I'm looking for any 'working' fax software for my Qtek 2020 with 1.72 ROM installed. Anyone knows something about it?
You may try KSE Truefax latest version (2.08 Pocket PC Phone)
Thank you for your advise, but I have already tried that one. After downloading, I get message that is not valid software for my device. Any other possibility?
I had the same problem. But today I downloaded the latest version from their site...and it worked!!
I have an i-mate 1.72.
I have tried today, too, but result was the same. Can you give me exact link from which you downloaded it succesfully?
Did you actually send or recieve a fax?, I ask because i have just installed the latest version and whilst it installs no problem, i cannot select the modem in the xda2 because it isnt in the lists options ?
You have to install the latest 2.08 version for XDA II, from the website www.ksesoftware.com
It is the last one on the list.
Now, to be honest, since yesterday I've been trying to send faxes (not receive). I don't know why, but sometimes it succeeds and sometimes (more), it hangs.
By the way, you don't have to make any settings for the modem in this version, because it is already fixed to internal moden on XDA II.
KSE fax software works only with some ROM vers. I'm sure... this software doesn't work with 1.66. Maybe works with 1.72....
Bye, M.
My experience in TrueFax is my Mobile provider boarded the transmission of fax. Thus, I can't get and sent fax unless I paid them for the fax service.
Few days ago, I`ve bought that software (Truefax 2.0 Phone Edition II). I have installed it successfully and start sending faxes with no problems, but even I have special fax number from my provider, cannot receive faxes. It starts well (screen: "waiting for incoming call", then "answer"), you can hear the "fax signal" from the other`s fax speaker, but at that moment transfer is stopped and "no carrier detected" is displayed.
I wrote about this problem to '[email protected]' and now waiting for their respond. Anybody have a solution?
Related
my first post and contribution.. hopefully it would be alot of help to other people..
this is the official IMATE 1.72 ROM...except that it was encoded to work with O2 XDA2 units
added the O2 splash screen to retain the O2 bootup image -just load O2.cab into your XDA2
the upgrade utility shouldnt show you any more country ID error for O2 XDA2 units.. if there are problems.. holler me ASAP!!
feedbacks would be nice, coz i would like to make upgrades for other Network providers as well..
Thanks for that.
Can you show me a step by step guide on how to upgrade O2 xda 2 1.60.WWE version to this?
Thanks again.
ok... im not an expert yet, coz i just had my XDA2 for a week, but i do enjoy tweaking and playing with it.. besides, the knowledge i gain thru reading this forum is more than enough..
ok.. here goes..
1. create a full BACKUP your XDA2.. (but i dunno if this is helpful should you fail to upgrade your ROM)
2. download the above file and extract it.
3. you should see it extract 7 files.
4. put your xda2 in the cradle connected to the PC
5. run HimaUpgradeUt.exe
6. wait around 30-60 mins. then follow the procedure as shown on your computer. (a hard reset would be required)
7. after the upgrade is done, you should see the IMATE screen upon booting up (instead of the O2 bubble screen) if you wanne be extra sure, check your XDA2 version.if everything is ok, then you should have upgraded it correctly
8. if you want to revert to the old O2 splash screen during bootup, then copy O2.cab to your XDA2 and run it there. Do a soft reset, and voila, it should be back to the old O2 bootscreen.
I suggest that you contact your NETWORK PROVIDER because you will need to manually configure GPRS, MMS, and INTERNET settings on your xda2 after doing the upgrade.
WARNING: i wont be held responsible or liable for failed upgrade of your unit. Please understand that by agreeing to upgrade your XDA2, you are taking full responsibility of whatever untoward incidents that may occur to your XDA2. Flashing the rom might lead to DATA LOSS, SYSTEM MALFUNCTION, and even DEVICE MALFUNCTION.
but.. the rewards of upgrading it is sweet!
Many thanks for all of these description.
BTW, how do you feel the upgrade?
What you really get from this?
Can you share with us?
Thanks again.
Cheers mate.
i dunno, im just a week old newbie in using XDA2 :wink:
i just enjoy tweaking the XDA..so far, no problems here.
My xda2 currently is 1.66wwe. after upgrade to 1.72wwe, what's the different between it? anything increase? sorry because i'm a new bird
did a lil research.. so far, came to this...
