I am trying to update to WM6 on my G4, evertime i use the update utilty tool and I get to the "verify that you want to update the ROM version" I cannot see the replacement rom,
what am I doing wrong?
I see:
Model ID wizard
model version 1.2.0.0
language english
to
model version wizard
image version (nothing its blank)
language WWE
any idea what I am doing wrong?
I have tried several Rom packs from here but get the same on all
Its not possible to upgrade to wm6 with a CID locked phone.Read and follow the SoftSPL or HardSPL method posted as stickies in the G4 sub-forum.
yep, i used the unlocker, after downloading the tutorial here i saw where I was going wrong, now have the new Rom updated and working well, except.......
No data or internet connection, all other functions work, bluetooth, wireless phone sms etc but cannot connect to internet or send recieve mail. just get "cannot connect with current connection settings" message. it used to be the 02 software, still running an the same 02 sim which works fine in my other phone, either I am missing something on settings for the new rom. using the Mfrazzz wm6 Rom
any ideas?
You need to set up the GPRS settings for your carrier,get them from O2 or check out this link:-
http://forum.xda-developers.com/showthread.php?t=299023
Related
my first post and contribution.. hopefully it would be alot of help to other people..
this is the official IMATE 1.72 ROM...except that it was encoded to work with O2 XDA2 units
added the O2 splash screen to retain the O2 bootup image -just load O2.cab into your XDA2
the upgrade utility shouldnt show you any more country ID error for O2 XDA2 units.. if there are problems.. holler me ASAP!!
feedbacks would be nice, coz i would like to make upgrades for other Network providers as well..
Thanks for that.
Can you show me a step by step guide on how to upgrade O2 xda 2 1.60.WWE version to this?
Thanks again.
ok... im not an expert yet, coz i just had my XDA2 for a week, but i do enjoy tweaking and playing with it.. besides, the knowledge i gain thru reading this forum is more than enough..
ok.. here goes..
1. create a full BACKUP your XDA2.. (but i dunno if this is helpful should you fail to upgrade your ROM)
2. download the above file and extract it.
3. you should see it extract 7 files.
4. put your xda2 in the cradle connected to the PC
5. run HimaUpgradeUt.exe
6. wait around 30-60 mins. then follow the procedure as shown on your computer. (a hard reset would be required)
7. after the upgrade is done, you should see the IMATE screen upon booting up (instead of the O2 bubble screen) if you wanne be extra sure, check your XDA2 version.if everything is ok, then you should have upgraded it correctly
8. if you want to revert to the old O2 splash screen during bootup, then copy O2.cab to your XDA2 and run it there. Do a soft reset, and voila, it should be back to the old O2 bootscreen.
I suggest that you contact your NETWORK PROVIDER because you will need to manually configure GPRS, MMS, and INTERNET settings on your xda2 after doing the upgrade.
WARNING: i wont be held responsible or liable for failed upgrade of your unit. Please understand that by agreeing to upgrade your XDA2, you are taking full responsibility of whatever untoward incidents that may occur to your XDA2. Flashing the rom might lead to DATA LOSS, SYSTEM MALFUNCTION, and even DEVICE MALFUNCTION.
but.. the rewards of upgrading it is sweet!
Many thanks for all of these description.
BTW, how do you feel the upgrade?
What you really get from this?
Can you share with us?
Thanks again.
Cheers mate.
i dunno, im just a week old newbie in using XDA2 :wink:
i just enjoy tweaking the XDA..so far, no problems here.
My xda2 currently is 1.66wwe. after upgrade to 1.72wwe, what's the different between it? anything increase? sorry because i'm a new bird
did a lil research.. so far, came to this...
The 1.72 ROM eliminates the majority of problems from the 1.66 ROM such as:
Increased battery drain
Device slows down
Bluetooth GPS devices don't work, even with Pocket Bluetooth Tools
Can it be downgraded back to O2 xda2 1.60WWE Rom?
