Hello all. How do I use athenaunlocker? I have download it, and unrar it, and on PC it gives me an error. Should I copy it on memory card, and run it from pda? thank you.
ady_uaic said:
Hello all. How do I use athenaunlocker? I have download it, and unrar it, and on PC it gives me an error. Should I copy it on memory card, and run it from pda? thank you.
Click to expand...
Click to collapse
Hi ady
before we go further I need to know 2 things.
Do you have a HTC athena or variant.
Did you use the wrapper and follow the instructions from here
http://forum.xda-developers.com/showthread.php?t=316846
hello, i have htc x7500 advantage and i want to install the english wm 6 rom, wwe. first i have to unlock it, right?
I didn't used that. if i will, i don't need anymore athenaunlocker? what's the difference between athenaunlocker and hard-spl from that link?
You have to explain WHAT HTC wm6 ROM you want to install First
If you have and old WM5 x7500 just register on www.htc.com and download the HTC OFFICIAL WM6 update for YOUR language!!
ONLY
If your X7500 is SIM LOCKED you need to UNLOCK it first(wrapper isn't for SIM Unlock) and ATHENA UNLOCKER meets your needs
i wanna install this rom: AP Dual 3.0.
ady_uaic said:
hello, i have htc x7500 advantage and i want to install the english wm 6 rom, wwe. first i have to unlock it, right?
I didn't used that. if i will, i don't need anymore athenaunlocker? what's the difference between athenaunlocker and hard-spl from that link?
Click to expand...
Click to collapse
If you want the AP3 0r other roms in the sticky made for SPL 1.2 http://forum.xda-developers.com/showthread.php?t=397518
then you should run the athena wrapper that Olipro has made to be as much foolproof as possible
As he says "your device MUST BE RUNNING WINDOWS MOBLE and MUST BE SYNCED WITH THE PC.
to recap: IF YOU ALREADY HAVE 1.20/1.25, DO NOT USE THIS."
It seems that you must use the same USB port as well.
i have allready downloaded that rom, all i need to know is the difference between that 2 files: activeunlocker and hard-SPL. And, as I saw on a post of that link, i can use one or other from that files. now, tell me, activeunlocker should I copy on PPC? (i will receive it tomorrow, and i want to know what i have to do) Because from PC doesn't work, it gives me an error.
ATHENA UNLOCKER is needed ONLY if you have to unlock the SIM too.
E.G. If your phone, WITH ORIGINAL ROM, can use ANY SIM, you don't need to run ATHENA UNLOCKER
As CMONEX said here
http://forum.xda-developers.com/showpost.php?p=2030747&postcount=81
wrapper is hardspl + customruu
unlocker is hardspl + sim unlocker
SPL means a part of "bios" used ALSO for defining your device language and vendor (HTC, T-Mobile, DOPOD,...) and avodi flashing a "non original" ROM
To flash ANY rom you need to overcome those informations. You can do this running an application, but if something goes wrong during the FLASH and your device doesn't start anymore... you are lost. You can't run the application again, because you haven't the OS!
HARD SPL has been developed to avoid this problem. It is a NEW SPL (1.2 or 3.x) developed from OLIPRO (and CMONEX too for 3.xx) flashed into your device. it is IN the "BIOS" so, even if your OS doesn't start, you can flash ANY ROM
Both, WRAPPER and UNLOCKER will flash HARDSPL. You need only the WRAPPER if your phone can use any SIM!
When you choose the ROM some are build for the SPL 3.x and other using the 1.2 SPL.
With WRAPPER or UNLOCKER you have the 1.2 SPL release, if you want to test a 3.x ROM you need to flash the AP4 rom.
The only differences between SPL 1.2 and 3.x are the "partitioning" of the device. AP4 needs more space for the system files, then the 3.x SPL was developed to increase the System Partition. SPL 3.x flashing IS ONE WAY ONLY, (since Cmonex relase the tool to go back): if you flash AP4 you CAN'T flash any origninal HTC ROM
ady_uaic said:
i have allready downloaded that rom, all i need to know is the difference between that 2 files: activeunlocker and hard-SPL. And, as I saw on a post of that link, i can use one or other from that files. now, tell me, activeunlocker should I copy on PPC? (i will receive it tomorrow, and i want to know what i have to do) Because from PC doesn't work, it gives me an error.