The 1.72 ROM eliminates the majority of problems from the 1.66 ROM such as:
Increased battery drain
Device slows down
Bluetooth GPS devices don't work, even with Pocket Bluetooth Tools
Can it be downgraded back to O2 xda2 1.60WWE Rom?
Many thanks.
i doubt that it can be downgraded... i havent personally tried to downgrade my ROM to a lower version.. but there are other threads related to this, and they claim that when they tried downgrading their ROMS, their XDA2 died....
you can try searching for other topics if there are information about downgrading... .so far, i dont have any problems with my 1.72 ROM...
except that there is no running program application which enables me to switch off any running program in the background.. but i easily remedied it by downloading TASKMANAGER.... its quite the same with running programs...other than that, so far, so good.
Error 121 Language ID Error
Hi,
after running HimaUpgradeUt.exe I get the message:
Error 121 Language ID Error (N-2-1-0-1), the ROM image that you are trying to use is not designed to work with your Pocket PC.
I ran ERedit2003 Version 1.2.20 and opened the file ms_.nbf using the password 0x20040305. I saved the file with the different language settings WWE, ENG and GER. Always the problem remains the same.
My XDA2 currently has ROM 1.66.01GER.
Thanks for help.
try to change the operator name , too! or use other hymalaya upgrade files, from other roms!
Re: Error 121 Language ID Error
GentleMan said:
Hi,
after running HimaUpgradeUt.exe I get the message:
Error 121 Language ID Error (N-2-1-0-1), the ROM image that you are trying to use is not designed to work with your Pocket PC.
I ran ERedit2003 Version 1.2.20 and opened the file ms_.nbf using the password 0x20040305. I saved the file with the different language settings WWE, ENG and GER. Always the problem remains the same.
My XDA2 currently has ROM 1.66.01GER.
Thanks for help.
Click to expand...
Click to collapse
hi, i tried encoding with it again.. please download it, replace the other files and try if it still gives you errors or not. thanks... ill be waiting for your feedback
Re: Error 121 Language ID Error > Error 120
Waxx said:
hi, i tried encoding with it again.. please download it, replace the other files and try if it still gives you errors or not. thanks... ill be waiting for your feedback
Click to expand...
Click to collapse
Hi,
Thanks. But now I get the message:
Error 120 Language ID Error ( N-1-8-1-8 ), the ROM image that you are trying to use is not designed to work with your Pocket PC. I tried with settings O2 WWE, O2 GER and O2 ENG.
When specifying CDL instead of O2 the error code changes to Error 120 Language ID Error ( N-1-8-8-8 ).
So the problem remains the same
Thanks for help.
Help for beginners: upgrading O2 Xda II to ROM 1.72
New to Forum-sorry to be slow on the uptake. I am trying to undersand how to upgrade O2 Xda II (ExROM 160.50) to ROM 1.72 without losing the machine. Waxx says you need to reconfigure the ISP settings (I assume because they are lost in the upgrade). I cannot find O2 settings for GPRS Interenet and MMS on the net. Talking to O2 is a waste of time.
Does anyone have a step by step description that results in ROM 1.72/Radio 1.18 (or lower if 1.18 still in beta) working on O2 Xda II?
Has anyone reported doing it sucessfully. Have non recoverable failures been reported?
RamyG
Just copy the attached CAB file across to say, My Documents on your XDA, and run it via FileManager.
It will customise your O2 XDA II with all the correct settings.
Once it has done that (and you've tested it works), just uninstall the O2 Active bit and your settings will remain (well they did on mine)
BTW - I upgraded to the new ROM, and have had no problems at all ! Very sweet
Mark
Thnx Mark, just to make sure before I jump in: the steps are:
(1) upgrade to 1.72 using Waxx's attachement (is that the file you used?) (2) follow the procedure you described and I will get O2 customised Xda II (same as where I started) but with ROM1.72 and later Radio Stack. Right?
2 questions:
(a) are the GPRS setting for MOBILE WEB (post paid)
(b) what benefits should I expect from the upgrade? (other than the satisfaction that it succeeded, l if it works?
thnx
RamyG
Yep I used the attachment from Waxx ...
The procedure you mentioned is correct ... I did have a few heart stopping moments after the upgrade because (like you) I couldn't find the necessary settings for GPRS etc .. but the O2 cab file re-installs everything back to what it should be for the UK.
You are prompted to choose relevant settings - in this case you get a choice from either post-paid (MobileWeb) or PrePay ...