Many thanks.
i doubt that it can be downgraded... i havent personally tried to downgrade my ROM to a lower version.. but there are other threads related to this, and they claim that when they tried downgrading their ROMS, their XDA2 died....
you can try searching for other topics if there are information about downgrading... .so far, i dont have any problems with my 1.72 ROM...
except that there is no running program application which enables me to switch off any running program in the background.. but i easily remedied it by downloading TASKMANAGER.... its quite the same with running programs...other than that, so far, so good.
Error 121 Language ID Error
Hi,
after running HimaUpgradeUt.exe I get the message:
Error 121 Language ID Error (N-2-1-0-1), the ROM image that you are trying to use is not designed to work with your Pocket PC.
I ran ERedit2003 Version 1.2.20 and opened the file ms_.nbf using the password 0x20040305. I saved the file with the different language settings WWE, ENG and GER. Always the problem remains the same.
My XDA2 currently has ROM 1.66.01GER.
Thanks for help.
try to change the operator name , too! or use other hymalaya upgrade files, from other roms!
Re: Error 121 Language ID Error
GentleMan said:
Hi,
after running HimaUpgradeUt.exe I get the message:
Error 121 Language ID Error (N-2-1-0-1), the ROM image that you are trying to use is not designed to work with your Pocket PC.
I ran ERedit2003 Version 1.2.20 and opened the file ms_.nbf using the password 0x20040305. I saved the file with the different language settings WWE, ENG and GER. Always the problem remains the same.
My XDA2 currently has ROM 1.66.01GER.
Thanks for help.
Click to expand...
Click to collapse
hi, i tried encoding with it again.. please download it, replace the other files and try if it still gives you errors or not. thanks... ill be waiting for your feedback
Re: Error 121 Language ID Error > Error 120
Waxx said:
hi, i tried encoding with it again.. please download it, replace the other files and try if it still gives you errors or not. thanks... ill be waiting for your feedback
Click to expand...
Click to collapse
Hi,
Thanks. But now I get the message:
Error 120 Language ID Error ( N-1-8-1-8 ), the ROM image that you are trying to use is not designed to work with your Pocket PC. I tried with settings O2 WWE, O2 GER and O2 ENG.
When specifying CDL instead of O2 the error code changes to Error 120 Language ID Error ( N-1-8-8-8 ).
So the problem remains the same
Thanks for help.
Help for beginners: upgrading O2 Xda II to ROM 1.72
New to Forum-sorry to be slow on the uptake. I am trying to undersand how to upgrade O2 Xda II (ExROM 160.50) to ROM 1.72 without losing the machine. Waxx says you need to reconfigure the ISP settings (I assume because they are lost in the upgrade). I cannot find O2 settings for GPRS Interenet and MMS on the net. Talking to O2 is a waste of time.
Does anyone have a step by step description that results in ROM 1.72/Radio 1.18 (or lower if 1.18 still in beta) working on O2 Xda II?
Has anyone reported doing it sucessfully. Have non recoverable failures been reported?
RamyG
Just copy the attached CAB file across to say, My Documents on your XDA, and run it via FileManager.
It will customise your O2 XDA II with all the correct settings.
Once it has done that (and you've tested it works), just uninstall the O2 Active bit and your settings will remain (well they did on mine)
BTW - I upgraded to the new ROM, and have had no problems at all ! Very sweet
Mark
Thnx Mark, just to make sure before I jump in: the steps are:
(1) upgrade to 1.72 using Waxx's attachement (is that the file you used?) (2) follow the procedure you described and I will get O2 customised Xda II (same as where I started) but with ROM1.72 and later Radio Stack. Right?
2 questions:
(a) are the GPRS setting for MOBILE WEB (post paid)
(b) what benefits should I expect from the upgrade? (other than the satisfaction that it succeeded, l if it works?
thnx
RamyG
Yep I used the attachment from Waxx ...
The procedure you mentioned is correct ... I did have a few heart stopping moments after the upgrade because (like you) I couldn't find the necessary settings for GPRS etc .. but the O2 cab file re-installs everything back to what it should be for the UK.
You are prompted to choose relevant settings - in this case you get a choice from either post-paid (MobileWeb) or PrePay ...
