Hy all,
I have updating my QTEK S200 to WM6 with Fantastic_b4 version. all step is good, the phone work.
but when i want to synchronize my contact avec my calendar with ActiveSync, i have an error : There is not enought free memory on your device to synchronize...etc
Whan i look my memory manager i have :
Program Free : 29.28Mo...
thank for your help.
I got exactly the same problem with 4.0.0.0.4 and directpush.
Erf.... Activesync problem ? WM6 problem ?....
the same problem (activeSync 4.5)
I have the same problem with activeSync 4.5 and 4.0.0.0.4s ROM and i can not open the contacts in the prophet.
Did you perform a hard-reset after flashing? It is essential.
Yes.... i have re installing my activesync...
ActiveSync Problem is solved!
Try to clear the storage.
After a automatic reboot it should function.
Settings -> System -> clear storage
I solved my problem in such a way.
greets
Frank
Related
I upgraded the TSM500 to 1.60a and everithing worked fine.
After running out of Battery the contacs and phone tabs on todays screen stoped working.
Syncronization failed and no way to use the himaupgrade tool as it fails when trying to delete old rom files.
The rest of the progras keep on runnig properly. :?: :?:
:idea: Any idea how to get the contacts, calendar and phone working ?
:idea: Any idea how to sync ? I can acces my device but not sync data !!
If not, how to get back to 2003se ?
Thanks for you help !!
Remove partnership on your pc and set up a new partnership.
Victor
Hello to everyone,
one of my installed applications (TT5) needed a patched file. After
installing this patch my phone and contacts does not work anymore
(more accurate: Phone & contacts apps does not show any GUI - it
doesn't matter how I start them).
After removing the mentioned application I tried a lot to get them work
again, but without success. I decided to reinstall WM5.
Now the buttons HW-buttons does not work. They try to start the linked
app, but nothing happens - the taskbar shows shortly the name of them.
Also they are not displayed by the taskmanager.
Everytime when I reinstall WM5 (HimaUpgradeUt) I recognized, that
previous installed stuff is still in memory.
My Questions:
How can I make a REAL CLEAN BLANK WM5 installation (inclusive other
memory parts, if the above mentioned patch was destructive to them)?
If you have any question, I will try to answer them here.
Thank you in advance!
Hi...
enter bootloader mode by pressing power button+camera+record+reset....wait for about 4 seconds,then the bootloader menu will appear...
U will have 3 choicesnavigate with the record button,change status with camera button,confirm with navigational pad)..
enable kitl----leave it no
clean registry Hive-----change to yes
Format Storage-------change to yes
RAGO :lol:
Thanks for fast reply.
This does not work for me... any other idea???
Current setup (I downgraded few minutes ago):
-------------------------------------------------------
WM2003
ROM: 1.72.01GER
Radio: 1.17.00
ExtROM: (-nothing entered here-)
Thank you in advance!
ur current setup shows that u don't have Magneto on ur device anymore....therefore,my 1st post instruction won't work unless u have WM2005 installed....
Magneto install softwares and data on Rom,so they are persistent memory and will survive even flashing....
now do the following:
-access the storage folder from ur explorer (not windows exp.) and format it....
-unlock or unhide extended ROM...the delete all data....
other way?....here u go:
-reinstall Magneto on ur device,then do what i advised in my above post....u will have a clean storage...then downgrade if u want.... :wink:
Good luck...
RAGO :lol:
Hello,
the past few days I was not at home...
Ok, I manged it. Thank you all for fast helping!!!
Have a nice week @all
Hi.
I installed 2 different released of WM6 (PDAViet 4.0.0.3 & Pda Mobiz 1.1i)
Then I've always the same problem synchronisation with contacts calendar and tasks doesn't works with activesync 4.5.
Also Contacts shortcuts doesn't run, open and close immediately.
Message box in activesync 4.5 :
"There is not enought free memory in your device to synchronize. Close programs that are running to free up memory, or restart device.
ID error : 800700e"
I restarted device and computer but I 've always the same problem.
Can you help me please?
radio rom : 2.69.21
Resolved but BT receiving files problems
I resolved my problem
A "Settings/System/Remove All Datas" solved it.
I can send from my device but i can't receive from Bluetooth.
raimsse said:
I resolved my problem
A "Settings/System/Remove All Datas" solved it.
I can send from my device but i can't receive from Bluetooth.
Click to expand...
Click to collapse
I can't receive from BT from my PC.
Message: "FTP SERVICE NOT AVAILABLE"
Happens with Fantastic 4b on Prophet G3
I got the same error. Start|Settings|Clear Storage, then it did a hard reset.
After boot, change regional settings, soft reset (the device ask for restart after the change from thai), stablish device name, change day and hour.
Sinchronize ok.
Hi there,
I have successfully upgraded to wm6. Or so I thought.
A pushserviceerror appears while starting the device. Thats no biggy, but I cant add any outlook contacts, nor can I sync them with my ones on the my vaio.
I used Charmer_Touch_GER_Beta_2.8 to upgrade.
Everything else is working fine.
Can anyone please help me?
Thx
nobody? How can I hard reset the device with wm6 on it. May be this could help.
outlook
I had the same problem
If you have a working window, just go to Setting->System->Clear Storage
push camera & voice button and soft reset button togehter...
after hard resetting, don't interrupt the following automatic setup of the phone...
( if you do, the porblem with the outlook contact liste will still be there... )
i know it from own ...
hi,
i flashed the ne salvy rom and now my activesync don`t connect anymore. it`s stuck and it says something about gathering settings. what can i do? i treid to uninstall and reinstal the driver in device manager but it won`t help. i also cant restore the pim backup. i use the 1.71 radio
edit : for some reason my firewall blocked some activesync connections. although i was able to install programms and browse files on the niki.
thread can be closed