Click to expand...
Click to collapse
Listen to what Sergiopi said.
You will always get an error running these programs unless you have an activesync connection to the ppc when you run the program.
The way you were talking I thought you had already tried to run it on your PPC
sergiopi thank you soo much. you are so kind. thank you.
Related
I have upgraded my 838pro to IPL - 1.04, SPL- 2.10 Olipro , Radio 1.43.00.00, OS is Black Majik .
Is it possible to upgrade from officially released wm06 rom from dopod (when its released), will it work, or give me problems.
I am newbie to upgrades. so i dont know technical things like hardspl etc.
Thanks
Pramod Naidu
Yes it is possible, but your SPL will be overwriten..
If you want to keep HardSPL, you need to extract the official SPL from the official ROM so it doesn`t get flashed onto your device
Shamanix said:
Yes it is possible, but your SPL will be overwriten..
If you want to keep HardSPL, you need to extract the official SPL from the official ROM so it doesn`t get flashed onto your device
Click to expand...
Click to collapse
INCORRECT sir.
HardSPL will not allow a retail SPL to flash over it.
The RUU which HTC will no doubt supply it with will probably not detect your device correctly (since you are using a superior SPL hehe).
Copy ther nbh file contained in the update to a folder and use RUUWrapper.exe which will flash it no problem (use autodetect).
One more foolish question
Is my device super CID bec of hardspl, if not, if i make my device super cid, will it give me added benefits.
viewedit said:
Is my device super CID bec of hardspl, if not, if i make my device super cid, will it give me added benefits.
Click to expand...
Click to collapse
The only benefit of SuperCID is you can read/write to the ext_rom in windows mobile.....so not really a great benefit.
HardSPL reports itself as SuperCID.....but your device is NOT. Essentially your device is virtually SuperCID.
Thanks
Thanks a lot sir.
Pramod Naidu
When I have gone back from a WM6 ROM to the Official (WM5) AT&T ROM I flashed the older (1.04 I wanna say?) version of HardSPL and it works fine and gets overwritten to the 1.11. Then if I go back to WM6 I just reflash HardSPL v7 and it works fine. I'm not sure if that actually does make it official, but I know based on the startup and bootloader screens, after going to the old HardSPL then using the AT&T Updater, everything says 1.11 and looks the same as it did before I started putting cooked ROMs on my phone.
What if its exe file
how do i extract the nbh from exe file.
How to extract nbh from exe
how do i extract nbh from exe to flash it to hardspl, i dont want to downgrade my spl
Use winrar.
Right click on the file and "open with winrar"
Question?
mrvanx said:
INCORRECT sir.
HardSPL will not allow a retail SPL to flash over it.
The RUU which HTC will no doubt supply it with will probably not detect your device correctly (since you are using a superior SPL hehe).
Copy ther nbh file contained in the update to a folder and use RUUWrapper.exe which will flash it no problem (use autodetect).
Click to expand...
Click to collapse
Hi mrvanx,
Just a quick question regarding your answer to Shamanix...
You said here that all he needs to do is copy the their nbh file in the update and use the RUUWrapper to flash it... Surely he needs to extract only the rom, ext rom, and radio? Then recompile to a nbh file to flash?
The original nbh file is still going to contain the spl & ipl which will cause problems not so?
Sorry if i am butting in here
Regards.
Trezona said:
Hi mrvanx,
Just a quick question regarding your answer to Shamanix...
You said here that all he needs to do is copy the their nbh file in the update and use the RUUWrapper to flash it... Surely he needs to extract only the rom, ext rom, and radio? Then recompile to a nbh file to flash?
The original nbh file is still going to contain the spl & ipl which will cause problems not so?
Sorry if i am butting in here
Regards.