As for benefits, people are reporting better bluetooth support, and better battery life. Only upgraded mine yesterday, so can't comment on either yet !
HTH
Mark
Has anyone else had problems charging overnight with the ROM version?
Got Error 120: Country ID error N-8-1-1-1
Hi all,
I am new member here. I did upgrade to ROM 1.72WWE and seems working fine. Because the PDA is idle, I try to roll back to ROM 1.60.44 eng. and got the country id error N-8-1-1-1. I tried to set the regional to English (UK) and English (US) but failed. Any comment? My XDAII is bought from Asia-HK. Thanks a lot.
Chris
Mark thnx for your help. For all those undecided souls I can report that Waxx's ROM 172 upgrade works fine for O2 Xda II. (BTW: it takes 3 times as long to upgrade as they say it does - it's 30 min for each of ROM ExROM and Radio modules).
Mark, O2.cab did not work as exepcted for some reason. When I ran it, it simple created a text file with O2 network config info and did not actually configure the Xda II. The info was correct and a manual config worked first time. Puzzled, I ran the O2 cab again but from another directory. This time I got the O2 spiral (I may have gotten the network configed again I can't know as I had previously configured it manually . The upgrade did lose the O2 dialer screen and reverted to the iMATE one. This is trivial. the Net is full of free attractive skins. e.g http://sourceforge.net/projects/pocketpc-apps/
Mark Peters- I thank you again.
RamyG
Hey there. I think this is in the right area, if not I apologize. This is my first attempt at using a phone from another service provider on my service.
a little background information..
Im currently on the tmobile network and have purchased a cingular 8525. I bought the 8525 used and it currently has wm6 as well as the following:
M 05
s 04
b 06
r 1.16
g 32.53.7018.01H
D 2.15
I have already run the HTC sim/cid unlocker. I have the phone recognizing the sim card and can make calls and receive calls. Im trying to install a tmobile rom onto the phone to get away from cingulars. I installed the latest version of activesync and am currently able to sync with my computer as well as browse my phone via my computer to add/modify files.
The problem i'm having is when I run the official tmobile 2.26 release rom (for the MDA) once I go past the first two steps of the process its attempting to connect to my phone and comes up with error 224 saying my pda is not responding. I have it plugged in via usb and it is showing as connected. I've checked the phone's usb settings and nothing appears wrong.
Does anyone have any insight to what I need to do to be able to install a tmobile rom to this phone? Would it already having WM6 cause any issues with trying to install a 2.26 rom for the MDA?
Thanks!
Before you brick your new toy go read the WIKI!!!!!!!!!!!!!!!!!!!
you have a new bootloader (HardSPL 1.40 if you used hermes unlocker v3a), and the rom you're trying to install uses a RomUpgradeUtility which is intended for old bootloaders (<= 1.09). Extract the NBH and use CustomRUU to flash it.
BTW, if you have a radio rom > 1.27 (with htc_boot 0108) the T-Mobile WWE rom available will brick your device because it has an old radio (1.05.02.00 with htc_boot 0106).
So if you want the T-Mobile rom the path should be:
1) Extract NBH from T-mobile upgrade exe file
2) use nbhextract to get all the rom parts
3) use nbhgen to create a new NBH file, containing only OS & ExtROM
4) Flash the new NBH with customRUU.
Read the wiki and the sticky threads on this forum before attempting to do anything, or you'll end up with a brick
I hope that you mean T-mobile MDA Vario II as opposed to the MDA which is a different phone that the Cingular 8525 (Herm100). You cannot install a ROM from a different phone type (through most install methods).
However, you can install ROMS designed for T-mobile MDA Vario II, Cingular 8525, Softbank X01HT, HTC TyTN (and it's other names; you are looking for TyTN form factor). See the wiki @ http://wiki.xda-developers.com/index.php?pagename=HTC_Hermes as previously mentioned or do a forum search via google @ http://www.google.com/advanced_search?q=+site:http://forum.xda-developers.com&hl=en&lr=&as_qdr=all
Be sure to read carefully about the process of upgrading ROMS before you upgrade it otherwise, your phone will be useless.
ryhian said:
Hey there. I think this is in the right area, if not I apologize. This is my first attempt at using a phone from another service provider on my service.
a little background information..
