Does anyone know how to unbrick a HERM200 (TyTN) device?
After installing some programs i wanted to install Resco Explorer and then suddenly my device disconnected from my laptop i thought no big deal but the whole touchscreen is numb also none of the buttons on the TyTN are working. When i reboot the device i get the PIN screen i can enter the code also but is stays there and sometimes it skip's the PIN screen and goes directly to the Today screen but still the touchscreen and buttons are numb no response at all.
I can get in to boatloader by pressing left OK + power + reset.
But if i want to "re-flash" my device i goes into a reboot a the time de program is verifing my PDA.
Does anyone know what to do here?
OS = Black 2.5
Radio = 1.41.00.10
SPL = HardSPLv6 1.40 Olipro
Recently installed programs at the time of bricking the device are:
VITO Remote 4.1
VITO SoundExplorer
VITO Oscilloscope
then tried to install Resco Explorer 2005 and that was were the **** has hit the fan.
I would try a hard reset. If that doesn't help there is a sticky thread at the top of this section that is all about bricked devices (yours isn't really bricked, you are just having issues) that you can read through. Since you just installed Black 2.5 that thread would be the best place to discuss your issue.
Thanks
Thanks for the tip JasenR
How do i Hard Reset my device btw?
Nevermind i should read the wiki more often
Hard reset: Press and hold the Left SOFT KEY and Right SOFT KEY, and at the same time, use the stylus to press the RESET button at the bottom of your device. You will be presented with a menu saying 'press R to reset, X to exit', if you press R Your device will be set back to factory default settings.
(The L/R soft keys are the "--" keys just up the start and OK buttons)
Now hope it works for me.
Thanx anyway JasenR
Related
Can me anybody tell me, how Can I do a manual master reset? I know, in the Settings is item for Master reset, but I cant get to the system. Thx for any help...
Found this on modaco, hope it helps
rgds
Jim
Here is how to hard reset the Qtek 500, imate SmartFlip or Dopod S300.
Method #1:
You can just navigate to Clear Storage in your StartMenu, enter 1234 as indicated, then allow the phone to go thru the process.
Method #2
1) Turn Phone Off.
2) Press and hold the two soft Keys at the same time.
3) Turn the phone on (dont let go of the soft keys.
4) When the screen turns on, immediately release the soft keys.
5) A black screen should come up with white text stating to press 0 to reset device...any other key to exit.
Click to expand...
Click to collapse
Thank you for your help!
Are the soft keys the two at the top of the keypad? If so then this hard reset method doesn't work with my phone!
All the items from my start menu have disappeared so I can't use the first method - can anyone help?
mattwilkinson said:
Are the soft keys the two at the top of the keypad? If so then this hard reset method doesn't work with my phone!
All the items from my start menu have disappeared so I can't use the first method - can anyone help?
Click to expand...
Click to collapse
Softkey 1 is above the green button and softkey 2 is above the red.
hy !,
on my qtek 8500 press an hold the two soft keys, turn on the device ( just one press on/off ) but continue to press the two soft keys, wait few seconds and a black screen turn on " press send to hard reset or another key to quit " ( send key it's the green one ! ) and now you have your hard reset !
How Can I Reset T-mobile Mda Vario
HI EVERYONE,
MY PDA IS PRESENTLY OFF AND EACH TIME I TRIED SWITCHING IT ON IT REMAIN BOOYING AND SHOW NOTHING THAN THE WINDOW 6 START UP DISPLAY.COULD ANYONE HELP ME ON WHAT TO DO ABOUT.
THANK YOU IN ANTICIPATION.
how unlock wing
jerrry said:
Can me anybody tell me, how Can I do a manual master reset? I know, in the Settings is item for Master reset, but I cant get to the system. Thx for any help...
Click to expand...
Click to collapse
way mother flower
Hi,
I'm a hp rw6828 user and is very much enthusiast to try out those wm6 roms made by those experts. However, i did a mistake while trying to flash.
I tried flashing with a rom from wantat but i forgotten to delete the EBOOT.nb0 before i clicked "upgrade". Then the program stopped at 6% for a long time and didnt move. I disconnect the cables and tried to turn the device on.
THe device can go into the wm6 and the start button can be use but the screen is "moved" to the right side and other function is not working.
After that, i did a hard reset and the the os seem to work like normal. However, when i tried to go into bootloader mode by pressing both "_" and soft reset. That didnt work. I tried another way by taking out the batt, leave it for a 10mins, press both "_" and soft reset, put in batt, release soft reset then "_" keys. That didn't work either.
But, just lately, i've tried taking out batt, holding the camera key and softreset, place back batt, release soft reset n camera button. This method works and i get what it seems to be an atom bootloader?
i get a black background with "MN1 Bootloader Mar 29 2006 13;52;14 copyright..... 1) debug module through UART 2) jump to DM Enter your selection.
Can someone help me? I'm not sure what i'm facing and what to do? All you help is much appreciated. THank you.
Hi..I am unable to switch on my o2 xda stealth. This happened after the battery was fully exhusted. After that I fully charged the battery and now it is showing green. But still I cannot switch on this.
