Related
Any ideas? I tried searching the forum already but i can't get a it?
Start in bootloader mode, download mtty.exe and start it, connect via USB.
Then type "info 2" - without the quotes.
All info here:
http://wiki.xda-developers.com/index.php?pagename=Hermes_BootLoader
HmmmI`ve got this message:
HTCS11111111ĐŻ©îHTCEUSB
so it is locked or unlocked?..I have the SPL-1.04 and the Orange rom but have managed to installed the 1.27.00 radio rom withouth problems...but now I want to update the ROM with the SA one...
Regards,
Primoz
p.s. In the case it is not unlocked could I use the poh unlocker again?
Pc78 said:
HmmmI`ve got this message:
HTCS11111111ĐŻ©îHTCEUSB
Click to expand...
Click to collapse
This is a SuperCID, your Hermes is completely unlocked
hmmm.....
I have message HTCSuperCid..... is this ok? Only problem is that i'm stuck on 1.18 radio and i can't upgrade to any other version... When i want to upgrade i have error message but not after 10+ minutes, i've got it after minute or two
Bootloader is 1.09
please help
pof said:
This is a SuperCID, your Hermes is completely unlocked
Click to expand...
Click to collapse
Thx pof!...I was just on the way to write you a PM but you were quicker
Regards,
Primoz
franula said:
hmmm.....
I have message HTCSuperCid..... is this ok?
Click to expand...
Click to collapse
Yes this is OK too.
franula said:
Only problem is that i'm stuck on 1.18 radio and i can't upgrade to any other version... When i want to upgrade i have error message but not after 10+ minutes, i've got it after minute or two
Bootloader is 1.09
Click to expand...
Click to collapse
Read: http://wiki.xda-developers.com/index.php?pagename=Hermes_ExtractedRadioRoms
BTW, you will be able to use shipped 1.27 radio.
so when we get a message from info 2 that has HTCSuperCID in it then were safe to do whatever right?
@pof
I tried to upgrade to 1.27 radio and i have same problem
madmattco said:
so when we get a message from info 2 that has HTCSuperCID in it then were safe to do whatever right?
Click to expand...
Click to collapse
Yes, once it is SuperCID you are able to flash any shipped ROM in NBH format.
franula said:
I tried to upgrade to 1.27 radio and i have same problem
Click to expand...
Click to collapse
please READ: to flash an exctracted radio you need bootloader 1.04, your bootloader is 1.09. The radio 1.27 is offered in two different formats: shipped (NBH) file which you will be able to flash and extracted (NBF) file which you will not be able to flash unless you downgrade your bootloader to 1.04.
@pof (hi again LOL!)
From what ive read (see my sig am on 1.09) i cant use these upgraded radio ROMs, but if im not really having any unwanted issues is it even worth trying to downgrade to 1.04??
More to the point (im most probably wrong but...) to downgrade to 1.04 i must flash a different ROM, im happy with the HTC south Africa one?!?
mrvanx said:
From what ive read (see my sig am on 1.09) i cant use these upgraded radio ROMs, but if im not really having any unwanted issues is it even worth trying to downgrade to 1.04??
Click to expand...
Click to collapse
If you are happy with the 1.18 radio, and don't need to access the radio bootloader or AT command interpreter, you can keep 1.09 bootloader without problems. There's no difference in day-to-day use of the Hermes as a PDA/mobile.
mrvanx said:
More to the point (im most probably wrong but...) to downgrade to 1.04 i must flash a different ROM, im happy with the HTC south Africa one?!?
Click to expand...
Click to collapse
That's a way, but as I see in your signature your device is SuperCID, so to downgrade the bootloader you don't actually need to flash a full rom. The steps would be:
1. Flash bootloader 1.01 MFG
2. Flash SPL-1.04 from bootloader using 'lnb' if you don't want to keep the MFG.
You can do this without having to hard reset your device.
pof said:
If you are happy with the 1.18 radio, and don't need to access the radio bootloader or AT command interpreter, you can keep 1.09 bootloader without problems. There's no difference in day-to-day use of the Hermes as a PDA/mobile.
