USE AT YOUR OWN RISK!!!
There is a way to flash your StarTrek. It is a way using pdocwrite utility from itsutils.
WARNING! Your startrek must be application unlocked and SuperCID!
itsutils can be downloaded here.
You can flash only a OS part of rom! (OS.nb)
So, there is command:
Code:
pdocwrite 06_OS.nb 0x0 0x2600000
After complete, make a hard reset (Hold record and camera button, and press power (red) button) or Clear Storage (Start Menu->Accessories->Clear Storage)
P.S. Thanks to sp3dev for giving me a pdocwrite command
THAT IS AN OLD INFO, SO HEAD UP FOR UPDATED (IN RUSSIAN):
http://4pda.ru/forum/index.php?showtopic=43194&st=0
Erofich said:
USE AT YOUR OWN RISK!!!
There is a way to flash your StarTrek without supercid. It is a way using pdocwrite utility from itsutils.
WARNING! Your startrek must be application unlocked!
itsutils can be downloaded here.
You can flash only a OS part of rom! (OS.nb)
So, there is command:
Code:
pdocwrite 06_OS.nb 0x0 0x2600000
P.S. Thanks to sp3dev for giving me a pdocwrite command
Click to expand...
Click to collapse
Hmm.. i said you need SuperCID!!
This needs it, but allows unsigned code))
It`s not the only way, the others are but need to be developed (like patched spl)
Can flash to WM6?
So can we flash our startrek to WM6 using the OS.nb of the VOX rom?
sp3dev said:
Hmm.. i said you need SuperCID!!
This needs it, but allows unsigned code))
It`s not the only way, the others are but need to be developed (like patched spl)
Click to expand...
Click to collapse
but NOW it is only way
arunraaj said:
So can we flash our startrek to WM6 using the OS.nb of the VOX rom?
Click to expand...
Click to collapse
no, because of vox and startrek have different drivers
Erofich said:
no, because of vox and startrek have different drivers
Click to expand...
Click to collapse
But sp3dev or some other ROM cooking gods here can help us port the OS.nb of VOX to startrek with our existing WM5 drivers. Possible???
arunraaj said:
But sp3dev or some other ROM cooking gods here can help us port the OS.nb of VOX to startrek with our existing WM5 drivers. Possible???
Click to expand...
Click to collapse
offcourse! ^^ but by his words, it is better to port tornado rom to startrek, and not vox rom
Let's wait for the Tornado WM6 rom
The Tornado WM6 rom may be out by end of this month. Let's hope our startrek will be compatible with this rom.
we will need to port it for our device
A noob question here
If we only flash the OS.nb part while keeping the rest as it is, won't it give us compatibility problem? May be a noob question, but just wanted to clarify.
arunraaj said:
If we only flash the OS.nb part while keeping the rest as it is, won't it give us compatibility problem? May be a noob question, but just wanted to clarify.
Click to expand...
Click to collapse
Occassionally yes, usually no. The IPL and SPL part are not at all likely to be a problem if they are older versions but the Radio ROM might need to be a certain version for a later OS to work correctly.
But so far, such Radio incompatibilities have come up rarely...
Huh, this is my most pervert dream! Thanks a lot for this! ^___^ Now lets pray for new AKU, new Radio........ ^_____________^
pdocwrite doesn't work for me
I'm getting the following error.
"Copying C:\itsutilsbin\itsutils.dll to WCE:\windows\itsutils.dll
CopyFileToTFFS(06_OS.nb:0, 0, 02600000)
ERROR: ITWriteDisk - A dynamic link library (DLL) initialization routine failed."
