hi to all master , i have problem with my x01ht now , it show NO GSM and cannot flash radio , when flash radio it show 0% ... then i search around forum and i saw this , but it dont help , it show invalid password ! please help
Type the following commands (do not copy paste!!!)
USB> password 0000000000000000
USB> set 1e 1
USB> erase a0040000 c80000
USB> erase a0cc0000 c80000
USB> erase a1940000 640000
USB> set 1e 0
Cmd>password 000000000000000
Invalid password.
HTCSF kEØ(HTCEPassWord: 000000000000000
on new bootloaders password is "BsaD5SeoA"
But this will not help you unbrick your device.
Read here:
http://forum.xda-developers.com/showthread.php?t=286755
so bro pof can you guide me on how to fix? i had read around this forum for more than 12 hours , my head is pain now .... hope you can guide me in this post on how to solve
n/m.. answered my own question
Related
Hi,
First time : i'm sorry for my bad english,
I try a radio corrupt (not for my hermes-probably for 900). I would like change the corrupt radio. I try radio 1.16 but my hermes wait 30 minutes and my pc write "checking the information ..." and nothing.
In bootloader i can see :
Herm200
IPL.-1.01
and
Herm299
SPL-1.04
After change the first corrupt radio, I have a white screen and nothing .
I would like to put the original radio.
My Hermes is a SFR Wodafone 1605.
Thank you for you help
Sincerly,
YC
See "Problem 5: Device shows NO GSM when booting" on this wiki page:
http://wiki.xda-developers.com/index.php?pagename=Hermes_UpgradeProblems
Re
Ok prof ! I'se a good article :
"If you feel brave, and always at your own risk, what you should do to fix your bricked hermes with screwed radio is this:
1) Put your Hermes in bootloader mode
2) Disable USB connections in ActiveSync
3) Open mtty.exe and select USB port, then connect.
4) Hit enter twice, you will see the "USB>" prompt.
5) Type the following commands (do not copy paste!!!):
Code:
set 1e 1
erase a0040000 c80000
erase a0cc0000 c80000
erase a1940000 640000
set 1e 06) Reset your phone and put it back in bootloader mode
But 1 question :
How i can find a topic to make a rom without activsync
Thanks
Hello,
i try to flash bootloader 1.01 mfg according to http://wiki.xda-developers.com/index.php?pagename=Hermes_BootloaderMFG
It hangs after
USB> lnbs SPL-1.01.nbs 50020000
...
start NB image download
According to other threads this behavior exists if mtty can not find the file. But the file is in the same directory as mtty.
Does anybody has an idea what is wrong?
Thanks
Andreas
did you do the "Task 32" first? and if you did did you get "Level = 00"
yes, but i only one 0
USB>task 32
Level = 0
USB> lnbs SPL-1.01.nbs 50020000
i got some output at this point, but i cannot remember exactly
???
? 50020000
? 00000000
????
The last line was: start NB image download
My device is SuperCID. SPL 1.09
there's your problem then; you need SPL-1.04.
I suggest you load Hard-SPL and try again...
also, might I heartily recommend that instead you download my MFG pack and use SSPL with 1.01 rather than flash it to your device... or at least use my patched 1.01 (create an NBH)
I get that message whenever I do not type the name of the file correctly, like for example, sp1-1.01.nbs instead of spL-1.01.nbs (the latter being the correct spelling). Just my two cents..
I had 1.09 before, coz I updated with full RUU versions of roms (like 2.06.502.3 cingy or 2.05.255.1 HTC), and I had no problem to downgrade to 1.01 MFG and now to 1.01 oli... I also used mtty, device was supercid, used commands was
USB>task 32
Level = 0
USB> lnbs SPL-1.01.nbs 50020000
USB> task 8
If I remember correctly, task 8 automatically SW reset herm... maybe I am lucky one?
take a look at your mtty icon. Does it say MFC or does it look like a serial connector. If it says MFC then you have the wrong version of mtty.
my guess: it says "MFC"
Thanks for all your answers. At the moment a'm at work and cannot try your suggestions.
But i have some further questions:
>olipro: there's your problem then; you need SPL-1.04.
According to the wiki:
"This is a very special bootloader which can be flashed in any bootloader version BUT to flash it your Hermes must be SuperCID first..."
...can be flashed in any bootloader... what does this mean? i thougt i can flash it from 1.09. sinmae was able to do it. (or did i miss something)
>crazyut: wrong file name
i checked this several times. i typed the right name, but i do not now whats the working directory of mtty. i put the nb-file in the same directory as mtty and startet mtty from a dos-prompt. so this should be ok.
>Sleuth255: wrong version of mtty
i tried to investigate this yesterday. somebody said he has version 1.11a. i have version 0.01. it says MFS. so this should be the problem. but this is the version from the wiki:
http://wiki.xda-developers.com/index.php?pagename=Hermes_BootLoader
http://wiki.xda-developers.com/uploads/mtty.exe
where can i get the right version? (at google i found mttty (3 t))
Thank
Andreas
Use the mtty.exe included in this pack, mtty and nbs file in the same dir.