That's a way, but as I see in your signature your device is SuperCID, so to downgrade the bootloader you don't actually need to flash a full rom. The steps would be:
1. Flash bootloader 1.01 MFG
2. Flash SPL-1.04 from bootloader using 'lnb' if you don't want to keep the MFG.
You can do this without having to hard reset your device.
Click to expand...
Click to collapse
Sweet! Would it be a good idea to stick with 1.01 MFG if im planning on pursuing the GPS thing (IF we get past any risky stuff!), or even if i want to use some cooked goodies later on?
@mrvanx: Yes, it's the best one for playing with this kind of stuff
Please help Pof
pof said:
This is a SuperCID, your Hermes is completely unlocked
Click to expand...
Click to collapse
I am trying to establish the CID status for my TyTN.
I get the following code: HTCSQTEK_001ÖUSB>
I cannot see a thread where I can decypher it.
What is my CID status?
I am on bootloader 1.09 that came with the SA ROM.
Would like to upgrade the radio to 1.27
Thanks
basilrsa said:
I am trying to establish the CID status for my TyTN.
I get the following code: HTCSQTEK_001ÖUSB>
I cannot see a thread where I can decypher it.
What is my CID status?
I am on bootloader 1.09 that came with the SA ROM.
Would like to upgrade the radio to 1.27
Thanks
Click to expand...
Click to collapse
Your CID is the part just after "HTCS"
So in your case you get (from info 2) "HTCSQTEK_001ÖUSB" so your hermes is an English HTC branded device, your device is not SuperCID yet.
Check this post to see which it is (im only going by memory)
EDIT: I upgraded to the 1.27.00.00 radio yesterday, aslong as you use the signed released version (the first option on the related thread) you should be ok, dont use the extracted one. You MUST be SuperCID to upgrade the Radio (covering ones ass).
@basilrsa: Your CID is QTEK_001. Your device is CID locked with bootloader 1.09, you won't be able to flash 1.27 radio unless you downgrade your SPL to 1.04 first, either to continue CID locked and be able to flash extracted radio or to CID unlock and be able to flash shipped radio.
Thanks Pof
pof said:
@basilrsa: Your CID is QTEK_001. Your device is CID locked with bootloader 1.09, you won't be able to flash 1.27 radio unless you downgrade your SPL to 1.04 first, either to continue CID locked and be able to flash extracted radio or to CID unlock and be able to flash shipped radio.
Click to expand...
Click to collapse
Thanks for your info Pof, but how can I down grade to SPL 1.04
Sorry for the stupid question but all this is still new to me.
I will really appreciate it.
Thanks
basilrsa: read here:
http://forum.xda-developers.com/showthread.php?t=291827&p=1122696
http://wiki.xda-developers.com/index.php?pagename=Hermes_Howto_Bootloader104
Hi,
I'm getting the following string:
HTCSQTEK_H10é8Ã3HTCEUSB>
but I don't know how to decode it... Is this a super CID or not?
Thanks in advance!
Mogg
I've read and reread various posts about this. I just want to make sure I have the steps down before I go forward.
What I have now:
Cingular 8525
Rom: 1.34.502.1
Radio version : 1.16
SPL: 1.06
What I would like achieve:
Rom: 2.06.502.3
Radion version: 1.27
SPL: 1.04
Ext Rom: 2.06.502.3
1) Downgrade to SPL 1.04 by flashing the 8525 with file RUU_HER_Cingular_1.30.502.1_1.11.00.00_wwe_cws_ship.exe. This is because it matches my CID CWS__001 and it has SPL 1.04. I guess I simply run it without any other preparations. Is this correct?
2) Super CID and simunlock using HTC_Hermes_SIM_Unlock_v2a.zip
3) I choose the ROM RUU_Hermes_CINGULAR_WWE_2.06.502.3_6275_1.33.31.00_108_Ship.exe
4) Use NBExtract to decompress the above ROM to get files OS.nbf and Extrom.nbf file
5) Flash SPL 1.01MFG using mtty.exe. Is this necessary? Can't I flash OS.nbf with SPL1.04?
6) Flash OS.nbf file extracted using mtty.exe
7) Flash extrom.nbf file extracted using mtty.exe
8) Flash radio from file RUU_Hermes_TMD-TMA_Radiopatch_1.27.00.00_107_GER.exe by simply running it. Is this correct?