Click to expand...
Click to collapse
The flash will go ahead as normal but the SPL and IPL will NOT be written over.
Either that or just use the repackaged version of the official WM6 dopod ROM ive posted in the WM6 section.
mrvanx said:
The flash will go ahead as normal but the SPL and IPL will NOT be written over.
Either that or just use the repackaged version of the official WM6 dopod ROM ive posted in the WM6 section.
Click to expand...
Click to collapse
Great! i understand, thanks!
Regards.
hi all,
i've just bought a t-mobile vario 2
i;ve read the wiki & a few of the posts regarding upgrading
but to be honest it has so much information & sometimes the information is contradictory.. so it gets confusing
i've been using the uni for a year now
my point is
i want 2 upgrade my hermes 2 wm6
my boot screen says
herm300
IPL-1.01
SPL 1.40.Olipro
i can use a different/other sim card than t-mobile
how do i chek if my hermes is CID unlocked
and what radio i'm using & what's my bootloader number??
i try 2 read the splash screen after soft reset but the radio version goes away pretty fast
do i run POF's unlocker v3a? is it safe to run again, even if my phone is cid unlocked?
in order 2 upgrade 2 wm6
do i need to install olipros hard spl 2.10? and then run customruu?
this is what i mean by confusing?
i've upgraded my magician, uni & wizard
however they all had pretty easy/self explanatory directions?
i'm sorry for sounding like a noob, but its new territory....
thanx in advance
Is there a specific reason you want to CID the device? T-Mobile's data plan s pretty great so I have never seen the need to use another sim in my vario. You dont need to CID unlock to upgrade the rom.
As long as you have installed Olipro's spl to protect against bricking your phone it should be fairly safe to install a wm6 rom. If not, definitely install the current version of hard spl.
Once you have installed SPL, you then run the RUU.exe file that usually comes with the rom. Tha majority will have a tick box on the first page that says auto detect, which will check which version of spl you have installed and then run itself accordingly. It is best to have the current hardspl installed though.
Most of them dont touch your extended rom and only replace the OS rom contents. T-Mob's wm5 extended rom customizations wont work with wm6 anyway so you will need to go looking here for a cab file called (I Believe) tmobileukfixed.cab.
You will also need to look for newer versions of your pocket pc software as some older ones dont play nice with WM6.
Good luck, and if in doubt, read MrVanx's upgrade guide here: http://www.mrvanx.org/cms/
chrisjasper said:
Is there a specific reason you want to CID the device? T-Mobile's data plan s pretty great so I have never seen the need to use another sim in my vario. You dont need to CID unlock to upgrade the rom.
As long as you have installed Olipro's spl to protect against bricking your phone it should be fairly safe to install a wm6 rom. If not, definitely install the current version of hard spl.
Once you have installed SPL, you then run the RUU.exe file that usually comes with the rom. Tha majority will have a tick box on the first page that says auto detect, which will check which version of spl you have installed and then run itself accordingly. It is best to have the current hardspl installed though.
Most of them dont touch your extended rom and only replace the OS rom contents. T-Mob's wm5 extended rom customizations wont work with wm6 anyway so you will need to go looking here for a cab file called (I Believe) tmobileukfixed.cab.
You will also need to look for newer versions of your pocket pc software as some older ones dont play nice with WM6.
Good luck, and if in doubt, read MrVanx's upgrade guide here: http://www.mrvanx.org/cms/
Click to expand...
Click to collapse
i dont live in the uK
so the tmobile plan is not the usp
i need to unlock the extende rom as i like 2 install most of my progs on the extended rom and also my ringtones as the sd card takes a cople of seconds b4 it kicks in..
check the wiki under Bootloader information.
Using mtty, there is a command to check CID status.
todd_jg said:
check the wiki under Bootloader information.
Using mtty, there is a command to check CID status.
Click to expand...
Click to collapse
hi
i've managed 2 find out that my phones supercid
however i cant get mtty 2 work
i put the phone in bootloader
then i conect the phone via usb
when i rum mtty
it says usb port cannot open
i tried mtty 1.42 as well.....