Anyone having the same experience and any solutions for this.
I tried to soft reset, and hard reset ( flag + ok + power button )..but none of these are working.
I would be really glad if someone helps me in this regard
Thanks
Sasank
xda repair
dear
u press three button togatther
1 (windows) 2 (ok) 3 (camera) button
and hold three button and press power button
if on select boot menu
now working
if not
u go to repair centre
Hi, i'd like to share a tips to HARD RESET O2 Stealth.
Days ago, i just bough a Stealth since my O2 IIi bricked (not by software/hardware accident), but my toddlers (daughter and son) likes to play my O2 IIi like a bumpy toy and throwed it to the wall and floor like a toy car/doll (i love my children more than my O2 IIi
its a new challenge for me to play with it, and started to browse xda-developers to find any upgrade (but unfortunately i still cant find it.. anyone found an OS upgrade for Stealth?)
And googled some tricks for this stealth, and for Hard Reset i found many different instructions (d**n), and its make me confuse and failed to hard reset this device.
then, just by trial error i found the right steps to hard reset my O2 Stealth.
I post it in my website, pls see the steps here www.padusi.com
pls use search feature in that website if the instruction page disappears from the main page.
Nice Try and Good Luck.
Very simple.
Hold down the power key until you see 'goodbye'.
Hold down windows & OK keys and the press power key....keep all three keys pressed down till you see 'welcome'.
Wait for the process to begin...don't panic if you see any clcourful screens.
Just follw the instructions like screen align etc ....and Voila..DONE.
bye.
kalya said:
Hold down the power key until you see 'goodbye'.
Hold down windows & OK keys and the press power key....keep all three keys pressed down till you see 'welcome'.
Wait for the process to begin...don't panic if you see any clcourful screens.
Just follw the instructions like screen align etc ....and Voila..DONE.
bye.
Click to expand...
Click to collapse
after some minutes white screen and nothing happend after that
If you cant hard reset then try the engineering mode
this is from yuc
The device doesn't boot, I see only O2 logo. Hard reset doesn't help and the Firmware update process stops with the first message?
1. turn off the device;
2. enter engineering mode;
3. in Main menu choose Boot Config;
4. in Configuration menu choose EBOOT-Launch Image;
5. turn off the device;
6. now hard reset or upgrade firmware.
Sometimes helps another method: leave the device without the battery for about 30 minutes, then turn your O2 XDA Stealth on.
• How to enter engineering mode?
1. turn off your O2 XDA Stealth ;
2. hold Flag, OK and Camera + press and hold Power button;
3. use navigation buttons to select the settings.
Click to expand...
Click to collapse
I installed today the WM 6.5 23409 (found here : http://forum.xda-developers.com/showthread.php?t=500021).
Everything went right, during 2 hours, until it froze. So I decided to reboot it, and now it's frozen on the "Smart mobility" screen.
It just displays the red text (M04, B04, R 1.65.28.25, G 25.98.40.07H, D 2.09) and nothing else happens. I tried to install a new version, but the NIKI is not detected anymore on the usb cable...
I think i screwd up and i really don't know how to fix it !!
Thank you for your help and sorry for my english...
Perform a hard reset
To perform a hard reset on a device that is not responding to input or not booting to Windows, first remove the back cover of the device. Hold the "call" and "end call" keys on the front of the device and reset the device by sticking the stylus into the small hole to the left side of the USB port. The device will ask for confirmation. To confirm, press the "Enter" key on the keypad. On some devices you need to press the "Action" key instead of "Enter".
The device will reboot and be reset to factory settings.
Thank you for your help. It happened exactly what you said, I had to confirm by pressing the ENTER key, but the NIKI stops exactly at the same moment.
OK, I found the solution.
I did a hard reboot by pressing the start button + camera button + reset with stylus. It boots on the hard SPL and is recognized by PC via usb.
I installed the Light version of WM 6.5 23409 and until now, it seems to work perfectly
You didn't make a hard reset but you just enterd the bootloader (you don't need the styles for that, just start-button and camera-button is ok). but I'm glad you've solved your problem. Have fun with your Niki
NEED niki100 Original vodafone Rom SPA or (ESP)
I can't find nothing
The phone is CID locked and no ROM
Tried sd update and nothing
"NIKI100"
SPL-1.16.0000
CPLD-4
marius_fl20 said:
NEED niki100 Original vodafone Rom SPA or (ESP)
I can't find nothing
The phone is CID locked and no ROM
Tried sd update and nothing
"NIKI100"
SPL-1.16.0000
CPLD-4
Click to expand...
Click to collapse
I only have a dumped version of RUU_Nike_Vodafone_ESN_1.31.164.09_Ship.exe , I'm not sure it will help you but at least you can give it a try, you can download the rom HERE
Goodluck
nop... is not working is stuck in 0%
But thanks anyway for being so fast
I was already afraid of that, can you tell me how you lost your rom ?