Am I missing something in the process?
Lastly, Is this the best COMBINATION of ROM, radio, and ext ROM? And how does RUU_Hermes_CINGULAR_WWE_2[1].06.502.3_6275_1.33.31.00_108_Ship compared to 2.05?
Thanks for any input.
5)
anubus12 said:
...
1) Downgrade to SPL 1.04 by flashing the 8525 with file RUU_HER_Cingular_1.30.502.1_1.11.00.00_wwe_cws_ship.exe. This is because it matches my CID CWS__001 and it has SPL 1.04. I guess I simply run it without any other preparations. Is this correct?
Click to expand...
Click to collapse
I guess there isnt really any need to do that, if you flash SPL 1.01MFG to it then theres no need to do this step.
anubus12 said:
...
2) Super CID and simunlock using HTC_Hermes_SIM_Unlock_v2a.zip
Click to expand...
Click to collapse
I would use the unlocker v3 (i suspect you meant v3 anyway)
anubus12 said:
...
3) I choose the ROM RUU_Hermes_CINGULAR_WWE_2.06.502.3_6275_1.33.31.00_108_Ship.exe
Click to expand...
Click to collapse
The ROM you choose is entirely up to you so yes this should be ok
anubus12 said:
...
4) Use NBExtract to decompress the above ROM to get files OS.nbf and Extrom.nbf file
Click to expand...
Click to collapse
Yep goes without saying ;-)
anubus12 said:
...
5) Flash SPL 1.01MFG using mtty.exe. Is this necessary? Can't I flash OS.nbf with SPL1.04?
Click to expand...
Click to collapse
IF you are doing this then it would be the FIRST step you do
anubus12 said:
...
6) Flash OS.nbf file extracted using mtty.exe
7) Flash extrom.nbf file extracted using mtty.exe
Click to expand...
Click to collapse
Still....yes no problem.
anubus12 said:
...
8) Flash radio from file RUU_Hermes_TMD-TMA_Radiopatch_1.27.00.00_107_GER.exe by simply running it. Is this correct?
Click to expand...
Click to collapse
This part is beyond what i did, my process was that i upgraded to radio ROM 1.27.00.00 using the signed .exe because i originally had SPL 1.09.
anubus12 said:
...
Am I missing something in the process?
Click to expand...
Click to collapse
You seem to have it figured out, but dont go on what i say here, wait for it to be verified by more than just me
My process (having already got superCID and unlocked a while ago) was to upgrade to radio 1.27.00.00 before anything else, then to flash SPL 1.01MFG using mtty, then flash the OS.nb file from the ROM i chose, then to flash ExtROM.nb (again from the ROM i chose). By using radio 1.27 you will have radio loader 107 which is recommended still.
Once some other people have looked over what you posted then you should go ahead (if they all give the "all clear" )
You combination of rom and radio is a good idea (the ROM and ExtROM is entirely up to you but the radio is the highest that doesnt have loader 108?)
It's even easier than that;
get my Custom RUU kit and you can skip the reflash;
take the 3.3AKU and extract the RUU_Signed.
extract the RUU signed with NBHExtract or my GUI tool (make sure it's all in the same directory) then you can create a NEW RUU with SPL 1.04, whatever radio you like (if you want a new one) and the 3.3 OS AKU.
remember: if you do it this way, you can have whatever components you want; ExtROM, OS, mix and match anything.
however... if you don't think you can manage doing this, tell me what you want and I'll happily assemble it for you
1. SuperCid and Unlock with POF VERSION 3
Website:
http://pof.eslack.org/hermes-unlocker/
Install Instructions:
Easy auto-install Instructions:
Unzip unlocker and run AUTO_Unlock_v3.bat
If you don't want to install automatically, or for some reason the process doesn't work for you, here are the manual instructions:
Transfer SSPL/SSPL-HERM.exe to your phone and run it
Tri-color screen will appear
Disable activesync (file -> connection settings -> uncheck "allow USB connections")
Connect your phone to your computer using the USB lead.
