I flashed my G4 Cingular 8125 CID Locked with Faria Crossbow via the shelltool. At startup I get an error from the SDDialer, voice dial software, saying this:
The file “sddaemon” cannot be opened. Either it is not signed with a trusted certificate, or one of its components cannot be found. If the problem persists, try reinstalling or restoring this file.
The voice dial does not work as well. Simply put the voice dialing software is not working or installed. Any suggestions, on replacing the file or voice dialing software that I can use?
Thanks
I think I found my answer:
http://forum.xda-developers.com/showthread.php?t=296337
Related
I'm looking for any 'working' fax software for my Qtek 2020 with 1.72 ROM installed. Anyone knows something about it?
You may try KSE Truefax latest version (2.08 Pocket PC Phone)
Thank you for your advise, but I have already tried that one. After downloading, I get message that is not valid software for my device. Any other possibility?
I had the same problem. But today I downloaded the latest version from their site...and it worked!!
I have an i-mate 1.72.
I have tried today, too, but result was the same. Can you give me exact link from which you downloaded it succesfully?
Did you actually send or recieve a fax?, I ask because i have just installed the latest version and whilst it installs no problem, i cannot select the modem in the xda2 because it isnt in the lists options ?
You have to install the latest 2.08 version for XDA II, from the website www.ksesoftware.com
It is the last one on the list.
Now, to be honest, since yesterday I've been trying to send faxes (not receive). I don't know why, but sometimes it succeeds and sometimes (more), it hangs.
By the way, you don't have to make any settings for the modem in this version, because it is already fixed to internal moden on XDA II.
KSE fax software works only with some ROM vers. I'm sure... this software doesn't work with 1.66. Maybe works with 1.72....
Bye, M.
My experience in TrueFax is my Mobile provider boarded the transmission of fax. Thus, I can't get and sent fax unless I paid them for the fax service.
Few days ago, I`ve bought that software (Truefax 2.0 Phone Edition II). I have installed it successfully and start sending faxes with no problems, but even I have special fax number from my provider, cannot receive faxes. It starts well (screen: "waiting for incoming call", then "answer"), you can hear the "fax signal" from the other`s fax speaker, but at that moment transfer is stopped and "no carrier detected" is displayed.
I wrote about this problem to '[email protected]' and now waiting for their respond. Anybody have a solution?
ok does anyone know if the imei-check.co.uk does that do a cid unlock also?
I followed the instructions and installed the new rom from faria's 4 step installer.
My questions are everything seem to go ok however i am getting a
sddaemon cannot be opened. either it is not signed with a trusted certificate, or one of it's components cannot be found. if the problem persists, try reinstalling or restorin this file.
What does this program do? how to fix this?
Also when i was doing the flashing there was small icons above the "calendar" "contacts" that are not there anymore. like a blue tooth icon small green circle icon that allows you to restart wizard, small lock so you can lock the screen and buttons.. any idea why these don't show now? i get the little battery and mda that switches the screen layout but not the other ones.
Yes, imei-check does CID unlock.
However it is not required to CID unlock if you use ShellTool and you have a OEM ROM on hand for restoring.
Using aWizard or ShellTool may require you to hard reset for 2 to 3 times for the OS to function without any problem. If you tried to hard reset and the problem persists, flash with the same ROM again.
Thank you Starkwong. I did do the imei-check.co.uk even though i already had sim unlocked my phone with lokiwiz.
i will try hard reseting it a few times to see what happens.
i did find that the sddaemon is for the voice dialer which i just deleted since i don't use voice dial.
i thank you again for replying.
Hi All
I have a G4 which I think is CID locked.
IPL 2.21.0001
SPL 2.21.0001
I have managed to get a number of different WM6 ROMs in
and 'sort-of' working. The reason for the upgrade is to get A2DP
working with my nice Motorola S9's. All of the WM6 ROMs give
me A2DP, however 'Contacts' does not work on any of them.
The Contacts screen flashes up for a moment then closes.
I have tried Titan V2.0, TNT 4.0 and SeeNoEvil ROMs
Any ideas? Thanks in advance.
JayDee
Try install contact manager iphone v 0.11 . The built-in manager is crap. Really
Hi
I got Pocket CM 0.7 and that does the same thing.
Thanks
It is known that restoring WM5 contact database to WM6 device does not work. You should use a backup program that does not backup the contacts database directly, or to backup with ActiveSync+Outlook.
Hi
Thanks for the reply
I am not trying to restore my contact list, I am trying to launch
'contacts'.
I have gone to \Windows and 'tapped' on addrbook.exe and
that does the same thing. The 'contacts' screen pops up for
a moment, then shuts down again, as though looking for a
.dll that isn't there. 'Calander' and 'tasks' work fine so I am
sure 'poutlook.exe' is working, it's just 'contacts' that doesn't
work.
Does any "super-softie" know what files addrbook.exe needs to
open/touch in order to run?
Jaydee
Hi.
I had the same problem as yours.
I am also using a 2.21.0001 G4 CID locked.
Also the Windows Live Messager only flashed but not really running. The way to solve this is very simple.
Just do a hard reset. After that you will be able to use both msn and contacts.
You are welcome
I have about the same wizard as you.
I tried to cid unlock it but i still get the same spl and not the olipro one.
Any idea?
Thanks.
i have 3 wizards: 1 is a cingular 8125, 2 are t-mobile MDAs. the 8125 and one of the MDA are both G3, and one MDA is a G4. both G3s are running WM6 no problem, both CID unlocked and all. used the shell tool to install the TNT3.0 WM6, worked out well after the 2nd try, but the ONLY problem is that the internet explorer (and any internet related apps) won't work anymore. i can connect to EDGE/GPRS, the IE will say "connecting...locating...opening" and get stuck at opening. finally the IE will report:
Error 502 - Bad Request
The server could not resolve your request for uri:/
note it says "uri" and not "url"
i don't get it. both MDAs were flashed with the latest T-mobile ROM, clean install. the only difference is that one is a G3 and one is a G4.
what is the problem with my connection?
phone calls OK, SMS OK, system runs fine. just can't seem to get the HTTP related service to work right. can anyone help?
I am trying to update to WM6 on my G4, evertime i use the update utilty tool and I get to the "verify that you want to update the ROM version" I cannot see the replacement rom,
what am I doing wrong?
I see:
Model ID wizard
model version 1.2.0.0
language english
to
model version wizard
image version (nothing its blank)
language WWE
any idea what I am doing wrong?
I have tried several Rom packs from here but get the same on all
Its not possible to upgrade to wm6 with a CID locked phone.Read and follow the SoftSPL or HardSPL method posted as stickies in the G4 sub-forum.
yep, i used the unlocker, after downloading the tutorial here i saw where I was going wrong, now have the new Rom updated and working well, except.......
No data or internet connection, all other functions work, bluetooth, wireless phone sms etc but cannot connect to internet or send recieve mail. just get "cannot connect with current connection settings" message. it used to be the 02 software, still running an the same 02 sim which works fine in my other phone, either I am missing something on settings for the new rom. using the Mfrazzz wm6 Rom
any ideas?
You need to set up the GPRS settings for your carrier,get them from O2 or check out this link:-
http://forum.xda-developers.com/showthread.php?t=299023