Mine ripped apart when I was trying to repair the screen and it fell out of my hand. I have been searching for hours with no luck. Anyone know anywhere where I can find this part?
I've atached the image
Try here:
http://cnn.cn/shop/htc-c-277.html?osCsid=37d6ea546d0b93a035876bf59f229d3b
dude did u find the cable? cause mine ripped when opening the phone...
8525
jarnism said:
Mine ripped apart when I was trying to repair the screen and it fell out of my hand. I have been searching for hours with no luck. Anyone know anywhere where I can find this part?
I've atached the image
Click to expand...
Click to collapse
is it cingular 3125?
you may find it in sino4n.com
it's not a Flex Cable cingular 3125, but the flex cable for the Cingular 8525 HTC Dopod D9000 M3100 !!
please just check at ~ http://www.ebay.com.au/itm/NEW-Flex...34?pt=LH_DefaultDomain_15&hash=item3f0bd056ce
Related
Hey guys.
Just looking for a damaged jasjam or dopod or hermes etc etc.
Needing a main board by the looks of things. Seem to have blown the charging circuit in the phone. Assume this is apart of the mainboard. Have tried new battery, charger, usb doesnt work etc.
So if anyone has a mainboard or complete phone i could buy please let me know.
PS i have had a lil expirience with it before. i smashed the lcd and got ahold of another. Replaced it and worked a treat till i fried it
Ahh well.
Cheers
Matt
A lot of the pins inside the power connector on my 3125 are mangled, I thought about trying to straighten them but I think it's a lost cause. Any suggestions on what I might do?
I already replaced it with a AT&T Tilt (Kaiser), but it'd be nice to get my original working again as a backup.
Mmmm.......
Connector on my 3125 had absolutely destroyed. I never thought it would be repaired. The connect is a wrong design and don't hope it will work for a long time.
It happened to me to. Now I use two batteries and an universal charger.
The connector on my Cingular 3125 broke free of the board after I passed it off to my wife (I've got a HTC Fuze now!). I'm going to see about soldering it back on Monday at work - we've got some pretty skilled techs. I'll post back with my results.
lordxiagan said:
A lot of the pins inside the power connector on my 3125 are mangled, I thought about trying to straighten them but I think it's a lost cause. Any suggestions on what I might do?
I already replaced it with a AT&T Tilt (Kaiser), but it'd be nice to get my original working again as a backup.
Click to expand...
Click to collapse
This is a possible accessory solution:
http://houston.craigslist.org/ele/1121244843.html
Earlier this evening, I sent in a request for confirmation on the proper USB data cable.
Regards,
Rudydb
hyachts said:
The connector on my Cingular 3125 broke free of the board after I passed it off to my wife (I've got a HTC Fuze now!). I'm going to see about soldering it back on Monday at work - we've got some pretty skilled techs. I'll post back with my results.
Click to expand...
Click to collapse
hm interesting, if it comes off the board that easy maybe it can either be repaired or replaced. Gonna look for an OEM store now =D
hyachts said:
The connector on my Cingular 3125 broke free of the board after I passed it off to my wife (I've got a HTC Fuze now!). I'm going to see about soldering it back on Monday at work - we've got some pretty skilled techs. I'll post back with my results.
Click to expand...
Click to collapse
The last time I asked a local cell repair shop, it was a $40 repair. They told me that it was a common problem.
One of the guys at work was able to solder it back in place without too much trouble. It's very close quarters, but as long as you haven't lost any of the pins it's not so bad to get it back in place.
Hi All,
For my blackstone, i need some spare parts. Does somebody know where to buy:
-torx screws
-bluetooth & gps connection cables
-probably a new main board
Tnx!!
Dennis
same here! especially gps cable
Cetin said:
same here! especially gps cable
Click to expand...
Click to collapse
E
B
A
Y
The magic site
But, most probably you can't get a new main board from ebay. I doubt even HTC has them. Changing a new main board is essentially like changing the whole phone, no?
Hello if your mainboard has gone wrong send it to HTC. The mainboard on my HD packed up I got in touch with HTC UK http://www.htc.com/uk/ (go to support and phone them up) they picked the phone up a week ago Tuesday tested the phone/fitted a new mainboard and sent it back, got it back last Wednesday. Fixed for free, very polite and very helpful
Jez
the problem is that my device felt to the ground after 2 months :S Then i got my screen repaired but not by htc since it is not warranty. The device still resets every now and then, so i try to fix it myself... that's why i need these spare parts... so suggestions still welcome!
nobody?