I installed Olipro Hard SPL and am now able to try any wm6 ROM without SPL.
After having tried many of them, I would like to downgrade and try the last Qtek shipped ROM for wizard: QT_FR_9100_2170706_21707106_20710_180406.
But no matter how I try, I'm now unable to install that wm5 ROM.
Even my former SPV M3000 shipped ROM refuse to re-install.
I guess it's either a problem of RUU, or more probably a problem of SPL on those ROM.
I'd like to remove their SPL, but I don't know how to do.
Any tutorial, advice, or special no ID RUU that fits well those wm5 ROM?
The actual problem with this Rom is the RUU.
It won't let you downgrade.
However it is wise to get rid of the IPL/SPL, for safety and for keeping the hard SPL.
You can use typho5.exe to disassemble the ROM in parts, and use nbftool to re-assemble it without using the IPL/SPL.
They are available in the ROM kitchens.
Use the ruu in the hard spl thread for flashing.
Thanks for the reply, Equinoxe.
Actually I've already tried many RUU, not only the Ruu already included in the official ROM.
Mun RUU etc. But no luck, all kind of error occured but the the flashing remains impossible.
I'll try to find the tools you told me about and see whether removing IPL/SPL makes it easier to flash those ROM.
If you know any special RUU suitable for such a downgrade, please, let me know.
riri22 said:
Thanks for the reply, Equinoxe.
Actually I've already tried many RUU, not only the Ruu already included in the official ROM.
Mun RUU etc. But no luck, all kind of error occured but the the flashing remains impossible.
I'll try to find the tools you told me about and see whether removing IPL/SPL makes it easier to flash those ROM.
If you know any special RUU suitable for such a downgrade, please, let me know.
Click to expand...
Click to collapse
If Mun's RUU didn't do the trick, you better use the CORE pro kitchen.
You can extract the parts with typho5.exe
usage:
typho5.exe -x nk.nbf
all the parts will be created/extracted
Delete all the IPL_1 IPL_2 SPL_1 and SPL_2 parts
use nbftool to reassemble the ROM. (read the PDf to see the starting addresses, although nbftool should be patched to show the right addresses)
Good luck
EquinoXe
the-equinoxe said:
If Mun's RUU didn't do the trick, you better use the CORE pro kitchen.
You can extract the parts with typho5.exe
usage:
typho5.exe -x nk.nbf
all the parts will be created/extracted
Delete all the IPL_1 IPL_2 SPL_1 and SPL_2 parts
use nbftool to reassemble the ROM. (read the PDf to see the starting addresses, although nbftool should be patched to show the right addresses)
Good luck
EquinoXe
Click to expand...
Click to collapse
Hi Equinox, thanks for the reply.
I started trying to get typho working, but all I could see was a brief command prompt and nothing else.
Finally, I ended up using Molski DevPack, which already includes those tools, in quite an ergonomic way.
After finding a guide about using those tools, It took me, no kidding about 10 mn for the whole process and 5 more to do the flashing.
I used nb2nbf_wizard to reassemble the ROM with only the parts I wanted to keep, including the extended ROM.
Regarding the address, it did it automatically, except for the HTC logo that I did manually, and also for the name of the Extended and Logo I renamed according to the sample jpeg showing that soft in action.
Since I kept the extended ROM and the original splash and logo screen, and I now have an authentic Qtek Wizard, just for fun.
But the most important is the feeling of building one's own ROM, according to your own taste and choice. Wonderful.
You were right: after having removed SPL/IPL and rebuilt the ROM, the Mun RUU worked flawlessly to flash my so called Qtek ROM onto my wizard.
In the meantime, It got rid of the pile of miscellanous splash screens and logos that were left since the install of all previous wm6 ROM.
Thanks again for the tips.
