upgrades wont work - 8525, TyTN, MDA Vario II, JasJam Software Upgradin

Hi,
I just got my hermes / tytn yesterday and from the first hour on I try to get the device upgraded to wm6 or english (it came with a german image)
Here is the software versions i currently got on it after installing cid unlock and so on.
rom-version: 1.18.257.2
radio version: 1.16.00.00
protocol version: 32.53.7018.01H
extrom version: 1.18.257.106
I tried to upgrade it with RUU_Hermes_QTEK_WWE_2.11.255.1_102_6275_1.38.00.10_108_Ship
WM6_21005_GER_11500
The detection steps of the upgrade work fine. But as soon as the device boots in the bootloader it just stays at the 4 color screen with the following infos:
IPL-1.01
SPL-1.10.Oli
It doesnt start the upgrade and after a while the program on the pc gives me a connectionerror.
Can you help me to track down the error? I read around the wiki and forums but couldnt find anyone with that error.
Thanks and regards,
Passi
EDIT: just to add: I also tried to install hard SPL7 which didnt work because I get the following error when I start the application on the hermes:
Datei oder Assemblyname'System, version=2.0.0.0,Cultur=neutral' Publictoken=.......
Anyone seen that before?

1. Make sure your XP computer has .NET v2.0 or later installed to use CustomRUU.
2. Upgrade to HardSPL latest version
3. Extract the NBH file from the upgrade (use winrar or 7zip) & flash it using CustomRUU.

ok, that worked now. Only problem now is that the radio version of the image i used wont work and my tytn is stuck at the htc screen now. It shows no gsm for about 1 second at the beginning. I will try to reflash another vendor image using the smartcard method in about 10 minutes. Hopefully that will work.
Thanks and regards,
Pascal

I tried using the flash with sdcard method but somehow it wont work. My bootloader is SPL-1.04. I copied an nbh file over to the card, renamed it to HERMIMG.nbh and reset the device to enter bootloader. It shows loading for a part of a second and then returns to regular bootloader screen.
Any ideas what could be wrong or what could be done to flash the image with the sdcard method?
Thanks for any help,
Passi
Edit:
after reformatting my sd card with my pc i finally got the bootloader to recognize the image. Sadly, still no success at all. The bootloader recognizes the flash file but then gets stuck at the checking.... point. Is there any way around that? Im really out of ideas.

Closing this thread as you already posted in the right one:
http://forum.xda-developers.com/showthread.php?t=286755

