Hi!
I downloaded a dumped German WM6 Rom. Now I have a big problem. I turn the device on, and the normal HTC Logo appears.
After that, the Qtek Logo appers, and that is all. After the second Logo nothing happens. What can I do?
I tried a soft reset, the same problem. (Reset Button)
I tried a hard reset, the same problem. (Camera, Comm-Manager, Reset)
I tried the same with the Camera and the Reset Button without the Comm-Manager Button. Is it possible to get a running system back? I made a Backup long time ago, so the files can be deleted.
Thank you very very much.
Enter bootloader mode, connect the usb cable and flash back to original WM5 rom.
Hi!
Damn, I used the wrong update. Thanks..
Related
I had wm6 on it, prophet touch 4.0.0.6 and i tried now to install IX version, and after first install i made reboot and doesn't start anymore (. It's stucked in HTC Prophet Touch from beginning, and is showing in left corner ILP SPL..etc...in bootloader i can't enter (doesn't appear anymore). what should I do? It's a G4
Did you TRY to enter bootloader yourself??? I haven't quite understood your post. In case you didn't:
Press Camera + Soft Reset, then release soft reset and keep pressing camera button till bootloader appears.
yes i tried that. I've pressed camera+soft reset and holding camera..and nothing happened.
yes i tried that. I've pressed camera+soft reset and holding camera..and nothing happened.
solved. it was from my SD card. i've get it off and now is working: entering bootloader, installing ROM. thx anyway.
Hi,
I'm a hp rw6828 user and is very much enthusiast to try out those wm6 roms made by those experts. However, i did a mistake while trying to flash.
I tried flashing with a rom from wantat but i forgotten to delete the EBOOT.nb0 before i clicked "upgrade". Then the program stopped at 6% for a long time and didnt move. I disconnect the cables and tried to turn the device on.
THe device can go into the wm6 and the start button can be use but the screen is "moved" to the right side and other function is not working.
After that, i did a hard reset and the the os seem to work like normal. However, when i tried to go into bootloader mode by pressing both "_" and soft reset. That didnt work. I tried another way by taking out the batt, leave it for a 10mins, press both "_" and soft reset, put in batt, release soft reset then "_" keys. That didn't work either.
But, just lately, i've tried taking out batt, holding the camera key and softreset, place back batt, release soft reset n camera button. This method works and i get what it seems to be an atom bootloader?
i get a black background with "MN1 Bootloader Mar 29 2006 13;52;14 copyright..... 1) debug module through UART 2) jump to DM Enter your selection.
Can someone help me? I'm not sure what i'm facing and what to do? All you help is much appreciated. THank you.
I cant get to bootloader mode by camera+reset.
all my o2 atom life does is soft reboot then start wm again.
i've alrdy tried hard reboot and reflashing to the original rom from o2.
help?
Nevermind, i found out that its supposed to be the voicerecord button, not camera button, and the usb has to be plugged in b4 reset.
delete post
PLEASE help
I've flashed my Prophet to ROM Diamond..........
Everything was fine, instalation without any problem...
But when it was done, I've made a hard reset and than it just loads bootloader and nothing alse, when I tryed to flash-back the WM5 it writes that I haven't connected PDA to PC.
PLSSSSSSSSSSSSSSSSSS
Help !
connect USB lead press and hold camera button / press reset button still holing cam button a three colour boot screen should appear now you can re flash your ROM using the normal method
thanks
thank's for reply, I've tryed this but nothing happend, but the "NVID_RUU" has solved that. ;-) THXXX
where ?
and just onw more question.. where can I down the "HARD SPL" ? I've looked around but havent foud any...
I think this tool does the spl for you
Info
http://forum.xda-developers.com/showpost.php?p=2317108&postcount=1
Download here:
http://rs636.rapidshare.com/files/209950732/Prophet_Tools_2.8.3.zip
thX
thank's now its fully working and running on wm6.1
I HAVE THE SPRINT TOUCH PRO STOCK ROM.
A WHILE AGO I REGRETABLY INSTALLED [ezInput 2.1]
[http://mylostblog.altervista.org/software/freeware/per-htc/htc-freeware-htc-keyboard-ezinput-21]
WHEN I DID THE SOFT RESET MY DEVICE GOT STUCK ON THE "TOUCH PRO SCREEN WITH Rom/Radio... info at the bottom.
I've tried several different things to try and make it work.
1. took out the battery and restart.
2. take out the memory card (where i installed) then baterry and restart
3. tried to connect to laptop (nothing)
notes: power button doesn't do anything
when i call my phone the LED light flickers for incoming call,
but, cannot answer.
tried searching for solutions on xda
http://forum.xda-developers.com/showthread.php?t=446719
i dont have "insurance" so i just cant get a new one
CAN ANYONE HELP ME WITH THIS PROBLEM???
NEW MESSAGE POPPED UP: the device is unable to boot beacuse either you have turned off the device incorrectly or tried to install an application from an untrusted source. press the volume up to reset your device or press any other button to cancel. this operation will delete all your personal data and restore the device to its factory settings.
You have to hard reset the device, like the message stated. If that doesn't do the trick, boot it in tricolor mode and reflash the ROM.
<SOLVED>
Problem solved. Factory reset. Good thing i had back-up.