P.S.: the guide I used to understand how to use the Molski DevPack:
http://forum.xda-developers.com/showthread.php?t=320910&highlight=RUU_2001
Can't update rom anymore
Info about phone
WIZA200
IPL 2.21.0001
SPL 2.21.olip
GSM 02.19.11
OS 6.0.0.0
TNT_5.0_Wizard_TouchFLO
Windows XP
Active Sync 4.5 (Works Fine)
When i try to install another ROM i get communication error[224] : DEVICE NOT RESPONDING
When i try to install Cert_SPCS.cab or EnableRapi.cab or TomTom i get installation of xxxx.cab was unsuccessful.
Please help
Hello friends,
I have some question, My Rom was TNT4 because of more hanging my device I installed TNT 5, but this Rom is hanged my device more than TNT4.
I want to use Maxniper Roms. so i have some question:
1- Can I install new WM6 or WM6.1 or WM7 Roms to my PPC witouht Hard SPL?
2- WHat is Hard SPl? is it needed for new ROMs or for all WM6 roms such as TNT4 or TNT5 or Aserg AKU3.13(WM5) ?
3- Can i come back to past SPL?
my device is I-mate Jamin
Thanks
For easy explanation about hardSPL, check THIS thread.
For further info, check THIS thread.
duato said:
For easy explanation about hardSPL, check THIS thread.
For further info, check THIS thread.
Click to expand...
Click to collapse
Dear Friend,
I read all posts about HardSPL
But the question is:
What's the differ between Old Method and New Method(Hard SPL)?
If I install PDIViet_Temp rom first and Install new WM6 or WM6.1 or 7 after it hanging in boot screen and freezing is apperar and IF i use HardSPL method the problems not occur?
Thanks
WHy is needed ?
* More STORAGE area ! the smaller the os.nb the larger your storage!
I encourage all of you who haven't tried this method yet, to try this method. Specially if your favorite rom is relatively a clean rom and consequently has small os.nb. If you want to know how much extra storage you will get by using this method subtract the size of the os.nb (in kb) from 58,368. the difference will be the amount of storage you will gain when you try this new method.
* Faster and safer Rom Upgrade.. If you do install PDAVIET first and overwrite its Data later. It takes more time.
Without HARDSPL. Big Storage mode can't be use.
hma4 has wrote it. Why no one read it??
http://forum.xda-developers.com/showthread.php?t=350033
You can always revert your spl by flashing an operator ROM such as teh Orange WM5 ROM available on the FTP server.
Or O2 ROM Germany.
Info on O2 Germany Website HERE
Download XDA neo original ROM.Version 215447 2154140 021921 (ca. 50 MB)
HERE
or XDA neo RACE Edition.Version 215448 2154141 021921 (ca. 51 MB)
HERE
Different between them?
Nothings different, just first and second SPLASH Screen. And Price Different for XDA Neo Race Edition.
Race Edition is more expensive.
What's the differ between Old Method and New Method(Hard SPL)?
Click to expand...
Click to collapse
Old method needs to downgrade before you can upgrade. It needs batch files as well as ROM files etc.
If I install PDIViet_Temp rom first and Install new WM6 or WM6.1 or 7 after it hanging in boot screen and freezing is apperar and IF i use HardSPL method the problems not occur?
Click to expand...
Click to collapse
This is because HardSPL prevents certain checks being performed, so that the ROM can boot without being an official ROM. Without it, the SPL part of the loading mechanism refuses to boot the OS and instead reverts to bootloader.
The official way to upgrade your Prophet is to use the Rom Update Utility (RUU) provided by your vendor. The RUU is very convinient; it has all the OS files packed together in one archive, so nothing can be misplaced and it is executed just by connecting your device to your PC, no preparation needed. This RUU has the nasty habit the check your Prophet by using the SPL. If your device isn't the same brand (like Q-tek, Dopod, O2, XDA, etc, etc,) it just refuses to work. Because of this it was practical unpossible to post a universal upgrade overhere.
Some genius people developped a way to replace the OS through the "backdoor". With the help of this set of hacking tools it became possible to upgrade your Prophet with a universal, homemade ROM. However, because of the complexity of this method (now refered to as the "Old Method") it was very funurable to errors an needed a lot of preparation. Also the OS-file cannot be combined in one single archive as with the RUU. The cange of loosing or misplacing one is there.