Related

Model No. says H instead of HERM200

He Guys,
Just my luck I have bought an HTC Tytn with the original Dutch rom and sim unlocked second hand.
I wanted to put a new Dutch rom from HTC on it but I keep on getting the ERROR [244] : INVALID MODEL ID but what I don`t understand is I have used the original Dutch rom from HTC. So I checked the device information and under the tab identity it says;
Model No.: H
Platform: PocketPC
IMEI: xxxxxxxxxxxxxxxxxxx
Shouldn’t the Model No. be HERM200?
Has anyone any suggestions in how I can solve this problem so I can flash any rom I wish.
I have tried al the cid unlock programs I could find and in bootloader it says;
H
IPL-1.01
H
SPL-1.40.Olipro
Thanks in advanced.
Use RAR to unpack the Original Dutch ROM.
Take the NBH file that you get when you unpack the ROM.
Put it in a folder with CUSTOM_RUU from Olipro.
Run CUSTOM_RUU and it will load up the ROM from the NBH file, bypassing the CID check. Should work
Thanks for the reply,
I have tried what you suggested but I still get ERROR [244] : INVALID MODEL ID I have also read these posts http://forum.xda-developers.com/showthread.php?t=322231&highlight=CUSTOM_RUU+from+Olipro and http://forum.xda-developers.com/showthread.php?t=322119&highlight=CUSTOM_RUU+from+Olipro and http://forum.xda-developers.com/showthread.php?t=309707&highlight=CUSTOM_RUU+from+Olipro and tried these suggestions but every time I get the error message. The radio update process was the same for me it will go to 7% and then give the message ERROR [244] : INVALID MODEL ID.
I have also tried the HTC_Hermes_SIM_CID_Unlock_v3a and Hard-SPL-V7 but still get the error message.
I hope I’m doing something wrong if not then I hope you have a new suggestion.
Thanks in advance.
Please set your device in BOOTLOADER MODE and post here your IPL / SPL versions.
Junner2003 said:
Please set your device in BOOTLOADER MODE and post here your IPL / SPL versions.
Click to expand...
Click to collapse
Did you read first post?
VivaErBetis said:
Did you read first post?
Click to expand...
Click to collapse
Ups, missed the bottom - thought it is the signature already! Sorry, haven't had my coffee yet!
Well, looks like the device is CID unlocked!
How about trying to flash an entire cooked ROM?
i would suggest the following:
flash a cooked rom (any)
see if that makes any difference to your model id
then try and flash the native dutch rom
good luck
Hi Guys,
As you suggested I tried a cooked rom the Hermes_WM6_vanilla still get the same error message when I put my device manually in boot loader it shows;
H
IPL-1.01
H
SPL-1.40.Olipro
But as soon as I try an official or cooked rom it shows;
H
IPL-SSPL by des
H
SPL-1.09.ds
I’m now trying Schaps_WM6Pro_WWE_4.00_Full_Beta3.exe and choose for auto detect and it said 1.40 Olipro and in boot loader it shows;
H
IPL-1.01
H
SPL-1.40.Olipro
And after 1% I got the ERROR [244] : INVALID MODEL ID message again.
I think my options are getting slim.
Your ModelID is stored on NAND and can be edited quite trivially (mostly).
how it got corrupted I don't know, however, the important question is; can you get into the OS?
He Olipro,
The device it zelf works perfect I can go anywhere I want even in the OS.
Just lead the way.
Changing Model ID
I have a similar problem in that my Model ID got corrupted during a radio upgrade. I now get the same error (244) and am stuck on SPL2.10 and can't downgrade to fix it. Can anyone tell us how to manually change the model ID in the NAND?
Much appreciated.
Dumping NAND
Ok, I'm a relative newbie so appologies before I get flamed. Thanks Olipro for giving me a clue.
I have now got spl 2.60 on my device but am unsure how to dump the NAND. I've worked out how to dump the 3 partitions from the device to dump the OS but am still unclear which part of the device is the NAND. I've read the Wiki on the memory map but am still not too sure.
Anyone able to give me simple instructions to dump the NAND and once I've done that where abouts is the ModelID stored? Do I do this using mtty?
Thanks in advance.
http://forum.xda-developers.com/showthread.php?t=322225
NAND Dump
Thanks Drummer for pointing me in the right direction.
Ive done this bit:
BTW, if you want to do a full backup of you FULL eeprom nand at any time, connect as before and type these commands:
plink HERMES > full.nb (hit ENTER twice)
task 32 (hit ENTER once and only once from now on after every command)
password 0000000000000000 - My device password is BsaD5SeoA which I used instead.
set 1e 1
rbmc me.txt 50000000 7fff800
watch your file grow to 128 MB.
It creates a full.nb file but it stays at 1k!!
** Note I have copied the bootloader file for spl 2.60 on my Hermes and ran that so I can now use that versino instead of the 2.10 thats on my device if that makes a difference and have tried with no joy with either version. Yes I know it says to use 2.30 but I can't work out how to get that on my device due to the ModelID error.
The Model number is contained within the herm1.nb file that was posted by BusStop in that thread. No need for complete NAND reflashing, only that section. You'll see it using a Hex Editor. You should write down your WiFi MAC addess, so you can edit it before flashing the file with the corrected Model number. Now you just have to figure out how to get SPL 1.01 MFG on your device...
Thanks Drummer. I did try flashing the herm1.nb file but of course as I do not have SPL 1.01 MFG it gievs an error. I'll keep trawling through the site and see if I can work out how to get SPL 1.01 onto my device. I'm not going to let this damn device beat me.
Ok so I worked out how to get the ModelID using getdevicedata. Used nbhtool to create a vaild nbh using the ModelID I'd just got and used the spl from 2.30 and it updated that fine.
Excellent.
However did the same with the MFG1.01 and flashed it and......
I now have a dead brick, no power and no response form usb. Time to get a replacement device.
Thanks for all the help I've had. I'm sure it should have worked.
1.) Remove battery
2.) Connect Hermes to charger or USB
3.) Insert the battery while Hermes is connected to charger
4.) Red light should turn Amber
5.) Soft Reset
Thanks for the advice Drummer however:
1.) Remove battery
2.) Connect Hermes to charger or USB
3.) Insert the battery while Hermes is connected to charger
4.) Red light should turn Amber - Nope red light goes out!
Mne shows HHHHHHH
Hi all, i've upgraded my radio and after my model id changed to H.
So, reading some posts i've used NBHTOOL.
1.I've decompiled an original Italian ROM
2.i've obtained a custom nbh selecting only OS and EXTROM and changing my Model number.
3. after that i've flashed the nbh resulting into a write error at 84% and a bricked htc.
Luckily i was able to reflash roms and i processed to second experiment.
I've made a custom rom with only the os, and it WORKED!
so my questions are:
1. can i use my htc even if my external rom isn't flashed (it cames from an old Schaps 4.0 succesful flash)
2. It is safe to proceed installing bootloader SPL using the nbhtool like i did with the os?
In that case i will be able to fix the model id problem by flashinh spl 1.01 and using the wireless fixing method you posted..
Thanks in advance for your reply!
Hi
From my understanding the Ext rom is mainly used for carriers to install there specific addons and customizations so it shouldn't be a problem.
As you can see I did flash spl 2.30 using this method and it worked fine ti was only when something whent wrong flashing 1.01 that my problem happened but I think that may be that I used an nbs file instead of an nb file from what I've read since.
Good luck.
Edit: Just noticed someone on this thread has managed it by going straight ot 2.60 http://forum.xda-developers.com/showthread.php?t=322225

