Hi,
I'm a hp rw6828 user and is very much enthusiast to try out those wm6 roms made by those experts. However, i did a mistake while trying to flash.
I tried flashing with a rom from wantat but i forgotten to delete the EBOOT.nb0 before i clicked "upgrade". Then the program stopped at 6% for a long time and didnt move. I disconnect the cables and tried to turn the device on.
THe device can go into the wm6 and the start button can be use but the screen is "moved" to the right side and other function is not working.
After that, i did a hard reset and the the os seem to work like normal. However, when i tried to go into bootloader mode by pressing both "_" and soft reset. That didnt work. I tried another way by taking out the batt, leave it for a 10mins, press both "_" and soft reset, put in batt, release soft reset then "_" keys. That didn't work either.
But, just lately, i've tried taking out batt, holding the camera key and softreset, place back batt, release soft reset n camera button. This method works and i get what it seems to be an atom bootloader?
i get a black background with "MN1 Bootloader Mar 29 2006 13;52;14 copyright..... 1) debug module through UART 2) jump to DM Enter your selection.
Can someone help me? I'm not sure what i'm facing and what to do? All you help is much appreciated. THank you.
Related
Does anyone know how to unbrick a HERM200 (TyTN) device?
After installing some programs i wanted to install Resco Explorer and then suddenly my device disconnected from my laptop i thought no big deal but the whole touchscreen is numb also none of the buttons on the TyTN are working. When i reboot the device i get the PIN screen i can enter the code also but is stays there and sometimes it skip's the PIN screen and goes directly to the Today screen but still the touchscreen and buttons are numb no response at all.
I can get in to boatloader by pressing left OK + power + reset.
But if i want to "re-flash" my device i goes into a reboot a the time de program is verifing my PDA.
Does anyone know what to do here?
OS = Black 2.5
Radio = 1.41.00.10
SPL = HardSPLv6 1.40 Olipro
Recently installed programs at the time of bricking the device are:
VITO Remote 4.1
VITO SoundExplorer
VITO Oscilloscope
then tried to install Resco Explorer 2005 and that was were the **** has hit the fan.
I would try a hard reset. If that doesn't help there is a sticky thread at the top of this section that is all about bricked devices (yours isn't really bricked, you are just having issues) that you can read through. Since you just installed Black 2.5 that thread would be the best place to discuss your issue.
Thanks
Thanks for the tip JasenR
How do i Hard Reset my device btw?
Nevermind i should read the wiki more often
Hard reset: Press and hold the Left SOFT KEY and Right SOFT KEY, and at the same time, use the stylus to press the RESET button at the bottom of your device. You will be presented with a menu saying 'press R to reset, X to exit', if you press R Your device will be set back to factory default settings.
(The L/R soft keys are the "--" keys just up the start and OK buttons)
Now hope it works for me.
Thanx anyway JasenR
Hi!
I downloaded a dumped German WM6 Rom. Now I have a big problem. I turn the device on, and the normal HTC Logo appears.
After that, the Qtek Logo appers, and that is all. After the second Logo nothing happens. What can I do?
I tried a soft reset, the same problem. (Reset Button)
I tried a hard reset, the same problem. (Camera, Comm-Manager, Reset)
I tried the same with the Camera and the Reset Button without the Comm-Manager Button. Is it possible to get a running system back? I made a Backup long time ago, so the files can be deleted.
Thank you very very much.
Enter bootloader mode, connect the usb cable and flash back to original WM5 rom.
Hi!
Damn, I used the wrong update. Thanks..
I had wm6 on it, prophet touch 4.0.0.6 and i tried now to install IX version, and after first install i made reboot and doesn't start anymore (. It's stucked in HTC Prophet Touch from beginning, and is showing in left corner ILP SPL..etc...in bootloader i can't enter (doesn't appear anymore). what should I do? It's a G4
Did you TRY to enter bootloader yourself??? I haven't quite understood your post. In case you didn't:
Press Camera + Soft Reset, then release soft reset and keep pressing camera button till bootloader appears.
yes i tried that. I've pressed camera+soft reset and holding camera..and nothing happened.
yes i tried that. I've pressed camera+soft reset and holding camera..and nothing happened.
solved. it was from my SD card. i've get it off and now is working: entering bootloader, installing ROM. thx anyway.