The only possible place to get a new mainboard will be htc.com. Also why a gps cable when the touch has built in gps. jez
jez.stix said:
The only possible place to get a new mainboard will be htc.com. Also why a gps cable when the touch has built in gps. jez
Click to expand...
Click to collapse
You didn´t understand the gps cable thing. It´s the gps cable behind the cover.
damasterman said:
nobody?
Click to expand...
Click to collapse
I had a Hermes that kept resetting after loading a new ROM. I changed it to another and it stoppped happening....Are you sure it's not a software problem?
damasterman said:
Hi All,
For my blackstone, i need some spare parts. Does somebody know where to buy:
-torx screws
-bluetooth & gps connection cables
-probably a new main board
Tnx!!
Dennis
Click to expand...
Click to collapse
Hey damasterman,
did you find any part?
I still need a gps cable. I'm looking for it in ebay but no way.
Can anyone help me getting a gps cable?
Push...
No one still don´t know where to find coaxial cable from inside?
Cetin said:
Push...
No one still don´t know where to find coaxial cable from inside?
Click to expand...
Click to collapse
Try this one:
www.farnell.com
search on item 1325918
it's 3cm to long but schould fit
Good luck
Wow!
I think that´s it.
Did you try this one?
Is it the right size?
Cetin said:
Wow!
I think that´s it.
Did you try this one?
Is it the right size?
Click to expand...
Click to collapse
I'll get it tomorrow and try it later, let you know if it fits, i know for sure about te connectors, but it is 3cm longer, so should see if you can put the 3cm anywhere under the mainboard.
Cu, Mario
Usemyass said:
I'll get it tomorrow and try it later, let you know if it fits, i know for sure about te connectors, but it is 3cm longer, so should see if you can put the 3cm anywhere under the mainboard.
Cu, Mario
Click to expand...
Click to collapse
Did you try this one and what part number did you end up ordering?
HTC HD Top volume board
Anyone know where to get the top volume board for the HTC Touch HD?
Cetin said:
Wow!
I think that´s it.
Did you try this one?
Is it the right size?
Click to expand...
Click to collapse
I put it today into the HTC HD, it fits, but like i said its 3 cm to long but you can put the 3 cm extra coaxial parrallel to the red/black vibrator cable.
Good luck
try gsm4world.us ...got lots from there for my touch hd
tacginc said:
Anyone know where to get the top volume board for the HTC Touch HD?
Click to expand...
Click to collapse
am looking for the same part a friend found this.. ebay item 190342978567 am gonnd try it out soon!
hi
i have a htc touch plus or as they call it htc touch dual.digitizer issue it stoped responding so i bought new one fitted in and still the same problem .i think is a software problem i guess driver software for touch screen .if any one can help please
thanks
Touch Dual digitizer
Hi Saliml2
Not convinced it is a software issue. My digitizer on T-Mobile Touch Plus did the same thing. It stated behaving erratically and then stopped responding altogether. I replaced the digitizer (via eBay) and it work for a few days and then stopped again.
I have read around the internet and have tried several ROM updates etc (currently running a WM 6.5.5 found in other area of this forum) but this has not solved the problem.
It seem to be an alignment issue - i.e. screen alignment is outside the screen area, but there seems to be no way of getting it back. Could be a fault on the phone mainboard (?) but there doesn't seem to be any info around apart from sending it to HTC for repair (not viable as the phone value negates this)
My phone is still not working, I might try opening it up again and reseating the digitizer cable but have done this twice already.
Have you try change the flex cable?
I had one to, with the same problem, and after changing the flex everything was ok...
Good luck!
Hi Amokh Just to clarify, what is the flex cable? The digitizer has a cable already attached to it that plugs in to a zif connector on the mainboard - I assume that this controls the data flow for the digitizer.
Any help would be appreciated.
deepthought2471 said:
Hi Amokh Just to clarify, what is the flex cable? The digitizer has a cable already attached to it that plugs in to a zif connector on the mainboard - I assume that this controls the data flow for the digitizer.
Any help would be appreciated.
Click to expand...