Run RUU/ROMUpgradeUt.exe
Follow the flashing process (Check the "I understand..." and "I completed..." boxes and update!)
Allow your phone to reboot.
Transfer HERM_Unlock_v3.exe program to your phone and run it
Click the Unlock Button, select unlock option. Select if you want SIM/CID unlock.
Click "Unlock!" and wait until process finishes.
When done, turn off your phone for 10 seconds and reboot after that.
2. Then Run this cooked ROM (Cooked w/Olipro software)
http://uploadingit.com/files/8194/RUU_CINGULAR_2.06.502.3_1.27.00.00_SPL1.04.zip
Rom: 2.06.502.3
Radion version: 1.27
SPL: 1.04
Ext Rom: 2.06.502.3
I think radio 1.33 or 1.34 is better then 1.27. I do not see a difference between 1.33 or 1.34 though.
You pretty much had the process but this will be easier for you.
just to point out; SuperCID and Unlock (unless using a different SIM) is unnecessary and *could* potentially invalidate your warranty.
SuperCID is pretty much redundant nowadays with the new SSPL; the only real advantage to having your device SuperCID is if there isn't a ROM for your CID with old version stuff to revert to.
Thank you for all the replies! I appreciate it.
@mrvanx and wpbear
The reason stated using unlocker v2a was because, from what I understand, if I use v3 it would put a patched 1.08 Radio BL (which I thought we want to avoid). Which means that I won't be able to "downgrade" to a lower version radio. Am I wrong?
@mrvanx
You said that I didn't need to downgrade to 1.04 BL because I could use 1.01MFG. I thought that I couldn't do that with 1.06 or higher. I had to downgrade to 1.04 first.
@wpbear
I assume in order to use your custom cooked ROM, I have to SuperCID right?
@Olipro
Thanks for the offer of cooking up a ROM. I think wpbear's ROM has everything I wanted. But again, if I wanted to use your ROM, I would have to SuperCID? Also, where can I get your GUI?
But what is the best combination right now of OS, Ext, and radio?
Thanks again!
anubus12 said:
Also, where can I get your GUI?
Click to expand...
Click to collapse
Nevermind, I found your GUI. Thanks!
The only advantage of real SuperCID is being able to write to extrom once you've unlocked it.
You did a real nice v1.0 upgrade set of instructions btw They were perfect. In fact that's exactly what I did to upgrade my 8525.
However, the recent explosion of NBHtools that take advantage of Des' SSPL technique (nicely done Olipro btw )have opened up much better ways to accomplish this now.
anubus12 said:
Thank you for all the replies! I appreciate it.
@Olipro
Thanks for the offer of cooking up a ROM. I think wpbear's ROM has everything I wanted. But again, if I wanted to use your ROM, I would have to SuperCID? Also, where can I get your GUI?
But what is the best combination right now of OS, Ext, and radio?
Thanks again!
Click to expand...
Click to collapse
no, you do *not* have to SuperCID at all with my RUU since it uses SSPL.
if you use the custom RUU (and you can tell, it has the XDA Dev logo on) then your device does not need to be SuperCID
anubus12 said:
@mrvanx
You said that I didn't need to downgrade to 1.04 BL because I could use 1.01MFG. I thought that I couldn't do that with 1.06 or higher. I had to downgrade to 1.04 first.
Click to expand...
Click to collapse
You SHOULD be ok, i downgraded to SPL 1.01MFG from version 1.09 by just flashing it using mtty.exe. I followed the instructions on the How to Flash AKU3.3 Update thread (the first post) to get my new ROM onto my device. I used the HTC AKU3.3 Test ROM and it worked just great.
anubus12 said:
Thank you for all the replies! I appreciate it.
@mrvanx and wpbear
The reason stated using unlocker v2a was because, from what I understand, if I use v3 it would put a patched 1.08 Radio BL (which I thought we want to avoid). Which means that I won't be able to "downgrade" to a lower version radio. Am I wrong?
Click to expand...
Click to collapse
I do not think Pof unlocker put BL 108 on your device, but it doesnt matter anymore since SSPL bypass this and you can now still do radio only changes.
anubus12 said:
@wpbear
I assume in order to use your custom cooked ROM, I have to SuperCID right?
