hi
where can i get italian rom for htc 7500?
pda was in italian language,tryed to flash with wwe but it disconected in the middle of flashing,now it shows "htc" on white screen,m oa,g o2...,after 2 seconds 2 more-r 1.38.00.00 and g 32.71.7020.12h-after 2 more seconds all small letters gone and stays on "htc" on white screen forever,untill soft reset,the power button dont work,vol down and reset goes 3 color disp.
tryed all the roms on ftp,got "inv vender id" with all of them,tryed many times,even with pof's athenaspl its 'inv vender".
tnx for help
Hi,
i have the same thing.
The only thing is waiting for a release of your spanish rom.
Or wait for someone who could unlock cid, and flash with a rom.
will ask imei-check
It costs 30£ for unlock more 15£ for return shipment.
so they cant unlock it
in mtty info 2:HTCSHTC__405 €¾VHTCE
which cid is it?
tnx
when you connect your phone does it recognize with activesync ?
Related
hi i had shaps wm6 installed , and then tried to upgrade my radio , it went to 2 % then came back with a error messege , my phone is now stuck in bootloader , any fixes?
in bootloader it says herm300
IPL-1.04
SPL-2.10.0ipro
solved it useing hard flash , thanks !
flashed phone with the lasest unlocker software , but now all i get is the htc smart mobility splash screen ?
mda herm300 it only shows t-mobile screen
got a mda herm300 it only shows t-mobile screen when power on (someone has unlock wrongly)
how can i fix this problem
it can enter bootloader mode by pressing side ok+power+reset
plz give me steps detail and softwares
thanks in advance
digiview said:
got a mda herm300 it only shows t-mobile screen when power on (someone has unlock wrongly)
how can i fix this problem
it can enter bootloader mode by pressing side ok+power+reset
plz give me steps detail and softwares
thanks in advance
Click to expand...
Click to collapse
Have you tried:
- Hard Reset
- Reflashing
- Rerunning the unlocker
- Mtty task 28
digiview said:
got a mda herm300 it only shows t-mobile screen when power on (someone has unlock wrongly)
how can i fix this problem
it can enter bootloader mode by pressing side ok+power+reset
plz give me steps detail and softwares
thanks in advance
Click to expand...
Click to collapse
The forum is NOT for ASKING for help. The forum is FOR reading and then asking...
Recovered From Stuck on Bootloader & Splash Screen
Hi,
I had the same problem (1st stuck on bootloader- reflashed custom ROM then Stuck On Splash Screen with no GSM) on my SPV M3100 after a failed radio upgrade first it was stuck in bootloader for the longest time while i searched and re-tried uprading the radio rom inbetween using recover tools like mitty.exe and NBHextract but nothing happend until i had a brainstorm i had previosly downloaded an original vendors ROM for the Hermes so i flashed it and Pow Pow Pow - Radio and Software Rom back to normal and working OK!!!
Mine is X01HT Japanese docomo ROM
When I try any flash activeSync disonnect and closes just after I click on the last screen RRU upgrade button.
True with any rom rru
Any idea ?
This is normal. The program used to flash the ROM will put the device into bootloader mode (colored bars on the screen) and this will cause activesync to disconnect. Just keep waiting and you will see the progress bar that shows the flash progress.
Yes but then the RRU ends in error telling that connexion to phone is not possible
I have seen an other thread saying that with Softbank Hermes RRU does not work
Same Problem Please HELP
athomelin said:
Mine is X01HT Japanese docomo ROM
When I try any flash activeSync disonnect and closes just after I click on the last screen RRU upgrade button.
True with any rom rru
Any idea ?
Click to expand...
Click to collapse
My Orange SPV 3100 was locked on orange and I SIM unlocked only with the help of HTC_Hermes_SIM_CID_Unlock_v3a it worked fine and I now I am using O2 on it
However, now I wish to upgrade it to official wm6 from Orange or HTC it does not work it say USB not connected...and gets stuck on 4 colour boot screen.
Please any suggestion. HELP!
Same Issue
After using the HTC_Hermes_SIM_CID_Unlock_v3a whenever I run a new RRU it goes to the bootloader screen, then disconnects as normal, however when it reconnects activesync doesn't start up
Any help?