Im currently on the tmobile network and have purchased a cingular 8525. I bought the 8525 used and it currently has wm6 as well as the following:
M 05
s 04
b 06
r 1.16
g 32.53.7018.01H
D 2.15
I have already run the HTC sim/cid unlocker. I have the phone recognizing the sim card and can make calls and receive calls. Im trying to install a tmobile rom onto the phone to get away from cingulars. I installed the latest version of activesync and am currently able to sync with my computer as well as browse my phone via my computer to add/modify files.
The problem i'm having is when I run the official tmobile 2.26 release rom (for the MDA) once I go past the first two steps of the process its attempting to connect to my phone and comes up with error 224 saying my pda is not responding. I have it plugged in via usb and it is showing as connected. I've checked the phone's usb settings and nothing appears wrong.
Does anyone have any insight to what I need to do to be able to install a tmobile rom to this phone? Would it already having WM6 cause any issues with trying to install a 2.26 rom for the MDA?
Thanks!
Click to expand...
Click to collapse
I bought a new HTC Softbank X01HT phone from China and bought it back to New Zealand. I have successfully changed all the settings to NZ network, except quite often it won't ring when someone calls me... I have got sms/txt working, internet access working, i can make calls, and sometimes i can receive calls...
If i take the battery out and restart it, I get a message which says "Your current operator 53001 is not supported. You should obtain an update from your device vendor..."
The countries pre supported are Ausi, hong kong, INdo, Macau, Malaysia, Philippines, Singapore, Taiwan, Thailand..... but not New Zealand.
My ROM version s 1.23.707.4
Rom Date 07/21/06
Radio Version 1.16.00.00
Protocol Version 32.53.7018.01H
Model Herm200
Pocket PX
Vodafone have been no help as they say they don't support parallel imported items, nor were Imate, same reason, kind of expected that.
Any ideas? this phone is really cool, but if i can't receive calls or roam with it, its basically useless for me...
ROM upgrade?
upgrading your device's ROM (and radio ROM) will probably fix your problem.
you should COMPLETELY read the wiki here at http://wiki.xda-developers.com/index.php?pagename=HTC_Hermes and also Mr Vanx *excellent* upgrade guides at http://www.mrvanx.org/cms/
read BOTH before you try to upgrade or risk bricking your device. however, a ROM upgrade will probably fix your device.
does not seem like your device is SIM-locked (or else it wouldn't work at all with your SIM), but you might want to read http://forum.xda-developers.com/showthread.php?t=301952 nonetheless
Sounds like you've got one of the Dopod roms installed. There are a few things you can try before upgrading the rom and radio.
1. Ignore the message. Just install the operator settings for your carrier manually or with a pre-made cab file. Some of them are listed here http://wiki.xda-developers.com/index.php?pagename=Hermes_provider_cabs , others you'll probably have to search for.
2. If installing your own settings still causes a conflict try deleting the other settings or use Bandswitch to disable them.
3. Try a hard reset and then, just before the customisations start, do a soft reset. The stuff Dopod put in their extended rom won't be installed but you'll also lose the 'operator not supported' message. You'll also have to manually input your carrier settings.
4. Upgrade to one of the wm6 roms but, as SkyyBoy says, be careful. Definately run Olipro's hardspl 2.10 (hardspl v7) and read Mrvanx's guide before beginning.
Oh yes, could you extract the 'you got message' sms notifies and post it here. I think it's kind of cool, but I'm too lazy to downgrade my rom just to get it.
I've just downgraded to the same ROM as you and I'm fine sending and receiving calls using my O2 and Vodafone sim cards (both from UK). I'm currently in UK but have also used this rom in China without problems.
The only difference between your and my setup is that I currently have radio 1.38.00.10. Yours is 1.16.00.00 which is (I think) the radio which comes with pof's CID/SIM unlocker - because the original shipped radio with this rom is 1.06.00.10. This suggests that the phone is super CID (a good start).