Click to expand...
Click to collapse
No, the bootloader bypasses this now, but as someone else pointed out, if you want to change your Ext_ROM with the hack in the Wiki later, you will need to SuperCID still.
anubus12 said:
But what is the best combination right now of OS, Ext, and radio?
Click to expand...
Click to collapse
OS/Ext ROM: 2.06
Radio 1.34 or 1.27
wpbear said:
Then Run this cooked ROM (Cooked w/Olipro software)
http://uploadingit.com/files/8194/RUU_CINGULAR_2.06.502.3_1.27.00.00_SPL1.04.zip
Rom: 2.06.502.3
Radion version: 1.27
SPL: 1.04
Ext Rom: 2.06.502.3
Click to expand...
Click to collapse
@wpbear
I used the cooked ROM RUU_CINGULAR_2.06.502.3_1.27.00.00_SPL1.04.zip for the upgrade. One question, I have SPL 1.06 before upgrading. Since the cooked ROM has 1.04 in it, I thought it would downgrade to 1.04. Instead, the SPL did not change. Why?
Same result, same question.
Why?
Where can I download this Rom?
Where can I download this Rom?
Download link doesn't work....
anubus12 said:
@wpbear
I used the cooked ROM RUU_CINGULAR_2.06.502.3_1.27.00.00_SPL1.04.zip for the upgrade. One question, I have SPL 1.06 before upgrading. Since the cooked ROM has 1.04 in it, I thought it would downgrade to 1.04. Instead, the SPL did not change. Why?
Click to expand...
Click to collapse
Are you SuperCID with POf unlocker?
SuperCID/unlock yes. POF no.
Wiki and numberous posts indicate if the unit is SuperCID, it is SuperCID period however there is a v2 v2a and v3.
Is there more to SuperCID than just SuperCID?
Sometimes it sticks and sometimes it does not?
Can v3 be run over top of an existing SuperCID/unlocked unit without risk?
True you are either SuperCID or not, but we have seen people loose SuperCID for no apparent reason. Use mtty and check if you are still SuperCID.
Still superCID, still 1.06.
rvc said:
Still superCID, still 1.06.
Click to expand...
Click to collapse
once you have superCID you can downgrade your bootloader by this http://wiki.xda-developers.com/index.php?pagename=Hermes_BootloaderMFG
new custom RUU is complete;
ROM Cookers, the good news is that this is now a single file, simply provide it with an NBH and you have compatibility with all SPL versions.
Fifth edition... with detection of all SPL versions, plus a very special selection of two soft-load options, including an "Unsafe" SPL which can be used to flash your device back to any SPL you desire.
5.2 is a small patch to fix an error with the unsafe SSPL not allowing you to overwrite the bootloader
Good Work Olipro One Question When Will It Be Available?
Cheers
fantastic Oli,
Great work, guy! (as usual )
Great works.
ok, Custom RUU is released, enjoy
uhm... minor bug in the old release... replaced
Thanks. You make life a lot easier....
Olipro, I can't flash using your new RUU and Hard 1.11SPL.
I got installed your Hard SPL 1.11. Start the RUU and selected "SPL-1.11 Bootloader" and mark "Is it Hard-SPL?", Everithing goes well but, when it tries to start the upgrade, the machine hibernates and, after some seconds an error 260 appears.
IMHO the RUU can't start the Hard-SPL 1.11.
Any clue?
EDIT: It doesn't leave a RUU.log in C:\ like previous version (?)
Thanks and best regards.
@VivaErBetis: put your phone in bootloader mode manually, then start the upgrade.
@VivaErBetis
Do you realy have SPL 1.11 on your phone? I think it means "Olipro SPL 1.11" is not SPL 1.11.
"Olipro SPL 1.11" can also be "SPL 1.04" and "Is it Hard-SPL"
So you must choose your original SPL and "Is it Hard-SPL".
brmm0016 said:
@VivaErBetis
Do you realy have SPL 1.11 on your phone? I think it means "Olipro SPL 1.11" is not SPL 1.11.
"Olipro SPL 1.11" can also be "SPL 1.04" and "Is it Hard-SPL"
So you must choose your original SPL and "Is it Hard-SPL".