Hi,
I had a WM6 Rom, pre-release, one of the Self Made available here ... I do not remember which one of the versions ...
I wanted to put the official WM6 rom, so this morning I downloaded and I tried to install it.
The installation started with my Tytn connected, the Tytn screen switched to HERM IPL-1.00 and the Red, Green, Blue, White Stripes ... and the installation continued.
Then I received a connection error from the Program ...
Now my Tytn is stuck on the "Stripes" Screen and even removing the battery and resetting ... the Stripes screen is always there ...
Any Clue ?
Thanks !
submaru said:
Hi,
I had a WM6 Rom, pre-release, one of the Self Made available here ... I do not remember which one of the versions ...
I wanted to put the official WM6 rom, so this morning I downloaded and I tried to install it.
The installation started with my Tytn connected, the Tytn screen switched to HERM IPL-1.00 and the Red, Green, Blue, White Stripes ... and the installation continued.
Then I received a connection error from the Program ...
Now my Tytn is stuck on the "Stripes" Screen and even removing the battery and resetting ... the Stripes screen is always there ...
Any Clue ?
Thanks !
Click to expand...
Click to collapse
Ok ... Classic noobing: do a search before posting ... I am looking at the "Help post for bricking" and trying the solutions, but I have to understand why bricked ...
I love this forum ...
Recovered my Tytn: I was in this case
SPL 1.01MFG
HTC_BOOT Any
Boot OS No
No GSM? No
KITL No
Diagnostic Solution: Stuck in bootloader after flash Mtty: "set 14 0" and "task 8" if doesn't help flash OS.nb again.
With those magic command, my Tytn restarted and booted !!!
Some more informations:
I have Rom WM 6.0 Custel 2.5 Version (ROM Date 04/17/07)
Radio Version 1.43.00.00
Protocol Version: 32.76.7020.19H
I tried to flash the Official HTC WM6 Italian, and you know the result ... What's worng ? Thanks
hi every 1 ...
here is the situation i'm in:
i tried to upgrade my HTC Touch Dual with an HTC Touch official ROM ,i prosed with the operation but it did not complete for an error then my phone was stuck on the three colors Screen after that I've reseted the phone ( hard reset ) by pressing the call ,end call ,power and reset buttons all together and here...i realized that i made a disaster because that my phone is not starting and make no response on the screen and it's totally black and when i connect it to the PC ,the indicator light led torn's red!!! and the PC dose not see it i tried to hard reset it again it didn't work.
Please help me ....
Regards.
hi
hey m8 i had this problem b4 also i just ran a different rom whilst it was in the tri colour screen and it was all up and working again.
hope this helps
kind regards Martin J
Thank's 4 the fast response bro but the problem that is when i flashed the phone with wrong ROM i had the tri color screen but after that i hard reseted the phone as i described above and the phone went died and red lid light indicator on USB cable.
Regards
Saif Al.Deen.
have you tried to enter the bootloader?
yes i did if it mean's pressing the camera and the reset button together but i learned this method in an HTC Touch thread replay so if it's the same (pressing the camera button and the reset button by the styles) it means that I've also tried it and did not work. and please ,if there is any other way to enter the Bootloader just feel free to tell me about it cuz i think that when i get the tri color screen again i will able to flash the phone with official English ROM of WM 6.1 that I've downloaded from the HTC site unless there is some thing that i don't under stand.
thank's Midget.
http://wiki.xda-developers.com/index.php?pagename=Enter in bootloader
I did use the method (pressing Power+Camera+Reset) and I've got the tri-color screen the PC saw the phone and I've got the "USB" text on the phone screen then i started the ROM upgrade utility then i noticed the text under the tri-color is changing once "Serial" and another "USB" and so on until it stay's on the "Serial" and the upgrade utility show's an "Exit" button ,i press it ---> it exit's!!!.then i just disconnected the phone and reconnected it to the USB the tri-color showed the "USB" text then i started the ROM upgrade utility and got the same results.then i soft reseted the phone by the styles and get back to the same old situation ( black screen and red led on connection) and the phone is not entering the tri-color mode using the same method using the same method u linked me in ur last replay (pressing Power+Camera+Reset)!!!!!!!!