Greetz,
well i got it from someone (a friend )
hi said: "I wiped out something from windows folder"
after that the phone start only with vodaphone logo and stuck there.
so i tried with MTTY commands and format all "TASK 2A"(this is after 4-5 days of searching ROM's and other stuf for NIKI100) I manage to save the radio version .etc.
R 1.58.16.27
G 25.61.30.03W
D 1.31
m 04
b 04
If you know something about MTTY commands i am happy to know.
Besides this http://forum.xda-developers.com/wiki/index.php?title=Trinity_BootLoader#HTC_Trinity_BootLoader
thanks again..(sory about my english i am from Romania)
marius_fl20 said:
well i got it from someone (a friend )
hi said: "I wiped out something from windows folder"
after that the phone start only with vodaphone logo and stuck there.
so i tried with MTTY commands and format all "TASK 2A"(this is after 4-5 days of searching ROM's and other stuf for NIKI100) I manage to save the radio version .etc.
R 1.58.16.27
G 25.61.30.03W
D 1.31
m 04
b 04
If you know something about MTTY commands i am happy to know.
Besides this http://forum.xda-developers.com/wiki/index.php?title=Trinity_BootLoader#HTC_Trinity_BootLoader
thanks again..(sory about my english i am from Romania)
Click to expand...
Click to collapse
You better started HERE instead of using MTTY, it's harder to recover than to brick, most of the time people brick their device by using the command task 2a.
For now there are 2 options.
1. Perform a hardreset :
To perform a hard reset on a device that is not responding to input or not booting to Windows, first remove the back cover of the device. Hold the "call" and "end call" keys on the front of the device and reset the device by sticking the stylus into the small hole to the left side of the USB port. The device will ask for confirmation. To confirm, press the "Enter" key on the keypad. On some devices you need to press the "Action" key instead of "Enter".
The device will reboot and be reset to factory settings.
2. Try Frankenkaiser, see this post.
Succes buddy
since I got your post i am working.
The problem is the commands are only for kaiser bootloader
and i am trying to get my phone in "dload" mode like here http://forum.xda-developers.com/archive/index.php/t-394584.html
but in MTTY doesn't accep command "setboot 1"
to write the security unlock commands
it my bee a chance with this "FrankenKaiser"
ouhhh !!!!
the command are not the same for niki100(or spl 1.16.0000)(at least not all of them)
this is why i formatted my device
i was trying commands and ...opppss....ther goes my ROM
and it didn't work HARD RESET in the fist place
marius_fl20 said:
since I got your post i am working.
The problem is the commands are only for kaiser bootloader
and i am trying to get my phone in "dload" mode like here http://forum.xda-developers.com/archive/index.php/t-394584.html
but in MTTY doesn't accep command "setboot 1"
to write the security unlock commands
it my bee a chance with this "FrankenKaiser"
ouhhh !!!!
the command are not the same for niki100(or spl 1.16.0000)(at least not all of them)
this is why i formatted my device
i was trying commands and ...opppss....ther goes my ROM
Click to expand...
Click to collapse
marius_fl20 said:
and it didn't work HARD RESET in the fist place
Click to expand...
Click to collapse
I think the biggest problem is that your device wasn't unlocked before you bricked it, can you tell me what your device is doing now are is it complete dead.
Regards,
1.normal start - it vibrate and then white screen and stop here.
2.boot loader mode - pressing camera button + pwr button, no problem here.
3.hard reset - pressing send(green) button + end(red) button + pwr button
(no problem)it enter ok (this operation will delete.....)
butt after i press action key (not enter) "restore complete press
SEND to restart"
After i press send it vibrate and then white screen
marius_fl20 said:
1.normal start - it vibrate and then white screen and stop here.
2.boot loader mode - pressing camera button + pwr button, no problem here.
3.hard reset - pressing send(green) button + end(red) button + pwr button
(no problem)it enter ok (this operation will delete.....)
butt after i press action key (not enter) "restore complete press
SEND to restart"
After i press send it vibrate and then white screen
Click to expand...
Click to collapse
Ok, your phone is doing more than mine, I also had a white screen and try to flash the original rom, that didn't work so I tried the wwe 2.16 version and it started flashing but stops at 69%, now I have an Upgrade ROM code error in my bootloader, the biggest problem with your phone is that you don't have an hardspl, now I'm reading this post.
I'll keep you informed when I found something.
Regards,
I don't understand the commands from "FrankenKaiser"
For example what shoukd i type in instead of "/dev/com1"
What is my pot No (usb)
What should i see in CMD window
And what is it with "Replug USB cable now!"
Thanks for not leaving alone!
It looks like they have it (the rom)
But i can not register.
Can you give it a try .
http://www.htcspain.com/roms-touch-dual-60/roms-oficiales-5085/
please!!!!
marius_fl20 said:
It looks like they have it (the rom)
But i can not register.
Can you give it a try .
http://www.htcspain.com/roms-touch-dual-60/roms-oficiales-5085/
please!!!!
Click to expand...
Click to collapse
Ok I'll gonna give it a try and keep you informed.