Click to expand...
Click to collapse
no, you're horribly wrong.
1.11.Oli is based on SPL-1.11, 1.10.Oli is based on SPL-1.04
pof said:
@VivaErBetis: put your phone in bootloader mode manually, then start the upgrade.
Click to expand...
Click to collapse
Ok, done and it runs well. Thanks pof.
OK, sorry my mistake.
Now i read a lot of more thread, and the most is clear.
Thanks
ok, Custom RUU 3.5 released, enjoy
Olipro said:
ok, Custom RUU 3.5 released, enjoy
Click to expand...
Click to collapse
Thanks mate! This is how I wanted it
Olipro said:
ok, Custom RUU 3.5 released, enjoy
Click to expand...
Click to collapse
So quickly, thanks.....
Great stuff Oli
So, let me get this straight: just stick an nbh in the same location as this and run yeah?
Genius and simple!
So, do I run this instead of romupgradeut.exe that comes with, for example, the WM6 roms, if I have hard-spl 1.11 installed?
petes said:
So, do I run this instead of romupgradeut.exe that comes with, for example, the WM6 roms, if I have hard-spl 1.11 installed?
Click to expand...
Click to collapse
yes, put it in an empty folder along with the NBH you want to flash, that's all.
What I have now:
OS: Black 2.0 Cingular edition
Boot Loader: 1.01
Radio BL: 108
Radio: 1.38.10
what I want:
OS: WM 5 from the 1.34 cingular release
Boot Loader: Loader from the 1.34 cingular release
Radio BL: AFAIK you can't downgrade these so staying at 108
Radio: 1.16.00.00
How I plan to get there:
take the .nbh form the 1.34 cingular package and use RUU to flash the device.
Questions and concersion:
I'm looking for input on possible incompatabilities and hang-ups with varios BL versions and what not.
comments / feedback on my plan would be greatly appreciated and I will build a monument in your name if you help .
This has been covered before...
But, since you're well on your way to brick-ville, I'll buy your phone off you for, say, $100? It'll be worth less after you brick it...
Read up on the W*I*K*I and Oli's 1.40.Olipro bootloader before you do something dumb.
I did read it.
And thats the plan I came up with.
I was looking more for a confirmation.
The wiki has a ton of great info but its laid out reall crappy and not very cohesive. So I figured I'd post what I've came up with after reading it to see if I missed something. And from there maybe get more specific input on where the issues/dependencies are..... or maybe not.
spicer said:
I did read it.
And thats the plan I came up with.
I was looking more for a confirmation.
The wiki has a ton of great info but its laid out reall crappy and not very cohesive. So I figured I'd post what I've came up with after reading it to see if I missed something. And from there maybe get more specific input on where the issues/dependencies are..... or maybe not.
Click to expand...
Click to collapse
From your plan it is obvious that, even IF you read the wiki, you didn't understand it. Re-read the THREADS about 1.40 SPL and also search for MRVANX and read his TUTORIALS...
---New plan
What I have now:
OS: Black 2.0 Cingular edition
Boot Loader: 1.01
Radio BL: 108
Radio: 1.38.10
what I want:
OS: WM 5 from the 1.34 cingular release
Boot Loader: Loader from the 1.34 cingular release
Radio BL: AFAIK you can't downgrade these so staying at 108
Radio: 1.16.00.00
How I plan to get there:
Flash to hardSPL-v6
Fash Radio to 1.16
flash OS i get out of the 1.134 package. (the os.nb file i believe it is named)
last flash the boot loader.
Questions and concersion:
I'm looking for input on possible incompatabilities and hang-ups with varios BL versions and what not.
comments / feedback on my plan would be greatly appreciated and I will build a monument in your name if you help .
LegolasTheElf said:
From your plan it is obvious that, even IF you read the wiki, you didn't understand it. Re-read the THREADS about 1.40 SPL and also search for MRVANX and read his TUTORIALS...
Click to expand...
Click to collapse
I really appreciate the feedback. At least you're letting me know my plan wont work. Which will prevent me from trying it. But it would be kick ass if you could be more specific about what in the wiki i missed like :
-you can't flash the entire .nbh file cause it will try to replace your boot load and break it.
or
- Re-read the THREADS about 1.40 SPL because *something useful here*
Either way I'm still thankful cause I know my plan is a **** sandwich.
