Hello, i start upgrading my O2 XDA NEO - Prophet G4 to Smart V3 and the power is cuted down, my upgrade is stoped.
Now i try to enter bootloader, i enter one time and try to install first WM5 RUU_Prophet_220734_2207114_024721_NVID but when i click next it displayed me ERROR IN CONNECTION and my Prophet goes OFF.
Now i cannot start it even in Bootloader, it is off i cannot turn it on, please help me what to do.
Thank you.
matrix_pr said:
Hello, i start upgrading my O2 XDA NEO - Prophet G4 to Smart V3 and the power is cuted down, my upgrade is stoped.
Now i try to enter bootloader, i enter one time and try to install first WM5 RUU_Prophet_220734_2207114_024721_NVID but when i click next it displayed me ERROR IN CONNECTION and my Prophet goes OFF.
Now i cannot start it even in Bootloader, it is off i cannot turn it on, please help me what to do.
Thank you.
Click to expand...
Click to collapse
Try this http://forum.xda-developers.com/showthread.php?t=292667
You might be able to come back to bootloader.
Related
...tried to unlockit with the athena-unlocker! After Step 1 it startet to Step2 und suddenly the connection was lost!
Now the battery lamp of the Ameo is in green mode!
I can make a factory reset, but I see no bootloader mode!
Screen is black an a green light aroundthe joystick! The Connection via active sync to my pc isn't available any mory!
What do you think?
game over - any change to bring my Ameo back to life?
Edit1: ther is no MiniSd Card inside
Hi, I do not think your Ameo is lost. Some else hat the same problem, please check http://forum.xda-developers.com/showpost.php?p=1358430&postcount=35 and try the steps described there. In most cases, it is also possible to flash WM6 if your device is stuck in the bootloader.
There are two things I would like you to try:
- To make a Hardreset hold the volume slider down and press the reset button.
- To enter Bootloader press and hold the camera button and press the reset button.
Do any of these work?
If any of these two works, you should be able to flash WM6.
...you were right - thx a lot 4 the solution
stupiddog said:
There are two things I would like you to try:....
- To enter Bootloader press and hold the camera button and press the reset button.
Do any of these work?
If any of these two works, you should be able to flash WM6.
Click to expand...
Click to collapse
At last -
That (your 2nd tipp) was the solution -WM& upgrade is now running on the ameo (now at 5%)!
Thx a lot
Jackpot thx -
Kisses from Austria
Many thx!
utakurt said:
At last -
That (your 2nd tipp) was the solution -WM& upgrade is now running on the ameo (now at 5%)!
Click to expand...
Click to collapse
You're welcome, have fun with WM6 However, if you want to kill the SIM-Lock/Net-Lock on your device, you have to run the unlocker again. It seems that WM5 has some problems running the unlocker while WM6 does not.
After you successfully run the unlocker again, remember to flash your WM6 ROM again (watch the battery power, it should always be >50% before starting flashing!) so you have the newest Radio version.
If problems persist after flashing, this page in the XDA wiki might be helpful: http://wiki.xda-developers.com/inde...e Athena Unlocker - the Black Screen of Death
stupiddog said:
There are two things I would like you to try:
- To make a Hardreset hold the volume slider down and press the reset button.
- To enter Bootloader press and hold the camera button and press the reset button.
Do any of these work?
If any of these two works, you should be able to flash WM6.
Click to expand...
Click to collapse
Hi, mate
Wot if those two things does not work??
i mean
if we can not get into boot loader or hard reset
i have this ameo does not go into boot loader or does not do hardreset
only red light on the joystick
problem occured while unlocking with Olipro, completing step 1 (got stuck at the point of saving the spl file)
thank you very much in advance for your help
BR,
Hi does anyone know if there are WM6 ROMs for the SPV C550 if not are there any good WM5 ones?
look topic about wm5 for hurricane, there are also links to wm6 for hurricane device
hello again
here is latest, almost perfect rom for hurricane:
http://rapidshare.com/files/56833250/566.zip.html
and new SPL for this device:
http://rapidshare.com/files/56616745/spl566wm6_spfans2006.rar
lazaj007 said:
hello again
here is latest, almost perfect rom for hurricane:
http://rapidshare.com/files/56833250/566.zip.html
and new SPL for this device:
http://rapidshare.com/files/56616745/spl566wm6_spfans2006.rar
Click to expand...
Click to collapse
Has anybody tried this ROM?
lazaj007 said:
hello again
here is latest, almost perfect rom for hurricane:
http://rapidshare.com/files/56833250/566.zip.html
and new SPL for this device:
http://rapidshare.com/files/56616745/spl566wm6_spfans2006.rar
Click to expand...
Click to collapse
Ideal thanks
So is the 566.zip the WM5 or WM6 rom and has it been tested?