I'd like to grab the Orange / T-Mobile splash screens to add to the ROM cooking customisation packs. I can see ow to flash a splash screen here but not how to dump one from a working 'Phone.
Any pointers?
Same is true of a Phone 'skin'. How do I dump that from a working phone?
If the splash screens you want are included on any shipped ROM, you just have to extract the Splash Screens from the NBH file, you can do that with NBHextract.
If you really want to dump them from the device, you can do it with 'rbmc' command:
- device has to be SuperCID (or use a SSPL/HardSPL)
- you have to authenticate to bootloader with the proper password
- After that, type
Code:
USB> task 32
USB> set 1e 1
USB> rbmc 500e0000 40000
USB> set 1e 1
USB> rbmc 50140000 40000
darrellr said:
Same is true of a Phone 'skin'. How do I dump that from a working phone?
Click to expand...
Click to collapse
This is the list of files for the phone skin, copy them from \windows and put them on a cab.
Code:
Bkgnd_Land.bmp Bkgnd_Port.bmp
brightbar_dn_l.bmp brightbar_dn_p.bmp
brightbar_l.bmp brightbar_p.bmp
brightbar_up_l.bmp brightbar_up_p.bmp
BtBtnDn_Land.BMP BtBtnDn_Port.BMP
BtBtnDs_Land.BMP BtBtnDs_Port.BMP
BtBtnUp_Land.BMP BtBtnUp_Port.BMP
EcBtnDn_Land.BMP EcBtnDn_Port.BMP
EcBtnDs_Land.bmp EcBtnUp_Land.BMP
EcBtnUp_Port.BMP EdBtnDn_Land.bmp
EdBtnDn_Port.bmp EdBtnDs_Land.bmp
EdBtnDs_Port.bmp EdBtnUp_Land.bmp
EdBtnUp_Port.bmp EsBtnDn_Land.bmp
EsBtnDn_Port.bmp EsBtnDs_Land.bmp
EsBtnDs_Port.bmp EsBtnUp_Land.bmp
EsBtnUp_Port.bmp IcBtnDn_Land.BMP
IcBtnDn_Port.BMP IcBtnDs_Land.BMP
IcBtnDs_Port.BMP IcBtnUp_Land.BMP
IcBtnUp_Port.BMP indialer_downdis_l.bmp
indialer_downdis_p.bmp indialer_downsel_l.bmp
indialer_downsel_p.bmp indialer_down_l.bmp
indialer_down_p.bmp indialer_lb.bmp
indialer_ls.bmp indialer_pb.bmp
indialer_ps.bmp indialer_updis_l.bmp
indialer_updis_p.bmp indialer_upsel_l.bmp
indialer_upsel_p.bmp indialer_up_l.bmp
indialer_up_p.bmp indialer_zoomsel_l.bmp
indialer_zoomsel_p.bmp indialer_zoom_l.bmp
indialer_zoom_p.bmp MaBtnDn_Land.BMP
MaBtnDn_Port.BMP MaBtnDs_Land.BMP
MaBtnDs_Port.BMP MaBtnUp_Land.BMP
MaBtnUp_Port.BMP MvBtnDn_Land.BMP
MvBtnDn_Port.BMP MvBtnDs_Land.BMP
MvBtnDs_Port.bmp MvBtnUp_Land.BMP
MvBtnUp_Port.BMP NmBtnDn_Land.bmp
NmBtnDn_Port.bmp NmBtnDs_Land.bmp
NmBtnDs_Port.bmp NmBtnUp_Land.bmp
NmBtnUp_Port.bmp predefined_image_female.bmp
predefined_image_male.bmp SbBtnDn_Land.BMP
SbBtnDn_Port.BMP SbBtnDs_Land.BMP
SbBtnDs_Port.BMP SbBtnUp_Land.BMP
SbBtnUp_Port.BMP SdBtnDn_Land.bmp
SdBtnDn_Port.BMP SdBtnDs_Land.BMP
SdBtnDs_Port.BMP SdBtnUp_Land.BMP
SdBtnUp_Port.BMP SfBtnDn_Land.BMP
SfBtnDn_Port.BMP SfBtnDs_Land.BMP
SfBtnDs_Port.BMP SfBtnUp_Land.BMP
SfBtnUp_Port.BMP ShBtnDn_Land.BMP
ShBtnDn_Port.BMP ShBtnDs_Land.BMP
ShBtnDs_Port.BMP ShBtnUp_Land.BMP
ShBtnUp_Port.BMP TkBtnDn_Land.bmp
TkBtnDn_Port.bmp TkBtnDs_Land.bmp
TkBtnDs_Port.bmp TkBtnUp_Land.bmp
TkBtnUp_Port.bmp UaBtnDn_Land.BMP
UaBtnDn_Port.BMP UaBtnDs_Land.bmp
UaBtnDs_Port.BMP UaBtnUp_Land.BMP
UaBtnUp_Port.BMP UvBtnDn_Land.bmp
UvBtnDn_Port.BMP UvBtnDs_Land.BMP
UvBtnDs_Port.bmp UvBtnUp_Land.BMP
UvBtnUp_Port.BMP VbBtnDn_Land.bmp
VbBtnDn_Port.bmp VbBtnDs_Land.bmp
VbBtnDs_Port.bmp VbBtnUp_Land.bmp
VbBtnUp_Port.bmp VCBtnDn_Land.BMP
VCBtnDn_Port.BMP VCBtnDs_Land.BMP
VCBtnDs_Port.BMP VCBtnUp_Land.bmp
VCBtnUp_Port.BMP VTBtnDn_Land.BMP
VTBtnDn_Port.BMP VTBtnDs_Land.BMP
VTBtnDs_Port.BMP VTBtnUp_Land.bmp
VTBtnUp_Port.BMP
For some reason when I use Mtty it shows cmd instead of usb, even though i connect with usb.