Click to collapse
Maybe this is helpfull http://www.pdacenter.ru/razborka/razbor_htc_touch_dual/
Goodluck
Flex cable, i was mean the cable between the mainboard and the lcd block, you can see it in the previous link, picture 20. Have you try it to change?
hello guys how did you manage to put the digitizer cable in place mine doesn t seem to get in place do i need something to hold the connector in place???
Greetings.
Anyone knows where I can find a coaxial cable for the wifi for the HD2?
It's not only nicotine u use, is it. Wat the hell do you mean
If you're thinking of hooking up an external antenna to your HD2, as far as I know you'd have to open up the HD2 and wire on a coax port to the right part of the board, and I've got no idea how to get that working!
If you do manage to do this, let us know how!
Sorry if I've misunderstood your rather strange question!
Did you lose it when disassembling your HD2 or something?
I believe it's just a standard coax cable with u.fl connectors, the problem would be finding one with correct length. eBay has plenty, but they're anywhere from 20 to 50cm - don't really want to try fitting that in a phone...
you can find them at mouser com
i need also one and did some search work
you need i W.FL-2LP-04N2-A-(60) u.fl is a lit bigger.
2lp means two sides connector 04n ticknes 0.83mm, 2 color, (60= lenght)mm.
see also data sheet in table on the side. looks, they sel also just one.
i not alowed to place the link. becourse i am new here.
onlly did not fnd out or the have also female connectors
ewdin said:
Did you lose it when disassembling your HD2 or something?
Click to expand...
Click to collapse
Yup! Correct!
Thank you all for your replies. I did find one on ebay, from a broken one.
I hope he will sent me the right one. If not I'll try ur suggestion Tristan_1. Thx
I was on same situatio with wifi cable. Searched over net and nothing. Looked to here recommended shop too. Price for shpping to europe is 10 times bigger than cable itself.
But i finded on ebay cables to Touch Daimond. On pics they looks same like on hd2. I asked here on touch forum lengts for both cables. They are SAME with hd2 cables. Only difference is that hd2 uses for gps white one' touch black. I opened more 10 hd2 (all from europe). Abot t-mobile i cant say anything.
On ebay i finded many sellers with possible search string: OEM AERIAL ANTENNA WIRE RECEPTION FOR HTC TOUCH DIAMOND
Usually after two week i can finally confirm are these touch diamond cables right ones for hd2 too.
Sent from my HTC HD2 using Tapatalk
Tristan, THANK YOU THANK YOU THANK YOU!
I have been scouring the internet looking for this part and had no idea what to look for so thank you so much for your post. I purchased that part and hopefully I can report back that my phone works again!
.d2onderdelen .nl
i find out, that they have them also. and they sel them in pares. also other part of the hd2
Finally i can CONFIRM that YES wifi/bluetooth antenna coaxial cable is same what used on HTC HD2 (can confirm only EU model). About T-Mobile i cant say.
But GPS cable wich one sell with wifi/bluetooth cable dont fit. Its littlebit longer but short for using on GPS.
This one wich i bought dont had so quality on connectors side (not for many many times connect/disconnect) like original. Yes it was cheap too. But i tested work and signal and there was no loss.
Hope helped now many users who cant find replacment for wifi / bluetooth coaxial cable.
Just try on ebay string OEM AERIAL ANTENNA WIRE RECEPTION FOR HTC TOUCH DIAMOND or just try find spare parts for Touch Diamond. I itself used seller named gsm4world.
ahanssen said:
Tristan, THANK YOU THANK YOU THANK YOU!
I have been scouring the internet looking for this part and had no idea what to look for so thank you so much for your post. I purchased that part and hopefully I can report back that my phone works again!
Click to expand...
Click to collapse
Next time use Thanks button
Anyway, this info was FREE
Tristan_1 said:
.d2onderdelen .nl
Click to expand...
Click to collapse
Thanks but hard to explore site if its only on one lang and you dont know it.
It true that it is a bit hard to read dutch, but easy to find the right phone, and were you have to look for (onderdelen) that are the inner part of the phone
I find out that the coaxial cable are out of the store on the moment. i can not find them Anny more.
TRY HERE
For Coaxial try also parts4repair.com and search for bluetooth antenna and not for wifi (which are the same anyway).
For me the solution of using coaxial from Diamond did'nt work.
Hope this will...
Cheers