Whats the new SPL?
hI ALL, can u tell me the mini guide how to install this rom? I did it once to my sda but I dont remember now, where is the nbfupdatetool and RUU and patched RUU..???
when I type l c:\wm6.bin it give me this:
clean up the image temp buffer at 0x8C080000 Length 0x01B00000 MTTYDownloadImageNot allow operation!
Error : DownloadImage return error (code = 0xFFFFFFFF)
cmd>
maybe damaged rom, or any idea?
Gang: Make sure you're CID unlocked. (Eg, when you issue "info 2", it says HTCSuperCID).
How can do that cid unlock? give me some working link to download that tool or something. thx
here you go
http//www.spv-developers.com/content/SPV-Services.zip
you must check "CID Tool (Alpha)" and click set CID=11111111
after this restart your phone
and short solutions about wm6 installing:
* installation is the same like typhoon
-unlock Super CID
-upgrade new SPL (Patched ruu)
-disable USB connection in ActiveSync
-switch off your phone
-press and hold camera button, and put USB cable to your phone
-next check "Y"
-when your phone will be in bootloader mode (tri color screen) run mtty
- check USB connection in this program
and write: - info 2
- format BINFS
- l c:\566.bin (localization of your rom)
after succeful installising reboot your phone and it will be end
rom is very good, baterry work better
hmm, thx for guide, I believe it will work, but I have little problem : now I cant even connect to activesync so I cant do cid unlock, any idea how to fix that
lazaj007 said:
here you go
http//www.spv-developers.com/content/SPV-Services.zip
you must check "CID Tool (Alpha)" and click set CID=11111111
after this restart your phone
and short solutions about wm6 installing:
* installation is the same like typhoon
-unlock Super CID
-upgrade new SPL (Patched ruu)
-disable USB connection in ActiveSync
-switch off your phone
-press and hold camera button, and put USB cable to your phone
-next check "Y"
-when your phone will be in bootloader mode (tri color screen) run mtty
- check USB connection in this program
and write: - info 2
- format BINFS
- l c:\566.bin (localization of your rom)
after succeful installising reboot your phone and it will be end
rom is very good, baterry work better
Click to expand...
Click to collapse
Thanks for helping out!
A few questions?
1. This link "http//www.spv-developers.com/content/SPV-Services.zip" takes me to Wikipedia.
2. Where can I find the patched ruu to update the spl. It wasn't in the zip file?
Thanks in advance!
to Mr MIAGY :
1. just write that link starting with www. (without http//, or type http://)
2. in ''wm6 for c550'' topic u will find patched RUU and all needed files, they are ziped together
gangstaunitg said:
to Mr MIAGY :
1. just write that link starting with www. (without http//, or type http://)
2. in ''wm6 for c550'' topic u will find patched RUU and all needed files, they are ziped together
Click to expand...
Click to collapse
DoH! I didn't notice the missing ":"
Cheers!
Anybody have idea why I cant connect to activesync after spl upgrade ? Before spl upgrade it all goes well. Can I do something with it?
if upgrade was complited succes then you must turn off USB connection in Active sync, then run bootloder mode and do everything with instructions.
I did it !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
THank u all, thankS
This rom is amazing, everything work perfect, and it looks beautiful,
one more time thank you. jUUHHHUUUUUUUUU
lazaj007 said:
if upgrade was complited succes then you must turn off USB connection in Active sync, then run bootloder mode and do everything with instructions.
Click to expand...
Click to collapse
Upgrade reported as success
However after reboot I see the WM6 boot screen - loverly ...
Then the Mobile Operator Splash screen ... THEN
After too long ... the phone switches itself off and I have to take the battery out to get reponse again.
Any ideas?
It's a C550 ....
MrMiyagi said:
Upgrade reported as success
However after reboot I see the WM6 boot screen - loverly ...
Then the Mobile Operator Splash screen ... THEN
After too long ... the phone switches itself off and I have to take the battery out to get reponse again.
Any ideas?
It's a C550 ....
Click to expand...
Click to collapse
Ok, so a report. The phone boots, goes through WM6 splash screen, then operator screen, then APPARENTLY dead black screen.
BUT I plugged in the USB cable and the screen came on! WM6 Setup screen! All good go through setup eveything looks GREAT!
Only problem is, if I leave the phone alone for a bout a minute, the screen goes black AGAIN. Then no amount of key pressing on the device will bring it back to life.
Plugging the USB cable in brings it instantly back to life! But This means I can't wander too far from my PC ;-)
ANY Ideas
BTW IT LOOKS FANTASTIC! If I can just get around this issue ;-)
MrMiyagi said:
Ok, so a report. The phone boots, goes through WM6 splash screen, then operator screen, then APPARENTLY dead black screen.
BUT I plugged in the USB cable and the screen came on! WM6 Setup screen! All good go through setup eveything looks GREAT!