What should i do ...
please help me coz no one to ask near me and we have no HTC center here in Iraq and it look's like that i'm the only one who carry an HTC phone in my hole country!!!
Now ...here is what I've got:
thankfully managed to get back to the tri-color screen it seem's that i had a problem with USB cable ,any way ...i started the ROM upgrade utility that i downloaded from the HTC official web site that named (RUU_Nike_HTC_WWE_2.09.405.1_Radio_NikeMR_1.65.28.25_signed_Ship) at the first time i had a connection error 260 then i disconnected the phone then reconnected it the PC saw the phone and the upgrade utility did too and started to upgrade the ROM but when it reached 1% i had this error (ERROR [294] INVALID VENDER ID ) with an "Exit" button !!!!!!!!!!!!!!
It's some kind of a progress .. right..but what's wrong ?? Q/ is the ROM ?? A/ I downloaded it from the official web site and it's for the HTC Touch Dual...then what????
Please do not let me down ... my hops are only on ur experiences.
Regards.
Now ...here is what I've got:
thankfully managed to get back to the tri-color screen it seem's that i had a problem with USB cable ,any way ...i started the ROM upgrade utility that i downloaded from the HTC official web site that named (RUU_Nike_HTC_WWE_2.09.405.1_Radio_NikeMR_1.65.28.25_signed_Ship) at the first time i had a connection error 260 then i disconnected the phone then reconnected it the PC saw the phone and the upgrade utility did too and started to upgrade the ROM but when it reached 1% i had this error (ERROR [294] INVALID VENDER ID ) with an "Exit" button !!!!!!!!!!!!!!
It's some kind of a progress .. right..but what's wrong ?? Q/ is the ROM ?? A/ I downloaded it from the official web site and it's for the HTC Touch Dual...then what????
Please do not let me down ... my hops are only on ur experiences.
Regards.
sparketo said:
thankfully managed to get back to the tri-color screen
Click to expand...
Click to collapse
That's good. Ready to flash again.
RUU_Nike_HTC_WWE_2.09.405.1_Radio_NikeMR_1.65.28.25_signed_Ship) ...started to upgrade the ROM but when it reached 1% i had this error (ERROR [294] INVALID VENDER ID ) with an "Exit" button !!!!!!!!!!!!!!
Click to expand...
Click to collapse
The phone is locked to a particular phone company. You'll need to unlock it first. So, a bit more work needed. Follow this thread. but make sure you read it carefully:
http://forum.xda-developers.com/showthread.php?t=395945
Ok now...here is the situation:
as u advised ,i went to http://forum.xda-developers.com/showthread.php?t=395945 and it say's in (1.) that i must have a HardSPL 1.15 MFG installed (i have SPL 1.18 installed) then i went to the thread http://forum.xda-developers.com/showthread.php?t=355730 to get the HardSPL 1.15 MFG and i've found it but here is the problem:
in step (4.) i have to install sspl 1.16 nike.exe by copying it to the phone memory ,but i only managed to enter the tri-color screen and i can not copy any thing in to my phone so who am i gonna install it??? then i saw the other attached files flash-hardspl-niki.zip and flash-splash-niki.zip and all others ,what i get when i start the utility after unzipping the attachment is error in connection and the bar stay's on 0% and start the recovery system....
by the way ...all i see on the tri-color screen is the following:
RUUNBH on the right upper side of the screen.
NIKI 100 ,SPL-1.18.0000 and CPLD-4 on the upper left side of the screen in the red bar.
USB of Serial in the bottom wight bar.
thank u all 4 ur effort ,but i have no place else to ask for help....
so please stay with me to the end ...i hope it will be a happy end.
Thank's
sparketo said:
what i get when i start the utility after unzipping the attachment is error in connection and the bar stay's on 0% and start the recovery system....
by the way ...all i see on the tri-color screen is the following:
RUUNBH on the right upper side of the screen.
NIKI 100 ,SPL-1.18.0000 and CPLD-4 on the upper left side of the screen in the red bar. USB of Serial in the bottom wight bar.
Click to expand...
Click to collapse
From this point, we know you have SPL 1.18 on board, with a locked ROM to a phone carrier.
