I stuck, i've loaded tomtom to my whallaby but it say's it can't find maps. Also can anyone confirm if it's ok to use a 2gb card?
Cam
Related
Hi can anyone help?
I bought a XDA last year on ebay from XDA-Developers, with tom tom software, all was working fine until i tried to update the speed camera database last week. I downloaded the new poi's and then activated Tom Tom on XDA. The tom tom now states that there are no maps?
I have bought a disk with tom tom 5 software on and tried to reinstal on to XDA but it is still not working. The Tom Tom was originally stored on memory card. Can you buy the memory cards and will this solve problem. Really need this to work as travel loads and loads at moment. Thanks for reading Craftus..........
Can u explain a bit more in detail that what have u installed & where (which folders) have u installed.
Sidd
[email protected]
Hi,
I have reinstalled tom tom five of disk, but the tom tom is not activating, i think i may have caused more damage, as it kept stating that there was not enough memory on storage card, i deleated the duplicate copies to free up memory but still not working, tom tom is on PDA but not activating. Thanks for your reply
Craftus
First of all ur SD card must be BIGGER than 128mb, bcs TomTom5 takes approx 140mb
No u cannot reinstalled TomTom on a previous installation on ur PocketPC, if u have done so then, uninstall TomTom from PPC (all the files starting with "TomTom" name)(should be 4-5 files), takeout ur SD card and format it on a normal mode (not Quick Format), but u have to connect ur SD card to the PC directly (not via PPC cradle), u must have to have a card reader to do that.
Jessops Link:
http://www.jessops.com/search/viewp...N=4b9e83-6934583d-a469-4819-8d9c-6f7af79602d9
Ebay link:
http://cgi.ebay.co.uk/USB-CARD-READ...ryZ48546QQrdZ1QQcmdZViewItem#ebayphotohosting
Once u finish formatting the SD card, put it back to PocketPC, sync on cradle with PC and now install TomTom again.
:idea: GoodLuck :idea:
Sidd
Thanks, i'll give it a try
Craftus.
Hi guys, I have this problem - I had WM5 and I downgraded to WM2003SE (the translated Chinese version). at first it looks ok BUT now i don't have this screen that asks me whether to install on the storage card or in the main memory. Every time I install something it just goes to the main storage. Even the active sync installations say that my storage card is not accessible. What could be the problem? Can anyone help?
(I tried with the search but I just got more confused, so if there is an explanation please show me the link :roll: )
or should I try another ROM? please recommend one (2003se)
Hi all,
I installed iGo 8 on my charmer, for some reason the installation did not work, but I managed to just start the program from my sd card.
It is relly cool and I like it a lot, but all of a sudden it does not work anymore.
When I start it it loads everything up to "starting" and then I get the following fatal error message:
Fatal Error occured in main thread
Address: 0x00282b34
Exeption: 0xc0000005
Does anybody have a solution for that problem.
The only thing I can imagine that caused the problem: I tried some patches to read sdhc cards on my charmer, but it did not work so I deinstalled the patches...
Does anybody have some advice for me?
Thanks,
Jared
How do you install iGO? Is it an original copy on SD card? If so, I think they sell it on SDHC cards, which Charmer does not support so far.
What do you mean by: "but all of a sudden it does not work anymore"? Did it work, and then one day it stopped?
yes it did work perfectly at first
well I installed a "copy" on my normal sd card.
And appart from the installation part it just worked perfekt.
But from one day to another I got that error...
I tried to copy all files again, same result...
Any ideas?
I'm running iGo8 on ridingshark's WM6 without any problems. However, I did *not* try to patch the OS for SDHC support.
Hardreset might help...
Only Hard Reset helped
I could not find a solution to fix the problem, so therefore made a backup then a Hardreset, installed iGo - it worked instantly - and put back on my data.
Now everything works fine again!
I guess the SDHC patch messed up the whole thing.
Too bad there isn't a way to use SDHC cards with the charmer
Hi all,
Got a wierd problem here that I hope someone is able to help me with. I delved into the world of flashing ROMs and seem to have done something to my memory card.
I've had an HD2 for over a year and have a 16GB memory card that has functioned perfectly over this time. I flashed the WM7 ROM onto the phone the other day (with no problems) and was able to use my memory card with WM7 with no problems.
I have now flashed Android 2.3 onto the phone and my memory card is now showing a capacity of only 200mb. I am unable to format it above this. I've had a good look around the forums/interweb but cannot seem to find a solution.
Anyone got any ideas?
Any help would be greatly appriciated.
BMStalker said:
Hi all,
Got a wierd problem here that I hope someone is able to help me with. I delved into the world of flashing ROMs and seem to have done something to my memory card.
I've had an HD2 for over a year and have a 16GB memory card that has functioned perfectly over this time. I flashed the WM7 ROM onto the phone the other day (with no problems) and was able to use my memory card with WM7 with no problems.
I have now flashed Android 2.3 onto the phone and my memory card is now showing a capacity of only 200mb. I am unable to format it above this. I've had a good look around the forums/interweb but cannot seem to find a solution.
Anyone got any ideas?
Any help would be greatly appriciated.
Click to expand...
Click to collapse
yep..
WP7 does that,
Download panasonic SD formatter , it should do the trick, Oh pls dont forget to back up data
mally2 said:
yep..
WP7 does that,
Download panasonic SD formatter , it should do the trick, Oh pls dont forget to back up data
Click to expand...
Click to collapse
Thanks, I downloaded the SDFormatter tool and when I run it, it still only gives me the option to format it as 200MB. I am unable to adjust the partition size. Is there anything else i need to do?
there is only one thing that you can do
go back to winmo 6.5 open sd formater and let it format the sd card
then you are done, full capacity will show up
i had the same problem for a while and i tried everything but winmo formater
seems to be the only one which can solve the problem
Hi,i have a problemm with installing apps, i have over 8.20 gb of storage left and when i try to install asphalt 6 or anything else it says that i dont have enough space available,how is this possible??? plz help,
Thanks in advance
kevjee said:
Hi,i have a problemm with installing apps, i have over 8.20 gb of storage left and when i try to install asphalt 6 or anything else it says that i dont have enough space available,how is this possible??? plz help,
Thanks in advance
Click to expand...
Click to collapse
That's more of a market problem. Play store is not recognizing the free space for this app. It happened to me a few times on my SGS1. Do you have an SD card? Try switching to installing apps to that. And then switch it back to your ext SD later.
i didnt download it from play store, i downloaded it trough laptop,copied the file to my sgs3,and tried to install,but nothing works yes i have a ext sd,but how do i change it? i 'm not able to find the place where you can switch the install dir for your apps?
Try do download it from playstore instead.