am new too but a simple solution could be this...
check if the drivers are installed correctly on your pc (if not search the forum for them, I can't recall in which post but a user uploaded them) and then try flashing the rom that roeddie gives(except of the recovery.img it's nonfunctional ) using this program Android_AIO_Flasher (search for it on the forum)
Edit: in order to flash the new img files you need to be in fastboot mode (press volume down continuously while powering on)
Go to
roeddie.blogspot.com
Ota update 3
U will find there The Solution !
Enjoy
Sent from my Vodafone Smart II using Tapatalk 2
Hi guys,
I flashed my HTC 7 Mozart 4 months ago and now I want to install ultrashot's Dynamics v2.0 on it.
There I have a question - 4 months ago I had to downgrade SPL etc. and install Custom ROM, everything what i have to do now is run 'MozartAdvencedRUU', take rom what I want and just flash? (Of course with Bootloader screen with USB title)
I know thats stupid question, but i didn't find answer on it and i'm scared of my phone a little bit (I dont want to brick it)
Sorry for my bad english
Hi ++
I think you forgot some of important things :
+ Be careful , your battery level must be more than 50% (if your phone turn off in the middle of flashing process ... (No need to continue )
+ your need a stable connection ( so use a reliable cable for this :good: )
+ just focus on this operation and close all apps and games on your PC ( I said it because some of apps and games maybe reset your computer or interrupt the process :crying
+ do this at night ( one of my personal experiences )
and
+ Believe that you can !
Goodluck !
SPIDER-7 said:
Hi ++
I think you forgot some of important things :
+ Be careful , your battery level must be more than 50% (if your phone turn off in the middle of flashing process ... (No need to continue )
+ your need a stable connection ( so use a reliable cable for this :good: )
+ just focus on this operation and close all apps and games on your PC ( I said it because some of apps and games maybe reset your computer or interrupt the process :crying
+ do this at night ( one of my personal experiences )
and
+ Believe that you can !
Goodluck !
Click to expand...
Click to collapse
I knew about battery level and connection, but thank you for reminding it
But now I have problem - when I connect mozart in bootloader by usb - it's still shows 'SERIAL' title, it doesn't change to 'USB', now I try to reinstall SDK but every time I try it shows message "Instalation Failed" and solutions for that, which don't work.
Has anybody similar problem?
Edit
Okay, Everything I had to do was install Windows Mobile Device Centre. It was pretty hard to find x64 version. I installed WP 7.8 and it works great.
Hello all,
Complicate situation , the wife of my best friend who got an American brother and lives with a Korean woman .
And this woman offer her hudsband sister her galaxy S1 as a gift
Recovered this weekend my freind let it to me to see what is possibel to do with it , it is precisely a SHW- M110S , from what I have read a version of the Samsung Galaxy S1 dedicated to the Korean market .
I firstly have struggled to put it into English , once the data wipe fact, it is return back in Korean, but nevermind
Firmware version is "2.1-update1" my mission is to find a newer but more especially European application layer .
Some applications still installed stay Korean for example
The worries begin :
I own a GS2 , I have already made several SHIFT via Odin , my desktop PC , my laptop are both already geared with drivers samsung, and when I plug the S1 , it is visible with its data .
Then here in that forum I pass by Odin to update it ( I found a M110S - Gingerbread -HOME- IMAGE - REV03 - WC13 -1023- USER) then a 2.3 for this phone S1 . My current concern is that Odin bloqued on the "Setupconnection" step.
( I put the rom in the PDA option , I do not check re-partition)
Not work at all, and I do not know what to do, I tried :
Update Samsung USB drivers => Still Blocked
Change USB port => Still Blocked
With or without SD or SIM card inside the S1 => Still Blocked
Stop the process Kies , Kies fired completely ( and restart the machine ) => Still Blocked
Tried another ROM ( GFAN_M110S_VG26_FTE9K_ODEX_SP5 : I do not even know what is this rom ) => Still Blocked
By rage attempted a pure S1 ROM ( A clean and full reinstall of classic I9000 S1 ) => Still Blocked
I'm lost
Any suggestion ?
Hi everyone !
just got this phone from my friend and the official rom is terrible , slow and having all this chiniese apps.
so i wanted to start by flashing custom recovery with sp flash tool but with no success , the download wont start.
im having windows 10 , may be a driver issue ? (the phone have to be off and connected to the usb cable and i think that the computer dont recorgnize it that way)
Any ideas of how to make it work ?