Very good.. You're getting there! It's nice to see someone read some directions..
You have it mostly right.. Flash the HardSPLv6 first. Then, grab the .nbh from the cingular rom and combine it with CustomRUU. Choose 'Autodetect' (we're looking for a hard-spl flash)..
Then, once that's done, you'll have the right radio, OS, splash, etc.. The only thing left would be to down-grade the bootloader, which I would advise against.. But, you can do it.. There is a seperate thread on HOW to do that, as it isn't just a one-step process.. Search and ye shall find.
Thank MAn!!! That kicks ass.
I need to send my phone back because the radio dies every 5 mintes.
So I want to get it as close to factory as possible.
So after I downgrade the BL i won't be doing anymore flashing to that phone.
Sometimes when I soft reset the phone is says "No GSM" even when sim is there. Soft reset it again and the radio is detected.
Very irritating.
Check out:
http://www.mrvanx.org/hermes_guide/
Flash HardSPL-1.40
Create NBH containing your provider's 2xSplashScreen + ExtROM + OS & flash it
Flash 1.16 radio
Flash-HardSPL-1.10
Flash your original IPL & SPL versions.
F-ya! That last part about down grading the BL is the part I was having trouble pinning down.
One last question:
Can I use the cingular NBH or will it try to flash the RBL and crash because you can't down grade the RBL
the the new mrvanx page is dope. found the donwgrade guide.
Bricked using this method
pof said:
Flash HardSPL-1.40
Create NBH containing your provider's 2xSplashScreen + ExtROM + OS & flash it
Flash 1.16 radio
Flash-HardSPL-1.10
Flash your original IPL & SPL versions.
Click to expand...
Click to collapse
Pof,
I did it this way but after flashing the radio rom I get no GSM and then I'm stuck in the Windows Mobile Screen.
I have looked in the Wiki but how can I actually unbrick?
My SPL is still 1.40 Oli. But I can't get activesync to work.
Should I flash the new radio via SD card or any other way (mtty?)
I would be very gratefull for any help,
Cheers,
HJ
P.S. Found a solution; http://wiki.xda-developers.com/index.php?pagename=Hermes_UpgradeProblems#problem5
I will try to do this trick.
Thanks
@hellejoep: Try flashing your latest working radio again in NBH format.
pof said:
@hellejoep: Try flashing your latest working radio again in NBH format.
Click to expand...
Click to collapse
Pof,
One question, Can I upgrade radio rom via mtty?
Or otherwise?
Cheers,
HJ
P.S. How can I Flash any radio in NBH format? While stuck in bootloader?
hellejoep said:
Can I upgrade radio rom via mtty?
Click to expand...
Click to collapse
no
hellejoep said:
How can I Flash any radio in NBH format? While stuck in bootloader?
Click to expand...
Click to collapse
Disable activesync, and use CustomRUU.
pof said:
Disable activesync, and use CustomRUU.
Click to expand...
Click to collapse
Done that but then I get a Error 260.....
Any suggestions?
Or is there a way to bypass this? I have IPL 1.01 and SPL 1.40 Olipro.
I now got a Connection Error 264 but the bootloader gives usb and I can reach the hermes bij MTTY.exe.....
What is going wrong?
@hellejoep: close all programs including mtty before u run ruuwraper. Make sure you're using the latest version (v4.2) and activesync is not enabled.
pof said:
@hellejoep: close all programs including mtty before u run ruuwraper. Make sure you're using the latest version (v4.2) and activesync is not enabled.
Click to expand...
Click to collapse
It worked, cheers!!!!!
LegolasTheElf said:
Very good.. You're getting there! It's nice to see someone read some directions..
You have it mostly right.. Flash the HardSPLv6 first. Then, grab the .nbh from the cingular rom and combine it with CustomRUU. Choose 'Autodetect' (we're looking for a hard-spl flash)..
Then, once that's done, you'll have the right radio, OS, splash, etc.. The only thing left would be to down-grade the bootloader, which I would advise against.. But, you can do it.. There is a seperate thread on HOW to do that, as it isn't just a one-step process.. Search and ye shall find.