Best advise I can think of is to get the official ROM from the carrier and flash that. It will get you back to starting point
After that, copy SSPL 1.16 to phone, and run that on phone, followed by falsh to Hard1.15MFG before trying to unlock the phone.
ok Rling .....
the phone was sent to me from Holland (Netherlands) and when i was turning it on on startup it show's a logo of number (1) or something like that.
so please can any one tell which carrier is that and where to find it ????
by the way Rling and Medget and every one ,thank u all for ur time u spend helping me ^_^.
Best Regards.
try to find your phone's original country in following website.
http://service.htceurope.com/htcdistributor/Default.aspx
then, you can know which language rom is suitable to your phone, try to find it.
flash the original rom
everything will be ok...
Good luck
Thank u 4 ur help Justsun i really pretiate ur help i found this link qaite helpfull and i managed to find the original carrier which is KPN and it's in Netherlands, the problem is, i do not understand any word in the web site because it's not in english and some how it look's like that there is no traise for the ROM in the site.
so please any one can help me with providing a link for the original carrier ROM of KPN or send it to my email or just any any thing just i'm feeling so disperet ...
Thank u all...
Yes Yes Yessssssssss at last Windows boot's up my phone after a long week ...
spesial thanks to homerh ... thank u bro without ur help i would throw my phone in the garbage. God bless u.
And thank u all for ur help.
Best Regards.
Saif Al.Deen.
sparketo said:
Thank u 4 ur help Justsun i really pretiate ur help i found this link qaite helpfull and i managed to find the original carrier which is KPN and it's in Netherlands, the problem is, i do not understand any word in the web site because it's not in english and some how it look's like that there is no traise for the ROM in the site.
so please any one can help me with providing a link for the original carrier ROM of KPN or send it to my email or just any any thing just i'm feeling so disperet ...
Thank u all...
Click to expand...
Click to collapse
you can go to www.htc.com then find suport, use your sn, you can download the original ROM. flash it first, then flash other rom which you need.
Thank u Justsun ,i just solved it by the help of Homerh and now i have the original ROM on my phone and by the way , i did not flashed it ,Homerh teached me how to restore the original ROM on the phone using the mtty and that's it. now i'm looking for a ROM that support Arabic for my HTC Touch Dual ,if u can help me find it ,i'd be pretiated.
Thank's.
Hi,
I have MDA Vario II, aka Herm300, aka Tytn ... My problem is that I've got "No GSM". So I got in forum and checked how to try to Fix it threads... So I tried by putting "Hard-SPL" and also I've tried to Upgrade "Radio", but every time when I start upgrade I recieve "Error 262" at 0%, I changed several Radio's but I had always same result. Also I've tried to downgrade to Official Rom of WM5 and it stops at 13% witn "Error 262" . So my Question is:
Is it possible that I have hardware problem not radio problem .
ATM it works fine with Schap's ROM as PDA and "No Gsm" Again ...
On Bootloader I got:
IPL-1.01
SPL-1.40.Olipro
If there is another solution that may help I'm open for advice.
classic brick...
wich one is the 262 error. (why to put the error number? write the entirely error!)
Dunno if it is brick, because I cant update with most of the roms and also I get error with every radio I try to update with ... I've tried with more than 10 radio's from the archive ...
P.S. I think it is Hardware problem + I got brick and because of the hardware problem i cant reinstal rom+radio or rom to repair brick problem ...
So wich one is the error??????
error 206 207 200768 i dont know...i have this issues too and the cprog.exe seems to be incompatible ... my cable hasnt a good contact to the usb plus the rom i had i didnt downgrade to wmoriginal in a few times...
-Mobile MDA Vario II - help my screen is four colours
Hi I have the same phone a T-Mobile MDA Vario II i ran unlock program HTC_Hermes_SIM_CID_Unlock_v3a - i must have run it wrong or something cause my phone has colours on the screen red green blue white with the ipl 1.01and spl 1.40 - it used to ipl 1.4 (ithink) and spl 2.14(i think) before i tried to run the hct_herm.....v3a.
Is my phone trashed or what can i do . when i plug in the usb cable the message at bottom goes from serial to usb but thats it - the active sysnc does not see the phone. help help help any advice welcome ( short of buy a new phone) this is my new phone i only got it a day ago.
tks