Radio Upgrade Help

Hi I know its been asked for number of times but I can't find the correct answer for this.
I wish to upgrade my radio version to ATT latest radio (HERM_Radinly_1.54.07.00). I have it downloaded from wiki and trying to follow the instruction.
1. Extracted HERM_Radinly_1.54.07.00_CustomRUU.rar.
2. Disabled Active Sync.
3. Entered in Bootloader. Phone connected to machine. Its in USB mode now.
4. Now when I run RUUWrapper.exe, I get a screen where I have to make some selection. And here I need some help. There are following options,
a.SPL 1.01 MFG Bootloader
b.SPL 1.04/1.10 SPL 1.09 Bootloader
c.SPL 1.11/1.13/1/30/1.35/1.40 Bootloader
d.SPL 2.02/2.10 New Bootloader
b. Force Using SSPL
Check Box for Is HardSPL?
Now if some one can help me to find out correct option in the list, I can move further. My current SPL and IPL are in my signature. As far as I remember I have HardSPL done too.
Any help will be really appreciated.
Thanks -nbhor
nbhor said:
Hi I know its been asked for number of times but I can't find the correct answer for this.
I wish to upgrade my radio version to ATT latest radio (HERM_Radinly_1.54.07.00). I have it downloaded from wiki and trying to follow the instruction.
1. Extracted HERM_Radinly_1.54.07.00_CustomRUU.rar.
2. Disabled Active Sync.
3. Entered in Bootloader. Phone connected to machine. Its in USB mode now.
4. Now when I run RUUWrapper.exe, I get a screen where I have to make some selection. And here I need some help. There are following options,
a.SPL 1.01 MFG Bootloader
b.SPL 1.04/1.10 SPL 1.09 Bootloader
c.SPL 1.11/1.13/1/30/1.35/1.40 Bootloader
d.SPL 2.02/2.10 New Bootloader
b. Force Using SSPL
Check Box for Is HardSPL?
Now if some one can help me to find out correct option in the list, I can move further. My current SPL and IPL are in my signature. As far as I remember I have HardSPL done too.
Any help will be really appreciated.
Thanks -nbhor
Click to expand...
Click to collapse
You are right, this has been asked a number of time... . May i suggest another method to load your rom?: SD card. You do not need to use a USB connection (no risk to loose it) nor a PC and it works perfectly.
1> format a sdcard in FAT32 (use a card of max 2GB)
2> copy the .nbh file to it (Preferably the only file on the card)
3> rename the file: HERMIMG.NBH
4> insert the card and push: OK-POWER-SOFT RESET (to go to the 3 colors screen). It will detect your hermimg file (says "loading" in blue) and describe the content
5> follow instructions on screen.
And that's it ! Just note that flashing a radio rom is slow. This means that you will have the impression that it stops time to time. Just be patient
Oh... by the way, having tried nearly all radios available, 1.47 is for me the best compromize between battery drain and performances (at least in my area). But, once again, this is a matter of taste. Make your religion
Thanks a lot. Actually I have followed the same process while upgrading from WM5 to vp 3G's WM6. But I was not aware that I can use same process to upgrade the radio only. And to my surprise it worked like a charm. Appreciate your help in this matter. I will update you with my experience on this radio version.
Thanks -nbhor
Hi Guys,
I am having the usual radio issues atm, no version showing etc.
I have gone through the wiki and read the thread by POF on the issue and tried flashing a half a million times (ok maybe not but you know what I mean :-0)
So here is my issue now, I would love to try flasing via SD but mine just won't do it, doesn't even ask a damn thing once in bootloader, just sits there.
I am running 2.10.olipro loader and IPL 1.04, should this work for doing radio updates or any updates off the SD card? I can read it fine and copy dump to it from both PC and PDA and I have tried to working cards aswell. Any ideas?
Cheers Glenn
Ps I just noted that nbhor is running exactly what I am running and it worked ok for him - WTF?
terminatermule said:
Hi Guys,
I am having the usual radio issues atm, no version showing etc.
I have gone through the wiki and read the thread by POF on the issue and tried flashing a half a million times (ok maybe not but you know what I mean :-0)
So here is my issue now, I would love to try flasing via SD but mine just won't do it, doesn't even ask a damn thing once in bootloader, just sits there.
I am running 2.10.olipro loader and IPL 1.04, should this work for doing radio updates or any updates off the SD card? I can read it fine and copy dump to it from both PC and PDA and I have tried to working cards aswell. Any ideas?
Cheers Glenn
Ps I just noted that nbhor is running exactly what I am running and it worked ok for him - WTF?
Click to expand...
Click to collapse
As far as you can still flash, the method explained above should work
terminatermule said:
Hi Guys,
I am having the usual radio issues atm, no version showing etc.
I have gone through the wiki and read the thread by POF on the issue and tried flashing a half a million times (ok maybe not but you know what I mean :-0)
So here is my issue now, I would love to try flasing via SD but mine just won't do it, doesn't even ask a damn thing once in bootloader, just sits there.
I am running 2.10.olipro loader and IPL 1.04, should this work for doing radio updates or any updates off the SD card? I can read it fine and copy dump to it from both PC and PDA and I have tried to working cards aswell. Any ideas?
Cheers Glenn
Ps I just noted that nbhor is running exactly what I am running and it worked ok for him - WTF?
Click to expand...
Click to collapse
Hi Glenn this happened with me for couple of times too. Didn't ask anything in boot loader.Then I went back to board and did as this thread says http://wiki.xda-developers.com/index.php?pagename=Hermes_SDCardFlashing and this helped. May be this will help you too. All the best.
Thanks -nbhor
Hi nbhor,
Thanks for that, I had read that thread but not stressed much about preparing the cards, a format and error check (which ti my amazment found bad sectors on two brand new transflash cards sorted it and it now tries to flash but still fails unfortunately. Oh well looks like no radio for me again :-(
Cheers Glenn