What's wrong here? Any idea?
your startrek must be application unlocked
WARNING! The command is "pdocwrite 06_OS.nb 0x0 0x2600000"
Please note that 0x2600000 is size of your OS.nb in hexadecimal value. You may calculate it via standart windows calculator
If the device is application locked, we can't even get to the "CopyFileToTFFS" phase. Since I passed this stage, this confirms my startrek is application unlocked. My device (Dopod S300) is CID unlocked too. I was using the Cingular rom for a while, but currently running Dopod rom. I tried to flash to Cingular's OS.nb from my Dopod rom, just to check if this pdocwrite method works. I tried few times, but can't get past this "ITWriteDisk" error. I verified and confirmed the Cingular's OS.nb is of exactly 38MB (0x2600000) in size. So the size is not the issue. So have any other idea?
May be itsutils.dll library not compatible with your rom... I dont know why you have this problem...
Anybody tried this flashing so far?
Has anyone tried this pdocwrite flashing so far? successful??
Erofich said:
May be itsutils.dll library not compatible with your rom... I dont know why you have this problem...
Click to expand...
Click to collapse
Fyi, I tried this command even from the latest cingular rom and it failed with the same error, so the problem is not only with the dopod rom. However I've already PMed sp3dev on this. Waiting for his glue.
my device flashes with no problems
have you try a custom writed or or only the cingular rom?
Erofich said:
my device flashes with no problems
Click to expand...
Click to collapse
Nice to hear. Did you flash from the latest cingular rom? If so, to what OS.nb? Is this OS.nb a custom made? Would you explain a bit more? Thanks.
Related
I have upgraded my 838pro to IPL - 1.04, SPL- 2.10 Olipro , Radio 1.43.00.00, OS is Black Majik .
Is it possible to upgrade from officially released wm06 rom from dopod (when its released), will it work, or give me problems.
I am newbie to upgrades. so i dont know technical things like hardspl etc.
Thanks
Pramod Naidu
Yes it is possible, but your SPL will be overwriten..
If you want to keep HardSPL, you need to extract the official SPL from the official ROM so it doesn`t get flashed onto your device
Shamanix said:
Yes it is possible, but your SPL will be overwriten..
If you want to keep HardSPL, you need to extract the official SPL from the official ROM so it doesn`t get flashed onto your device
Click to expand...
Click to collapse
INCORRECT sir.
HardSPL will not allow a retail SPL to flash over it.
The RUU which HTC will no doubt supply it with will probably not detect your device correctly (since you are using a superior SPL hehe).
Copy ther nbh file contained in the update to a folder and use RUUWrapper.exe which will flash it no problem (use autodetect).
One more foolish question
Is my device super CID bec of hardspl, if not, if i make my device super cid, will it give me added benefits.
viewedit said:
Is my device super CID bec of hardspl, if not, if i make my device super cid, will it give me added benefits.
Click to expand...
Click to collapse
The only benefit of SuperCID is you can read/write to the ext_rom in windows mobile.....so not really a great benefit.
HardSPL reports itself as SuperCID.....but your device is NOT. Essentially your device is virtually SuperCID.
Thanks
Thanks a lot sir.
Pramod Naidu
When I have gone back from a WM6 ROM to the Official (WM5) AT&T ROM I flashed the older (1.04 I wanna say?) version of HardSPL and it works fine and gets overwritten to the 1.11. Then if I go back to WM6 I just reflash HardSPL v7 and it works fine. I'm not sure if that actually does make it official, but I know based on the startup and bootloader screens, after going to the old HardSPL then using the AT&T Updater, everything says 1.11 and looks the same as it did before I started putting cooked ROMs on my phone.
What if its exe file
how do i extract the nbh from exe file.
How to extract nbh from exe
how do i extract nbh from exe to flash it to hardspl, i dont want to downgrade my spl
Use winrar.
Right click on the file and "open with winrar"
Question?
mrvanx said:
INCORRECT sir.
HardSPL will not allow a retail SPL to flash over it.
The RUU which HTC will no doubt supply it with will probably not detect your device correctly (since you are using a superior SPL hehe).
Copy ther nbh file contained in the update to a folder and use RUUWrapper.exe which will flash it no problem (use autodetect).
Click to expand...
Click to collapse
Hi mrvanx,
Just a quick question regarding your answer to Shamanix...