Click to expand...
Click to collapse
@LegolasTheElf,
This was great example on how to get people to read the wiki. I like your approach and I will try to use it in the future.
I have upgraded my 838pro to IPL - 1.04, SPL- 2.10 Olipro , Radio 1.43.00.00, OS is Black Majik .
Is it possible to upgrade from officially released wm06 rom from dopod (when its released), will it work, or give me problems.
I am newbie to upgrades. so i dont know technical things like hardspl etc.
Thanks
Pramod Naidu
Yes it is possible, but your SPL will be overwriten..
If you want to keep HardSPL, you need to extract the official SPL from the official ROM so it doesn`t get flashed onto your device
Shamanix said:
Yes it is possible, but your SPL will be overwriten..
If you want to keep HardSPL, you need to extract the official SPL from the official ROM so it doesn`t get flashed onto your device
Click to expand...
Click to collapse
INCORRECT sir.
HardSPL will not allow a retail SPL to flash over it.
The RUU which HTC will no doubt supply it with will probably not detect your device correctly (since you are using a superior SPL hehe).
Copy ther nbh file contained in the update to a folder and use RUUWrapper.exe which will flash it no problem (use autodetect).
One more foolish question
Is my device super CID bec of hardspl, if not, if i make my device super cid, will it give me added benefits.
viewedit said:
Is my device super CID bec of hardspl, if not, if i make my device super cid, will it give me added benefits.
Click to expand...
Click to collapse
The only benefit of SuperCID is you can read/write to the ext_rom in windows mobile.....so not really a great benefit.
HardSPL reports itself as SuperCID.....but your device is NOT. Essentially your device is virtually SuperCID.
Thanks
Thanks a lot sir.
Pramod Naidu
When I have gone back from a WM6 ROM to the Official (WM5) AT&T ROM I flashed the older (1.04 I wanna say?) version of HardSPL and it works fine and gets overwritten to the 1.11. Then if I go back to WM6 I just reflash HardSPL v7 and it works fine. I'm not sure if that actually does make it official, but I know based on the startup and bootloader screens, after going to the old HardSPL then using the AT&T Updater, everything says 1.11 and looks the same as it did before I started putting cooked ROMs on my phone.
What if its exe file
how do i extract the nbh from exe file.
How to extract nbh from exe
how do i extract nbh from exe to flash it to hardspl, i dont want to downgrade my spl
Use winrar.
Right click on the file and "open with winrar"
Question?
mrvanx said:
INCORRECT sir.
HardSPL will not allow a retail SPL to flash over it.
The RUU which HTC will no doubt supply it with will probably not detect your device correctly (since you are using a superior SPL hehe).
Copy ther nbh file contained in the update to a folder and use RUUWrapper.exe which will flash it no problem (use autodetect).
Click to expand...
Click to collapse
Hi mrvanx,
Just a quick question regarding your answer to Shamanix...
You said here that all he needs to do is copy the their nbh file in the update and use the RUUWrapper to flash it... Surely he needs to extract only the rom, ext rom, and radio? Then recompile to a nbh file to flash?
The original nbh file is still going to contain the spl & ipl which will cause problems not so?
Sorry if i am butting in here
Regards.
Trezona said:
Hi mrvanx,
Just a quick question regarding your answer to Shamanix...
You said here that all he needs to do is copy the their nbh file in the update and use the RUUWrapper to flash it... Surely he needs to extract only the rom, ext rom, and radio? Then recompile to a nbh file to flash?
The original nbh file is still going to contain the spl & ipl which will cause problems not so?
Sorry if i am butting in here
Regards.
Click to expand...
Click to collapse
The flash will go ahead as normal but the SPL and IPL will NOT be written over.
Either that or just use the repackaged version of the official WM6 dopod ROM ive posted in the WM6 section.
mrvanx said:
The flash will go ahead as normal but the SPL and IPL will NOT be written over.
Either that or just use the repackaged version of the official WM6 dopod ROM ive posted in the WM6 section.
Click to expand...
Click to collapse
Great! i understand, thanks!
Regards.