Hello there
I have a Touch Pro device, and since yesterday evening, after the phone goes in sleep mode (or after i press the power button), it doesn't turn back on. I can't reset, can't Hard reset even. If i call the phone, it rings, but the screen doesn't turn on, neither the illumination of the keys, or the keyboard. If I take out the battery and put it back, it boots OK, screen works, until it goes to sleep mode, after that... the same.
I had Romeos ROMeOS² v1.90.2] when the problem started, now i was able to flash it to ShEp's Rom Ver 2.3a][WinMo 6.5][Build 21198 Ver 2][TF3D Ver 2] and the problem still persists.
Thanks for your help.
Update: I haven't done anything and now it's does not even boot, it vibrates when its turned on, and i can hear the start up melody, bot no screen and no keyboard illumination.
might help
I'm no expert, but have you tried Bootloader mode? If you can get into bootloader mode after taking out the battery and restarting, try flashing Hard SPL again then a stock ROM with a radio. With the phone plugged into the USB port it shouldn't go to sleep. If that doesn't work it may be bricked.
Untill now the phone started after i took the battery out, and i flashed it to another rom. Even after this it started up after i took the battery out, after that i haven't done anything and now it doesn't screen wont start even after i took the battery out.
The only thing i didn't try was hardspl again......
OOh man, i was trying to do a hard reset without the screen. and now if i turn the phone on, every time i press vol down/up after i certain time, the phone vibrates as when you turn it on. It's stuck at the hard reset phase ?
How is the hard reset ? Vol up to hard reset and after that vol up to boot ?
Suggest you read the wiki
Have a look at the wiki for beginners. Hard reset is normally hold VOLUME DOWN AND CENTER BUTTON then reset with stylus.
Thank you for beeng so friendly and helpfull, since the display was off, i asked what too push AFTER entering the hard reset screen. It was VolUp to hard reset, and afther that VolUp again to reboot. Or VolDown... It doesen't matter, i took the phone back to Orange warranty
I don't know what will they say... HardSPL+ Custom Rom... But phone won't start so mabey they wont notice
Cheers
I installed today the WM 6.5 23409 (found here : http://forum.xda-developers.com/showthread.php?t=500021).
Everything went right, during 2 hours, until it froze. So I decided to reboot it, and now it's frozen on the "Smart mobility" screen.
It just displays the red text (M04, B04, R 1.65.28.25, G 25.98.40.07H, D 2.09) and nothing else happens. I tried to install a new version, but the NIKI is not detected anymore on the usb cable...
I think i screwd up and i really don't know how to fix it !!
Thank you for your help and sorry for my english...
Perform a hard reset
To perform a hard reset on a device that is not responding to input or not booting to Windows, first remove the back cover of the device. Hold the "call" and "end call" keys on the front of the device and reset the device by sticking the stylus into the small hole to the left side of the USB port. The device will ask for confirmation. To confirm, press the "Enter" key on the keypad. On some devices you need to press the "Action" key instead of "Enter".
The device will reboot and be reset to factory settings.
Thank you for your help. It happened exactly what you said, I had to confirm by pressing the ENTER key, but the NIKI stops exactly at the same moment.
OK, I found the solution.
I did a hard reboot by pressing the start button + camera button + reset with stylus. It boots on the hard SPL and is recognized by PC via usb.
I installed the Light version of WM 6.5 23409 and until now, it seems to work perfectly
You didn't make a hard reset but you just enterd the bootloader (you don't need the styles for that, just start-button and camera-button is ok). but I'm glad you've solved your problem. Have fun with your Niki