You said here that all he needs to do is copy the their nbh file in the update and use the RUUWrapper to flash it... Surely he needs to extract only the rom, ext rom, and radio? Then recompile to a nbh file to flash?
The original nbh file is still going to contain the spl & ipl which will cause problems not so?
Sorry if i am butting in here
Regards.
Trezona said:
Hi mrvanx,
Just a quick question regarding your answer to Shamanix...
You said here that all he needs to do is copy the their nbh file in the update and use the RUUWrapper to flash it... Surely he needs to extract only the rom, ext rom, and radio? Then recompile to a nbh file to flash?
The original nbh file is still going to contain the spl & ipl which will cause problems not so?
Sorry if i am butting in here
Regards.
Click to expand...
Click to collapse
The flash will go ahead as normal but the SPL and IPL will NOT be written over.
Either that or just use the repackaged version of the official WM6 dopod ROM ive posted in the WM6 section.
mrvanx said:
The flash will go ahead as normal but the SPL and IPL will NOT be written over.
Either that or just use the repackaged version of the official WM6 dopod ROM ive posted in the WM6 section.
Click to expand...
Click to collapse
Great! i understand, thanks!
Regards.
I just download the latest u1000 27.07.07 WM6 rom upgrade and extract all the files from the NBH and there are 9 different .nb
1. Windows.nb
2. primary splash.nb
3. secondary splash.nb
4. ATHENA_IPL.nb
5. G4IPL.nb
6. ExtendedRom
7. radio.nb
8. SIRFBootLoader
9. SPL
Normally flashing my hermes i would just extract the nbh and just re-build it with the windows.nb so i dont overide OLIPRO hardspl. If i flashed this upgrade will this overide OLIPRO hardspl as I think he mention the SPL he used wasnt bulletproof.
@ rom cookers i just used the romkoch tool to dump the nbh and rebuild it with all the .nbs i.e radio , extended rom, splash screens, windows .nb and it creates the RUU_signed which looks ok without no problems. i think if we can get dutty to be involved or look at his tool i think we can get it to optimised to work with athena as the Athena uses the same similar.nbh format as the hermes.
duttythroy said:
i think if we can get dutty to be involved or look at his tool i think we can get it to optimised to work with athena as the Athena uses the same similar.nbh format as the hermes.
Click to expand...
Click to collapse
I thought you were the "real Dutty"! Why did.'t you say so when you were given the standing ovation upon buying your Athena and joining in here
never really gave notice
victoradjei said:
I thought you were the "real Dutty"! Why did.'t you say so when you were given the standing ovation upon buying your Athena and joining in here
Click to expand...
Click to collapse
hi mate never really gave notice as my name mention dutty as well. sorry for the misunderstanding.
duttythroy said:
hi mate never really gave notice as my name mention dutty as well. sorry for the misunderstanding.
Click to expand...
Click to collapse
Base on you signature, it looks like you flashed the ROM that came out late last night early this morning. Are there anything good or bad on the new ROM?
duttythroy said:
Normally flashing my hermes i would just extract the nbh and just re-build it with the windows.nb so i dont overide OLIPRO hardspl. If i flashed this upgrade will this overide OLIPRO hardspl as I think he mention the SPL he used wasnt bulletproof.
Click to expand...
Click to collapse
no, it will not be overwritten.
duttythroy said:
I just download the latest u1000 27.07.07 WM6 rom upgrade and extract all the files from the NBH and there are 9 different .nb
1. Windows.nb
2. primary splash.nb
3. secondary splash.nb
4. ATHENA_IPL.nb
5. G4IPL.nb
6. ExtendedRom
7. radio.nb
8. SIRFBootLoader
9. SPL
Normally flashing my hermes i would just extract the nbh and just re-build it with the windows.nb so i dont overide OLIPRO hardspl. If i flashed this upgrade will this overide OLIPRO hardspl as I think he mention the SPL he used wasnt bulletproof.