Error 260

Just got Hermes vodafone with German language and successfully loaded hardspl and have it in supercid. Now i want to upgrade to english version, but i keep getting error 260. PDA stays in RGB mode and saying USB. If i disconnect the cable it switches to Serial.
I have tried to update with
vodafone 1.20.161.6 aku 2.3
vodafone 2.07.161.1 aku 3.3
htc 1.35.255.102 aku 2.3
they all report the same. Have tried rebooting computer as said in wiki, but no success.
i now use original
HERM200
ROM 1.20.126.3
RADIO 1.16.00.0
any idea?
Thanks
Are you sure it is a supercid? Write the SPL, can you boot os?
Yes, i can boot os fine.
SPL-1.40.Olipro
IPL-1.01
I did supercid procedure with success....at least i thoughts so. It's my fist upgrade, so anything is possible. I used HTC Hermes SIM & CID Unlock - v3a
Thanks
I have the same problem with my second-hand JASJAM. The only way I can flash ROMs on my phone is by using RUUWrapper and select force SSPL and this always works well.
COME ON people!!!
A simple search would have remedied this...its been a topic so many times now!
The reason the official RUUs wont work correctly is because of the fact that HardSPL has been loaded, hence the SPL version isnt recognised, you gotta flash the official .nbh file using CustomRUU.
But first update to the latest version of HardSPL (see the sticky thread).
When you run the customRUU program select your SPL version (or use autodetect) and off you go!.
EDIT:: to get you started, Hardspl is HERE.....flash it.
then open the RUU with winzip or winrar and copy over the .nbh file into a folder.
download CUSTOMRUU.....run it from that folder with your device synced over activesync....select your SPL and voila.
Silly fella's. Its alright though I used to make the same mistake. I think im better friends with the search feature on here than I am with my real friends. You can always rely on the the WIKI or the search.
Thanks for help mrvanx i manage to flash with no problems now.
Promise to read more wiki next time
My problem was the same described in this post (too recent SPL).
I similar problem only difference is now phone wont go out of boot mode as its not recognised by active syn or in the rom update procedure.
Please help urgently cannot restore phone...and i dont know how
If you have Hard SPl V7 installed, try to re-install the rom, or a different one using the sd card method.
1. Format 2Gb or less sd card FAT32 and copy .nbh file onto it. Rename to hermimg.nbh .
2. Insert into Hermies and reset into bootloader, hold power, OK button under flywheel and reset with stylus hold all buttons in until you get to tri-colour (bootloader) screen.
3. Follow onscreen instructions...
Cheers...