this is an example of what i see
Cmd>checkimage
IPL CRC checksum = 0xC1AC9D2F
SPL CRC checksum = 0xC27E0E42
CE CRC checksum = 0x7C63DA31
ExtROM CRC checksum = 0xA47162D9
Radio Image CRC checksum = Checksum: Wait interpreter timeout
0x0
Yes.... something is wrong with my Radio rom (i get the No GSM error), I am trying to fix it but I think this Cmd think may be a problem.
Cmd>password BsaD5SeoA
Pass.
HTCST ÚÈÒHTCEPassWord: BsaD5SeoA
Cmd>set 1e 1
Cmd>erase a0040000 c80000
HTCST ÚÈÒHTCE
Cmd>erase a0cc0000 c80000
HTCST ÚÈÒHTCE
Cmd>erase a0cc0000 c80000
HTCST ÚÈÒHTCE
Cmd>erase a1940000 640000
HTCST ÚÈÒHTCE
Cmd>set 1e 0
Is it supposed to look like that?
CMD> is normal, some versions show USB some show CMD
BTW, what does "Checksum: Wait interpreter timeout
0x0" mean?
http://wiki.xda-developers.com/index.php?pagename=Hermes_BootLoader
If you can't find it there, read:
http://forum.xda-developers.com/showthread.php?t=286755
It's long but everything you ever wanted to ask is there
drummer10630 said:
http://wiki.xda-developers.com/index.php?pagename=Hermes_BootLoader
If you can't find it there, read:
http://forum.xda-developers.com/showthread.php?t=286755
It's long but everything you ever wanted to ask is there
Click to expand...
Click to collapse
Yea, I searched but I found no help, I still get No GSM, so iv'e decided to sell my 8525 http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=180177608274
I can't flash SPL 1.04 over mtty.
Code:
USB>
USB>task 32
Level = 0
USB>lnb SPL-1.04.nb 50020000
Command error !!!
USB>
What is the problem?
igord said:
I can't flash SPL 1.04 over mtty.
Code:
USB>
USB>task 32
Level = 0
USB>lnb SPL-1.04.nb 50020000
Command error !!!
USB>
What is the problem?
Click to expand...
Click to collapse
PLEASE tell me why you are trying to do this outdated DANGEROUS operation??
Download duttys nbh tool, pack the .nb file into an RUU and do it using safe SSPL........messing with mtty can be a risky business.
Hi.
my phone mtty conection is not working...
When the mtty is open the only thing i see is: CLIENTCLIENTCLIENT
So, untill i get this thing working i can't try any more updates to bring alive my RADIO!!!
can anyone help me to configure the phone, or the MTTY?
THANXS!
cauboi25 said:
Hi.
my phone mtty conection is not working...
When the mtty is open the only thing i see is: CLIENTCLIENTCLIENT
So, untill i get this thing working i can't try any more updates to bring alive my RADIO!!!
can anyone help me to configure the phone, or the MTTY?
THANXS!
Click to expand...
Click to collapse
Did you disable Active Sync USB?
Yes, many times i check and unchek the "Allow USB..."
Which SPL do you have?
hi, my phone is:
At&t 8525
IPL 1.04
SPL 2.30
Radio (unknown, i don't remember but i gues it will be the orginal 1.54)
ROM 2.15.502.3 (04/09/07)
Thank you for reading!
You can't use MTTY with SPL 2.30, you need SPL 1.04, SPL 1.06 (no rtask command), but the best SPL to use with MTTY is 1.04.
igord said:
I can't flash SPL 1.04 over mtty.
Code:
USB>
USB>task 32
Level = 0
USB>lnb SPL-1.04.nb 50020000
Command error !!!
USB>
What is the problem?
Click to expand...
Click to collapse
you should flash SPL With RUU;MTTY command work with SPl. so the MTTY commands different form different SPL
Version.