@ rom cookers i just used the romkoch tool to dump the nbh and rebuild it with all the .nbs i.e radio , extended rom, splash screens, windows .nb and it creates the RUU_signed which looks ok without no problems. i think if we can get dutty to be involved or look at his tool i think we can get it to optimised to work with athena as the Athena uses the same similar.nbh format as the hermes.
Click to expand...
Click to collapse
yep, I am curious about the other files myself. I dump the NBH using Dutty's NBH tool (1.1) and created a new NBH with the same tool with just the Extended ROM and the Windows.nb. It looks okay, however I have not flashed it yet.
lpsi2000 said:
yep, I am curious about the other files myself. I dump the NBH using Dutty's NBH tool (1.1) and created a new NBH with the same tool with just the Extended ROM and the Windows.nb. It looks okay, however I have not flashed it yet.
Click to expand...
Click to collapse
1) just a question, should be possible to flash the windows.nb from hermes, for example, instead the windows from htc?
2) I know how to extract but not sure about how to put together all the files? can you provide some guidance on what tools use for it and how it works, please?
thanks.
beginner said:
1) just a question, should be possible to flash the windows.nb from hermes, for example, instead the windows from htc?
2) I know how to extract but not sure about how to put together all the files? can you provide some guidance on what tools use for it and how it works, please?
thanks.
Click to expand...
Click to collapse
AT THE MOMENT ITS TOO RISKY TO COMPILE AND FLASHED BUT YOU CANT USED A HERMES .NB AND FLASHED TO YOU ATENA AS YOU WILL END UP WITH AN EXPENSIVE BRICK.
you can use duttys good nbh tool to extract contents from .nbh and then compile the rom radio but its not advise even if your device is hardspl as yet. possible soon or at your own risk
duttythroy said:
AT THE MOMENT ITS TOO RISKY TO COMPILE AND FLASHED BUT YOU CANT USED A HERMES .NB AND FLASHED TO YOU ATENA AS YOU WILL END UP WITH AN EXPENSIVE BRICK.
you can use duttys good nbh tool to extract contents from .nbh and then compile the rom radio but its not advise even if your device is hardspl as yet. possible soon or at your own risk
Click to expand...
Click to collapse
Agreed, still work in progress
hi,
my screen is broken and i have to send it back for repair BUT i need the original rom.
Can i just download my sellers rom (wm5) and flash my crystal wm6 back to wm5
pls advice
Thanks
Korand's ROM is excellent
try...
dendirk said:
hi,
my screen is broken and i have to send it back for repair BUT i need the original rom.
Can i just download my sellers rom (wm5) and flash my crystal wm6 back to wm5
pls advice
Thanks
Click to expand...
Click to collapse
If you have HardSPL it should work (there was an thread about that around somewhere, but I can't find it right now). Otherwise it will be a bit difficult, maybe somebody else can help?
I would try doing a "step 1" first to be safe by loading a NVID ROM
link 1 password is PDAVIET
Then load your vendor's Rom afterwards.
Richard Fantom said:
I would try doing a "step 1" first to be safe by loading a NVID ROM
link 1 password is PDAVIET
Then load your vendor's Rom afterwards.
Click to expand...
Click to collapse
thanks but link is not working
Richard Fantom said:
I would try doing a "step 1" first to be safe by loading a NVID ROM
link 1 password is PDAVIET
Then load your vendor's Rom afterwards.
Click to expand...
Click to collapse
NO NO NO NO!!! DON'T!!
If you flash a Step1 first, you will overwrite the HardSPL and therefore you can't be sure that you get your original state back.
So, make sure your device has HardSPL installed (or use JumpSPL a single time) an then run the official WM5 RUU from your vendor.
rondol1 said:
NO NO NO NO!!! DON'T!!
If you flash a Step1 first, you will overwrite the HardSPL and therefore you can't be sure that you get your original state back.