Only problem is, if I leave the phone alone for a bout a minute, the screen goes black AGAIN. Then no amount of key pressing on the device will bring it back to life.
Plugging the USB cable in brings it instantly back to life! But This means I can't wander too far from my PC ;-)
ANY Ideas
BTW IT LOOKS FANTASTIC! If I can just get around this issue ;-)
Click to expand...
Click to collapse
Heh heh ... seems I'm posting to myself ... that's cool I like my own company ... So I reflashed the SPL and some of the problems have gone away.
Phone will boot OK now ... but it will still "go to blank screen" and require plugging into the USB cable to "wake it up"
I'm out of ideas now ...
If anyone can help me I just brick my ameo. I download olipro unlocker followed steps had everything done but after i finished the 1step it wont boot up again its just dead. tried hard reset alot of times wont even go pass it . it just light green.Pls help
Can you enter the Bootloader mode?
Press Camera Button (completely) and hit the reset button at the same time.
i know yor problem press cambutton and powerbutton for at same time so you will come to the bootloader modus now plug in your usb cabel to your device and your computer now open the image of wm6 that you want to install the setup will find your ameo now
hope you will get it
good luck from germany and sorry my bad englisch
Thank you that Fixed it. I just panic but now the whole process was finished. from 1-3 now. thank you for the reply
please help.
I have the same probleme and i can´t enter the Bootloader mode.
remove sim and storage card then do as mosho said
ie press camera, comms button and reset button then restore original rom , then olipros program
as per the wiki
http://wiki.xda-developers.com/index.php?pagename=Athena_Resets
cant get into bootloader
hello,
i cant get into bootloader at all.
i removed the sim and the memory card, al i get is a short flash of red light t the joystick, and only if the device is connected to the power cable.
it doesnt charge, it does nothing. i tried really everything.
does anybody have an idea?
thanks
mike
try a service exchange at t-mobile. there seems to be something wrong with your device.
my ameo had no probs running olipros unlocker.
regards dieter
i used the unlocker with another ameo i bought, and it worked fine.
so i tried the same with the 2nd, and it crashed.
will they find out that i tried to unlock the device?
regatds
mike
ameo dead
Hi mikekarl
we have the same problem that happened to me today.
i have done it before with another ameo worked fine.
Now i cant get into bootloader or Hardreset.
and i cant try a service exchange because iam not t-mobile customer.
Pls help
Hello,Every One
while upgrading htcx7500 the computer turned off
now i cannt enter to bootloader i know how but device dont respond
any help!!!!!!
Please
what about hard reset?\
and and ring round joy stick?
i was stuck in similer problem but later i discovered my battery was dead fortunatly i had spare battery it dose help
and you can try leaving it on charge and then press reset button on its on for couple of time before
if you get green ring round then hope fully u should be able to get it in to bootloader
my story is i am stuck in bootloader but dont know what to do next
DrForIslam said:
Hello,Every One
while upgrading htcx7500 the computer turned off
now i cannt enter to bootloader i know how but device dont respond
any help!!!!!!
Please
Click to expand...
Click to collapse
i
TRy Camera+reset~10 seconds) to get into the bootloader. if you get into the bootloader then you have two options. 1. if you did you unlock the device with Olipro's unlocker then you can flash any rom you want(only athena rom). 2. if not you have to find the official rom for your device then unlock then flash the Pk rom.
Good luck
Hello guys!
I have a big problem. I tried to flash HardSPL (via MemoryStick) on my raphael. After the flash process, raphael restart, but it starten with the tricolor screen and it shows me dthe massage "Upgrade ROM code error, please try again".
and a few seconds later raphael starts the proces again, after 3-4 tryouts the screen freez and now i can nothin do.
can someone help me?
sorry for my bad english.
best regards,
sasuke213
sasuke213 said:
Hello guys!
I have a big problem. I tried to flash HardSPL (via MemoryStick) on my raphael. After the flash process, raphael restart, but it starten with the tricolor screen and it shows me dthe massage "Upgrade ROM code error, please try again".
and a few seconds later raphael starts the proces again, after 3-4 tryouts the screen freez and now i can nothin do.
can someone help me?
sorry for my bad english.
best regards,
sasuke213
Click to expand...
Click to collapse
We need more info...
Is your phone CDMA or GSM?
Did you flash HardSPL from XDA?
Can you enter the boot screen and try to reflash the Hard SPL?
Problem #1 is that you need to flash hard spl off of a pc through a usb cable. Like it says in the thread (assuming you read it), you can't flash hard spl off of an sd card.
Try soft resetting, and see if the phone boots up normally. Did you flash the correct hard spl (incorrectly)? If you used a hard spl from the wrong device, the game may be over. My advice is to download the proper hard spl and to flash it according to the instructions in the thread.