As for benefits, people are reporting better bluetooth support, and better battery life. Only upgraded mine yesterday, so can't comment on either yet !
HTH
Mark
Has anyone else had problems charging overnight with the ROM version?
Got Error 120: Country ID error N-8-1-1-1
Hi all,
I am new member here. I did upgrade to ROM 1.72WWE and seems working fine. Because the PDA is idle, I try to roll back to ROM 1.60.44 eng. and got the country id error N-8-1-1-1. I tried to set the regional to English (UK) and English (US) but failed. Any comment? My XDAII is bought from Asia-HK. Thanks a lot.
Chris
Mark thnx for your help. For all those undecided souls I can report that Waxx's ROM 172 upgrade works fine for O2 Xda II. (BTW: it takes 3 times as long to upgrade as they say it does - it's 30 min for each of ROM ExROM and Radio modules).
Mark, O2.cab did not work as exepcted for some reason. When I ran it, it simple created a text file with O2 network config info and did not actually configure the Xda II. The info was correct and a manual config worked first time. Puzzled, I ran the O2 cab again but from another directory. This time I got the O2 spiral (I may have gotten the network configed again I can't know as I had previously configured it manually . The upgrade did lose the O2 dialer screen and reverted to the iMATE one. This is trivial. the Net is full of free attractive skins. e.g http://sourceforge.net/projects/pocketpc-apps/
Mark Peters- I thank you again.
RamyG
Hello everyone!
I recently upgraded my Cingular 8125 (G4 version) to WM6 Farias edition. I've also installed the radio rom version 02.61.11 but noticed that at times call do not come in and when voicemails are left i do not get a notification. Dont know if its due to the radio version i'm running so i decided to ask the rest of Cingular 8125 users to see if they have a radio rom that may be more stable.
I also noticed that GRPS disconnects when a call comes in and it re-connects when the call its released. I've heard of certain radio roms that actually stay connected while the phone its been used... anyone knows which one will that be?
Thanks in advance!
Will V.
WillJV said:
Hello everyone!
I recently upgraded my Cingular 8125 (G4 version) to WM6 Farias edition. I've also installed the radio rom version 02.61.11 but noticed that at times call do not come in and when voicemails are left i do not get a notification. Dont know if its due to the radio version i'm running so i decided to ask the rest of Cingular 8125 users to see if they have a radio rom that may be more stable.
I also noticed that GRPS disconnects when a call comes in and it re-connects when the call its released. I've heard of certain radio roms that actually stay connected while the phone its been used... anyone knows which one will that be?
Thanks in advance!
Will V.
Click to expand...
Click to collapse
The T-Mobile 2.19 radio is the one that most use to alleviate missed calls/voicemails. The newer ones have benefits to signal aquisition and signal strength over this and stock radios, but what good does that do you if the calls and voicemails dont come through
There are some on Cingular in the US that have radios above 2.19 working with no issues but they seem to be few and far between.
I have also not had any issues at all with the 2.61 radio with Faria's rom in my signature. How well it works with other roms I don't know as I haven't flashed my wizard since I flashed that combination on it. My wife uses it now and has had no call issues.
Thanks Zzan!
I downloaded the tmobile 02.19.11 radio and tried to flash my phone with it but got the following error message:
ERROR [300]: INVALID UPDATE TOOL
This update utility cannot be used for yoru PDA phone. Please get newer update utility.
I've gotten several replies from other Cingular 8125 users who like you have told me it'll fix my sms/voicemail problem.
I just tried installing Cingular_2.25.11_Radinly.zip and i got the same error message:
ERROR [300]: INVALID UPDATE TOOL
This update utility cannot be used for yoru PDA phone. Please get newer update utility.
I'm loving WM6 but the fact that some calls dont come in and I have to continously keep checking my voicemails to see if new vm came in pretty much sucks.... I'm considering going back to the stock rom since i cant get neither radio version to work on my phone...
WillJV said:
I just tried installing Cingular_2.25.11_Radinly.zip and i got the same error message:
ERROR [300]: INVALID UPDATE TOOL
This update utility cannot be used for yoru PDA phone. Please get newer update utility.
I'm loving WM6 but the fact that some calls dont come in and I have to continously keep checking my voicemails to see if new vm came in pretty much sucks.... I'm considering going back to the stock rom since i cant get neither radio version to work on my phone...
Click to expand...