The radio is a bit old (which could be the problem) so I'd suggest upgrading it to at least 1.27.00.00 - but you'll have to read the threads and do some experimenting to find the best one for you. You can get the radios here http://wiki.xda-developers.com/index.php?pagename=Hermes_ExtractedRadioRoms.
Before you upgrade the radio use olipro's hardspl 2.10 (V7) http://forum.xda-developers.com/showthread.php?t=296722. An error during radio upgrades is the quickest way to brick your phone and hardspl 2.10 will allow you an easy way to recover from this.
I am facing the same problem in order to add TIM Brasil, however I am not finding any cab file with the configurations
Someone could help me, please please?
For those of you who don't mind helping a noob
Some background info:
I own a german version of MDA vario2. I did unlock it using the hack from one of the commercial site http://www.imei-check.co.uk/. With some blind courage, I upgraded my rom to O2 (german) successfully yesterday. But that was before I learn about this site.
1) Now I'm trying to upgrade it to WM6 using the official HTC rom posted on this website (version 3.something). The process goes until the step where the rom will be upgraded. A window shows percentage bar comes up (0%) and then after a while, I get an error message 260 Connection (even though the device connected to activesync fine previously). The percentage number stays at 0%. Then the upgrade process ends. I tried many times but always get the same result. What have I done wrong? Hopefully I did not trash my device because of the O2 upgrade.
2) The reason I upgraded to O2 was because I messed up my MMS settings somehow. I thought I could upgrade to O2 and then change the MMS configuration manually t-mobile's config. But after the upgrade, MMS functionality disappears from the messaging program. (MMS disappears from the tree structure.. leaving on SMS and Email.) Does anybody know how can I add the MMS functionality back?
3) What is CID unlock and SuperCID? Does it have anything to do with my problem in (1)??? How to do it?
4) Where can I get buildos.exe and createrom.bat for the rom kitchen?
thanx any info you could provide.
Hello everybody.
I had installed "TouchFLO Charmer WM6_GER ver. 2.8 BETA by mschmitz" over an WM5 T-Mobile MDA compact II (Charmer) and everything worked great.
see link: http://forum.xda-developers.com/showthread.php?t=331142
Now i cooked my own ROM (Charmer WM6) with some improvements and correct working German Input methods.
see Link: http://forum.xda-developers.com/showthread.php?p=2075053#post2075053
As there are several "how-to" here but all are spread around this forum, i will try to give a checklist how you probably not kill your device.
Print this checklist and search the forum for the how-to's.
Prerequisitions:
If something goes wrong, be sure to have a ROM of your Phoneprovider (e.g. T-Mobile WM 5 AKU 2.2 for a T-Mobile device).
If you sdo not have an original ROM, you can use this one to flash back to WM5 (i used this, do not worry that it is english): http://www.tm-phonedownloads.com/files/RUU_Compact ll_2060227_20602110_021921_T-MobileUK_Ship.exe
Backup your data! All will be lost after upgrading, or if anything goes wrong. You can use Sprite Backup (the only tool that allows upgrading from different WM versions - eg. from WM5 to WM6 - but you wil loose SMS. Use PPCPIMBackup Freeware to backup SMS).
Always use the corrrect ROM (do not use e.g. a MDA III ROM on an MDA II)
I also recommend to delete your Active Sync Partnership after upgrade (Active Sync/File/Delete Mobile Device) and let Active Sync setup a new one (otherwise you may have problems with File sync, sometimes an error pops up).
If you have problems to sync with outlook, it might be a problem with the restored data of SPRITE BACKUP as WM5 has a different database than WM6.
In case you geet an error "Error 8007000e" or similar do the following:
1) Hard Reset
2) Do NOT connect to Active Sync !!!
3) Restore your personal data (If you use Sprite backup select Merge, Level 1 but do NOT select "Migration Data" whern you get the filetree)
4) On your PocketPC start the program "Active Sync" (still NOT connected to PC)!
5) Go to Menu/Options and DELETE the partnership (e.g. "Windows PC").