So the challenge became to find a way to use the RUU without the check. So other genius people find out a way to manipulate the SPL so the RUU will bypass its check and will work as if it was released by an offical vendor.
This SPL manipulation can be done for one time use only use SoftSPL (JumpSPL), the original SPL will stay resident but is bypassed prior to running the RUU. If you flash a lot this method is time consuming, but the advantage is that it won't interfere with your device (except upgrading the OS ofcourse...)
An other way is to use HardSPL. This will replace your SPL with a manipulated version wich will stay resident until you install another SPL. This way the first flash-cycle will be a bit complicated but the following atempt will be as easy as connecting your device to a non-Vista PC and run the provided RUU.
The downsite of this successtory is that it installing the HardSPL seems to be a tricky procedure where a lot of people obvious are making a lot of mistakes.
Hi to everybody.
I have an Hermes 200 Vodaphone VPA compact 2 v1605.
I wanna put into this pda the latest Schap's 4.31 ROM.
I have done the mrVanx procedure and I have successfully installed the 2.10 Hard-SPL-V7.
Now I wiil explain my two problems:
- I don't know if my pda is CID unlocked or not... With the HardSpl flashed on my pda, should I be scared about that or not?
I think HardSPL turn my pda into supercid... right?
- If ROM flashing procedure will be stopped by a pc crash, I can unbrick my pda easily? In wich way?
Should I use the mrVanx guide to flash pda or I follow microsd guide?
Many thanks
I should have read the wiki. Either way, and since nobody helped me when i needed and i had to find it all by myself, i know how frustrating it might be. So ill give u hand.
First go here:
http://forum.xda-developers.com/showthread.php?t=293665
Download that tool that will superCID ur phone and Hard SPL it automatically. Pay attention to every step.
After that, and since the hard spl installed by that tool is rather old, go here:
http://www.mrvanx.org/thg/index.php?option=com_content&task=view&id=16&Itemid=26
In the middle of that tuturial u will find the link to the mostly used version of hard spl and how to update ur rom to one of the cooked ones around here.
Soz if my english aint perfect but im not english nor american though.^^
Thanx for reply. But i think you haven't understand my question.
I think my pda is already SuperCID because i have installed the 2.10 HardSPL.
Somewhere in this forum or in the wiki i found that if I flash my pda with 2.10 HardSPL I don't have to use unlocker because this version allow SUPERCID mode.
Am I wrong???
My pda is also already sim unlocked. Infact it is Vodofane (english or german) but i can use TIM italian sim card without problems.
Now my question is:
If I write the schap's ROM with SD procedure, should I scared about RADIO ROM damage?
I found that schap's ROM doesn't modify RADIO, right?
..so i think that SD procedure is the safer way.
Thanks
Not really, most if not all cooked roms DON'T have the radio rom cooked in as there is no perfect rom for everyone, its carrier compliant. Just because a new radio rom comes out doesn't mean its going to improve your reception or battery life, sometimes it causes problems, hence the chefs give you the option of what radio to use.
Now, Hard SPL is only a safety net, things can still go wrong but if they do there is a load of information on how to fix it, ESPECIALLY if you've installed Hard SPL. Make sure its version 7 so the spl reads as 2.10 olipro when you enter bootloader (power button, ok button above flywheel and reset with stylus, hold in until you get to tricolour screen). Just soft reset with stylus to get out.
Personally, as you have Hard SPL, I'd use the sd card method to flash your os. Its on the forum MANY times over. A quick search should find it. VERY EASY and, I believe, safer than using the pc. Just make sure the battery is charged.
Hope this helps....
Cheers....
sfrangebob said:
Hi to everybody.
I have an Hermes 200 Vodaphone VPA compact 2 v1605.
I wanna put into this pda the latest Schap's 4.31 ROM.
I have done the mrVanx procedure and I have successfully installed the 2.10 Hard-SPL-V7.