Click to collapse
Have you tried running it from more than one computer? I have seen where this works for some people. Also try a soft reset of the phone and a reboot of the pc before attempting. If that doesn't work you can try booting straight to the bootloader then kicking off the install once you see USB in the corner. In any case you should be fine on WM6 if you can get the 2.19 radio to flash.
I just tried another PC here at work. I installed MS Activesinc 4.5 and tried flashing it with 2.19.11 but same error message.
I'll continue to try and post any progress (if any) LOL
I"m going to try reseting the phone and restarting the pc now.
Thanks for helping me out giving other suggestions.
Will V.
Done deal!!!
Finally got it to Flash using the Tmobile UK 02.19.11 version.
I replaced the ROMUpdateUtility_Wizard_NoID.exe with the one included in the WM6 Faria Step 4 folder.
Ran the update utility and it flashed the phone without a problem.
Time to test it but i've gotten several replies stating that it should be a lot more stable than the one i had.
Thanks again and hope the info above could help other users having the same problem.
brother.... So i have the same issue with my 8125 ..G4 with wm6...missed call and no notification for voicemail...
tried radio 2.69 farias ..still no use...
Have u been able to resolve it? please help me...Let me install the Tmobile UK 2.19 radio now....
please advice.....
I bought a new HTC Softbank X01HT phone from China and bought it back to New Zealand. I have successfully changed all the settings to NZ network, except quite often it won't ring when someone calls me... I have got sms/txt working, internet access working, i can make calls, and sometimes i can receive calls...
If i take the battery out and restart it, I get a message which says "Your current operator 53001 is not supported. You should obtain an update from your device vendor..."
The countries pre supported are Ausi, hong kong, INdo, Macau, Malaysia, Philippines, Singapore, Taiwan, Thailand..... but not New Zealand.
My ROM version s 1.23.707.4
Rom Date 07/21/06
Radio Version 1.16.00.00
Protocol Version 32.53.7018.01H
Model Herm200
Pocket PX
Vodafone have been no help as they say they don't support parallel imported items, nor were Imate, same reason, kind of expected that.
Any ideas? this phone is really cool, but if i can't receive calls or roam with it, its basically useless for me...
ROM upgrade?
upgrading your device's ROM (and radio ROM) will probably fix your problem.
you should COMPLETELY read the wiki here at http://wiki.xda-developers.com/index.php?pagename=HTC_Hermes and also Mr Vanx *excellent* upgrade guides at http://www.mrvanx.org/cms/
read BOTH before you try to upgrade or risk bricking your device. however, a ROM upgrade will probably fix your device.
does not seem like your device is SIM-locked (or else it wouldn't work at all with your SIM), but you might want to read http://forum.xda-developers.com/showthread.php?t=301952 nonetheless
Sounds like you've got one of the Dopod roms installed. There are a few things you can try before upgrading the rom and radio.
1. Ignore the message. Just install the operator settings for your carrier manually or with a pre-made cab file. Some of them are listed here http://wiki.xda-developers.com/index.php?pagename=Hermes_provider_cabs , others you'll probably have to search for.
2. If installing your own settings still causes a conflict try deleting the other settings or use Bandswitch to disable them.
3. Try a hard reset and then, just before the customisations start, do a soft reset. The stuff Dopod put in their extended rom won't be installed but you'll also lose the 'operator not supported' message. You'll also have to manually input your carrier settings.
4. Upgrade to one of the wm6 roms but, as SkyyBoy says, be careful. Definately run Olipro's hardspl 2.10 (hardspl v7) and read Mrvanx's guide before beginning.
Oh yes, could you extract the 'you got message' sms notifies and post it here. I think it's kind of cool, but I'm too lazy to downgrade my rom just to get it.
I've just downgraded to the same ROM as you and I'm fine sending and receiving calls using my O2 and Vodafone sim cards (both from UK). I'm currently in UK but have also used this rom in China without problems.
The only difference between your and my setup is that I currently have radio 1.38.00.10. Yours is 1.16.00.00 which is (I think) the radio which comes with pof's CID/SIM unlocker - because the original shipped radio with this rom is 1.06.00.10. This suggests that the phone is super CID (a good start).
The radio is a bit old (which could be the problem) so I'd suggest upgrading it to at least 1.27.00.00 - but you'll have to read the threads and do some experimenting to find the best one for you. You can get the radios here http://wiki.xda-developers.com/index.php?pagename=Hermes_ExtractedRadioRoms.