All Syncroniced data will be deleted on the PocketPC (Contacts, Appointments, etc..), but they are still available in OUTLOOK on your PC.
6) Thereafter delete your Partnership also on the PC (Active Sync - File/elete Mobile Device).
7) Now connect your PocketPC to the Desktop PC and the Outlook data will be syncronized again without error.
You can try to start at point 4) maybe you do not need a hardreset/backup again, try....
After upgrading you should always delete the partnerships....
-------------------------------------------------------------------------------------------
Now the upgrading steps. Make sure to check them all!
1) Unlock your device (CID and SIM). You have to CID unlock your device, or otherwise you cannot install a ROM that is e.g. not T-Mobile on an T-Mobile MDA.
How?
First of all you have to check what device (G3 or G4) and what Bootloaderversion (IPL/SPL) 1.x or > 2.x you have.
SOFT reset your device and note the red numbers that come.
If you have something like
IPL: 1.12 (or 1.12.000)
SPL 1.12.0000
you have an G3 device.
If IPL or SPL ends with 1 (e.g. 1.12.0001), you have an G4 device.
(0 is G3, 1 is G4)
Now check the first number.
1.12.xx is an Bootloader version 1 and 2.12.xx is 2, and so on.
I had an G3/Bootloader V1.x device, so I CANNOT say if it works for other devices.
For a G3 device you have to use Lockiwiz2b to SIM/CID unlock your device (http://forum.xda-developers.com/showthread.php?t=249474).
For a G4 device you have to use Lockiwiz3 to SIM/CID unlock (dont know if it works)
Its easier to unlock an 1.xx. device, so unlock before upgrading (even with an official ROM)
You will NOT loose your data as no HARD reset is necessary. Lockiwiz will not harm your system (if you do the right thing).
2) Now that you have CID unlocked your device, check your Bootloader Version. WM6 can only be installed with an V2 Bootloader (IPL/SPL 2.x.xxx) or higher!!.
So if you have e.g. IPL/SPL 1.12.xx, you first have to upgrade your device with a more recent WM5. I installed T-Mobile WM5 AKU 2.2 and thereafter i had 2.20.xx
3) WM6 cannot be installed over WM6 !!!
If you allready have a WM6 on your Charmer, DOWNGRADE to WM5, thereafter install the new or updated WM6!
4) Install ROM and enjoy.
If soething went wrong, you can save your device by going to Bootloader mode (push and hold camera button and reset with stylus. When you see the 3 colored Screen, release Camera Button. Then you are in bootloader mode and you can flash the original ROM vie your PC and ActiveSync (thats why you should have a WM5 ROM by the hand)
Summary:
1) Check what device you have (G3/G4)
2) Check what Bootloader Version you have (1.xx.xx or > 2.xx.xx)
3) Unlock CID (and SIM) with Lockiwiz02 (G3) or Lockiwiz03 (G4)
If this did not work, STOP here and forget it, nothing is lost until here! If your device is not CID unlocked you will kill your device with a "non vendor" ROM
4) If your bootloader (IPL/SIP) is 1.xx.xx, first upgrade to 2.xx.xx via an official WM5 ROM upgrade (or check XDA-Developers ROMs), otherwise device is dead
5) If you allready have an WM6 on your device, downgrade to WM5 first!
6) Install WM6 and enjoy.
Regards
Ridingshark
You dont need to CID unlock the device to upgrade to WM6. In fact, CID unlocking works only on 1.xx bootloader, and once you've bought a device with 2.xx, you can't go back.
That's why, instead of cid unlocking, you can just use NO_ID RUU, which bypasses checking the VendorID in the flashing process. You can find it here: http://www.windowsceportal.hu/tartalom/programok/htc_charmer_upgradeut_noid.zip
Other than that, its a great thread. Making it sticky.
"WM6 can only be installed with an V2 Bootloader (IPL/SPL 2.x.xxx)!!."
Add: WM6 can be installed with an V3 Bootloader (IPL/SPL 3.x.xxx also
tuecan said:
"WM6 can only be installed with an V2 Bootloader (IPL/SPL 2.x.xxx)!!."