So, make sure your device has HardSPL installed (or use JumpSPL a single time) an then run the official WM5 RUU from your vendor.
Click to expand...
Click to collapse
How to make sure i have hardspl installed i never changed my phone . i only upgraded once to Crystal V2.
dendirk said:
How to make sure i have hardspl installed i never changed my phone . i only upgraded once to Crystal V2.
Click to expand...
Click to collapse
It is easy.. each time you reset your device.. on the left corner you will see some number..
if it is not hard spl . It should be like this 2.20.0001 =for PPC G4 or for
2.20.0000 =for PPC G3
If it is HARDSPL 2.G4.4PDA for PPC G4 or 2.G3.4PDA for PPC G3.
I think, you didn't hardspl your device.
Last time, I did HARDSPL in order to use others VENDOR ROM. ( xda bmw neo rom limited edition.) and it worked.
But, not sure for you. A bit difficult to see with broken displlay, isn't it?
Hello all. How do I use athenaunlocker? I have download it, and unrar it, and on PC it gives me an error. Should I copy it on memory card, and run it from pda? thank you.
ady_uaic said:
Hello all. How do I use athenaunlocker? I have download it, and unrar it, and on PC it gives me an error. Should I copy it on memory card, and run it from pda? thank you.
Click to expand...
Click to collapse
Hi ady
before we go further I need to know 2 things.
Do you have a HTC athena or variant.
Did you use the wrapper and follow the instructions from here
http://forum.xda-developers.com/showthread.php?t=316846
hello, i have htc x7500 advantage and i want to install the english wm 6 rom, wwe. first i have to unlock it, right?
I didn't used that. if i will, i don't need anymore athenaunlocker? what's the difference between athenaunlocker and hard-spl from that link?
You have to explain WHAT HTC wm6 ROM you want to install First
If you have and old WM5 x7500 just register on www.htc.com and download the HTC OFFICIAL WM6 update for YOUR language!!
ONLY
If your X7500 is SIM LOCKED you need to UNLOCK it first(wrapper isn't for SIM Unlock) and ATHENA UNLOCKER meets your needs
i wanna install this rom: AP Dual 3.0.
ady_uaic said:
hello, i have htc x7500 advantage and i want to install the english wm 6 rom, wwe. first i have to unlock it, right?
I didn't used that. if i will, i don't need anymore athenaunlocker? what's the difference between athenaunlocker and hard-spl from that link?
Click to expand...
Click to collapse
If you want the AP3 0r other roms in the sticky made for SPL 1.2 http://forum.xda-developers.com/showthread.php?t=397518
then you should run the athena wrapper that Olipro has made to be as much foolproof as possible
As he says "your device MUST BE RUNNING WINDOWS MOBLE and MUST BE SYNCED WITH THE PC.
to recap: IF YOU ALREADY HAVE 1.20/1.25, DO NOT USE THIS."
It seems that you must use the same USB port as well.
i have allready downloaded that rom, all i need to know is the difference between that 2 files: activeunlocker and hard-SPL. And, as I saw on a post of that link, i can use one or other from that files. now, tell me, activeunlocker should I copy on PPC? (i will receive it tomorrow, and i want to know what i have to do) Because from PC doesn't work, it gives me an error.
ATHENA UNLOCKER is needed ONLY if you have to unlock the SIM too.
E.G. If your phone, WITH ORIGINAL ROM, can use ANY SIM, you don't need to run ATHENA UNLOCKER
As CMONEX said here
http://forum.xda-developers.com/showpost.php?p=2030747&postcount=81
wrapper is hardspl + customruu
unlocker is hardspl + sim unlocker
SPL means a part of "bios" used ALSO for defining your device language and vendor (HTC, T-Mobile, DOPOD,...) and avodi flashing a "non original" ROM
To flash ANY rom you need to overcome those informations. You can do this running an application, but if something goes wrong during the FLASH and your device doesn't start anymore... you are lost. You can't run the application again, because you haven't the OS!