Before you upgrade the radio use olipro's hardspl 2.10 (V7) http://forum.xda-developers.com/showthread.php?t=296722. An error during radio upgrades is the quickest way to brick your phone and hardspl 2.10 will allow you an easy way to recover from this.
I am facing the same problem in order to add TIM Brasil, however I am not finding any cab file with the configurations
Someone could help me, please please?
Hi I have Prophet (Imate Jamin) CID Unlocked. I recently updated to WM6 using PDAVIET RoM v 4.0.0.0.4 (First updated to NVID version of WM5 AKU2.2t).
I have a peculiar problem,
a) I am not able to recieve any SMS's.
b) I am not able to send any SMS's thru the messenger system, however I can send SMS's thru alternate program (O2 SMS Plus)
Since I am able to send SMS's using the O2 SMS Plus Program, I don't think it should be a Radio Rom problem.
Any help would be appreciated!!!.
IPL 2.13.0001
SPL 2.20.0001
GSM/Radio Rom 2.47.21
Protocol Version 4.1.13.24
ExtRoM Version 4.0.0.0.4PDAViet
-----------------------------------------
Radio Version Before update was 2.20.21
Cheers
Rohan
Problem Solved
HI
Ii seems the problem was some kind of conflict because of the multiple mssging softwares.... O2SMS Plus & Pocket outlook.
The problem went away once I removed O2 SMS plus... learnt the hard (long) way had upgraded & downgraded 4-5 times b'fore I finally understood what the problem was...
Cheers...
Yeah.. that problem happens to me... i have removed the O2 and the problem was solved! =)
can sens and recieve SMS from CANADA but not from PERU
i have a X02HT Smarphone WIndows mobile 6 , softbank carrier
i was able to receive and send SMS from CANADA but i tried to PERU(51) but couldnt get it and even send
any ideas?
I'm using Atom with Kumara ROM.
I have the same problem.
I try to modify the registry, but it's only a temporary solve. Sometime the problem appear again.
After I read this thread, I remove O2SMS Plus, and the problem solved.
I just got an Siemens x56 off e-bay, it's unlocked and has wm2002. I'm looking to upgrade so that i can run the iphone skin/theme. Any suggestions as to what ROM i should upgrade to? I downloaded the bootloader but i'm not sure what Rom. It's AT&T branded but i'm using a cellphone company that not many people have heard of it's called UNICEL (they were just purchased by verizon).
ANY HELP ANYONE CAN GIVE IS GREATLY APPRECIATED.
THANKS A BUNCH
~nick
dont know anything about iphone skins as i find them as cool as fake tits
but 2003SE from here is pretty new guess thats a good bet
http://www.romkitchen.de/
Do you know the difference between wm2003SE and 2003 Final?
WM2003 final is just WM 2003 and WM2003SE is the SE-Version including the possibility to rotate the screen. For production use I suggest the WM2003 Final Version
Stefan
Ok, so i got the phone in the mail. It has
rom version 3.17.03 ENG
radio version A.20.10
Protocol version: 324e4
Model No.: PW10A1
IMEI:350314010360924
I put my sim card in and get no signal. Also, i found out i can't use active sync because i've got windows vista. however, windows vistas "windows mobile device center" only supports mobile version 2003 and up. I belive mine has one of the xda-developers versions of windows mobile.
I have an SD card reader so i can copy files directly to the card but i'm unsure how to boot the x56 to the card so i can install wm2003. My cell phone provider is a smaller company called "Unicel" they were just purchased by Verizon.
SOrry i'm such a newb. I really appreciate any help
http://wiki.xda-developers.com/index.php?pagename=Wallaby_HT_FlashSD
have to use xdatools to get the rom to the sd in the right format
xdatools tells me i have to have Activesync running. Activesync doesn't run on vista.
i guess it have to be don from a xp box then
surely you can get access to one or dual boot beside the vista
ok, i was able to use a friends laptop and get wm2003 final installed (thanks to lumpistefan's rom kitchen) I had a program that was on the x56 when i got it that was a GSM freq selector. needless to say that program is now gone and i can't get my phone to work. Does anyone know where i can download this program or if there's an other way i can change the frequency?
Thanks for all the help so far guys.
ok, so i read in the wiki about how to change the band by doing a soft reset to the bootloader. However upon further research i've found that my lame cell company runs on GSM 890. Does anyone know how i can get my phone to 890?