I cannot update rom...

Hi there!
I read a lot in the wiki and am not now to windows mobile and upgrading (had an XDAII before.)
I bought a MDA vario II, containing WM5.
It had a simlock.
At first i wanted to install WM6 with the official t-mobile update and the unlock it.
I am using win XP, so no problems there.
Activesync found the vario, i started the update-prog... found the vario.. start.
then the vario turns off.
i tried this a few times, it turns off, active sync isn't connected any more. no update.
As the device had a simlock i used the unlocker provided here, it worked good, i can use my E-plus card now.
This worked nearly as the update (same style, but as the device went to some bootloader style in the meantime everything worked.)
I then tried again to install the official update, same thing.
It sometimes seems to be stuck in the tri-color start window when trying, i have so softreset it then...
Then i tried to upgrade via sd-card (tutorial from the wiki (http://wiki.xda-developers.com/index.php?pagename=Hermes_SDCardFlashing) ).
I extracted the files from the .exe update program.
I saw that the nbh file was too small to contain all the data, so i fetched the schnaps rom and extracted the .nbh fiel from there to updrage to this version.
EDIT: i also extracted the .nbh files from the internal RUU_inside.exe file and tried both.. doesnt work either.
The proglem is that the update doesn't start after softresetting.
Trying to start the bootloader ("start the bootloader (hold Ok button on left side and POWER button at same time and stick with stylus in RESET on bottom).")
brings me to the tri-color bootloader window.
It says:
HERM300
IPL-1.01
HERM300
SPL-1.40.Olipro
Serial
It does not start the updrage file...
what am I doning wrong?
I thought everything should work like this
Tahnks in advance!
Cholera
make sure the card is formatted to fat32, and you renamed the file to HERMIMG.nbh, you might also want to update your hardspl
I checked the type and saw that it was fat (16). I reformated the card and copied the image file once again on it.
I renamed it (again) and restarted with the bootloader.
a second or so it says 'loading' on a white screen, but after that it is again in the tri-color bootscreen as before.
This happens with all 3 tested romupdates..
I will try to update my hardspl to 2.10 Olipro tomorrow, when i am back at home..
will this really help??
Any other suggestions?