Add: WM6 can be installed with an V3 Bootloader (IPL/SPL 3.x.xxx also
Click to expand...
Click to collapse
Thanks, i changed it to V2.xx or higher (thats what i meant).
Tahnks also to vlodeck for the hind how to with V2.xx devices.
As i said, i can only tell you how it worked for me (Version 1.xx)
Regards R
Where can I find Lockiwiz3 to download?
I recommend lokiwiz2b instead of 3.
http://forum.xda-developers.com/showthread.php?t=249474
A FAQ for flashing vlodeck´s ROM, can you Download here
It is in English and German language with pictures
Can I Upgrade My BenQ P50 which is based on WM2003 to WM5/6?
Can I Upgrade My BenQ P50 which is based on WM2003 to WM5/6?
Can Anybody help out me with this fact or give me some information you know.plz.......
vlodeck said:
You dont need to CID unlock the device to upgrade to WM6. In fact, CID unlocking works only on 1.xx bootloader, and once you've bought a device with 2.xx, you can't go back.
That's why, instead of cid unlocking, you can just use NO_ID RUU, which bypasses checking the VendorID in the flashing process. You can find it here: http://www.windowsceportal.hu/tartalom/programok/htc_charmer_upgradeut_noid.zip
Other than that, its a great thread. Making it sticky.
Click to expand...
Click to collapse
I would like to do it this way but I don't know how get nk.nbf for Charmer_Touch_ver._2.1 . Any help? Thank you in advance...
Your thread is very nice and help me a lot
Can you help me to upgrade bootloader from 1 to 2
Thank you very match in advance...
amoor1 said:
Your thread is very nice and help me a lot
Can you help me to upgrade bootloader from 1 to 2
Thank you very match in advance...
Click to expand...
Click to collapse
Hello amoor.
I also had Bootloader version 1 and simply used the official AKU 2.0 upgrade from T-Mobile from their homepage.
Thereafter it was Bootloader Version 2.
If you do not have an original ROM, you can use this WM5 (Do not worry that it is in english): http://www.tm-phonedownloads.com/files/RUU_Compact ll_2060227_20602110_021921_T-MobileUK_Ship.exe.
Thereafter you can upgrade to WM6.
Regards R
hey, is there a known problem with the rar archive? i always get a crc error when i want to extract the os.nb file using "wm6" as pass
Thanks a lot! It works!
... I just upgraded my Charmer's ROM following your instructions. Perfect!http://forum.xda-developers.com/images/smilies/smile.gif
vlodeck said:
That's why, instead of cid unlocking, you can just use NO_ID RUU, which bypasses checking the VendorID in the flashing process. You can find it here: http://www.windowsceportal.hu/tartalom/programok/htc_charmer_upgradeut_noid.zip
Click to expand...
Click to collapse
this link doesn't work anymore !! please upload it somewhere else
HTC Charmer noid
HTC Charmer noid
Hello,
I have WM6 to installt on my mda compact 2. How bekome I the language in German? Under regional Settings I Have German Others, but the language ist in english.
Thank you for your Answer.
The Menue is in english but the date was in german.??
Why don't you just install a German ROM by Ridingshark or Cyberdel. Then it will be German.
30.53 MB of storage -> OK - after UNhide -> ActiveSync Problem
Hello,
yes it works!!!! 30 MB storage - perfekt - Thank you.
Bevor UNhide 14 MB storage - but ActiveSync works perfect
After UNhide 30 MB storage - Active Sync dosen´t sync!!
Bevor and after unhide the same ROM (WM ROM 6.5 German (CTRLPDA))
all programs work fine BUT SYNC with ActiveSync dosen´t work.
ActiveSync tells me NO MEMORY on device?!?!? I can not sync any caleder or contacts!
Why?
Sorry for my bad english!!!
Greetings from Germany
seit1999
Who is CTRLPDA? Is it a forum member? We can't help you supporting ROMs not made in the forum cause we don't know the base then.
And what did you unhide? The extROM or what?