HARD SPL has been developed to avoid this problem. It is a NEW SPL (1.2 or 3.x) developed from OLIPRO (and CMONEX too for 3.xx) flashed into your device. it is IN the "BIOS" so, even if your OS doesn't start, you can flash ANY ROM
Both, WRAPPER and UNLOCKER will flash HARDSPL. You need only the WRAPPER if your phone can use any SIM!
When you choose the ROM some are build for the SPL 3.x and other using the 1.2 SPL.
With WRAPPER or UNLOCKER you have the 1.2 SPL release, if you want to test a 3.x ROM you need to flash the AP4 rom.
The only differences between SPL 1.2 and 3.x are the "partitioning" of the device. AP4 needs more space for the system files, then the 3.x SPL was developed to increase the System Partition. SPL 3.x flashing IS ONE WAY ONLY, (since Cmonex relase the tool to go back): if you flash AP4 you CAN'T flash any origninal HTC ROM
ady_uaic said:
i have allready downloaded that rom, all i need to know is the difference between that 2 files: activeunlocker and hard-SPL. And, as I saw on a post of that link, i can use one or other from that files. now, tell me, activeunlocker should I copy on PPC? (i will receive it tomorrow, and i want to know what i have to do) Because from PC doesn't work, it gives me an error.
Click to expand...
Click to collapse
Listen to what Sergiopi said.
You will always get an error running these programs unless you have an activesync connection to the ppc when you run the program.
The way you were talking I thought you had already tried to run it on your PPC
sergiopi thank you soo much. you are so kind. thank you.
Hi all, I've created HTC Raphael CustomRUU patched to perform a 'task 32' instead of a 'task 28' after flashing an .nbh, so it will not format your device if you just flash a radio or a splash screen.
How to: Drop the .nbh file of your choice in the same folder as CustomRUU and start flashing.
Everyone NOTE:
AVG and other antivirus's usually detect a virus in CustomRUU.exe, it's false error. Disable your antivirus while downloading and flashing.
If you have problem with your antivirus try the Raphael Wrapper attached, Thanks to cmonex for this
Have fun.
As part of an attempt by the moderation team to keep things organised this thread has been unstickied, members are encouraged to add the info the wiki pages.
Please refer to the "Raphael Goes Wiki" thread for more details.
udK said:
Hi all, I've created HTC Raphael CustomRUU patched to perform a 'task 32' instead of a 'task 28' after flashing an .nbh, so it will not format your device if you just flash a radio or a splash screen.
How to: Drop the .nbh file of your choice in the same folder as CustomRUU and start flashing.
Everyone NOTE:
AVG and other anitvirus's usually detect a virus in CustomRUU.exe, it's false error. Disable your antivirus while downloading and flashing.
Have fun.
Click to expand...
Click to collapse
yes, all of you, turn off your virus scanners and download this stuff........
jonkie said:
yes, all of you, turn off your virus scanners and download this stuff........
Click to expand...
Click to collapse
Thats a pretty impressive first post here....
Seeing the man is a cook for multiple devices, he just might know what he is talking about.
as my wife would say..
If u de wanna jab, u de be sure of proof.
RaphaelWrapper
here's another ruu that doesn't pop up antivirus warning.
I heard some people were having trouble running the first customruu. maybe this helps. (still requires .net framework of course.)
presented by raphael elite team
enjoy!
Thanks cmonex, first post updated.
Yep works fine, might be worth updating the kitchens to reflect this change.
Yup Cmonex Ruu Wrapper works great.
Since Some Guy Called l3v5y nearly bricked my Pro with a clean Rom
(stuck on Preparing your device.......... screen)
Had to Go into Bootloader mannually first, but that also works.
Let's hope the Pro version Flashes. (have to be carefull, l3v5y never sleeps, he might find out i've been bad mouthing his work and ban me)
PS: Even Flash Update Screen looks great on VGA screen, nice crisp and sharp gradient.
Hail to the wrapper
Works perfectly!!