Now I wiil explain my two problems:
- I don't know if my pda is CID unlocked or not... With the HardSpl flashed on my pda, should I be scared about that or not?
I think HardSPL turn my pda into supercid... right?
- If ROM flashing procedure will be stopped by a pc crash, I can unbrick my pda easily? In wich way?
Should I use the mrVanx guide to flash pda or I follow microsd guide?
Many thanks
Click to expand...
Click to collapse
The guide on MrVanx page does not have the images. Is thare a copy of it somewhere with the full ilustrations?
Thanks.
Yes i have HardSPL v7 2.10 installed on my pda.
This mean I'm in supercid mode and I'm able to flash any rom. right?
I haven't to use the sim cid unlcker, right?
I haven't understand this:
At the moment I don't want to change my RADIO ROM.
Latest schap's ROM doesn't modify RADIO so my radio ROM remain the same. Is this true?
If I flash schap's ROM should I to flash a RADIO ROM that works with schap's one? Or does my RADIO continue to work?
sfrangebob said:
Thanks.
Yes i have HardSPL v7 2.10 installed on my pda.
This mean I'm in supercid mode and I'm able to flash any rom. right?
I haven't to use the sim cid unlcker, right?
I haven't understand this:
At the moment I don't want to change my RADIO ROM.
Latest schap's ROM doesn't modify RADIO so my radio ROM remain the same. Is this true?
If I flash schap's ROM should I to flash a RADIO ROM that works with schap's one? Or does my RADIO continue to work?
Click to expand...
Click to collapse
I have a brand new hermes since last week and i passed a lot of blocking and stucking in the bootloader. However, the first ROM i installed was Schaps one and on that time i didn't even have my phone Hard SPL'ed or SuperCID'ed! I used that tool of SSPL. But if u say ur phone is already Hard SPL you will have no problems installing the schaps rom. In addition, the RADIO ROM will not be modified with his rom. I must say that besides his ROM was installed perfectly, there are some other cooked ROMs that require your phone to be SuperCID'ed.
Thanks for your reply.
the RADIO ROM will not be modified with his rom
Click to expand...
Click to collapse
Is this a good thing or bad one?
I mean: my pda now has no problem about RADIO and I don't want to change nothing about RADIO ROM.
If i flash schap's ROM the pda continue to work well with my RADIO? or the schap's ROM work well with some RADIO ROM an bad with other.
Thanks
You won't change your radio rom and yes it will still work with ANY rom you use (as long as its for the Hermes).
ok!!!
Now it's time to flash.
Thanks a lot!!
good flash^^
Zero|Cool said:
good flash^^
Click to expand...
Click to collapse
Thanks.
In your signature i found that you use a CRC's ROM.
Also crc's rom doesn't modify RADIO and can work well on my pda?
sfrangebob said:
Thanks.
In your signature i found that you use a CRC's ROM.
Also crc's rom doesn't modify RADIO and can work well on my pda?
Click to expand...
Click to collapse
It works good on mine. And no, it doesnt modify your ROM.
As stated before, the chefs tend to let YOU decide what radio to use... There is no perfect radio rom and location/carrier seems to determine what is the best radio for you.
Cheers...
I put the rom in microsd renamed in HERMIMG.nbh
I start the bootloader withe ok + power + stylus but the flash procedure doesn't start. I have only the bootloader screen with 4 rows:
RED HERM200
IPL-1.04
HERM200
SPL-2.10 OLIPRO
GREEN
BLUE
WHITE SERIAL
what's the matter?
p.s.
I'm using a 2g sandisk
with 1gb microsd sandisk it works!!
Flash successfull!!
Thanks to everybody
sfrangebob, it should work with a 2gb too, It needs to formatted fat32 though.
Congrats and welcome to the wide world of Phone upgrading...
DISCLAIMER - Phone flashing can be addictive....
I know.. I formatted it many times but the flashing operation doesn't start.
With 1 gb it starts on the first attempt.
ahah flash addciction