Hermes stuck boot mode

When i tried to install any firmware the progress stop at 11% and the Hermes only turn on in bootmode, any idea??
rmorera84 said:
When i tried to install any firmware the progress stop at 11% and the Hermes only turn on in bootmode, any idea??
Click to expand...
Click to collapse
I had that problem and few more with my Hermes.
While it didn't help me, this suggestion by ultramag69 may help you...
Use the sd card method to flash a new rom, instead of a USB cable/Windows computer.
1. Format a 2Gb or less sd card to FAT32, copy the large 50MB-90MB .nbh file onto it and rename to hermimg.nbh
2. Insert the card into your Hermes and reset to bootloader (hold OK & POWER and push RESET for a sec with the stylus)
3. If you haven't stuffed up the other steps, follow the prompts.
Hope this helps!
Just one other thing summoner, make sure you have Hard SPL V7 installed. Otherwise the ONLY rom I'd try flashing like that is the SHIPPED STOCK ROM. Its so the CID will be recognised and won't cause a brick.
rmorera84, unless you've installed Hard SPL V7 then find the SHIPPED STOCK ROM and flash that, anything else may permanently brick your Hermes.
If you have Hard SPL V7 (IPL 1.04, SPL 2.10 oli) then flash what you like...
Cheers...
- Installed latested Orange rom, that I know of - SPV_M3100_ROMUpdate_1007
- installed Hard SPL 7 & applied SIM unlock/super CID
- re-installed TNT TNT.19199_Professional_Hermes
The result is:
IPL-1.01
SPL-1.40.Olipro
I suppose I should upgrading the radio rom now!?
I am told don't try fixing what isn't broken - and it is working. 3G iNet, Phone, WiFi, BT - all good atm.
Or is there a particular update I should still install?
Thanks!
SUMM0NER, you're using an older, not so safe version of Hard SPL. The Hermes is downgraded to SPL 1.40 when you sim/CID unlock your phone. Best idea would be to re-install Hard SPL V7. Its a later version that seems less prone to problems when flashing.
Go back to the Hard SPL thread and get Hard SPL V7. I had the same thing happen to me when I unlocked the Hermes, nearly cost me my handset.
The steps are unlock Hermes, Install Hard SPL then upgrade OS.
Cheers...
Do I need to re-apply the OS rom file?
I just reinstalled Hard SPL7, now shows as IPL-104, SPL-2.10.Olipro.
Thanks!
My hermes only work whit this rom:Schaps_WM6Pro_ESN_3.54b-0808_Full
Because whit any other rom they stuck at 11%.
This is the info or the phone:
IPL-1.01
Spl-1.40.Olipro
Whit the first rom the htc boot but the phone funtion don´t work.
rmorera84, refer to my last post.
SUMM0NER, no. You have loaded the os, the reason you put Hard SPL V7 is if you want to upgrade the radio rom (not a good idea unless you are experiencing problems) or wish to change the os. Just means recovery is easier than if you didn't have it.
Cheers...
Many thanks ultramag69.
rmorera84 what branding is your Hermes (ie: Orange M3100, T-Mobile Vario 2, Vodeaphone V1605 etc...)?
Can I assume your Hermes is working right now?
If it is download and install HardSPL V.7 (attached to the bottom of the first post!)
Ones done verify that it installed correctly by holding the OK & Power button and pushing reset for a sec. The screen should display the coloured bars and say towards the centre: SPL-2.10.Olipro
It´s Cingular 8525, i could install the HardSPL V.7, now what rom i can flash??
You didn't confirm if it is working right now!?
If it is not working, try one of the official WM5 Cingular roms from this list. If that worked apply HardSPL 7 and take it from there.
Ones you downloaded the Cingular rom update you will have to keep unpacking the .exe files until you come to the actual .NBH file (WinRAR works for me).
Then follow ultramag69's instructions on flashing the rom via memory card.
Works, now i have this info:
HERM100
IPL-1.04
HERM100
SPL-2.10.Olipro
I download the official Cingular WM5 rom, but. i don´t know how install this rom by memory card, could you help me??
Excellent!
Try downgrading to the Cingular rom via USB. Just double click the EXE and follow the instructions.
To use the memory card method follow these steps...
0. unpack the .exe file containing the rom with Winrar (right-click exe then choose "Extract to...\")
1. Format a 2Gb or less sd card to FAT32, copy the large 50MB-90MB .nbh file onto it and rename to hermimg.nbh
2. Insert the card into your Hermes and reset to bootloader (hold OK & POWER and push RESET for a sec with the stylus)
3. If you haven't stuffed up the other steps, follow the prompts.
The reason to use the memory card to upgrade a rom, rather than a usb cable, is to cut down on failed upgrades (dodgy Windows/usb port/usb cable/etc..).
All working? Try upgrading to a Hermes rom that didn't work previously.
Any rom you can find in the Hermes section. Go to the WM06 part of the forum, theres a sticky at the top with about 50 older roms and you'll find other roms there too (latest is wm6.5).
Cheers...
i install the official WM5 AT-T version the WM6 AT-T, but, i still whit the no-gsm problem, can i flash i radio? or what i can do??
You may not be able to fix this, if you know what the original SHIPPED STOCK ROM was and can find it, then flash that. It may not work, if it gets stuck at 11% - 17% mark it means the radio ROM is stuffed and the memory area is corrupted. Not fixable.
You could also try, if you know what it is, the original radio rom by itself. Again, if you can't get it to work, you have a PDA but won't work as a phone ever again. Sorry to be the bearer of bad news.
Im to having the same problem, it keeps going back to the 2.1.Olipro boot loader.
I tried the memory card option and it starts to install but then stops.
Does anyone have and sugestions?
Cheers
Help Help
Hi, I got my Hermes 8525 in boot mode what i did is to install this Schaps_WM6Pro_WWE_4.00_Full.exe now my hermes is working but i want to unlock it..what can I do cos everytime i try got in to boot mode again..any help tks.,..

Categories

Resources