You guys amaze me every time with your skills.
Works Great!
So to get it clear:
The wrapper also does not format the device when only flashing a splash or radio?
What is the difference between the wrapper and the custumRUU anyway?
merten3000 said:
So to get it clear:
The wrapper also does not format the device when only flashing a splash or radio?
What is the difference between the wrapper and the custumRUU anyway?
Click to expand...
Click to collapse
CustomRUU and wrapper do the same job. But wrapper is modified for some antivirus giving false positives... So you can use both...
Cheers
udK said:
Hi all, I've created HTC Raphael CustomRUU patched to perform a 'task 32' instead of a 'task 28' after flashing an .nbh, so it will not format your device if you just flash a radio or a splash screen.
How to: Drop the .nbh file of your choice in the same folder as CustomRUU and start flashing.
Everyone NOTE:
AVG and other anitvirus's usually detect a virus in CustomRUU.exe, it's false error. Disable your antivirus while downloading and flashing.
If you have problem with your antivirus try the Raphael Wrapper attached, Thanks to cmonex for this
Have fun.
Click to expand...
Click to collapse
Sorry but i'm learning, this means that i don't need to install HardSPL?
If i perform a hard reset, i recover the orginal factory radio?
thanks
MenosOcho said:
Sorry but i'm learning, this means that i don't need to install HardSPL?
If i perform a hard reset, i recover the orginal factory radio?
thanks
Click to expand...
Click to collapse
Forget it, i found the answer (i need HardSPL) after write this.
thanks.
MenosOcho said:
Forget it, i found the answer (i need HardSPL) after write this.
thanks.
Click to expand...
Click to collapse
So, please can you explain it to me
I am so confused with all these terms (hard SPL, soft SPL, RUU).
- Do I still need to run the HardSPL, to change ONLY the Radio - or Raphael wrapper.exe is enough ?
- If I need HardSPL, will my device be formatted and lose my data ?
- How I upgrade my Radio ? I have downloaded the upgrade but except from an exe file there is another with nbh extension. How I use this file ?
Can anyone help ?
Does the CustomRUU bypass the CID check so I can flash *ANY* ROM with this tool without HardSPL?
The latest AT&T ROM has a higher SPL that the latest HardSPL and we all know what issues we had with the Kaiser using old or non matching SPL's.
Thanks!
-Mc
error
When I try to use it, the progress bar holds at 0%, and a few minutes later i get an error. does anybody else had this problem and what is the solution,
Thnx
McHale said:
Does the CustomRUU bypass the CID check so I can flash *ANY* ROM with this tool without HardSPL?
The latest AT&T ROM has a higher SPL that the latest HardSPL and we all know what issues we had with the Kaiser using old or non matching SPL's.
Thanks!
-Mc
Click to expand...
Click to collapse
I've got the same problem: my rom is 1.90.772.3... but my radio is 1.02.25.23 and i want .28!!!
thanks!!!
sarantos said:
So, please can you explain it to me
I am so confused with all these terms (hard SPL, soft SPL, RUU).
- Do I still need to run the HardSPL, to change ONLY the Radio - or Raphael wrapper.exe is enough ?
- If I need HardSPL, will my device be formatted and lose my data ?
- How I upgrade my Radio ? I have downloaded the upgrade but except from an exe file there is another with nbh extension. How I use this file ?
Can anyone help ?
Click to expand...
Click to collapse
I'm very confused as well. I would love to do a radio update but I really don't want to do a hard reset.
I know I have to use this customRUU and I already have downloaded the radio file.
Can I start upgrading right away or do I really need to use HardSPL and loose all my data?
You need Hard SPL to use this Custom RUU. Unless you are going to flash a ROM by your carrier. Cooked ROMs, radio's etc require HardSPL.
Flashing a ROM OS will override all your data (well duh )
Flashing a radio, SPL or Splash should not override your data.
Custom RUU does not bypass the CID checks.
Ta
Dave